Satellite A200 - 19K - overheating/fan does not work

Similar Questions

• Satellite Pro C650 - cooling fan does not work

  My Satellite Pro C650 overheats and stops automatically within 20 minutes of leaving upwards. I checked the CPU fan and noticed that it does not turn upward, even if the laptop would become very hot. I tested the fan with a 9 volt battery and it works perfectly.

  Can someone tell me exactly what the problem is? And how to solve it.

  Thank you.

  > Can someone tell me exactly what the problem is?
  On this virtual path, no one can say with certainty what the problem is. We can only speculate what may be the problem.
  Usually, cooling fan starts immediately after starting the laptop slows down and offers the optimum temperature of material. After reading your ad I didn t understand how it works. He turns and there is no sign of life?
  Problem can be power.
  Cooling fan will be controlled by sensors of temperature and activity depends on the temperature of the material but if your machine cooling fan does not work, I imagine that there is no electric power.

  What do you think?

• Satellite P850-30W - the fan does not work after returning from the mode "Eve"

  I have a Toshiba Satellite P850 30W with bios 1.90.

  Sometimes the fan does not work at all after back mode standby on windows 7.
  What happened twice (perhaps several times without knowing me), and Ive had the computers for a month.

  Normally the fan starts to run when the CPU gets more than 50 degrees celsius and stops less than 50 celisus...

  I tried running Prime95 when this fan-this occurs and the time of the computer got dangerously high (near 100 degrees)! the fan did not start at all
  .. .This error could damage the laptop potentinally...
  to get the fan turns once again I have to restart windows

  anyone experienced this?
  I guess that the fix would be to never use standby... or toshiba needs to fix it with an update of the bios.

  > Sometimes the fan does not work at all after back mode standby on windows 7.
  > What has happened twice (perhaps several times without knowing me), and Ive had the computers for a month.

  You said it's happened twice and only sometimes done this means that above all the fans are working well?
  In this case, this would mean that it of difficult to reproduce this problem, but you might be right: maybe a BIOS update would help solve this problem permanently

  I found some discussions on the stand-by mode and fan activity and in most cases, the update of the BIOS was the key.

• Satellite A200 - 1 MB microphone does not work on Windows XP

  Hi all.

  I buy a Satellite A200 - 1 MB and when I install Windows XP everything was ok except a little problem:
  The microphone does not work.

  I installed all the drivers correctly, but the problem is the same.
  I read on the internet that many owners A200 - 1 MB have the same problem.

  Is one know how I can fix the problem?
  Thank you

  It's very strange. I installed Windows XP Home SP2 on Satellite U300 edition. It's the same laptop fine but a bit smaller and in my case works cam and microphone. I tested it with Skype. The sound quality is not very good, but it works.

  Are you trying to test also with Skype? Did you check the sound options?

• Satellite A200-13O - USB port does not work

  Can you help me? I have a new Satellite A200-13O, USB does not work.

  Hi Gilbert

  What do you mean exactly with the USB does not work?
  You plug the 3rd USB external devices advantage, which cannot be recognized?

  Have you installed all necessary drivers for these devices?

  What operating system do you use? If you are using Vista are you sure that the external USB device is compatible and supports the Vista operating system?

  Please post more details!

• Satellite A200: DVD/CD player does not work

  Excuse me
  I bought toshiba A200.
  After two weeks my DVD/CD drive does not work.
  So I deleted the a±ts driver and then I do not want to install the driver.
  Please help about this.

  Hello

  Don't be angry with me, but your ad is not a little clearer!

  However, the CD/DVD drive uses and supports the common drivers Windows Vista (or XP)!
  You n t need any special drivers to recognize the STRANGE

  In your case I would recommend going to the Device Manager and remove (uninstall) the CD/DVD drive.
  After this procedure, restart the laptop.
  The Vista operating system should recognize the new device and must be reinstalled the drivers automatically

• Satellite A200-1UQ - battery charger does not work

  Hello

  I myself 1UQ A200 and my battery charger does not work.
  BTW Im from Türkiye.

  Can find the original, if I can't use universal battery charger?

  Thank you

  On the Toshiba site, you can search for a compatible charger and the reference number:
  http://EU.computers.Toshiba-Europe.com-online services & -online Options of PC Accessories devices & -Online Homepage Options & accessories PC

  If you have the part number, you can search with Google for this number. If you can t find something, you need to contact an authorized service provider. They can order all the parts of Toshiba.

  I hope I could help a bit.

• Satellite A200-1AX: many applications does not work under Vista

  Greetings,

  I bought A200 1AX a few days ago and I'm not having a good experience with regard to the installation of applications on this Vista box. Even install yahoo messenger did not work and produces the NSIS error. 3D max 9 installation does not work (even though some have managed to operate); Install Adobe CS3 (supposed to be for Vista) did not entirely - the photopshop component have not installed, etc.

  The bottom line, I plan to move to XP OS. Means the required BIOS update I have my Vista recovery CD will NOT work after the switch to XP?

  Thank you for your feedback.

  Best regards, Ashraf.

  Unfortunately I put t know how to help you.
  Usually, if the 3rd party applications are designed and support the Vista while there should be no problem with unique program facilities.

  Check if all software packages are completely cared for and compatible with Vista.

  > The necessary BIOS update means that I have my Vista recovery CD will NOT work after the switch to XP?

  No, after the update the BIOS of XP, you will still be able to use the Vista CD from recovery, but perhaps some functions such as the FN keys will not work.

• Satellite A200-1AX function key does not work do not

  Hey all

  I have installed XP a few weeks back and updated the bios to the xp version
  I didn't like it and I went back to vista but now my function does not work.

  I press and press the screen brightness but controls no longer appear and I have to use manually with my mouse or via the mobility Center
  is it because of the bios? I downloaded the new bios for vista and now it says that the rom space is full and closed unexpectedly

  What should I do? Help much appreciated

  Hello

  The problem is that you must update the BIOS to the XP version if you want to use all the features of the laptop on this laptop.
  After installing XP, you must update the BISO XP, and then you install all the drivers Toshiba XP available and public services.

  This should help.

• Satellite A200-1ZF - FN keys does not work in WIn7

  Hi all.

  Does anyone had the same problem on the keys FN on A200-1ZF?
  I reinstalled the operating system, Windows 7, and after installing all the drivers, I can't change the light from the screen by pressing FN + F6 or F7.
  Also, does not any option with FN key combination.

  Does anyone know how to solve that?
  Thank you.

  Hello

  I m A200 not owner but I A210.
  I could get the Fn keys work in Win 7.

  First in landed the VAP for Win 7 and then I installed the Toshiba Flash Cards for Win 7 support utility.

  I downloaded both the European driver Toshiba page tools. I chose the tools available for Satellite L500.
  You should try this too.

• Satellite A200-1HV - sleep mode does not work

  Mobile coverage, close to the entrance in a sleep mode or a closing standby mode will be in condition is not clear: snap buttons it does not return to normal mode, toggle switch does not burn and portable starts is strongly heated.

  To force it to work, it is possible, only if to press power. But this work comes at the end not properly!
  As at the end of work with included food supplies specifications it is not turned off and reset product. Rearrangement Vista did not help.

  Please, say it's possible to do.

  I'm sorry for English.

  Hello

  sounds like a serious problem of material. I recommend that you send your machine to an authorized partner and leave check/repair your machine.

  Maybe some defective power supply on the motherboard.

  To find the authorized service partner nearest to your country please visit:

  http://EU.computers.Toshiba-Europe.com/

  go to support and downloads-> support home page-> of repairs maintenance &-> 'find an authorized service provider.

  Contact them and tell them the problem.

  Welcome them

• Satellite A200-1VM - SD card does not work

  SD card does not start.
  I already have SP1 and in Device Manager SD card appears with "!" when a card is inserted and is not, when it's empty.
  When I insert a card inside it says does not start code 10 but I see the led blink whenever I put a card inside.

  Can anyone help?

  Error code 10 said that the SD card driver was not installed correctly or device couldn t load the driver.

  In any case, you should definitely try to reinstall the driver from SD card.
  First go to Device Manager and uninstall the old drivers.
  Then install the driver again, downloaded from the page of European driver of Toshiba.

  Finally, restart the laptop and try again!

  Good luck

• Satellite A30 - 404 - the fan does not work

  I have a Satellite A30-404 for a couple of years now, and recently I saw serious problems with my laptop.

  Let me start from the beginning:

  My laptop has been a few months, when he suddenly stopped, I contacted the helpline and they picked up the phone and fixed.
  Again, a few months later, it happens again and I call them, they tell me that the problem is caused by the dust accumulating on the radiator of the laptop.
  I used a vacuum among fans to clean dust.

  When I do that, indeed, there was a lot of dust coming out, so I made this process, I realized a few months and the laptop remained very well.

  A few months ago, when vacunuming the pc again once I heard something breaking and I soon realized that all the components of one of the fan where gone.

  Probably one of them broke and since it had to be rotated at high speed he stopped and beat all the others. So I had 2 broken fans 1. I realized that in the long term that my processer could be destroyed because it did not good cooling. Since then the processer would become very hot and consumes much more energy than normal.

  Now, I also have the problem that whenever I turn on the pc it starts slowly draining battery (its plugged into the power supply). It's like I have a giant battery, the laptop power and eventually it will turn off. I also tried to boot the pc with no battery at all and it works very well for a while, but then it turned off suddenly. I try to turn on the pc and after 1 or 2 seconds it stops again. I don't know if its related to the fact that the processor is damaged boats.

  I talked to a lot of people in order to get the fixed fan but they say it can become very expensive since its hard getting the same fan. And by the way, when I work on the computer with only the battery that it depends on almost an hour

  Any suggestions? Help, please

  EDIT: I turned of the auto in hibernation when the battery is low to see what is happening, the energy of the battery indicates 0%, but the laptop stays on.

  Hello

  Well, you should be cautious if you use the vacuum cleaner to clean the fans. It is risky!
  Extra ball bearings might damage if the fans turn too fast.

  So if you have no experience with these procedures you should t do.
  The person with the experience as a technician workbook must clean the fans and cooling modules.

  I agree with Doomlord, and it seems that you need a new cooling module.

• Satellite P100-145 GPU fan does not work!

  Hello

  Is there a solution to this problem yet? He started only since I upgraded my wood to 3.80. The base gets so hot on the right side and it is even radiant heat through the top panel on which my wrist/hand rests.

  Not to mention it will slowly destroying components inside. I was running a game more early to test the fan and it would not turn on just once! It was so hot! At least 100 deg/c!

  I am wanting to downgrade the bios but cannot find anywhere on the sites of toshibas. Can someone provide me please with details on how to get a bios earlier? 2.40 would be great. Back to factory settings and especially on FAN!

  I have the Satellite P100-145. It was great at first... until I found some problems due to the design.

  Help, please

  Hello

  It may seem a little weird, but you can repeat the update of the bios? After this, reinstall the latest display drivers available from the toshiba driver download page. Maybe it just s driver related, so you should give it a try...

  And Don t forget to give some feedback if it succeeded.

  See you soon

• Satellite A200-1UM: WLan driver does not work on XP

  Hallo,

  I tried to install some W - Lan driver for my laptop but it doesn´t work. In my device manager is an exclamation point on "11 a/b/g Wireless LAN mini PCI Adaptern II" and on "Audio Device on High Definition Audio Bus" but the sound works.

  I Don t know which wlan driver I need and how to install it.

  Please help me

  Post edited by: tomek1

  It seems that the WLAN from toshiba download page is down and you have to find another way to find the WLAN driver.

  According to the specifications of the laptop, your laptop must have WIRELESS Atheros 802.11ag network card. Googled around and I'm sure that you will find the Windows XP Home edition for her driver.

  By the way: in the lower corner of your laptop, there is a Wi - Fi label. Please report the number of PAxxxx.