Satellite A200-1 t 8 - HDMI not working not

Similar Questions

• Satellite A200 - 1 MB microphone does not work on Windows XP

  Hi all.

  I buy a Satellite A200 - 1 MB and when I install Windows XP everything was ok except a little problem:
  The microphone does not work.

  I installed all the drivers correctly, but the problem is the same.
  I read on the internet that many owners A200 - 1 MB have the same problem.

  Is one know how I can fix the problem?
  Thank you

  It's very strange. I installed Windows XP Home SP2 on Satellite U300 edition. It's the same laptop fine but a bit smaller and in my case works cam and microphone. I tested it with Skype. The sound quality is not very good, but it works.

  Are you trying to test also with Skype? Did you check the sound options?

• Satellite A200-1tw psae6e - USB ports not working not

  I use windows 7 ultimate on Satellite A200-1tw (psae6e-06u030du) and my usb ports no longer works correctly.
  In fact they recognize certain usb devices, but not all (for mouse and printer example work, but my USB does not work)

  Looking at the Device Manager, everything seems OK... No problem!

  Does anyone have a solution for my problem.

  Thanks :)

  Hello

  Try resetting the USB ports. This means that you need to remove the USB ports/hubs/controllers in Device Manager.
  Then, you have to restart the laptop to get new USB ports.
  In my case it has worked.

  By the way; I recommend upgrading the chipset driver and disable the feature for each energy-saving usb port.
  This can be done in the Device Manager-> port USB-> properties-> tab to save energy

• The Satellite A200 display driver update do not work

  I tried to uppdate the displaydriver of my Satellite A200 (PSAE0). I downloaded from toshibas website. 7.14.10.1461 driver version. (vista 32 bit).
  But when I try to install the exe, I received a message that the computer do not have the minimi requirements to run the program.
  What could be the problem?

  I tried to update the driver removes I can't get any picture in WinTV, only sound. Used with the Hauppauge Nova-TD USB tv card.

  If you have installed some drivers Nova-TD or software I think you have screwed something.
  Achieve the clean OS install and you will see that you will need to install the driver to display without any problems.

  In my opinion it is certainly not a driver problem. The same driver, you can find in the recovery image and all proposed pilots are tested. So the problem must be something else.
  A few weeks ago I ve made some experiments on Satellite L500 nine friends. I tried to install the tuner TV USB Toshiba and Savvy TV software. Later, when I tried to run the software, I got message that laptop has not enough RAM or something like that.

  Something wrong with all this. Using other applications, everything works perfectly.

  So I think that there is something wrong with your software and additional hardware.

• Satellite A200 - 19K - overheating/fan does not work

  These 2-3 days, my Satellite A200 - 19 k (PSAECE) was himself cut and was not very hot. I installed SpeedFan, but it does detect any fans. In addition, the fan on the base of the machine is not working. Anyone has any ideas for a solution?

  Any help is much apprieciated.
  Thank you

  Hello

  In this case there is not one any magic solution. Overheating is a very serious problem for me. I see two possibilities here: either is dirty cooling grill and the laptop cannot be cooled correctly or there is a mechanical problem with cooling fan.

  If you really think that cooling fan is not working properly please contact the authorized Service partner as soon as possible. I imagine that the laptop has guaranteed valid and if the cooling fan is defective it will be exchanged free of charge.

  This is serious problem and please, do not try to do some experiments, but be sure that the hardware of the laptop is not defective.

• Vista Ultimate on Satellite A200 PSAE6 - FN buttons do not work

  FN + F1, F2 keys do not work for me computer laptop Satellite A200 (PSAE6), installed Windows Vista Ultimate... F 12.

  I downloaded driver Package of added value, but support for the combinations given did not appear.
  Write the reference where it is possible to download the driver. The version of bios is installed later.

  It is desirable, that there are Russian support.
  Thank you.

  Hello

  All available, drivers, tools and utilities can be used with every version of Vista. What is important that all these things must be installed in the order of good facilities. Here, the order of the facilities.

  Windows Vista
  Intel Crestline Chipset utility
  Robson Packege (Intel iMSM Driver)
  Intel Crestline GM driver
  nVidia Display Driver
  Realtek ALC268 Audio driver
  Realtek 8101E 10/100 / Driver LAN Gigabit 8111
  Synaptics Touch Pad Driver (with LuxPad) V9.1.19.0
  ALPS Touch Pad Driver V7.0.301.4
  TI Multiple Digital Media Card Reader V2.0.0.7
  TOSHIBA software modem
  Driver Intel LAN wireless Golan/Kedron
  Wireless LAN driver
  Camera V1.7.130.0330
  Bluetooth Stack for Windows by Toshiba V5.10.06T
  Bluetooth Monitor V3.01 (Build 20070215)
  Enbeded IR V0.0.0.6C
  TOSHIBA Value Added Package V1.0.17
  TOSHIBA Flash Cards Support Utility V1.48.0.3C
  TOSHIBA Hardware Setup Utility V1.48.0.9C
  TOSHIBA Supervisor Password Utility V1.48.0.8C
  TOSHIBA SD Memory utilities V1.8.1.1
  TOSHIBA Fingerprint Utility V5.6.0.3284
  TOSHIBA ConfigFree V7.00.27
  TOSHIBA Assist V2.00.03
  And so on if something is missing from this list.

  See Russian Toshiba page for Russian support.

• Satellite A200 - restore factory setting did not work

  Tried to restore my Satellite A200 to 'out of the box settings', but it did not work.

  It comes up with the message to put in the windows installation disc, so I put in the recovery disc, but nothing is happening outside the laptop suddenly turn off!

  Its windows vista.
  Any ideas anyone? x

  > It comes up with the message to put in the windows installation disc.
  Description of your problem is a little confusing.
  When you want to install the recovery using recovery DVD image, you must boot from this DVD and not wait for some message that tells you to insert the recovery disk.

  Follow these steps:
  # Turn on your laptop, press F12 to get into the boot menu
  # When the start menu is displayed on the screen put the recovery DVD in the optical disc drive
  # In the start menu, choose the CD/DVD drive and press ENTER. This will force ODD to run as first boot device.
  # Follow the menu on the screen.

  When you see option for recovery just language confirm with NEXT and continue the installation of recovery.

• Satellite A200 28H: F6 floppy will not work when installing XP

  Hello

  I am trying to install Windows XP pro on my new laptop (Satellite A200 28 H), and since it needs driver SATA, I downloaded the driver suitable for my laptop (Satellite A200 28 H), put it on a floppy disk for use with a USB floppy drive (which works fine), press "F6" when appropriate and everything... But it simply doesn't. I had training as a technician for a few years, so even thouh that is no longer my work and I might be a little rusty, I think I still know at least a little what I do... Well, apparently I'm more image than I thought!

  I've tried several things, and this is what I get:

  * If I don't use all the disks, Windows XP will not find the hard drive. Which was intended, no problems here, don't except for the fact that it is completely useless for me :)

  * If I force the driver on the floppy disk, despite Windows tells me that is already a driver that can be used, then within 10 seconds I get a BSOD with the stop message 0x7B (found or inaccessible boot device).

  * If I use the floppy drive, but do not force the driver and listen instead of Windows ("oh, you already have a driver? ("OK, then, use and too bad that diskette"), I can actually finish the installation process. Windows will copy all the necessary files on the disk, it will even restart correctly after that and moved on. But when the installation is complete, the computer will restart, I'll see the loading for a second screen, and then, BSOD stop 0x7B again.

  I'm sure I downloaded the driver for my computer. In fact, I also tried a couple of bad drivers too, just to be safe (IE I use Intel Matrix for ICH8M, but I also tried the ICH7M to be sure), I tried with drivers downloaded from the Toshiba site, on the site of Intel and whatnot-other-website-for-newbies-or-powerusers, and I still have the same behavior as described above.

  I tried partitioning / formatting during installation, and I also tried leaving the file system intact. If I do the latter, the only difference is that I have offered 2 possible OS to boot from, the two being Windows XP and both failed miserably.

  It's probably worth mentioning that, if I use the recovery DVDs and start over and clean with Vista, I have no problem whatsoever, except for the loaded gazillion process during startup, the RAM already used half and applications useless hundred I don't give a darn on... And the fact that some applications that I need work just can not be installed on Vista.

  If anyone has any idea how to solve this problem, I would be very grateful!

  Hello

  The procedure, including the SATA drivers in Win XP using the external USB floppy drive is very easy.
  First you need to download the Storage Manager and having to put on the diskette.

  During the installation of Win XP you must press F6 for inclusion since the external floppy drive and follow the new instructions on the screen.

  _Note; _
  Very important is that your XP CD Win would contains SP2!
  Without SP2 a BSOD can appears and could break up of installation!

  Don t format or don t create all partitions after the installation of the SATA driver. It can erase the installed and included from HARD disk SATA driver.

  Last but not least some readers of external floppy drive are not supported. I read that some users had some problems with an external FDD drives they tested another drive and it worked finally

  Check the recommendations may indicate that it might be useful

  Good bye

• Satellite A200-1ZF: FN keys do not work on Win XP

  Hi all.

  I'm new arround here, and I have a question on my new laptop.
  I have a Toshiba Satellite A200 laptop 1ZF, and I installed windows xp.
  I could install most of the drivers (including the touchpad, webcam, bluetooth, etc.), but I can not do with the fn keys.

  Does not work.
  I am pressing fn + F5 or F6 for the light, and nothing happens. In addition, if I can, I want this window of Vista to show when I want to use the FN combination keys.

  Please, can you help me?

  I think I can help you
  This is a known issue for me I m an owner of a series of Satellite A and from time to time I m here in the forum and I read the interesting discussions

  I found an answer to your problems, it seems that there are two versions of the BIOS;
  A version of Win XP and one for the Vista operating system.

  If you use the Win XP on your laptop you must update the BIOS to the XP version. This will help to solve the problem with the FN keys

  Someone here in the forum posted this solution and I think it should help you too.

  Best regards and have a nice day ;)

• Satellite A200-13O - USB port does not work

  Can you help me? I have a new Satellite A200-13O, USB does not work.

  Hi Gilbert

  What do you mean exactly with the USB does not work?
  You plug the 3rd USB external devices advantage, which cannot be recognized?

  Have you installed all necessary drivers for these devices?

  What operating system do you use? If you are using Vista are you sure that the external USB device is compatible and supports the Vista operating system?

  Please post more details!

• Re: Satellite A200-1IZ - FN buttons do not work

  Hello!

  I have Toshiba Satellite A200-1IZ and I install the new version of Value Added Package 1.1.7. and the FN does not subsequently.
  I reinstall but I have the same problem.
  Why?

  I speak very good English, sorry...

  Hello
  You must install the utility to Support Flash Cards 1.49.0.2C
  The Support of Flash memory card utility is required to use the Toshiba Flash Cards (FN + F keys).

  In addition, you will need to use the good BIOS.
  If you use Vista then you need to update the BIOS to 2, 60-WIN32 (both the new version)

  See you soon

• On the Satellite A200-1CR wireless connection is not working properly

  Hello

  I have a problem with my wireless connection. In spite of I stay close to my router I can't access the Internet.
  If I have the connection, it is the level of 1 to 3 (5 is best).
  I have the same problem with "hot spot". I can't access the Internet or use only messenger, can't surf the Internet, check my emails, etc..
  Another person do not have this problem in the same places. They can access the Internet. What's wrong? Can you help me?
  I have a Satellite A200-1CR.

  Piotr

  Hello

  For most Wlan issues are related to problems of compatibility between the wireless network card and the Wlan router.
  Sometimes the Wlan driver allows to obtain the best performance.
  So, try to update the WLan driver first. Maybe it helps.

  Good luck

• Satellite A200 - Sierra data card is not working properly because of the com port

  Hello

  I recently used a sierra on Satellite A200 computer laptop data card and devices Bluetooth is to share with the data card com port and lead to the client cannot find the data card.

  I tried the data card in lenovo t61 and another computer laptop manufacturer, all of them are working properly.
  The question seems to casue of the Satellite A200 laptop.

  Everyone meets it or advice please!

  Thanks in advance!

  Hello

  The data card Sierra uses the same ports com as the internal module of BT?
  Well, in this case, you have an opportunity:
  You can assign the different port com on the data card Sierra

  Check if this is possible in the Device Manager.

  On the other hand, you can try to install first the data card Sierra, then BT stack
  Perhaps it would be too much work

• Satellite A200-1 body weight does not start

  Hello

  I have a Toshiba Satellite A200-1BW model that frooze all to use and would not start again.
  I have checked all the power drive options very well.

  I have the blue AC power led on and the orange light but pc does nothing. I tried to power up without battery with AC, but always the same question.
  No fans don't come on etheir. PC won't in the start-up phase, and nothing appears on the screen that is constantly empty.

  I don't get the HDD 200 GB startng so I swapped it for a work of identical spare but the pc still does not start.

  My only conclusions are that I have a dead motherboard or a power problem internal.

  Its the real frist problem I've had with this laptop so am just checking to see if anyone out there has had the same problem or knows all the patches, I have not tried.

  Yes, that sounds like a serious hardware failure.
  Looks like the motherboard, GPU, or another party on the mobo may be defective.

  What about RAM modules? Did you check both?
  Please do

  Otherwise if there s no RAM issues then you will need a professional technician help.
  At the moment I put t see any other solution you :(

• No sound on the TV LCD Satellite A200 is connected via HDMI

  The problen is: I connect to laptop (A200) for LCD TV (Philips) by HDMI. The video is OK, but his stay on laptop not LCD TV.

  Maybe the problem is THAT HDMI 1.2 does support audio and video not together? Only 1.3?

  Sorry for my English

  Hello Maria

  I have connected successfully Satellite A200 to my 32 LCD TV with success. Be sure to use high quality cable. As Gantz has already written sound can be enabled in the sound properties. When the cable is connected on the reading tab, enable HDMI output.