Satellite A110-275: can I use FAT32 instead of NTFS with recovery CD?

Satellite A110-275
Can I use the file system fat32 instead of ntfs disk recovery system.

Hello

Well, on the Toshiba Recovery CD you will find only the ghosts.
This ghost files contains image with all the files and data from HARD drive.
I guess that the image was made on NTFS.

I think it s not able to change the file system on the HARD disk without formatting or losing data on this HARD drive.
If you want to change the FAT32 file system, you must format the HDD to FAT32.

But I put t know why you want to do. It makes no sense to me.
In my opinion, the NTFS system is more powerful than FAT32

Tags: Toshiba

Similar Questions

  • Satellite A110-275 restarts after a stop on the current

    Hello

    After installing xp sp3 if I stop my laptop while on external power, it seems to stop and power off of the fine - then 5 seconds later, it restarts?

    If I turn off the external power (or pull the power cable on) if the machine is running on its battery - then stop - everything works fine. I have checked the event logs and see no error which would cause a reboot on shutdown. I disabled the reboot on system error switch and I turned off the wake of the bios on the options.

    I also looked in Device Manager and off anything that could wake the machine after his stop (only found the modem). I am at a loss - I don't see why external power would cause the works to restart but battery very well. Finally its possible this safe mode can also not working after installed sp3.

    If anyone has any ideas - I'd appreciate really them. It looks like there may be a newer bios available (I'm on V1.2) but I've seen a few posts cautioned against an updated bios windows at level - once again any info - very very welcome.

    System information:
    Toshiba Satellite - A110-275
    Windows XP pro - sp3

    > After installing xp sp3 so I stop my laptop while on external power, it seems to stop and power off of the fine - then 5 seconds later, it restarts?

    Have you noticed this problem before installing SP3?

    Its strange noises that this occurs only when the laptop is connected to the power adapter

    I searched in the forum for similar issues and in many cases enabled Wake up on LAN would cause a reboot.
    I know, you have this disabled in BIOS, but you should also check the LAN card properties in Device Manager.
    You will find an Advanced tab can disable this option too!

    Satellite A110-275 belongs to the series of PSAB0E.
    There is a new BIOS for PSAB0E series.

    BIOS v2.0 is OS independent. Means that he s created for Win XP and other OS.
    V5.40 BIOS is only for Vista OS.

    If you are using Win XP, then you should take the independent BIOS of the OS!

    Here you can find details of the update to the BIOS:
    http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=60

  • Satellite A110-275: more a low-memory graphics card after BIOS 1.30 update

    Hello

    I am the owner of:
    Satellite A110-275
    Part number: PSAB0E-00T00TEN
    graphics card intel gma 945 up to 128 MB.

    Recently, I updated the bios of 1.20 to 1.30 and after reboot, I lost 64 megabytes of 'graphics card capabilities.
    After bios update, my computer is much lower. Why? How can one get 128 MB of memory on my intel gma 945?

    also s it is possible to manually change a file and configure gma 945 capacities up to 256 MB? I have a lot of ram and I could use it for games, now I can use only 8 to 64 MB.

    Concerning
    Piter

    Hello Pit

    I posted my opinion that I don't think there could be a problem in your second topic.
    As far as I know the laptop came with graphics card Intel shared memory. 8-128 MB of memory could be chosen.

    To my knowledge the Intel driver graphics card automatically controls the value of memory sheared. If need more than MB of graphics card memory so it will be assigned automatically.

    PS: In my opinion it is not possible to select 256 MB because the hardware does not support.

  • Re: Impossible to turn on the Satellite A110-275

    Hello

    I was using my laptop 100% fine last night and this morning it just will not light. I plug it into the "connected" light comes on as usual but the battery charging light does not work and the power button does nothing... Help?

    Any ideas would be appreciated, as I like my XP Satellite A110-275.

    Hi iam12volt

    Sometimes this happens to other laptops as well... In most cases, remove the battery for 5 minutes, can do the trick. (disconnect the power cable as well)

    See you soon

  • Satellite A110-275: digital recording of cassettes

    I have a Sat Pro A110-275. Nothing else added. Can someone tell me how I can use it to record tapes to a digital format? What should I buy material additionl / software?

    See you soon

    Kilfinnan

    Hello

    Are you sure it's a Satellite Pro A110-275 and not Satellite A110-275?
    I found only a Satellite A110-275!

    In addition the tapes you want to turn into a digital format?
    VHS or audio only?

    As far as I know this device supports only a tv out port. In this case, you are only able to send a signal to TV but do not receive all the signals.
    In my opinion you will need a 3rd party card PCMICA or any device which is capable of receiving video or audio signals (to jack)

  • Cannot start my Satellite A110-275

    Hello

    I had one laptop Satellite A110-275. After the first days, when I bought someone spilled a glass of water. I send the laptop on a center here in Canada they have change the motherboard. Laptop worked for several months and a few weeks ago are starting to make me a problem such as:
    I start it and everything seems ok all lights are blue lit, I hear when the beginning of the video card fan and nothing appears on the screen.

    In the past after a few opening and closing laptop computer started but now its saying DEAD leds.
    Could be the processor or even once the motherboard? I already changed the 2 GB memory and nothing.
    Could someone help me with some ideas?
    Thanks in advance.

    Processor A110 - 275 Intel Core Duo T2400 satellite clocked at 1.83 GHz 2 GB of 533 MHz DDR2
    Thank you

    Hello Marina

    Please don't get me wrong, but I don't think there is that you can only do about it.
    Of course, there is a serious hardware problem, probably with the motherboard. I don't know which component is troublemaker, but if your computer laptop doesn't react at all, it can be electronic power supply.

    It may be the CPU. It may be the motherboard, but you must understand that it is not possible to provide an accurate diagnosis on this path. What you need is a professional help. Laptop must be controlled by diagnostic tools and it can be done in only authorized service. Contact them and explain the situation.

  • Satellite A110-275 - is it compatible with Windows 7 or not?

    Hello

    I would like to know, is the Satellite A110-275 for computer laptop windows 7 compatible? I can't see this series in the Web of Toshiba site "Download Windows 7 drivers".

    If not, is it possible, that it could be made compatible?

    Thanks for your help.

    Raja

    Hello

    To be honest, I don't know if it's compatible, but as I know that most Vista drivers work fine with 7 too.

  • can we use DIV instead of tables in the APEX

    Morning friends,

    can we use < div > instead of using tables in the APEX. If so, let me know da procedure. Please make me understand in layman's term, as I just started learing APEX.

    Greetings
    Jean francois

    As I said in the first line of my first post:

    Yes, you can. You must do this in page templates, region or report on shared components of the request of the manufacturer.

    If you look at, you'll see the models and all the table tags HTML. I would say that you copy a model at a time and work with your copy so that you don't the hose upward standard Apex stuff.

    Earl

    Published by: Earil on April 9, 2009 08:57

  • Can I use Siri new Apple remote with my Apple TV 3rd generation?

    Can I use Siri new Apple remote with my Apple TV 3rd generation?

    No. not compatible.

  • Can I use HP jet Office 2131 with mac

    Can I use HP jet Office 2131 with mac

    No reason to think that you maybe isn't able to use it with a Mac?

    According to the specs on HPs website, it is completely compatible with Mac.

    http://WWW8.HP.com/in/en/products/printers/product-detail.html?OID=8414102#! tab = specifications

    Operating systems supported: Windows 10, 8.1 Windows, Windows 8, Windows 7
    V10.8 OS X Mountain Lion, OS X v10.9 Mavericks, Yosemite OS X v10.10

  • Can I use the CD that came with my Palm Z22 to install on my new computer Windows 8 2005?

    I'm upgrading from a Dell XP machine on a computer Dell Windows 8.  My old Palm Z22 driver installation CD will work to load the software into my new Windows 8 machine; or do I need to download a new software specifically for Windows 8?

    After losing almost three frustrating weekends, I finally got my Z22 to synchronize with Windows 8.  You never answered my first question [can I use the CD that came with my Palm Z22 to install on my new computer Windows 8 2005?], that would have eliminated a lot of uncertainty in my many attempts to synchronize with the download of version 6.2 has recommended you.  Fortunately, I wasn't the original CD with version 4.2, because 6.2 has toured with a bit more clear instructions and a new download of http://www.palmdr.com/windows-7-64-bit-usb-drivers

    Thanks for your advice in any case.

  • Can I use old AC adapter / CC with new X 1 carbon?

    I have a surplus of my first generation AC adapter X 1 carbon. It's 90W/20V. The adapter supplied with the new machine is quite a bit more small and only 65W/20V. Can I use the adapter 90 watts with the new model X 1, or it will damage somehow? Don't want to ruin my brand new computer.

    Yes you can. I use it all the time.

  • Conversion: Can I use Corel WordPefrect 8 data with Windows Vista files?

    Can I use data files Corel WordPefrect 8 with Windows Vista?

    On Friday, June 11, 2010 17:03:40 + 0000, grandmadfs wrote:
     
    > Can I use Corel WordPefrect 8 data with Windows Vista files?
     
     
     
    The issue here is not one of which version of Windows you are using.
    It is one of what you have installed applications.
     
    The answer is Yes, if you have WordPerfect (or some compatible)
    program) installed on Windows Vista. The answer is no, if you do not.
     
     
    Ken Blake, Microsoft MVP (Windows desktop experience) since 2003
     

    Ken Blake

  • can I use my old photosmart c7100 with e-print?

    can I use my old photosmart c7100 with e-print?

    Sorry, the C7100 isn't compatible ePrint.  The ePrint printers are listed here.

  • Can I use PeopleTools 8.54.02 with PeopleSoft HRMS 9.1

    Can I use PeopleTools 8.54.02 with PeopleSoft HRMS 9.1? I understand I have to sacrifice some of the benefits PT 8.54 / features to be in HCM 9.1, but would like to find that out and see what that my options to stay 9.1

    Please notify.

    Thank you

    Hello

    Don't know exactly what are the benefits or function will not work with this merger. But yes, oracle certified HCM 9.1 with the peopletools 8.54. Please find the certification screen shot below.

    Thank you

Maybe you are looking for

  • I am always safe from threats using Aurora?

    I used Aurora in the past and I think use again. I wonder if I'm sure threats such as viruses, spyware, etc. with Aurora.

  • Flip Dock Stand &amp; smart charger

    Hello They sell the Flip stand with a smart charger in th U.S., but not over here that I can see. The American Motorola site indicates that in conjunction with the RAZR M gives you the possibilities clock dock the RAZR I used to have before the JB up

  • Need help to update BIOS on Satellite L30-113

    Hello I just downloaded the latest update of the BIOS for my Satellite L30-113 (PSL 33) and I was about to install when I remembered that I actually downgraded to Windows XP(this notebook is originally with WIndows Vista).My question is it will produ

  • Enter the product code to install procedure.

    Just installed Windows 7;  Why he is waiting until the end of the process to check the product code. At this point, all the Windows files have been changed and you are stuck.  Thought it should be loaded from the disk with the same result.  Lost all

  • Update xmlcore servicepack2 (kb954430)

    I have my automatic updates on, but since the beginning of September. whenever I'm online I get the news updates are available, I will install the updates and install it it says its installed sucsessful.i go back to what I was doing online and about