Satellite A210-18s - can I use the memory modules?

Similar Questions

• Re: Satellite X 200-can I use the 800 mhz memory modules?

  Hello.

  I have a X 200 with 2024 MB of ram.
  I want to spend to 4048 MB ram.

  Is it possible to buy memory ddr2 667 or 800 mhz can I use?
  I think that my motherboard is as follows:
  Intel PM965 Express chipset.

  If its so I can only use ddr2 667 mhz, can I then use any mark at all, or is it special that toshiba recommends?

  You should be able to use the 800 Mhz modules, because the FSB supports 800 Mhz also.

  Greetings

• Satellite M100: How can I use the S-VHS output

  Hello
  I have a Satellite M100. A second screen display will be only activated if I already plugged an external display to the VGA output.
  What I want is to allow my second screen so I can use my cable S-VHS on the TV.
  I wonder that my problem is caused by the Mobile Intel 945 GM video card?

  It's my third Toshiba and I never had this kind of problem before.
  So if my problem how do I use my S-VHS output?

  Thanks in advance
  M.

  Hello

  I guess you want to use the TV and not a second external monitor.
  You can connect the TV to the s-video port.
  Then, you pass the output device by using the FN + F5 key combination.
  Here you have to choose the TV and not the external display.

• Satellite M40X-112: can I use the 160 GB HARD drive

  I have a Satellite M40X-112 lapptop and I want to upgrade my 80 GB to 160 GB internal drive.
  How is know possible? (Toshiba hotline cannot give me an answer only that a 80 GB drive has been tried with these lapptop!). Anyone have experience with that?

  I read several statements here in the forum about HDD upgrade on the M40X and it seems that there is a limitation in the BIOS.
  The BISO will not recognize the 160 GB HARD drive and that is why you will be not possible to install an OS or you will not be able to boot from this device.

  Please use the "advanced search" from this forum to find discussions on upgrading the HARD drive.

• Satellite Pro L300 - can I use the E partition space for other files

  the partition E drive HARD drive on my laptop is only 20% used.
  Can I use free space for storage of things like photos?

  Sure why not?
  You can do that I recommend to create a new folder called images and there you can store your files

  Welcome them

• Satellite Pro L300 - can I use the recovery disc back Vista?

  On my computer I am dual boot Windows 7 and Windows Vista.
  Could get rid of Vista and then later could use the recoevery drive to recover vista?

  PS I know it erases the entire hard drive

  Hello

  Of course, you can use the Toshiba Recovery disk to go back to Vista. It contains a picture of the factory settings and this means that the Vista preinstalled with all the drivers and tools.

  But note that the recovery disc erase the drive HARD integer for you should backup your data first before using the recovery disk.

  Good bye

• Satellite L300-1BW - can I use the recovery DVDs?

  is it possible to use the recovery DVD on my laptop TOSHIBA L300-1BW without any recovery / hidden data on my HARD drive?

  As I want to update my player running more space

  Hello!

  I don't know if I understand your question right, but you can use the recovery disk for your laptop on every time Mr. He s not depending on the partition or HARD drive.

  For example, when you replace the HARD drive, you can install the laptop using the recovery disk.

  I hope I could help a bit.

  Good bye

• Satellite U200 - where can I find the memory expansion slot?

  I want to expand the memory of my U200 but do not know where the expansion slots. Nothing in user manual help.
  Not really want to disassemble the thing if I didn't need to.
  Any ideas?

  Have you checked the manuals s user, including 157 page document?

• Re: Satellite Pro 6100: can I use RAM PC3200 modules

  Hello

  I looked on the specification for this laptop and it does not have to go on 1gig, on the site of crucial, it says to use pc2700,

  But the laptop would always fully work with PC3200 (400 MHz) in it?

  Also the laptop actually supported on 1gig?

  Thank you

  As much as I know the Satellite Pro 6100 supports a FSB 400 MHz.
  So, theoretically, you can use the modules supporting 400 Mhz too.

  It is important that you use the modules DDR SODIMM 200 pin.
  The Mhz may be different.

• Satellite P200D-12f - can I use the 800 Mhz RAM memory modules?

  Hello!

  I have a satellite p200d-12f pspbqe model laptop.
  It has RAM 2 x 1 gb 667 mhz in it.
  So the qustion is: can I put 800 mhz RAM in my laptop? My motherboard supports 800 mhz ram?

  Thank you!

  GLIST

  Hi mate

  The speed of RAM depends on the chipset FSB!
  If the chipset would support 800 Mhz module RAM would you also with 800 Mhz.

  But if the chipset does not support FSB 800 Mhz then you RAM modules would be locked at the speed that is supported by FSB

  So you can use 800 Mhz but this makes no sense if the FSB is slower.

  You check the chipset properties!

• Satellite A100-233: can I use the WiFi for the Peer to Peer network?

  Hello
  Me & my friend have Satellite A100-233, we cannot have network even see ourselves at the TOP unless we are in place contain the wireless Internet Modem.
  If we cannot make network peer-to-peer between us using WiFi?

  I hope you can help!
  Thank you

  Hello

  I don't know if I understand your question, but you want to connect two laptops via the WLan. Am I wrong?
  Well, this type of network connection is called Ad hoc.

  Choose Start-> settings-> network connections, and then click the local network connection you want to share. On the left side of the screen under the management of the network, click on "change settings of this connection. Under the Advanced tab, under Internet connection sharing, check the box "allow other users of the network to connect through this computer's Internet connection".
  There is also a check box to allow other users to enable or disable the Internet connection, if you are so inclined. If your network doesn? t need to access to the Internet, you can skip this paragraph.

  The host system must also be configured with an Ad Hoc network connection and a Set Service identify (SSID). Right-click on the wireless icon in the system tray and choose "view wireless networks". Do NOT yet connect to any wireless network that could appear in the box. Click the Advanced button. This will bring up the Properties window of wireless with the wireless networks tab at the front. Click the Advanced Options button at the bottom right of this tab, select the option "networks from computer to computer (ad hoc) only". Make sure that the box "Auto connects to the non preferred networks" is NOT checked. Click the close (once) button to return to the wireless network tab.
  Under preferred network, click Add. You now need a SSID for this machine, which is actually the name it will use to announce themselves to the other members of the ad hoc wireless network.

• Satellite A210-129: can I send the full HD signal on TV?

  Hello.

  I would like to ask if there is possibility to send videos in full hd laptop (it has only the D - Sub port). Thank you for your attention.

  Can you please tell me how to send the full HD signal from your laptop without HD-DVD player and HDMI output? I think that it cannot work.

  As far as I know that something like this is possible only on Qosmio G30 with HD-DVD and new Qosmio G40 player. The two laptops have the HD - DVD and HDMI output.

• Satellite A100 - I can't use the printer Lexmark X 3330

  However, I have a Lexmark X 3330 printer that is set as default, I cannot print to it. The Pdf doc seems ok and recognizes the printer but nothing comes up when you press 'print '.

  All drivers have been updated - suggestions?

  Hello

  I recommend you to check the settings of the printer and fax machines.
  Your Lexmark X 3330 printer must be set as the default printer.

  Check it out!

• Satellite A110-275: can I use FAT32 instead of NTFS with recovery CD?

  Satellite A110-275
  Can I use the file system fat32 instead of ntfs disk recovery system.

  Hello

  Well, on the Toshiba Recovery CD you will find only the ghosts.
  This ghost files contains image with all the files and data from HARD drive.
  I guess that the image was made on NTFS.

  I think it s not able to change the file system on the HARD disk without formatting or losing data on this HARD drive.
  If you want to change the FAT32 file system, you must format the HDD to FAT32.

  But I put t know why you want to do. It makes no sense to me.
  In my opinion, the NTFS system is more powerful than FAT32

• Tecra R10 - how to remove the memory module?

  Hello!

  How to remove the memory module?

  Get the following message and for me, it means that one of the modules is broken:

  Out of memory error
  Address = H 00034000
  Read Date = H 28034000
  Write data = H 00034000

  For my opinion, the computer should start up again when I remove the memory broken slice?

  The Australia has soon

  Hello

  You can easily remove the memory modules.
  I think that the Bay is placed at the bottom of the unit.
  Remove the screw that is blocking the Bay, and you will have access to the module.

  Here is a video of how do this on another Satellite L500 laptop. But the procedure is not very different on Tecra R10
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=81

  I hope this helps a little