Satellite A300 - How can I reinstall my Vista without CD?
in an earlier era, I wrote:
http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=148620#148620
HI :)
I have a little problem. I forgot to burn a recovery on the CD disc.
I know that there is a special partition on my hard drive with Vista.
How can I get there. How can I reinstall my windows as at a time of trees?
Thank you very much
I'm waiting for a good feedback!
Concerning
longplej2
My laptop is Toshiba Satellite A300 :)
you said that:
Do you mean that you want to use HARD drive recovery option?
If yes then you must press the F8 laptop computer powered on.
Then choose fix my computer.
Then a new window will open, here you have to choose the last option called Toshiba Recovery.
BUT I want to completely remove vista and install once more of my Special partiction with vista on my toshiba as at first, when you're editing vista on toshiba
HOW CAN I DO?
Thank you very much!
longplej!
First of all, you should not open two threads on the same topic!
Second, the procedure posted in the other thread and this ad above describes how to install the second HARD drive partition Vista!
Once again;
Press F8, choose repair my computer, choose Toshiba recovery of new open window and follow the instructions on the screen.
After this procedure, you will get the laptop as on the first day of purchase!
Tags: Toshiba
Similar Questions
-
How can I reinstall my Vista without CD - Satellite A300
HI :)
I have a little problem. I forgot to burn a recovery on the CD disc.
I know that there is a special partition on my hard drive with Vista.How can I get there. How can I reinstall my windows as at a time of trees?
Thank you very much
I'm waiting for a good feedback!
Concerning
longplej2My laptop is Toshiba Satellite A300 :)
Hello
Do you mean that you want to use HARD drive recovery option?
If yes then you must press the F8 laptop computer powered on.
Then choose fix my computer.Then a new window will open, here you have to choose the last option called Toshiba Recovery.
All that s
-
How can I reinstall Windows Vista without CD?
How can I reinstall vista without cd?
Hello
If you bought a name brand computer (Toshiba, Acer, Dell) would have received you either a disc of recovery with your purchase or you'll have a recovery Partition on your hard disk to reinstall the operating system.
Look in the manual if one came with your computer or contact the manufacturer for help.
If for some reason any you do not have a recovery partition or not sure where to find it, the manufacturer will be you advisor about this and if necessary we will send a recovery disc for a low cost.
How to replace Microsoft software or hardware, order service packs and replace product manuals
http://support.Microsoft.com/kb/326246
See you soon.
-
How can I reinstall Windows Vista without the disc?
original title: what to do?Staples load Vista on my computer but never gave me the disc, I need to format my drive, but I have to for on activation code reinstall. What should do?
Staples load Vista on my computer but never gave me the disc, I need to format my drive, but I have to for on activation code reinstall. What should do?
You probably have a restore disk partition that can be used to reinstall Windows. See your documentation or check with Staples to learn more.
Note that formatting the drive and reinstalling WIndows are a very bad approach to address any problem. What makes you think you need to do this?
And please note that a subject line that says: "What to do?" we said nothing and is likely to get your question ignored by many people. The subject must always be a brief description of what the problem is - in your case, something like "Want to reinstall but have no disc."
-
Resettlement without disks
Hello. I have a computer bought from a friend with windows vista home premium installed. I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system? Thank you, KimHello. I have a computer bought from a friend with windows vista home premium installed. I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system? Thank you, Kim
You have a hard drive partition to do - but you would need to contact/see the FAQ from the hardware manufacturer (HP, Dell, Gateway, Lenovo, etc) to see if and how.
Otherwise - you might have to order (pay for possibly) the factory restore/recovery of the value of the manufacturer.
If it was built * friend *, you will communicate with them. Ask your media.
-
How can I reinstall windows xp without cd original games
How can I reinstall windows xp without cd original games?
Hello
Unfortunately, you can not install XP without the Setup CD games.
Reference:
http://support.Microsoft.com/kb/307768See also:
-
How can I stop windows vista without updating the updates
How can I stop windows vista without updating the updates because it affects my computer in error mode and I have to restore to get vista to startup after I reopen it later
Hello
You can change the settings for windows update to check for updates but let me choose whether to download and install them.
Change how Windows installs or notifies you of updates
You can also check in the update to the update history recently failed, double-click the update to get the error code and let us know.
See the Windows updates are installed
You can also read the following article to reset the Windows Update components and check.
-
How can I reinstall the CC without having to start a new account after a hard drive change?
How can I reinstall the CC without having to start a new account after a hard drive change?
Just got my PC back from repair with a new drive installed and al, I see for the CC options for new accounts to create, I already have one so I want to reinstall my account without having to pay for a new account. Can someone tell me how to do it please?
Hello
Please visit the given link to download CC: download and install Adobe Creative Cloud applications
* Connect with your Adobe on which you have registered the product ID.
Concerning
Bianka Attre
-
How can I reinstall Acrobat 8 without the disc? I switched from XP to Windows 7. I have the serial number.
Hi cawcaw70,
You can download Acrobat 8 from: products download Acrobat | 9: 8
and use the serial number to activate the software.
Kind regards
Rave
-
How can I reinstall Windows Vista?
I have a Toshiba laptop with Vista installed ready recently, but what happens if, at some point in the future, I need to reformat?
How can I reinstall Vista without a disk?Thank you.
I think that you have not looked in the user manual. This, because there you can find a lot of information how do I reinstall Windows Vista.
However, the computer Toshiba laptop with Vista have a HARD drive recovery function. On the second partition is a file called "HDDRecovery". It contains the image of the factory settings, and so you can reinstall the laptop without CD/DVD.
In addition, you can also burn the recovery disks with the Toshiba recovery disc creator and you should do it too. If a faulty HARD drive or something else you need this floppy and otherwise, you must pay for it.
Normally, you should get the message of reminder of recovery on your laptop and it contains interesting information:
+ Important INFORMATION +.
+ your system is equipped with a hard drive recovery system. If you need repair.
+ your computer in the restaurant to original factory State, you can do it directly.
+ HDD (press F8 when you start your computer, choose "Repair your computer" +)
+ and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.+ Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
+ Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
+ Gets severely damaged. -
How can I reinstall vista without the disc and remove windows 7 (an illegal version) also without the disc. I have only the original vista coded key stuck on the computer when the vista system installed on the purchase of the computer. My daughter was not happy with vista and had someone to install windows 7, which turned out to be an illegal version.
Hello
If you have a recovery partition likely has been cleared by installing Windows 7.
You can try the recovery partition, no guarantees.
There is no Windows Vista downloads available from Microsoft.
You can contact your computer manufacturer and ask them to send you a set of recovery disks.
They should do this for a small fee.
To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:
You need to change the Boot order to make the DVD/CD drive 1st in the boot order:
How to change the Boot order in BIOS:
http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm
"How to replace Microsoft software or hardware, order service packs and replace product manuals.
http://support.Microsoft.com/kb/326246
And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.
The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)
Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.
Ask them to the proper key sequence.
Some manufacturers have more available Vista recovery disks.
If this happens, you may need to try this instead:
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:
"How to do a clean install and configure with a full Version of Vista '
http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html
And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.
And phone Activation may be necessary when you use the above installation method.
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
See you soon.
-
How can I reinstall vx3000 webcam without software
Recently, I lost almost all ofrom my PC. I have aLifecamVX3000 but no software. How can I reinstall webcam?
Hello
Maybe try this Microsoft Download:Good luckrd581 -
MS Paint and calculator are missing in accessories in the start menu, and I tried to find the two through the enforcement of typinh program in mspaint and Calc. But they can't be found. How can I reinstall them if I don't have the cd of Windows XP service pack 3?
First, check that they are really missing:
Do a search on C: together in car for calc.ex, making sure to specify "Search the hidden files and folders", "Search system folders" and "Search subfolders". Be sure to leave on the last 'e', as shown.
Calc.exe should be in C:\Windows\system32 and C:\Windows\system32\dllcache
Even if it is not in those 2 places, you can get lucky and find (or calc.ex_), another place.
-
Re: Satellite A300 - how can I make the webcam work on Win7
Hello everyone.
I had Win Vista installed on this Satellite A300 and it worked well.
I had no problem at all.Then I moved to Win7 and now I'm going through the test of the work of webcam.
I tried to install all types of drivers, even those for A500, but it would be of no use.So, how can I make the webcam work on my A300?
I've tried everything, even the installation of Ubuntu on this laptop and still it wouldn't work. If this is your interest, I'm under Win7 in Spanish, x 32, Home Edition.
I really need your help here, please, I beg you, I spent 5 days ago almost try ANYTHING!
And yet, I get the message after each installation/reboot of the: "the camara web esta disabled o ha Fall.» "Por favor, it check las web camara su configs", which would result in something like "the webcam is disabled or it has failed. Please check the configuration of your webcam. I've been browsing the forum for related issues, but I have not found any solution :(Thanks in advance,
Ozma.
Hello
Seems the webcam software has not been installed correctly.
That Win 7 OS do you use? 32-bit or 64-bit?Here you can find Chicony webcam driver for Win 7 64 bit
http://Support1.toshiba-tro.de/Tedd-files2/0/webcam-20091026100013.zipand here you can find Chicony webcam driver for Win 7 32 bit
http://Support1.toshiba-tro.de/Tedd-files2/0/webcam-20091023184836.zipGood luck
-
Re: Satellite A300 - how can I choose stand in power saving mode?
Hello!
In older versions of the power management utility, I could choose Stand by mode when the laptop lid is closed. But in the new versions of Power Saver is available only Hibernate mode. I don't need the Stand By mode. How can I solve this problem?
My old laptop A75-S206, Windows XP, power management utility version 1.23.2.5
The new laptop A300-1 OC, Windows XP, Power Saver worm 7.04.02.IThank you
On my Satellite L300 with Power Saver too I choose stand by mode if I close the lid. So, you should try to update the Power Saver software.
Search on the Toshiba site: http://eu.computers.toshiba-europe.com > support & downloads > download drivers
Maybe you are looking for
-
Hi I have a Apple Watch. And whenever I put my wrist down or does not use my Apple Watch during a certain period it turns black. But when I type the watch using the app again, I have to go all the way back in my apps and reopen it. Y at - it a faster
-
Problems with the activation of Windows XP 2002
Help! Is there someone out there who can help me solve this problem? I have a PC with Windows XP Professional 2002, Service Pack 2, control my LC - MS instrument that uses the MS Xcalibur software. Four weeks ago, I had a PC crash and re installed W
-
New HP 8620-Pro does not appear "front to the rear/back to front" option
I just installed an OfficeJet 8620. Preferences is not showing an option to change the printing order rear etc.. I talked to HP tech support, and I have uninstalled and reinstalled the software - not good. I restarted my computer. ?????
-
I lost control of the mouse and fonts start to break up and system begins to restart.
-
Lost files after that the user profile service has no problem
In order to correct a problem with the user profile Service failed, I followed the instructions at support.microsoft.com/kb/947215 to remove the corrupted profile and create a new. Profile corrupt (probably) was my usual login and my login of admin