Satellite A200 - 1 M 4 do not start and black screen

Similar Questions

• Satellite L775D-107 is not starting and black screen

  Hey
  I have a problem with my Toshiba Satellite L775D-107 and I hope you can help me.
  Since yesterday, my laptop displays a black screen. When I push the Start button, nothing happens, but you can hear it is aired but nothing more. a few hours before that I was working on it to Uni and everything was fine.

  I had the same problem a couple of weeks, and I read on the internet that he could help out the battery for 3 minutes and then press F2 and the Start button. Nothing happened, but after 2 hours I tried to start again and all of a sudden it started correctly and worked flawlessly.
  .
  Now I'm having the same problem again and I tried the same procedure but still nothing happens. Always the black screen and just the sound of the air coming out...

  I've got very important documents in United on this laptop, so I hope you can help me.

  Thank you in advance.

  Hey

  My L50 did the same thing. Sometimes, when an another Toshiba is nearby.

  Sombody bnows so this can't be helped?

  Mike

• Satellite Pro L300-21F does not start and the screen remains blank

  L300-21F is aged 18 months, so out of warranty. When you press the power button, you can hear the fan and a "click" but the hard drive does not start and the screen remains blank. The power and the battery on the headlight LEDs, but the switch light does not work. I checked the power supply and it is 19.3V and substituted a good known. Removed the battery, tried with just the power cord and still nothing. Pressing ESC or F2 when you press the button power does not bring to the top of the screen of the bios or any other message. I have concluded there is no power the jury. A friend he had its technology take a look and he concluded Council is probably a friend.

  So my questions are:
  1. He's probably right?
  2. is it a common problem with an easy solution?
  3. what else can do before shelling out for a new Board of Directors?
  4. is there a link where I can find how to disassemble the case?

  Any help appreciated

  Hello

  > 1. He's probably right?

  Yes, it looks like motherboard failure

  > 2. Is this a common problem with an easy solution?

  If it's a motherboard problem, the whole motherboard is replaced. Quite expensive part...

  > 3. What else can do before shelling out for a new Board of Directors?

  I don't think you can do anything with fried mobo

  > 4. Is there a link where I can find how to disassemble the case?

  Take a look at the site called irisvista.com

• Vista will not start! Black screen, no mouse, no cursor pointer. Startup Repair cannot repair. Details say 'wrong pass '. What is the correct syntax for pkgmgr to uninstall?

  Vista will not start!  Black screen, no mouse, no cursor pointer.  Startup Repair cannot repair.  Details say 'wrong pass '.  It looks like all the files are well intact on the disk.

  What is the correct for pkgmgr syntax when you try to uninstall an update by using a command prompt when starting Vista OS disk?  I entered the following in the "x:\Sources >" prompt:

  start /w pkgmgr/o: "C:\; /Up:Package_1_for_KB2840149~31bf3856ad364e35~x86~~6.0.1.0 C:\Windows.

  When I run this command it ends quickly and when I run 'echo %errorlevel%' I get '5', which seems to mean 'access denied'.  How am I supposed to have access to remove the patch?  Am I missing something?  Perhaps a switch in the syntax to access?  Help, please.  Thank you.

  I tried both options that you recommended.  As initially stated, no boot option would produce something other than the black screen.  I tried to boot from a drive and restoring the system running, but she didn't, and when I tried to do it again the recovery console could not find restore points. ?.

  An update, the computer is now fixed.  Oddly enough, I ran recovery of starting a drive at least 8 times and each time I checked the details and he said: he ran chkdsk without error and return to the same cause "a patch is preventing windows to start.  I even ran chkdsk c: /f from a prompt command from the recovery disk and it found no errors.  That's when I posted the question above after trying to remove the patch in the manner described above.  After some time and frustration, I decided to run chkdsk /r c:.  It took awhile, but it found 1 bad sector, moved the data, the bad sector tag and finished.  Once I restarted from that, everything came and went very well.

  So, the original question remains, what was missing in the command to run pkgmgr/high: successfully.  And the new question exists as to why start Recovery claims run chkdsk if it does not, or he turns the version/f not the version/r the same as I did manually?  It would be good to know for the future.  Thank you!

• Satellite A200-1 body weight does not start

  Hello

  I have a Toshiba Satellite A200-1BW model that frooze all to use and would not start again.
  I have checked all the power drive options very well.

  I have the blue AC power led on and the orange light but pc does nothing. I tried to power up without battery with AC, but always the same question.
  No fans don't come on etheir. PC won't in the start-up phase, and nothing appears on the screen that is constantly empty.

  I don't get the HDD 200 GB startng so I swapped it for a work of identical spare but the pc still does not start.

  My only conclusions are that I have a dead motherboard or a power problem internal.

  Its the real frist problem I've had with this laptop so am just checking to see if anyone out there has had the same problem or knows all the patches, I have not tried.

  Yes, that sounds like a serious hardware failure.
  Looks like the motherboard, GPU, or another party on the mobo may be defective.

  What about RAM modules? Did you check both?
  Please do

  Otherwise if there s no RAM issues then you will need a professional technician help.
  At the moment I put t see any other solution you :(

• Satellite A200 PSAF6A - Vista now does not start

  A200 PSAF6A - 02C01N Vista built-in HARD drive recovery

  My friend used this PC and she just closes without warning.
  Vista won't start now... Turn it on and it starts to load then apparently hangs on a blank black screen just before the Welcome screen.

  I tried to use Linux to access the drive to get its stuff out before you reinstall, but several different versions of Linux can not install Windows.

  I tried the system recovery running now the 0 key during startup, then releasing 0 when the pc started to beep.
  Starts the recovery of loading, then the screen goes blank for a while, then rises... error... F3-F000-0001 error code... Press ok to reboot.
  Press ok, error message will... screen is blank... drive hard HDD light shows work... but it is not closed.

  Tried to launch a drive to reformat Vista. Boots in the disk, loads the files then crashes, just like the original problem, on a white screen.

  Tried the XP disk running... works well until it gets to the part where you choose where you want to install... and said... cannot install on this pc it is no hard drive!

  Tried formatting disk with Gnome Partition Editor... It hangs in the review of the disc.

  I think the next thing to try is to throw the thing out of a tall building and see if it can fly...

  Anyone got any ideas?

  Hello

  HARD drive is recognized correctly in the BIOS settings?
  I think that the HARD disk is dead.

  Please check the last assignment under http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=140926
  Raver post the correct link in his assignment. Try to check the HARD drive.

• Re: Satellite A200 - 1 K 7 - does not start with 4 GB of RAM

  Hello

  I'm moving to 4 GB of RAM. According to the manual of my Satellite A200 1 k 7 supports up to 4 GB of ram.

  However, if I put two 2 GB modules the computer turns. Either one of the 2 GB on its own modules works fine, but both together won't work.

  The power led lights up, the hard drive whirs and then shuts. Nothing happens, not even a BIOS screen.
  My BIOS is updated. I'm using windows Vista 32-bit.
  The memory modules I use are the two SO-DIMM DDR2 PC2-5300 667 Mhz.

  Help, please!

  I don't know Mr. but as far as I know the Satellite A200 - 1 K 7 has an Intel 943GML chipset that supports 2 GB max.
  So you should check which chipset you have. For this, you can use PC Wizard 2008 (http://www.cpuid.com/pcwizard.php).

  If you have a different chipset, I think that the modules are not compatible and if you need other modules.

• Re: Satellite A100-011 does not start, a black screen at the beginning

  I have a Toshiba Satellite A100-011, which is almost 5-6 years. It suddenly started to behave abnormal.

  First of all, I started to get a 1-2 sec black screen when he was running. The screen was on and off occasionally.

  After a few days, I could not started upward from my windows xp sp3 operating system. I tried to start in safe mode with networking to see if I had a few spy, virus or something. I ran avast, hijact, ad-aware and some more, but not found anything.

  Later, I tried to format my laptop with a xp professional, but this time I can't see any reflection that passes more fun running and a black screen. I just got a black screen at the beginning and it does not start.

  I plugged on a television screen, and here I have started. I have re-installed all the drivers and formatted, but all I get is a black screen on my laptop at the beginning.

  What should I do now? Do you think I have a problem with my screen of HW or a driver problem with nvidia geforce go 7600? Maybe I'm missing something?

  Thanks in advance for all replies.

  If you can see the picture on the TV there are a few s laptop display problem. Y at - it some problem connection or display itself.

  You want to fix it yourself? You can disassemble the laptop?
  I mean if you have any experience with this kind of things that you should seek professional help.

• Satellite L500-1TC - does not start and the screen stays black

  Hello

  I have a Toshiba Satellite L500-1TC and since yesterday it no longer starts.
  The picture freezes and it restarted. Given that I can push the power button on my laptop and the LED indicates that it is on, but the screen remains black.
  No idea what I can do?
  The warranty is still active, so can I send it to Toshiba?
  Kind regards
  Sven
  (Sorry for my bad English)

  Hey Buddy,

  What you can try before you contact Toshiba official service is the following:
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

  If it doesn t work it seems to be a hardware problem, then contact an authorized service provider. If your laptop is under warranty, the repair is free :)

• Dv6 6155TX: laptop does not start. Black screen. LED, work of fan key, function

  Hi, my laptop is not starting, not even the BIOS or the manufacturer logo. I checked the RAM, tried to reset the CMOS battery, removed the HARD drive. At first, it worked for 2 - 3 times, but after 5-6 hours when I turned it on, it does not. I don't think that this is a display problem because windows key + B produces no beep. CPU fan works fine. Help, please.

  Hi, the problem was the corruption of the BIOS because of power failure. I have reset the BIOS of the USB.

  Thanks for you answers.

• MY TOP of DELL Dimension 1100/B110 DESKTOP will not start windows black screen of death.

  I had my computer when there was a power failure in a storm, it was on a surge protector but the next day I turned on the computer, it was clicking on and then he gave me a black screen with the time system and configuration system date drive and other different things, but no screen with safe MODE or something like that. and I have no enternet, here where I live. Help me please.

  MY DELL DESK TOP Dimension 1100/B110 STARTS at THE BEGINNING, GOES THROUGH THE MAIL. SO NOT ME NOT LEFT IN THE SAFE MODE SCREEN, IF I PRESS F8, IT GOES TO ANOTHER SCREEN WHICH ME SAYS THAT MY HARD DRIVE CANNOT BE FOUND. IF YOU GO TO ANYTHING ON THIS PAGE IT TELLS YOU THE "PRIMARY MASTER" PLAYER IS... HARD DRIVE. AND THE MAIN SLAVE DRIVE IS... OFFAND STUFF LIKE THAT BUT NO SAFE MODE OR ANYTHING. MY SCREEN IS A BLACK SCREEN. AND WHEN I START THE COMPUTER THERE AS A TRIGGER FOR A BIT BEFORE I GET THE SCREEN I GET. WHAT SHOULD I DO?

  Hello

  · You have the Windows XP Setup disk?

  You can follow the steps in the below links which will help you solve the problem.

  Link: "operating system not found" or "Missing operating system" error message when you start your Windows XP-based computer: http://support.microsoft.com/kb/321626

  Computer stops responding with a black screen when you start Windows XP: http://support.microsoft.com/kb/314503

  If you do not have the disk to the operating system, then you may need to contact the manufacturer of the computer. Link: http://support.dell.com/support/index.aspx?c=us&l=en&s=gen& ~ ck = mn

• Could not start - receive black screen

  Im having problems with my windows vista, I can't seem to start, I did close downs, restarts, and now I can't get it to work in safe mode. I don't know what to do, not the PC very warned.

  original title: when you start the pc, windows never starts, so I have a black screen, will only work in safe mode

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite A200 1 to 9 will not start

  When I try to turn on the computer there is no answer (although it was working fine yesterday). I tried to connect to the mains, and the light showing that it is plugged in, but still no response from the laptop.

  Any ideas?

  Trey to remove the battery and use the AC adapter to start up.

• Satellite L40 - does not start and the screen is completely blank

  Hey guys,.

  A good friend of mine has a laptop Toshiba Satellite L40, who died recently, and she has not been able to find the warranty documents yet, so I wanted to ask if maybe you could help.

  Basically, what's happened is that one day she was using the computer and not have noticed that it was not plugged in to charge, and before completely lost all power, the computer went into automatic hibernation mode.
  It plugged into the charger, the lights indicated that he was in charge. A few hours later she was trying to turn on, but nothing. the computer itself gives off a sound very low, as if turned on, but the screen is completely blank. She said that it's almost like she couldn't make the thing out of hibernation mode. He continues to give sound and some indicators remain lit until the battery is running out of charge.
  She has Windows XP is installed on the computer.

  Perhaps someone could help as to what is happening here? 1 million thanks!

  ME

  Hello

  Weird, but have you tried to remove the adaptor AC/DC and battery? Wait one hour and then reconnect the adapter AC/DC and battery. Maybe the laptop restarts.

  If this isn't the case, I think that you need assistance from an authorized service provider. It seems to be a hardware problem and the laptop should be checked by a technician from Notepad to determine the cause of this problem.
  On the Toshiba site, you can search the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck!

• A80 - 154 does not start - only black screen with strange resolution

  Hello!

  I have a big problem with the laptop. When I start it the power led and battery LED or power plug LED is blue (depending on what energy source is used, the problem appears both!). It's normal. But you don't see anything on the LCD screen. And nothing happens. Are lit, display is not black, no sound of the HARD drive or the fan. When I connected my external 17 '' TFT, he says that there is a signal, but the screen remained black.

  The signal has a resolution of 720 x 400 70 Hz, which is a very exotic resolution and a strange frequency! Anyone has any idea what it could be? I connected no matter what USB or other device. Only the laptop with or without the battery.

  Hello

  Well, it's not easy to say what may be the problem. I think it s a hardware malfunction, but I don t know which part might have a failure. Maybe it's something wrong with a CPU or memory modules s.
  In this case, I recommend to contact the service partner. He can do some tests.

  Good bye