Satellite A200 - 1 GB and the problem of build-in microphone

Similar Questions

• Satellite A200-1VP - Trackpad and the control volume

  Hello

  for the first time posting here so apologies in advance if I posted this topic in the wrong place or have not included all relevant information.

  My question is about a Satellite A200-1VP I bought recently from a friend. Model number PSAE6E-08D02YEN. The laptop has been completely annihilated and installed Windows 7 Ultimate before being redeemed.

  This seems to have brought the track pad and volume control to stop working.
  Are there drivers available that I could try to help to solve this problem?

  Thanks in advance.

  Hello

  I checked on http://www.toshiba.eu/innovation/download_drivers_bios.jsp Toshiba download page, and as I can see it, your machine is fully supported for Win7 32 bit, so you need to do is install all available drivers, tools and utilities.

  What version of operating system are you using (32 or 64 bit)?
  You have installed all the drivers?

• Memory of Satellite A200 - 12 X increases the problem

  Hello

  I have a Satellite A200 12 x (PSAECE) with Windows7-64 bit and I tried to increase its memory. This laptop has 2 GB (4 GB MAX), so I bought a 2 GB card to try and everything was ok. So I bought another stick of memory 2 GB, the same model as precedent, and after installing Windows said: installed 4 GB - 3 GB usable.

  My first thought went into the BIOS, so I tried an upgrade for him, but there are only two updates of BIOS for this laptop: Windows vista 1.8 (I have it) and Windows XP 5.2.

  Is there any way that I can take to achieve the increase in memory? or this upgrade possible memory to 4 GB was just a marketing hook.

  Thank you.

  David

  >... or this possible memory to 4 GB upgrade was just a marketing hook.
  How much RAM is recognized in the BIOS?

• Re: Satellite A200 with Windows 7 - the problem with the card reader

  I upgraded to windows 7 and now my card reader does not read some of the maps. I installed windows vista (utilities SD) card readers drivers but I can't install the flash cards support utility. in the installation is displayed: "serial number is invalid '.
  What can I do to solve my problem?

  Thank you and sorry for my English

  Could you give a product number? The product number is located on the underside of your laptop and looks like this for example: PSAE6E.

  Post edited by: Osman

• Satellite A200-13R: after installing the XP cannot use external microphone

  Hello

  I have A200-13R which comes with Vista Home Basic. Like most of my works under XP, I don't feel comfortable with vista. So I installed win Xp pro as a dual operating system. and I hv installed all the drivers downloaded from the Toshiba site.

  But when I use yahoo or other messengers system isn't identify if I plugged the external microphone. It uses only the inbuild mic with the system. I forgot to install something?

  Experts please help.

  Hello

  First of all there is no specialists but simply Tosh user ;)

  > I forgot something to install

  I put t think you forgot something to install. Only the audio driver is needed to get the sound and mic work.
  I presume that it s just a matter of adjustment.

  I recommend to check the microphone settings in the-> sound and audio devices Control Panel
  In the single tabs as audio and voice please check if the microphone has been selected.

  In addition, please be sure that mute mic worked in volume-> advanced-> control of the microphone.

  This will disable the internal microphone! To activate the external microphone, you must press the button advanced under the micro controller.
  In the new window called Advanced controls for microphone, you will need to activate select MIC2 and Mic Boost.

  Best regards

• Satellite A200-1AE (PSAEC) - when the new update would be available

  Hello.

  I have Toshiba Satellite A200-1AE (PSAEC) and the latest BIOS is since 2007.

  Toshiba means update?

  I think that old "deserts" Toshiba series and that he cares only for new.

  Unacceptable

  Hi mate

  Why should Toshiba BIOS update?
  There's a problem with your laptop that should be solved by the BIOS updated?

  To be honest, I don't know if the new update of the BIOS would be available for an A200 but if something would not would be not wrong with the old BIOS Toshiba provide an update
  One of my friends has a laptop A200 and its working properly

  Welcome them

• Satellite A200-22I - DHCP and SENSE of the problems when you start Windows Vista

  When I started my laptop yesterday, I noticed it was going quite slowly, more there was a message saying that windows could not connect to a specified service.

  As a result my firewall was off tour and I can t connect to the internet. I tried to turn on the firewall, but I couldn't... and today, I tried another connection to inalambric, but I couldn't connect to the internet.

  I checked the registry of the solution and the problem and found it was something related to DHCP and sense.

  But really, I don - t know what causes this problem...

  I searched other forums where people have had the same problem but I could t find any solution apart from reinstalling Vista...

  Can someone help me? Help will be very appreciated!

  Thank you

  Hello

  What do you mean with SENSE? I never heard tell about.

  I put t know what are the causes of the problem too but did you look in Event Viewer? Sometimes, it's really useful.
  If you have a network problem, you must update the driver WLAN or LAN (depending on whether you are using). You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  It would be interesting to know what Windows service, you mean. View more information on this error.

  Welcome them

• Satellite A200 - 1C0 - overheating and close

  Hello world:

  I ve got a Satellite A200 - 1C0 PSAE0E and since one month, it stops due to overheating (hybridized with hot CPU). The fact is that when I restart the computer to the BIOS screen, fan of the processor begins to work at a very high speed (to cool the CPU), but to start Windows to start the fan suddenly stops, and the fact is that the CPU is always at 78 degrees celsius.

  I tried updating the BIOS, reinstall windows recovery partition and all components, but it does not solve anything. Also tried to install Windows 7 and still nothing and windows Xp and still nothing. I Don t know what else to do. Help will be apreciated.

  Thank you very much.

  Hey,.

  To properly clean your cooling system, see this article from Toshiba:
  http://APS2.toshiba-tro.de/KB0/HTD7A01ZZ000AR01.htm

  Another reason could be the old thermal grease and maybe, it must be renewed. If t, you can do it yourself, ask a technician for laptop help! :)

• My Firefox exit and gives a "not responding" message once I used Google Mail. I tried to boot into "safe" mode and the problem persists.

  I have a question where Firefox wont ' quit and give a message "not responding" after I've been using Google Mail. It works fine when I'm not using this program. I tried Safe Mode and the problem still happens when I go on Google Mail, so it is not connected with modules, extensions, etc.

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions and preferences.

  • Sites Web open is not recorded in less than 25 versions of Firefox.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• I bought my iPhone 5 s by T-Mobile and 2 months left to purchase. My phone don't get re will not charge. Support Apple says this isn't the phone and replace the cable. This was done and the problem remains. Anyone who has experience of this pro

  I bought my iPhone 5 s by T-Mobile and have 2 months left on the purchase. My phone no longer accepts a new presentation. Apple support ran a diagnostic and said it isn't the phone and that I should replace the cable. This was done and the problem remains. Everyone has to experience this problem? And, if so, what was the problem?

  He likely is the phone, but you do Apple physically inspect it. Send it or take it to the Genius Bar. You can do one or the other of http://getsupport.apple.com.

• Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power Home). The phone is new (5 days). It's a m

  Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power + Home).

  The phone is new (5 days). It's a wedding?

  If you encounter this flicker, then the next troubleshooting step is to restore from a backup. If the behavior persists after the restore, then the last step is the factory restore. If after the factory restore and adding no additional content, you see always this problem, then you must make an appointment at the Genius Bar to the nearest Apple store or service provider authorized Apple to have the material examined. If the behavior goes after the factory restore, then sync again your content manually, without using the backup. It seems to me it's corrupted content in the backup.

  Restore your device from an iCloud or iTunes backup - Apple Support

  Use iTunes to restore your iPhone, iPad or iPod settings - Apple Support

• iPhone 5 activate without sim card and the problem is average insert a SIM card when sim carn as invalid sim

  iPhone 5 activate without sim card and the problem is average insert a SIM card when sim carn as invalid sim

  Fast pleas tell me

• I'm having the problem of local connection on my Dell PC with Vista. ISP is Verizon FIOS. FiOS representative told me to disable Ipv6 and the problem stops. Is this correct?

  I'm having the problem of local connection on my Dell PC with Vista. ISP is Verizon FIOS. FiOS representative told me to disable Ipv6 and the problem stops. Is this correct?

  original title: local area connection problem

  Hello

  1. What is the exact problem you are facing with local connection?

  2. how many computers have you plugged into the network?

  Please provide the information of network event logs to help you best.

  Click on the link below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-Windows-Network-Diagnostics-event-logs-to-solve-network-problems

  In the meantime, run the troubleshooter mentioned in the link below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

• Hello world! I'm french so if I speak wrong forgive me. For my work I need to buy adobe acrobat and the problem is I'll maybe change my computer, but not now. If I have installed adobe acrobat in my computer would it be possible to install the s

  Hello world! I'm french so if I speak wrong forgive me. For my work I need to buy adobe acrobat and the problem is I'll maybe change my computer, but not now. If I have installed adobe acrobat in my computer would it be possible to install the software in my future computer without purchasing another license that is to say with the same license that I bought?

  Yes, you can reinstall it on other machines, if you wish, without having to buy new.  A license allows for activating facilities on two machines and if necessary, you can turn off a machine in order to allow the activation of another.

• Hello I am a student and I have a problem with the tool Selection (V). When I opened the file AI CC with CS6 selection tool doesn't allow me to change the selection. What can I do? (I have reinstall AI CC and the problem persists)

  Hello I am a student and I have a problem with the tool Selection (V). When I opened the file AI CC with CS6 selection tool doesn't allow me to change the selection. What can I do? (I have reinstall AI CC and the problem persists)

  Ivan,

  If it's on the rectangular objects, you may have encountered the bug Rectangle Live which is limited to the MAC versions from 10.7 and 10.8, but not of 10.9 (Mavericks) or 10.10 (Yosemite). If all goes well, the bug will be fixed soon.

  Thus, a switch for the Mavericks or Yosemite with a reinstall might be the way to solve it here and now.

  To get around it, in each case, it is possible to develop direct Rectangles to get the normal old shaped rectangles or Pathfinder > unit, or use the scale tool or the free transform tool.

  A more permanent way round that is to create normal old shaped rectangles, after running the free script created by Pawel, see this thread with download link:

  https://forums.Adobe.com/thread/1587587