Satellite A200 - 1 L 5 PSAE3E-02300JIT problem with audio and integrated webcam

Similar Questions

• problem with the dell integrated webcam

  Hi guys

  I have dell inspiron 3542

  IAM facing a problem with my built-in webcam. whenever I run it it says connect a supported device.

  I use win 7 6

  bit

  Hi SAMAR-,.

  When the issue started? Which application you use for the webcam? Built in mic work well? The webcam is detected in Device Manager?

  Update the BIOS - http://dell.to/1TO5Xcf

  Run all windows updates and check again.

  Create a new account admin and check - http://bit.ly/1Bgok2R

  Run the test of the webcam and the microphone in pccheckup - http://dell.to/1NEc1Y4

  Restart button f12 system and press on start - choose the diagnosis. Let run diagnostic tests and if you encounter errors - take note of the full error even report for us.

  If the system is under warranty, write me a private conversation with the service number and contact details and attach a screenshot of the Device Manager with expanded imaging devices.

  Keep us updated.

• HP envy ultrabook 6-1070el problem with audio and HDD

  Hello

  I have a problem with my wanting to ultrabook 6-1070el running windows 8; I noticed that when food is attached, and the hard drive is written, speakers make a strange noise when I listen to something.

  This happens when the power is off, probably because the hard drive stops writing.

  Does anyone have an idea how I can solve this problem?

  Thanks in advance for the help,

  Alessandro

  allecaso2 wrote:

  Yes, I tried to move the power brick more away from the computer and the power supply is plugged into an outlet that is properly grounded, but the problem persists.

  However I thought to replace my hard drive with an ssd, so will increase the performance of the pc, and probably I'll solve the problem! Is the size of my hard drive 2.5 "inches, right?

  Hello again!

  There honestly not a lot to offer about the buzzing, other than what I proposed.  You are in warranty?  If so, you should let HP Support deal with the issue by giving them a call.  The number is 1-800-474-6836 if you are in the USA / Canada.  If you are in another part of the world, you visit HP's Support around the world to find the coordinates for your region.

  I believe that almost all laptop hard drives are 2.5 "then Yes.  Make sure you update your BIOS (here's a link) before installing the SSD.  Also, take a look at this document.  It is the Guide Service and Maintenance of your laptop.  It will help you to disassemble the laptop.

  Have a great day.  Let me know if you have any other questions!

• Problem with Audio and RAM Preview

  Hello

  I'm fairly new to After Effects, and I quickly fell on an Audio problem.
  OK, so I have a single pre composed sequence, and while in that order I can hear just fine video excerpts (press space), I can also listen to extracts Audio Only very well (by pressing (.) on the numeric pad keyboard) and I

  can also make a RAM with video and audio preview as well. But let's say that, when the RAM Preview load, and he started playing (video and audio, fine), let's say I want to pause the video in 10 seconds. I could do that just by pressing space, but then when I want to continue previewing RAM (by pressing 0, or by clicking on the icon), it is starts playing from the beginning and not from the position of my head from reading, when I stopped (which is 10 seconds).

  So my question is: how to take back the position of my head of reading RAM Preview?

  Keep in mind that I could continue the preview by pressing the SPACEBAR or (.) on the numeric keypad, but who would take just (in the first case), audio or video playback (in the second case).

  Thanks in advance.

  You have active current time in the Preview Panel?

• Satellite A200 - 13 M - XP x 64 - problems with the modem drivers and webcam

  Hello!
  I recently installed Windows XP x 64 on my laptop.
  I have two devices that do not work properly.

  (1) does anyone know how to get the driver for the built-in modem? There is no version the x 64 required for download.

  (2) the webcam does not work. I had a problem of 'Windows Image Acquisition': error telling me to put this service to activate the webcam. The problem is that this service is, by default, already activated.

  Thank you for your help.

  Hello

  You are right. 64-bit drivers are not available. Unfortunately, 64-bit version is not supported. To be honest, I'm sure that the modem is not so important for you and you can turn off this feature.

  I can't say much because I use the 32-bit operating system only on webcam.

• Problem with Audio and cannot restore. Error code 0 x 80070002.

  Have a Gateway FX 6860 under Windows 7 Home Premium.  Audio worked fine in the morning but in the afternoon (no updates being installed), I noticed that the sound speaker in the start bar had a red X.  Thought I had cut the sound, but the button mute on the keyboard had no effect (any more than the volume upward or down keys).  Roll the mouse on the icon gives "no speakers or headphones are connected.  Tried researching this issue after trying to restore the system (System Restore did not complete with each available computer restore point was [gave me every time the error code 80070002 x 0]).  I tried to uninstall and reinstall the device driver (no effect), I tried my repair disc (nothing), run a sfc/scannow (results indicate that there is no corrupted files).  I have connected my ipad for output wire to test the speakers (integrated in HP 2009 monitor) to check the wiring and speakers (they worked).  I ran the antivirus (AVASTI) software with no results.  Before that I have to empty everything and recover the system; is there anything else I could try?  Don't want to go through the entire re - install everything systematics for something simple.  What I forget?

  Hello

  Thank you for the update.

  You can try to install the drivers from the link below and see if that helps.

  Driver downloads &

  http://us.gateway.com/GW/en/us/content/drivers-downloads

  If this does not help then, try to perform the disk check and see if that helps. Run the disk check to find and fix errors on the disc.

  (a) click Start, type cmd, right-click cmd, and then click on run as administrator.

  (b) at the prompt, type chkdsk /f /r and press to enter.

  (c) try to do restore and check the result.

  For more information on 'Check a drive for errors' please visit this link:

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk be lost.

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• Re: How do I install Windows Xp in the Satellite A200 1 M 7 PSAE3E?

  Hello

  I have a laptop Toshiba Satellite A200 1 m 7 PSAE3E, while I am trying to install windows XP on the laptop, his watch no HDD installed. Can I get the * Raid * for the laptop? so that I can customize windows XP and detect the than hard drive to install it.

  Thanks in advance.

  > while I am trying to install windows XP on the laptop, its shows no hard drive installed
  You need to install the SATA drivers!
  The laptop supports the SATA controller and the drivers are not part of the Windows operating system.
  The SATA drivers are in the Intel Storage Manager!
  Read some threads here about this theme for more details! There are a lot of threads!

  > Can I get Raid for the laptop?
  No, because the phone doesn't support RAID controller.

• Compatibility problem with Vista and iTunes

  I downloaded iTunes 9 on my Tobisha laptop Satellite last night and put about 2.5 GB of music on it. I didn't upload the music from the internet. I used MP3s, I had for a few years.

  When I went to boot up the laptop this morning the loading process took some time, but it never loaded to the login screen. I just see the bottom of MicroSoft. Is there a compatibility problem with Vista and iTunes? Maybe I put too much music on my laptop?

  Boot in safe mode and delete iTunes and all the music I downloaded would solve the problem? Or it is less simple than that?

  Don't know where to direct this question if any help you could provide would be greatly appreciated.

  Thank you.

  Hello

  iTunes is compatible with Vista and there should not be any problem.
  Yesterday, I installed iTunes 9 on my U400 and everything happened correctly.
  If your laptop can not boot Vista correctly, then you should try the repair feature.

  Turn on the computer and press F8. Now you will see the advanced boot menu.
  Now, you have many choices.

  As a first step, you should try the option called: last good known Configuration (Advanced)

  If this will not help and the Vista will not start then try the option called repair your computer. This option displays a list of system recovery tools, you can use to repair startup problems, run diagnostics, or restore your system.

  If that does not help, then you will need to retrieve the unit using the Toshiba recovery disc or HARD drive recovery.

• Problem with IMovie and Quick time

  Hey everybody,

  I am faced with an unexpected problem with Quicktime and I Movie, and I was wondering if someone had already known that:

  I want to create a film based on shots from my personal camera. I started to work with IMovie to create a sequence of opening and added his musical band. I exported the scenes in Quick Time format without any problem. However, when I merge the exported sequence of I film with shots of my video camera, the soundtrack is completely eliminated.

  I checked on the Internet and saw that there might be a problem of "Codecs". To avoid this, I exported the sequence IMovie with Codecs of same as one of my video camera files.

  Now, if I compare the files exported from I Movie and those of my video camera, they have identical characteristics. However, the soundtrack will always disappear when I merge them.

  Could someone please help me solve this problem?

  Thank you very much in advance.

  Concerning

  Could someone please help me solve this problem?

  Not only based on what you already said.

  I want to create a film based on shots from my personal camera. I started to work with IMovie to create a sequence of opening and added his musical band. I exported the scenes in Quick Time format without any problem. However, when I merge the exported sequence of I film with shots of my video camera, the soundtrack is completely eliminated.

  How would you"merge" files? (I.e. a "QuickTime" format is any form of data compatible with the platform of supply and the specific structure of QT incorporated into real employment that is stored in a container of MOV file on any of up to 99 tracks possible). Also, what app do you use for reading the file 'merged '? (For example, some media players ignore secondary audio tracks as a result of some methods of 'fusion' of files so it is important to know how the files are "merged," whether or not the audio data are "scattered" several tracks, and/or if the Media Player supports playback of multiple, sequential audio popular.)

  I checked on the Internet and saw that there might be a problem of "Codecs". To avoid this, I exported the sequence IMovie with Codecs of same as one of my video camera files.

  The specific codecs and settings using the specific version of iMovie? (The current Mac OS X operating systems have two X QT and 'classic' Qt integrated structure so it is important to know what structure is used here and how).

  Now, if I compare the files exported from I Movie and those of my video camera, they have identical characteristics. However, the soundtrack will always disappear when I merge them.

  As a general rule, you should review the file "merged" to determine why it does not play back correctly rather than comparing the characteristics of the source being merged files. The main problem here seems to be in your project workflow. That is, you seem to be when you perform an operation in two steps rather than edit several iMove multimedia files and then export the combined results in a video the video and audio tracks have been flattened and exported in standard compression formats with unified settings, features and the.

  

• problem with Safari and the opening of sites

  problem with Safari and the opening of sites

  Please describe the problem in more detail?

  Try to reset the settings of Safari:

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select the Preferences/Privacy tab

  4. click on remove all data from the Web site

  5. close Safari.

  Remove cache Safari files:

  1. click on finder

  2. look for the menu GO to top

  3. click on GO and hold down the option key. This will show a user library folder.

  4. click library and find the Caches folder

  5. in the folder caches com.apple.Safari Ouvrezledossier

  6. move the Cache.db file Trash.

  This should solve the problem. If it does not help, try to disable the Safari extensions

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select Preferences

  4. find the Extensions tab

  5 disable all extensions of

  6. relaunch Safari

• Is anyone able to run Adobe CS5 with El Capitan now? I've read about problems with Illustrator and photoshop, but these seem to be in 2015 Octobe5. She improved at all? I need to upgrade that I am running an old OS v but I need to run CS5.

  I've read about problems with Illustrator and photoshop on EL Capitan, but these seem to be in October 2015. She improved at all? I need to upgrade that I am running an old OS v but I need to run CS5. Can not afford to go to CC. I have a Macbook Pro.

  CS5 and 10.11 are not supported and will never be supported by Adobe or Apple.

  However it works for some, more actually, but not all. There are sporadic problems with Illustrator, Photoshop seems to be the best. Do not expect an improvement and keep in mind that anyone from Adobe, Apple or anywhere else will fix it.

  Do a clean install

  Make sure you have the Apple Java

  h ttps://support.Apple.com/kb/DL1572?locale=en_US

  Make sure you have your serial number and if you are having problems with the serial number or the serialization however adobe of web server will not support your problem.

  update the application via photoshop.

• problem with java and pogo games

  I use mozilla, and now with the problems with java and hackers cannot play my pogo, what can I do? I disabled my java I tried java 6 does not work or is not safe, what is a safe way to play games on pogo using java?

  Pogo.com is determined as a website SAFE to use Java with Mozilla Firefox?

• I'm having a lot of problems with firefox and cannot figure out how to get help. It all started when I updated to 13. I get all kinds of advertising popups, I can't play a

  I'm having a lot of problems with firefox and cannot figure out how to get help. It all started when I updated to 13. I get all kinds of advertising popups, I can't play a game on FaceBook called Farm Town at all, and I get a popup of AVG on the cookies that I can't get rid of. These issues are causing me to use Chrome quite often, although I like Fox better. I've searched and searched how to get help and find nothing. How can I get personalized technical help? These problems will not occur in Chrome at all. Thank you.

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  You need to scan with all programs, because each program detects a different malicious program.
  
  Make sure that you update each program to get the latest version of their databases before scanning.

  • http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  • http://www.superantispyware.com/ - SuperAntispyware
  • http://www.microsoft.com/security/scanner/en-us/default.aspx - scan Microsoft Security
  • http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
  • http://www.safer-networking.org/en/index.html - Spybot Search & Destroy

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • http://support.Kaspersky.com/viruses/solutions?QID=208280684

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• Problem with youtube and other video sites

  I have a problem with youtube and other video sites:

  Everything is up-to-date (flash, FF, my plug ins.) but I get crashes when loading the video. I can hear the sound but I see only the first frame of the video.

  I've reinstalled flash/firefox or tried updating them again for about 4 times now and my cookies/cache has also been errased which i usually don't do. If i enter FF's safe mode it also freezes.
  

  I hope someone can help, I looked for answers on google before and I tried everything I saw, but it did not help.

  GRTS,
  agrash

  I had the same problem, I uninstalled the plugin Flash player (Adobe Flash Player 11.0.1 152) and the problem is solved. I installed the plug-in again and the problem came back. So right now I have no flas Player liked-in, but I don't have too much problem. I hope that I will not find another problem, but it seems that everything is OK.

• Problem with a simple integral

  Hi all

  I have 2 problems with a simple integral, and I do not understand how the first HP solves.

  My first problem is that if I add a constant before my variable, the answer becomes really weird.

  My second problem is that if I just change one letter (q becomes Q), the answer changes completely.

  I am attaching a picture of the calculations so that you can understand my problem.

  Thank you very much for your help

  Kind regards

  Xavier

  When you type wx you now have a variable named "wx" - not w * x which is what I suspect you intend. You must manually add a multiplication between them.

  When you use the Q, you are actually using the predefined global real variable that is most likely the value 0. If you've stored 2 in Q, I suspect that you'll get a different result. Remember that all variables in capital letters from A to Z and THETA and already defined as real numbers. VARS-> HOME-> REAL-press and you will see them.