Built in web cam stopped working - Satellite A200

Similar Questions

• Satellite L300 - 2CL - built in mic has stopped working

  Hello

  When I bought this computer (sep-09) everything worked fine. Then in March (I hade it idle for some time), my built in mic has stopped working.

  What eles is fina, and I scanned the Web for solutions and tried to install the new drivers, unistall them, all possible boots, disabel and restart, but at most I just get a static sound of my recordings of test.

  I use win 7 home pre, but the problems started when I was with Vista. Now, I am of ideas, and my friends on Skype develops enough not to hear me.

  Is that what I can do to get the microphone working, or should I buy a headset?

  Grateful for help
  Hugo

  Hi mate

  To be honest, I would use a helmet because helmet still provides a better speak of quality.

  But the internal MIC is part of the webcam and the microphone is controlled by the software of webcam too.
  Please launch the webcam software and go to settings.
  Then, choose Audio tab.
  Here, you must increase the volume to maximum.

  Welcome them

• VAIO Motion Eye Camera stop working

  Laptop: VGN-SR190E
  Problem: USB Motion Eye Camera stop working
  OS: Vista Edition Home Premium

  The Sony Visual Communication Camera died in this laptop. I want to talk about the "Motion Eye" webcam above the screen.

  In the Arcsoft window, frame (window of the camera) went black, screen resolution went to 176 x 144 (QCIF), whatever that means.
  In addition, no image using Windows Live Messenger.

  Worked very well (image capture), then quit. Removed and reinstalled the drivers. No help. In the properties of the device, he says: "this device works correctly. Well maybe, but no picture.

  What else can I do to fix this?

  I can't stand Vista another day. I ordered Windows 7. I hope that its an improvement. Could install Windows 7 remedy? I guess I'll find out.

  Any ideas would be appreciated.

  Thank you
  Phil

  Update: not working yet.

  Error message in Arcsoft WebCam Companion:
  'Webcam not found or does not work properly. Please click the Connect button and try again.

  Previous post:
  No help from this Forum, but I got the Motion Eye Cam working again. He would sometimes work for a minute or two and then quit. I thought it would be connected USB so I downloaded the registry USB patch (and a whole bunch of other updates and more) and installed it. After the patch USB Webcam has started working again. I don't know if it was the fix, but its working now. The Vaio "Updater" program did not work (it should be updated as well) so I had no idea there were so much software upgrades available for this laptop. I highly suggest that you check the Sony Web site for downloads (if you did not) available for your computer. Good luck.

• Microsoft Expression Web 4 stopped working: _

  Microsoft Expression Web 4 stopped working:

  I installed my new Microsoft Expressions Studio 4 Web Professional on my new computer and when I try to open the program of 4 of Microsoft Expression web, it does not open.  Instead, I get a message box that says:

  Microsoft Expression 4 stopped working: a problem caused blocking the program works correctly.  The window close the program and notify you if a solution is available.

  How can I fix it?

  I don't use this program myself, was he asking for a version of the .net Framework, sometimes make programs, or maybe it was something like Microsoft Visual C++ Redistributable Package, we can only guess?

  If you look in programs and features, and left click on Microsoft Expression Web 4 is a 'Change' option (not uninstall), if there is an "Edit" option, and if you select it, it could allow you to add missing additional components, or it my offer you a repair option.

  If you want you can always uninstall and then reinstall it correctly.

• I can't get my web cam to work. I have a top hp touchsmart desktop pc

  I haven't used my web cam because I had my pc. I have a HP TouchSmart 310-1126

  Desktop PC. The web cam worked the day that I got the computer and I tried to use it recently and not couldn't get it lights up.

  I have a HP TouchSmart 310-1126
  Desktop PC and can not get my web cam to work. He worked the day I
  has received and has not worked since.

• Satellite L300 - Built In webcam suddenly stopped working

  Hello

  I have a Toshiba Satellite L300 with a built-in USB 2.0 camera and a windows operating system 7, the camera suddenly stopped working for about 2-3 weeks ago with unknown reason!

  I tried the system restore, uninstall and reinstall the camera driver, preformed a complete analysis by kaspersky internet antivirus 2012 (updated) and I also ran a complete system and drivers troubleshooting... and the problem persists...

  When I use windows live movie maker it gives me an error saying: can t record audio or video of the selected camera. Make sure that the device you are trying to use is properly installed and not currently in use by another program.

  The microphone works well on Skype, but the camera does not open!
  Please tell me how to solve this problem, what missing am me?

  > I tried the system restore

  You got the device using the Toshiba Recovery disk?
  In this case the cam should work

  Otherwise I would say that this unwanted material s.

  Some users here in the forum have reported a webcam problem and the reason for this was a loser between the cam module and the motherboard connection.
  The webcam is connected to a USB controller on the motherboard.
  If the connection does not exist, the webcam does not appear in the Device Manager it does not appear in your case? Check this box

• built in web cam does not work

  Right so my built in camera is not working, I have an advent modena m101.

  When I press fn + f7 is no function but the sign of web camera is always says the roundabout turns even now. I tried the update that it didn't work. any help will be good

  Hello

  Sound like there may be hardware problems so check with a real computer store
  (the advent of services internal) or the Support of Advent (see links below).

  Troubleshoot camera connection
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

  You probably need to reload the drivers of the device and any camera (general control software
  included with the drivers and installed at the same time).

  Login as an administrator.

  Control Panel - Device Manager - Imaging - write down of the brand and the model of camera - double
  Click on it and on the tab of the driver is version. Now, click on update drivers (who cannot do anything
  that MS is far behind the drivers of certification). The RIGHT CLICK on the camera - UNINSTALL
  -REBOOT - it will refresh the driver stack.

  Now, go to the system manufacturer's website and download the latest driver of the camera and other partners
  the camera software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each
  pilot.

  Manually look at the sites of the manufacturer for drivers.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Then let windows updates on however prevent loading of drivers that are often
  older than those that you have installed. If updates suggests a pilot can HIDE and watch
  manually to see if their really is a more recent version (both system and the manufacturer of the device manufacturer
  sites).

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ----------------------------------------------------------------------------

  Check with the advent of support, their online documentation and drivers (update or reinstall),
  and their forums.

  Advent Computers - computer science daily
  http://www.adventcomputers.co.UK/everyday-computing

  Advent computers - support (Note: there are 2 pages)
  http://www.adventcomputers.co.UK/product-support

  Support of the unofficial advent - Forums
  http://www.adventsupport.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Built in mic has stopped working on my Satellite Pro T130

  Dear Forum,

  the microphone of my Satellite Pro T130 15F stopped working a couple of days at a time.

  It captures the white noise.
  But he responds only to knock on the place where it is located next to the built-in webcam. It does not pick up normal voice or cry out to him...

  Can't bring any changes to the software that could influence.

  What I've done so far: deleted drivers, installed new, updated all Toshiba Software and downloaded and run all the stuff suggested to this problem.
  And of course, it is not set to mute or upgraded to the bottom.

  Still no cure.
  What's next?

  Thanks much adavance.

  Hmmm, it makes a static noise? Kinda sounds like hardware related issue
  But check the microphone settings in the control panel-> sound-> recording tab
  Here, you should see two entries; internal microphone and external microphone port.
  The internal microphone must be turned on!

  In addition, the internal mic belongs to the webcam. In the assistant webcam-> settings-> audio tab, you can increase the maximum microphone volume.
  Check this box

• Satellite A350-20s - built-in microphone has stopped working

  Hello

  I was wondering if someone could help me? My mic has suddenly stopped working. I was away for two weeks and when I tried to use the microphone it no longer works. It was working perfectly before.

  When I go into Control Panel and watch settings for the microphone, he said his assets. I also installed the volume on the microphone and checked if everything is muted. But as far as I could see everything fine.

  If I test the microphone the sound bar still gray and the microphone is not any sound recording. I tried a few of the instructions I found online, but nothing helped.
  I mainly use the microphone on web with Skype calls.

  It is a very frustrating problem. I hope someone can help me. Thanks in advance.

  Hello

  The built-in microphone is the webcam and is a part of it. Which means it would be recommended to reinstall the driver for the webcam. You can download the driver for the webcam on Toshiba website for your laptop.

  Can send you additional information about your operating system? You use the preinstalled operating system from Toshiba or did you do your own installation of Windows?

• my built in web cam does not work, why. I had working for minute, but moved to the screen and he went

  my web cam isn.t work. When I turn on it says make sure it is turned on. How do I do that? Once when I clickrd on the icon, it came on but exploded when I moved to the screen. Now, I can't get it working again.

  Thanks for the help

  Hello

  
  1. What is the brand and model of the computer?
  2. you receive an error message or error code?
  
  Try the following and see if it helps.
  
  Method 1:
  
  Run the hardware troubleshooting tool.

  Open the hardware and devices Troubleshooter: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

  Method 2:
  Step 1:
  Check if the webcam driver is listed in Device Manager
  Step 2:
  
  Try to disable the webcam and then turn it on and check if it helps.
  a. open the Device Manager.
  b. click on imaging devices.
  c. right-click on the Webcam device.
  d. Select Disable.
  Note: Try the steps up to the c and select on to activate the webcam.
  Method 3:
  
  I suggest you install the latest updates for Webcam and check if it helps.
  
  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly
  
  Note: If you still have the problem then I suggest to uninstall and reinstall the webcam software and check if it helps.
  
  Uninstall or change a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program

• Built-in Web camera

  I have an Asus laptop built in webcam. Normally, when I turn it on it has Visual recognition on it and today, instead of coming up like my cam being just about that came as a red circle with a line through it. Now me web cam does not work for MSN or Lifeframe, it won't work at all.
  My computer has also the identification of fingerprints and which does not either. Any thoughts?

  Hello

  Login as an administrator.

  These two are USB devices.

  Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices

  Look everywhere EXCEPT USB controllers for your devices and if find you them (maybe more)
  one of each)-RIGHT CLICK and UNINSTALL for all instances. For camera and device of FP.

  Now, moving to - right click - USB controllers UNINSTALL everything in category one at time EXCEPT the
  Category itself - REBOOT. This will refresh the USB driver stack.

  Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as all
  USB devices that you previously used. Run Options and check the 1st three choices to see if one is there.
  You can remove all instances of the drive and restart again.
  http://www.NirSoft.NET/utils/usb_devices_view.html

  also if necessary later:

  You should probably charge the device drivers and any software control of camera and even for the public Service.

  Login as an administrator.

  Control Panel - Device Manager - Imaging - write down of the brand and the model of camera-
  Do the same for the device of the fingerprints.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same). Repeat for FP device.

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  ----------------------------------------------

  This can be useful to determine if the wrong driver is loading.

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For each driver
  in the list, additional useful information is displayed: load address of the driver, description, version, product name,.
  company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  -----------------------------------------------

  If no joy, check with the support of ASUS and perhaps a real store of the computer (not BestBuy or other BigBox stores).

  Hope that helps.
  Rob - bicycle - Mark Twain said it is good.

• Impossible to reinstall acer built in web cam eye program. uninstalled by mistake. is not in the Recycle Bin.

  I uninstalled the program acer eye crystal clear web cam to my computer acer laptop. It is not in the Recycle Bin and try to restore to a few days of seems not work! How can I re install the web cam eye? It was built in! I will assume that my skyp won't work now? Im a little new to this kind of problem. Y at - it a web address that I go to install the program? It's beaten!

  You should be able to find the support from Acer for this model of laptop Web site. Often manufacturers will have utilities such as they bundle with their computers freely available for download on their site.

• HP Pavilion AIO: Camera stopped working for windows welcome

  The new AIO Pavilion came back with Windows 10 months and I used facial recognition to open a session.  All fine until 1 week ago, when the home screen says now "preparing...". "and"can't turn to the camera. Use the PIn to connect.

  If I go into RealSense, the camera works very well.  Windows settings for the camera are all lit, so nothing seems to have changed.

  What is a recent update of Windows 10 which changed the signal to the camera?  If so, how I restire it?

  Hi there @DavidG6,

  That the Forums are with you!  I understand that your web camera does not work properly for connection purposes.  I'm happy to help you with this.

  Assuming that it could be a recent update of Windows 10 which is the culprit, you can try using a computers HP - use Microsoft System Restore (Windows, 10, 8) to return to the level of before the problem appeared and see if it works now.  If so, then it is likely a change in software to your system.  Once you have determined that, then you can check: How to prevent Windows 10 to automatically download updated -howtogeek.com, prevent this set of updates.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Touch pad stopped working Satellite Pro R850-143

  I have a satellite pro R850-143 and be back on these forums, I need help!

  My touchpad has stopped working and I cannot use the mouse if I attach a USB

  Everyone could speak more, or I'm leaving I better return just to Toshiba (it is only 3 months old and still under warranty)

  Hello

  Are you sure that the touchpad has not been accidentally disabled by pressing a combination of keys?
  Usually the touchpad can be activated a disabled using Fn + F9
  Have you tried that?

  If this isn't it!

• WLAN stopped working - Satellite X 200/N00, Vista Ultimate 32-bit (SP1)

  When I bought this laptop earlier this year, everything worked fine without any significant problems. A few weeks ago but my WLAN connection has stopped working - more specifically, it does not get a valid IP address of the router.

  Laptop is a Satellite X 200/N00 (PSPBUA). OS is Vista 32 - bit Ultimate edition (SP1).

  It was working fine until the point where it stopped working. The router itself still works fine - I used the connection with a completely different laptop wireless since having the problem on the Toshiba.

  This seems to be a fairly common problem of Vista, but so far all that I tried did not get me anywhere.

  The router is a D-Link DSL-G604T. I've updated to the latest version of the firmware, but it made no difference.

  In Vista, I have disabled IP v6.

  I installed the latest version of the Intel (v12.1.2.1) wireless driver. Material passes all tests, the only thing that fails is to get the IP address.

  I don't know why the wireless connection just stopped working - better that I myself can remember, I had not installed any new software or updates just before stopping work. It doesn't seem to be a hardware failure.

  One thing I've yet done, is test the connection with a completely different wireless router (for example, to a public access point).
  It may be interesting, but I have not really useful, since I need to make it work with the router!

  Any thoughts?

  Hello

  There are several reasons why the IP address cannot be obtained.
  In the first case, you should check if your firewall is disabled or doesn t prevent IP address of reception.
  Second, you should check if the TCP/IP protocol is set to automatic
  You can find these settings in the properties of TCP\IP Protocol.

  Last but not least, I would recommend disable all security settings on the router and tries to establish a WLan connection.
  Please check if the Mac address filtering has been disabled, disable WLan encryption and check if the right SSID is being used.

  If it will be possible to establish the WiFi connection you could activate step by step single WLan security on the router settings.

  Good bye