Satellite A200 stops automatically

Similar Questions

• Satellite A200 cease automatically charge the battery?

  I'm really tierd of pepole telling me I have to unpluge the charger after the battery full coz to come if I still taken in the charger, the battery will be lost after all the time.

  I need the Expert pepole here to tell me is the Toshiba Satellite A200 is automatically stop charrging battery after it come complete or should I unplug the charger to save the dough?

  I hope that I have the answer to this question

  Thank you
  wait for your reply

  I m not an expert but I have 2 laptops.
  In two books, the battery while AC is plugged.
  I think the latest battery technology allows to use the battery and the power adapter at the same time and it affects doesn t the battery strong performance.

  But my 9 years into the first computer battery laptop doesn't work anymore. He died after about 2 years of use. Now, it lasts for about 1 min, then it s empty.
  But the battery is old and it is nothing unusual.

  Your battery is going to die also sooner or later, but in my s TI doesn't matter if the battery is inserted and that the AC adapter is plugged in or not.

• Satellite A200 - stop the CPU cooling fan

  Hello

  I got a Satellite A200-1CK and stop my CPU cooling fan. Not that my CPU is not getting enough cooling. But when I use my laptop to school for use for OS virtualization, it heats up, and the cooler will not turn.

  The CPU cooler is broken or is it just a setting in the bios?

  Greetz,
  Dion

  Hello

  You must understand that nobody does you any kind of diagnostic accuracy and if you want to have the correct answer, your laptop must be checked by a technician.

  Please check the BIOS settings, but on my A200 I can t see anything that can help.

• Satellite A200 stops randomly - I may have a solution

  Hello

  I have a Toshiba satellite A200-1sj, but the laptop have problems and it shuts it self randomly.
  I changed the thermal paste from the GPU and CPU, and this is unrelated to the heat because it sometimes could turn off even after the first start when it is cold. I started the case from the jury, just naked naked with the cooling pipes on it and it would stop once again, without its hard, wifi or modem adapter so it is not related to them. I also tested with another charger to power supply an A200 - 23 k friends and she always stops if it is not in this topic or the other.

  BUT! The big but is what I discovered and I think toshiba is to blame! This problem is related to the voltage regulator way and it does not work properly because some add reason. I also found a sort of solution last night after a bios save and exit the fan stuck at 100% and the machine have not stopped since then and it looks like when the fan is regulated and it rises and lowers the tensions while the problem appears.

  The saddest is that I left the low-profile bios cpu, so it runs at only 1 GHz and I fear of change in the bios because I can lose the fan of 100% and the machine will get unstable yet! :(.

  Current BIOS I have is 2.60 and I think try 5.30 if the machine starts to close again, but I think that it would not go because the fan is going to regulate again. (.

  Y at - it someone from Toshiba which can create a bios with a constant voltage to the fan, so not vertically, there is time which could be less painful for the regulator I guess and can bring stability to the decent sound.

  I am open to any suggestion,

  Best regards

  Thanks for your interesting Agile ad.
  Problem is that this forum is a user forum and if you want to discuss this with Toshiba, you must contact the nearest authorized service provider.

  They have maintenance manuals, all the necessary technical data and also sufficient experience with that, so I think that Toshiba technicians are right people to discuss the issue described.

• Satellite A200 - stop randomly

  Hello

  My laptop Toshiba Satellite A200 will stop randomly. First I thought, that the CPU is overheating, but its temperature is 50 degrees (Celsius), and it is good (I also change the fan). But my ATI radeon HD2600 graphics card has 50 degrees too and that's a too high temperature for nothing to do.

  Where could be the problem? What is the temperature of my gpu of closing?

  Thank you

  Sometimes when I turn on my computer, the temperature of the GPU is only 30 degrees
  I have a dualboot XP and Windows 7. When I turn on XP, the computer shuts down when booting, when I turn on Windows 7, it's not stop immediately

  Hey,.

  > First I thought, that the CPU is overheating, but his temperature is 50 degrees (Celsius)
  How to measure the temperature?
  As much as I know there is no formal program of Toshiba to check the temperature, and the 3rd party tools can show wrong temperatures.

  > But my ATI radeon HD2600 graphics card has 50 degrees too and that's a too high temperature for nothing to do.
  Who said that 50 ° C is too high for the GPU? In my opinion it s normal and ok, it won't be a problem.

  In your case, I would follow the instructsions here:
  [How to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]

  Theoretically it could also be possible that the thermal grease is too old and should be replaced. This can be done from an authorized service provider.

• Satellite M100 stops automatically after about 10 min

  Hey there guys :)

  My Toshiba laptop has been powered off abrubptly and lit, it's own lately.

  When I turn on my computer laptop, everything appears fine, if fully charged battery, AC adapter / CC plugged in etc. However, after about 10 minutes of use, it will be just turn off and make some noise "zoip" or similar. Turn the laptop back on right after work, but I find it only remains on for 4 minutes before doing the same thing. Turn again reduces the time it stays on, sometimes not even go beyond the boot sequence.

  However, if I leave it alone for a few hours and come back, he's going to stay for about 10 minutes again, before going through the same process.

  I have a warranty, but I am hesitant to take my laptop because I don't want to lose my files.

  So I hope that someone here has a solution for my problem :)

  Thank you
  Osman

  Hello

  Sorry to say, but I think it s a hardware problem. This portable strange behavior seems to be a simple overheating!
  The laptop supports thermal protection to prevent the equipment from damage.
  If the temperature rises to a higher level, that the laptop stops automatically. It is a fact and nothing unusual in this case.

  Especially the fan cleaning helps but sometimes the laptop must be open for a professional cleaning. But beware: I n t recommend opening or removing the case! You lose the warranty!
  Maybe an aspiration would make it.

  Anyway, you said that you will not lose the data on your HARD drive. Well, I wonder why you n t create a backup of data, you can also remove the HARD drive and connect it via external USB controller on the second PC and can save the files to the other HARD drive.
  After this procedure, you must put the HARD drive in the laptop and try to reinstall the operating system.
  If this does not help, I would recommend taking the guarantee.

• Satellite A60 stops automatically after about 1/2 - 1 hour of use

  Hello

  My PC automatically stops after about 1/2-1 hours of operation.

  Can you help me?
  Thank you.

  Hello

  Sounds like overheating
  Have you noticed a higher temperature?
  High temperature may affect the pieces of equipment like the CPU, RAM, GPU

  What do you think of this?

  The A60 is a little old, and I think that there could be dust inside checking the fans If you can remove the dust using a jet of compressed air.
  This should help to decrease the temperature.

• Satellite A200 stops after the post

  Hello.

  I replaced the motherboard that was dead with a used one on ebay, the user declares that it functioned very well.

  Anyway after that I set up everything, it starts for a few seconds and then stops.
  Then I tried connecting the Council, except in the case of the laptop and it's the shutsdown, after awhile, except in certain positions, or if I press somewhere, then he has not stopped.

  I have reviewed everything carefully and I don't see any evidence of anything whatsoever that could short the motherboard...
  I took a few pictures for you to see how I managed to do work for a long time:

  http://I54.Tinypic.com/ojnix5.jpg
  http://i51.Tinypic.com/2upekw8.jpg

  He got up on the upper right. If I normally put it will not work.
  The strangest thing is that if I go into the BIOS by pressing F2, he used stop! forever there remains, after the POST, that is the case...

  But if meet the thing and tighten all bolts, even its worse, shutsdown in 1 or 2 seconds and doesn't show any video...

  What do you think is?

  Hello

  I think that it of almost impossible to say what could be bad exactly.
  If the MESSAGE cannot be passed correctly, it means that something is broken on the motherboard.
  Have you checked RAM?

  Faulty or incompatible RAM can cause this problem but it s just a suggestion

  PS: what about CPU? Is it compatible with the new card mother and chipset?

• Built in web cam stopped working - Satellite A200

  The webcam integrated on my Satellite A200 stopped working yesterday and I don t know why. I have not recently installed new software, but it is not recognized when I use Skype or any other program. When you try to use the camera, an error says no camera is recognized or it's off.

  I uninstalled the driver and reinstalled several times but it didn't help.
  Please, does anyone have any ideas? (Vista OS).

  Hello

  Sorry, but it is not easy to say what the problem is here. I recommend you to roll back OS to an earlier time using System Restore tool. I'm sure that you'll be able to reuse cam.

  I cam on P200 and use it with Skype without any problem. I really hopr you will be able to solve this problem.

  Good luck!

• Stop Vista automatically on the Satellite A200-14F (PSAECE)

  System stops - but re - start automatically. Have updated the BIOS, but still no luck. Have tried all the settings on Vista power options.

  For me, it looks a bit like a problem of overheating or a problem of Vista system.

  Let's talk about overheating;

  Usually the laptop stops automatically if the temperature reaches a critical threshold. Then the notebooks overheat protection stops the laptop to prevent material damage.
  Especially, the temperature rises to a higher level because notebooks modules of cooling don't work properly.
  You can try to clean the fans with a professional pneumatic sprayer.
  It s a really useful tool for blowing air even if the railings of cooling and get rid of the dust and debris. These sprays, you can buy a portable computer/computer dealer.

  But this problem could be related to a software problem;
  In this case, I would recommend reinstallation of the operating system with the Toshiba Recovery CD.

  Best regards

• "TosBtMng has stopped working" on my Satellite A200/H01

  I have a Satellite A200/H01 with Vista Home Premium 32 bit.
  A few days ago I started up this message at startup: "TosBtMng has stopped working" I have updated all the BT device drivers in Device Manager, but it did not help. I then installed the battery BlueTooth (v64000T_20090324_x32.exe), and this did not help, either. In fact, the error "TosBtMng has stopped working" message kept coming upward on several occasions, even when I tried to shut it down.

  Could someone help me please?
  I use BT to sync with my mobile phone (Nokia 6120 Classic) via PC Suite from Nokia 7.1.30.8 worm. I was using the computer BT without problem for 18 months now, until last week.
  Thank you very much. Andrew

  Try the new Bluetooth stack v6.40.02

• Satellite A200 suddenly stops showing anything on display

  Hello
  I have been using Satellite A200 for 2 years and it works very well. Recently, I have problems.
  When I use it all of a sudden it stops to show anything on the display but the power to the front lights are still on.

  This problem occurs often. If the motherboard is fried or there is overheating. I gave my laptop for repairs and they said that they had repaired the system board and cleaned the fan.
  But the problem still occurred. If anyone can help me I will be very grateful.

  If the service cannot help I don't know what kind of help you wait here.
  That's the big difference to discuss on a topic if you have laptops in front of you, or on this way where we can only imagine what the problem may be.

  It's really not easy to say why this happens, but there may be a problem with the display cable.
  This happens to you while you work or after display goes OFF mode (set in the power settings)?

• Satellite A200 - 23K - Excel and Word has stopped working

  Hello!

  I have a problem on my Toshiba Satellite A200 - 23 k. I installed windows 7 and office 2010. I have a problem whenever I try to run excel or word it stop working. It shows who has stopped working the window.

  Maybe someone had the same problem and knows a solution? Thank you in advance. Waiting for answer

  Hey Buddy,

  As far as I know Office 2010 isn't on the market yet and he s only available beta version.

  You must choose an official version of the office such as Office 2007 or 2003. Both versions work well and most of the problems he's already resolved.

• Toshiba TEMPRO stopped on the Satellite A200

  Hello

  I installed Tempro V1.2 on a satellite A200. TEMPRO tell me I have 12 alerts but when I click the description of the alert,
  I have french a witch of error message telling me that stopped tempro: ' (Tempro a cess to operate).»

  You have an idea to solve this problem?

  Kind regards.

  Maybe you should remove the Tempro software first and then recommended to clean the operating system using the CCleaner and then you must install the new Tempro software on your system.

  But just a tip: the Tempro only sends you a message if a new driver or tool has been transferred to the page of the Toshiba driver.
  In my opinion it of not really necessary, it always runs in the use of historical material and needs OS I had this tool, but I took it off the bone.

  Welcome them

• Satellite A200 - Touchpad scroll function stop working after BIOS update

  Hello

  After that I updated the BIOS (drawn from the Toshiba site), the scroll function stop working. I can still click, move the mouse pointer, but can no longer navigate the touchpad. Relocation of Synaptics driver is not the problem. The strange thing is that the computer detects only my touchpad as standard pointing device (port: PS/2) device. "Graph of pressure" and "Moodpad" function also stop working and complain "this program requires a Synaptics TouchPad, and the Synaptics Pointing device driver.
  My computer is Satellite A200 PSAE0C-TR605C.

  Anyone know the reason?
  Thank you

  Danny

  Hello

  What operating system is installled and which is more interesting: what version of BIOS you have installed? Why I ask? Because there are 2 different BIOS versions, one for Vista (1.80) and one for XP (5.20) which means that when you Flash a BIOS XP on a computer with Vista installed then some functions do not work properly as the FN keys or the touchpad.

  If please check this out and make sure you have the appropriate BIOS installed.

  Welcome them