Satellite A200-1TJ - no audio device recognized by Vista

Similar Questions

• Satellite A200 - 23K - card SDHC not recognized on Windows 7

  Hello, I have a toshiba satellite A200 - 23K.
  I just installed Windows 7, all drivers support drivers toshiba and all the updates of microsoft windows, including the suport of 32 GB SD flash cards memory.
  http://EU.computers.Toshiba-Europe.com

  But in the Device Manager there is a witch of the element named "mass storage controller" has not been installed (which would be the SD card reader), but I didn't know any driver for "Texas Instruments PCIxx12 Integrated FlashMedia Controller" and installed the VISTA driver instead. Now, the look of the device is fine in Device Manager, but he only read a normal SD card, and when I insert a SDHC 4GB it came to nothing. In windows XP / vista and linux (fedora / ubuntu) there is no problem with SDHC (4GB and 8 GB Kingmax SDHC class 6).

  I would very much apreciate in advance if someone will make a driver for the card reader (I use it pretty mutch for photos).

  Hey Buddy,

  I think the problem is the Vista driver expired that doesn t work 100% correctly on Windows 7

  As much as I know Satellite A300, which supports Windows 7, is also equipped with Texas Instruments card reader, or at least the pilot is also from the same company with respect to the Satellite A200.

  In your case, I would try this driver, I hope it works! :)

• Satellite A200/W00 - fingerprint is not recognized by the software reader

  Hello.

  I'm running a laptop Toshiba Satellite A200/W00 (PSAF6A-0W00IN), and I recently installed my brand new Windows 7 Professional that I just bought.

  I found drivers for Windows 7 for my laptop on site and installed the Protector Suite QL 5.8.0.4024, and very comfortable.

  Once I restart my computer after installing on the connection screen where the button scan fingerprints is connect it says "Cannot read the scanning device", or something in that sense.

  When I connect another pop up with the program on the bar showing the same thing, that my fingerprints, the scanner must be connected tasks. It is built into the laptop, it should not need to "plug".

  I tried to uninstall the drivers for my biometric device, and then on the analysis of the physical changes he immediately detected my fingerprint again reader and reinstalled the drivers of it.

  So my fingerprint reader is clearly working, but Protector Suite QL is not detect it. I don't understand why.

  Someone has discovered this problem or knows how to fix? I can't exactly check the State of my scanner as it is built into my laptop.

  You can use fingerprints (TrueSuite Access Manager) software and all the features it?
  You have registered your fingerprints? Some problems?

  Check the settings from there and be sure connect password option replace Windows with the connection of the fingerprint is enabled.
  In all this history it's really strange that only the windows fingerprint logon cannot correctly detect the device.

  I have a Qosmio x 300 with fingerprints. Have updated Win7 and everything works well. I may simply have more luck then you have. ;)

• Satellite A200 - WLan disappeared in Device Manager

  Hello

  A few days ago my wireless card work properly without any problem.
  Today, I want to connect to a wireless router and I saw that my card is missing.

  I reinstall, I made something possible, but here? m receiving the message - please insert card or something like that.

  The doesnâ card? t appear in the Device Manager it is not locked by FN + f8
  My laptop is a Satellite A200

  Please help me :)

  Try to update the BIOS and reset to the default values.

  If this does not work, you may need to reinstall the wireless card. It could be a bad connection.

• After a custom Windows 7 installed on a Toshiba Satellite P105-S6084, my audio device does not start. Error code: this device cannot start. (Code 10)

  I got driver Conexant speakers on my laptop. I tried to find a device driver updates, but have had no luck. After being in Control Panel, hardware and audio, Device Manager, sound, video and game controllers, under that is high definition Audio Device with a yellow triangle and!.

  After a right click and update driver, it says that the driver is up-to-date. In addition, the error code says this device cannot start (Code 10)

  In addition, this seems to be a driver of Microsoft when the original driver was Toshiba/Conexant. I looked on the support Web site of Toshiba for a driver updated for my laptop and Windows 7.

  Any suggestions?

  Umesh P,.

  Thank you for answering my question. I don't know that this forum allows you to stay busy. Thank you for taking the time to answer my question.

  To sum up, I checked the Windows Audio and Windows Audio EndPoint Builder according to your instructions. Both were running as usual and start automatically, so it wasn't the issue.

  I then visited Fix It. On the web page, since I am under Windows 7, the instructions on the provided web page to access the control panel and through system and security, to try to resolve the problem to fix common computer problems.

  This process led me through the same re-setup of the device through Windows 7 driver that failed previously. Also because it has detected Windows 7, the web page would allow me to run the Fix It program.

  When I visited the Support from Toshiba web page you provided, I was unable to find a sound driver for Windows 7. After filtering through my computer on their web page, the nearest driver was for Vista.

  Take a chance, I downloaded it anyway. What has been the worst that could happen? It does not work? Well, I was there already. In any case, the installation worked and I now the audio again.

  Moreover, this is the link for the driver, for anything that might be in a similar situation I've been:

  driver_audio_conexant_25636A.exe

  -or-

  http://cdgenp01.CSD.Toshiba.com/content/support/downloads/driver_audio_conexant_25636A.exe

  Also, Conexant offers no direct audio driver support and ask you to check with the manufacturer, which in my case is Toshiba. Toshiba not currently has an audio driver Windows 7 for my particular Satellite phone. Since this is an older, they can't come out with an updated driver.

  But, since the audio driver Vista download works, it is now a non-issue.

  Thank you!

  Jay

• Satellite A100 and USB audio device problem

  I bought "toneport ux2 line6" and it does not work with my computer laptop (dual core 1, 73GHz, 1 GB ram, Windows Vista).

  The problem is when I listen to music through this device, it looks I would look scratched CD, from time to time that there is a short interruption. The same thing happens when I'm with gearbox (software that allow you to play the electric guitar using audio device). I checked everything, including change Windows XP OS.

  I have the latest drivers for the port of your (compatible vista), I downloaded 3.5 mechanism, only toneport is connected to my computer, I have disabled all installations flashing in vista, power management is scheduled for high performance. I disable the sound card. I checked my cell phone with line6 monkey and it says everything is ok. I checked the audio device on my friend's Office, and it works well.

  I desperately need help.

  Hello Marcin

  In my opinion, you must be sure your laptop running fine and according to your assignment I do not here no problem.

  So in your case you have problem with some additional equipment or third party software. Am I wrong? If there is a problem I see no reason to seek the solution with Toshiba. You should contact the manufacturers of all the devices and software that you use. They should have enough experience with own products and they should offer good support in troubleshooting.

• Satellite A200 - 1 M 8 - drivers missing for Vista 64-bit

  * Material: *.
  Toshiba Satellite A200 - 1 M 8 (PSAE6E):

  OS: Microsoft® Windows Vista Home Premium
  Version: 6.0.6002 Service Pack 2 build 6002
  Producer of system: TOSHIBA
  System model: Satellite A200
  Type of system: PC x 64
  Processor: Intel (r) Core (TM) 2 Duo CPU T7100 @ 1.80 GHz, 1801 MHz, Cores: 2 logical processors: 2
  BIOS: TOSHIBA V2.60, 2008-08-28
  RAM: 2 GB

  * Problem: *.
  After you install all the necessary drivers (Chipset, Robson, graphic, sound, Lan), I go to Device Manager I see "Other devices" category :-(
  It lists: _ _ "Control of mass storage" and "Untitled Device" _. Any help is appreciated!

  Greetings - Andrew.

  Hey Buddy,

  It is difficult to say that the drivers you still need because Satellite A200 is not Windows 7 64 bit supported. With other words Toshiba doesn't provide all the drivers for this model and Windows 7 64-bit.

  What you can try is using 64-bit Vista drivers. Usually, most of them should work on Windows 7 64 bit.

  Mass storage controller could be the reader of card, but about the device without title I n t have an idea, so you need to check the vendor and device ID.

• Satellite A200 - corrupt 2.40 update BIOS for Vista x 64

  Hello

  I just downloaded new vista x 64 BIOS for my satellite A200 (PSAE3E) and I can't flash. I had to install four warnings before BIOS updated and 0 problems, but in this version of 2.40 vista x 64 when winplash flash new BIOS stop and there is the trace message:

  BIOS update failed, check the image failed. error code 200

  I put t know what happened.
  Where can I see what is this error 200?
  Has anyone installed this new BIOS?

  Do you use the 64-bit version of Vista?

  The mentioned BIOS is only compatible for portable computers with Windows Vista! (64-bit)

• Satellite A200 - 1 M 4 - how downgrade from Vista to XP

  I got my * _Satellite A200-1M4_ * from Vista to XP pro.
  Do I have to downgrade the Bios too and please help me with the necessary drivers for * key to _FN_.

  Thank you

  Hi guys

  I would like to add that the Satellite A200 - 1 M 4 belongs to the * PSAE0E * series.

  This series needs a BIOS update after installing XP.
  The European driver Toshiba page provides a special version of Win XP BIOS.

  In addition, you can find the + Installation Instructions on the page of the driver.

  This document provides the proper installation order which is very important to get all the drivers and tools work properly.

  Best regards

• Satellite A200-28 s becomes black when connection Vista

  I have a Toshiba Satellite A200 - 28 s computer laptop windows vista home edition.
  Recently, when I have the logon screen turns black.

  Thank you

  Hello

  The screen is black only when Vista has been loaded or also when logged in the BIOS too?
  Did you check if you can see something on the external monitor?

  To me, it seems that the video output has been set to external monitor and it's the reason why you n t see anything on the internal screen for laptop.

  Check if you can switch the video output using the FN + F5 key combination

• Satellite A200 - 1 GB: Questions on downgrade from Vista to XP

  Hello.

  I have a Toshiba Satellite A200 - 1 GB and I want to downgrade to XP, but I have a few questions.

  + I install XP using nlite. +

  1. I have 2 partitions and I would like to know if my other partition (not the one with the operating system) will be also well formatted?

  2. I have Vista Bios. Should I change it to XP? And if so when do I need to do.

  Thank you!!!

  Hello

  The original CD of Microsoft Windows XP provides an option to modify, create or delete partitions on the HARD disk.
  If during the XP installation procedure, you should be able to install XP on a single partition. Other partitions will not be formatted!

  With regard to the BIOS:
  You could update the BIOS after installing XP.
  The laptop must run also without the update of the BIOS.

  But from my knowledge the FN keys would work using the operating system XP and Vista BIOS. So if you need to use all the features of the laptop, the BIOS update would be desirable.

  See you soon

• Satellite A200 remote control does not work with Vista Ultimate

  Anyone know what I have to work for my TOSHIBA (Media Center) remote?

  I had Vista Ultimate installed on my Satellite A200 (PSAE6).

  Remote has worked on software pre-installed that carried out with (he was Deutsch).

  I almost tried everything, all the drivers are installed, I searched on the site of Toshiba drivers and nothing.

  Help, please.

  To my knowledge the Enbeded IR V0.0.0.6C was installed in the factory Toshiba Vista image. This looks like an application needed to run this command remotely.

  Unfortunately, the application looks like a part of the image of Toshiba and was published by download

  by the way; A200-xxx unit you have exactly?

• Satellite A200-1d(a): various problems with Windows Vista Mail

  Model: Satellite A200-1d(a)
  O/s: Windows Vista editions Home Premium more
  Background: Recommended for a parent, now transformed into 'support harassment ".

  The behavior of Windows Mail is displayed is non-standard and unreliable, for example:

  Creating new folders local they are initially displayed in the list of folders (left sidebar), if the mail is restarted they disappear and reappear only if they are selected after clicking on "local folders". Other than the Inbox, local folders and the Microsoft? (used for notes, etc.), all the other default folders are missing, either sent, sent, drafts box, etc.

  Another minor issue is that windows mail does not seem to recognize when the status of the internet connection changes from unavailable to available, in order to empty the Outbox and send emails, it is necessary to restart windows Messaging.

  A number of occasions, all messages disappear from your Inbox and all other folders are not available, the only solution to this problem seems to be a reboot of the laptop.

  This link seems to suggest that there is a problem with the security software which is now Norton Internet Security (configured and bundled with the laptop):
  http://forums.techguy.org/all-other-software/551829-Windows-Mail-doesn ' t-display - messages.html

  I tried to disable email inbound/outbound scanning in Norton, but it made no difference.
  Next step is to apply:

  http://support.toshiba-tro.de/KB0/TSB7701X30005R01.htm

  and then remove Norton Internet security

  Any ideas?
  Other than the foregoing the laptop is fine, looks like a problem of s/w for me.

  concerning

  Ball

  Hello

  I can't provide an exactly the solution to this problem of Vista Mail but to me, it looks like a Microsoft Vista operating system problem and not Toshiba Satellite.
  I don t think there could be a problem with the hardware that's why we should look for solutions.

  Now you will ask where a software solution? In my opinion, you should check the knowledge base Microsoft for some useful tips.
  http://support.Microsoft.com/search/
  and the solution center in Windows Vista
  http://support.Microsoft.com/windowsvista

  But first make sure that your Vista operating system is up-to-date and you have already installed all the updates and patches!

  Good bye

• Satellite A200-1BP: need to display driver for Vista

  Hi guys!

  I have a satellite A200-1BP... that one must download a±? A± did not understand these = PSEAC, PSEA0...

  So I installed one of them for vista... for geforce go7300.but my display driver has not changed... it still didn't give me that a± want a good perormans... A± couldn't play NFS carbon: (...) How can a± install my display driver for vista? help me... Please explain correctly and in detail

  Thanks for your answers rigth now...

  Hello

  Additional numbers describes the series of laptop! There are different A200 series!
  At the bottom of the unit, you will find the integer and you need only the first characters and numbers 5.

  Please choose the right Satellite A200 series and download the graphics driver on the right!

  But the way in which; I don't know if the game performance will improve after the installation of the new graphics driver I've read somewhere that Vista needs a lot more material performance and that's why some games don t m runs smoothly.

  In such cases, it s advisable to run and play games on Win XP operating system!

• Re: Satellite A200-1Mes: XP audio driver does not work

  Hello
  I have a problem with my audio driver (I use windows XP). I installed all the drivers xp and still does not work.
  Can someone tell me where to find a driver?
  Thank you.

  I hope that you are using Windows XP SP2 home edition. Anyway check it please this thread. Try using the instruction given by Eldorado.