Satellite A300 - install the secondary hard drive

Hi all

I'm new to the forum.

I was thinking about adding a second hard drive of my laptop.
I saw that there is a single disc and a space for a second

Is this possible? If so, what drive would be worth?

Thank you

Hello

In my opinion this is not possible.
To me, it seems that there is no second connector and to the 2nd HARD drive controller.
There is a second HARD-drive bay because there are different models A300 with a different hardware configuration and motherboards, but the same top and bottom covers, so there is a 2nd HARD drive Bay even if the connectors are not available.

Tags: Toshiba

Similar Questions

  • Satellite L450 - install the new hard drive

    Hi, I hope someone can help, I have a Satellite L450, which has windows 7 preloaded on it. However, the hard drive became corrupt and unable to use, unfortunately I never backed up anything.
    Can I buy a new hard drive and install it? If yes how to operate as I no o/s on cd?

    Thanks in advance

    Hi 4ordie,

    Of course, you can replace the HARD drive that s no problem. Replace HARD drive has 5 or 10 minutes and you can do it yourself because it s not very complicated.

    New drive HARD doesn t contain all the files and you will need to install the operating system and all the drivers yourself but I m wondering why you don t have an installation disc (recovery). It s clearliy mentioned in the manual how to do this.

    In any case, no, you can order a Toshiba Recovery disk to restore to factory settings:
    https://backupmedia.Toshiba.EU/landing.aspx

  • Windows 7 loses the secondary hard drive

    This has been a problem, I don't know why I waited this long to ask about it.

    My secondary hard drive keep endangered of Windows 7, as if someone unplugged spontaneously, except that it's still there.

    This problem can be resolved by restarting just the computer, and it can remain correct for a few minutes, a few hoursor a few days, but it still exists, usually several times a week.

    I checked all connections and even swapped the cables. There is nothing wrong with the drive itself, I can put it in another computer without this problem occurring. I also tried to move to an another empty SATA connection on the motherboard without success.

    I do not use the drive on a regular basis and bought only so that the steam and the game files that are, (and now the original since I finally broke down and got Mass Effect 3 despite efforts to avoid EA "me too!" steam clone.) were not cluttering up my main hard drive.

    But when I decide to take a load off and play games, I like for the reader to be there without needing a reboot, it can so be a little frustrating because it's usually when I am stressed already :)

    Thanks in advance for any help offered.

    Notes:

    PC is a version custom;

    HARD disk: 300 GB wd velociraptor (Primary)

    HARD drive: 600 GB wd velociraptor (Secondary)

    PSU: 1200w

    MOBO: EVGA classified (not sure about the top of my head that one in the series)

    CPU: intel core i7 950

    GPU: nvidia geforce gtx 680 (EVGA)

    MEM: 6 GB DDR3

    Hello

    Thanks for posting your query in Microsoft Community Forum.

    Disks RAID configured hard two?

    Internal hard disks connect to the motherboard of your computer using an IDE or SATA interface interface. Most new hard drives come with an IDE or SATA connection cable, depending on the type of drive.

    Install an internal hard disk takes a bit more work, especially if you plan to make the new disk your primary hard disk where you install Windows. Drive hard internal jumpers that you set to configure the main hard drive (master) disk where you install Windows or a secondary (slave) drive where you store programs and files. For the diagnosis of your problem, I suggest trying the following methods and check if the number is reproduced.

    Method 1:

    Check if you are able to view the second hard disk (HDD) in Device Manager. If so, try to change drive letter assignments in Windows 7. See the following steps:

    (a) connect to the computer as an administrator.

    (b) click Start, right-click computerand then click Manage.

    (c) click on disk management.

    (d) right click on the volume of the secondary HDD that you want to change and then click change drive letter and paths.

    (e) double click on the secondary drive, click change, click the drive letter that you want to use and then click OK.

    Additional information:
    Change, add, or remove a drive letter
    http://Windows.Microsoft.com/en-us/Windows7/change-add-or-remove-a-drive-letter

    If method 1 does not resolve the problem, go to method 2.

    Method 2:

    I suggest you try to check the secondary hard drive to find errors.

    Consult the following link:

    Check your hard drive to find errors in Windows 7

    http://support.Microsoft.com/kb/2641432/en-us

    Warning: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

    If method 2 does not work, go to method 3.

    Method 3:

    Try to run a scan of the file system (CFS) auditor to check any file corruption:

    1. Go to Start, click all programs and open the Accessories.
    2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, click OK, or alternatively click on Yes.
    3. In the command prompt, type the following command and press ENTER:
      sfc/scannow

    For more information, refer to this link:

    http://support.Microsoft.com/kb/929833/en-us

    Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  • HP EliteBook 8440p: Best boot option after installing the new hard drive and put to memory.

    I just installed the new hard drive for my laptop and will get the cards of two memory installed tomorrow. I would like advice on what would be the best option to start when the laptop for the first time I'm on fire.

    I have the original Windows HP recovery disk came with the computer.

    I also have a recovery disc and a system image on disks created with Macrium Reflect two days ago.

    I also have a recovery disc and a system image is created on an external hard drive Seagate two days ago. (I've read mixed reviews on these is currently working as a media of rescue with Win7 Pro).

    I guess if I use the HP recovery disc I would be then just use any system image I prefer, without the recovery disk. Anyone know if it makes a difference at all which method to use?

    bozzle73

    My recommendation would be to restore using the image of MR (Macrium Reflect) you did.

    But then, I used Mr. on all my PCs for years and am a big fan - having had it Miss ever in the years and years of use.

    You will need boot from the boot of MR media (you did that right) and, if you photographed all the required partitions for the operating system, restore it on the new drive should take a few minutes, and when this is done, you reboot and everything should be OK.

    Good luck

    I'm a volunteer and I do not work for, or represent, HP.
    ========================================================================
    If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

    If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

  • HP Pavilion DV6-6c35dx: potential problems with OS driver install the new hard drive?

    I want to spend the hard drive of my laptop, but my laptop did not come with recovery discs. I buy a full copy of Windows 7 Professional, but I did save it... because when everything has failed, I guess. If I'm able to reinstall Win 7 Home or if I have to install Win 7 Pro, how can I be sure to reinstall all drivers HP (p. ex., trackpad, meaning cool, beats audio, etc.) for my machine? It is best to download the drivers before you install the new hard drive and have them ready on a flash drive. or is there an easier way? Thank you.

    I personally prefer the new OEM installation & then get required drivers to download for HP support for your laptop model.

    It is slower and more difficult to do if it is not too well known, but the end result is much better.

    If your system has flaws you should try to fix first, but better long-term results come from clean install generally.

  • What do I need install the second hard drive HP PAVILION: p6633w

    What do I need install the second hard drive HP PAVILION: p6633w?

    donp815 wrote:

    What do I need install the second hard drive HP PAVILION: p6633w?

    Hello

    You need two cables, one is a sata cable:

    http://www.play.com/PC/PCs/4-/30305659/706331346/STARTech-com-6in-SATA-to-right-angle-SATA-serial-ATA-cable-female-SATA-female-SATA-6-inch-red/ListingDetails.html?_%24JA=TSID:13315% 7Ccat: 30305659% 7Cprd: 30305659 & kw = {keyword}

    This cable is only for data and connect the hard drive to the SATA connector on the motherboard.

    The other cable is energy:

    http://www.itpartsdirect.com/STARTech-15-24cm-4-pin-Molex-to-SATA-power-cable-adaptor.html

    It connects the hard drive to the PSU.

    You can also buy a combo like this cable:

    http://www.Amazon.co.UK/DP/B00064GBT4/?tag=hydra0b-21&hvadid=9550951989&ref=asc_df_B00064GBT4

    All you have to do is to connect the hard drive and that's it. Make sure that the main drive with the operating system is connected to the primary SATA connector (I think there are the numbers 1, 2, 3...)

  • When I plug my new Seagate Free Agent Desk GoFlex external drive, I get an error message saying that Windows does not recognize the hardware. I'm stuck and need help to install the external hard drive.

    My problem is that the software is supposed to be on the disk but I do not see the player to download. I tried to download the Seagate Manager, but it shows no available disks. Any help will be most appreciated.

    Also, I tried to install the external hard drive on a Windows Vista 64-bit computer and a Windows 7 Home Premium 64-bit.  Same result on both.

    Hello

    I suggest you try to run this under fixit and check if it helps:

    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

    It will be useful.

  • XPS 15 (L502X) - disk HARD death - where can I get the Windows7 DVD to install the new HARD drive?

    Hello
    I have a XPS 15 / L502X 2011 - dead HDD now - and I installed a disc SSD - BUT where/HOW to get the Windows Installer DVD for my PC.
    Can not get with the old drive - I did a Rep old installtion disk - and I DO not think that this contained the windows and drivers for my DELL.
    But it doesn't! :-/

    How now to install the new HARD drive on my dell? Anyone?

    BR
    René

    ROFMAN

    If you are a resident of the United States and are the registered owner of the computer, a disk that contains the operating system specific to your system factory installed can be requested HERE.

    Note: Dell may charge for the disc.

    If you do not live in the United States, contact the Dell Technical Support which is in your country.

    Bev.

  • Installed the new hard drive and now can't activate Widnows 7 as it says not valid for clean installation

    This computer is having problems and we tried to upgrade to Windows 7 hard drive crashed.  We installed the new hard drive.  Now, we try to activate this copy but code comes up saying invalid for a clean install.  We need to have some new code or just get ours to work.

    Skip entering your product key Windows 7 and complete the installation.

    When you reach the desktop, click Start, right-click on computer

    Click on properties

    Scroll down to the Windows Activation

    Click the link x days before activation.

    Click on the link that says: "show me other ways to activate.

    Enter the product key

    Click next

    Select the Activation of the phone

    Click Next when you enter your key page

    Select your country

    Click Next, call the number listed

    Be sure to explain your situation to the Appeals Officer.

    Provide the installation generated when ID requested by the call agent

    They give a confirmation ID in return, enter it

    Click next to complete the activation.

    However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

    15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

    So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

    or

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

  • I'm having trouble installing Photoshop CS6 after installing the new hard drive.  What do you suggest me?  Tony

    I'm having trouble installing Photoshop GS6 after installing the new hard drive.  What do you suggest me?  Tony.

    CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

    You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

    Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

    CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

  • I need to reinstall Adobe Acrobat 11.0 I bought in 2014. I lost my hard drive and need to install the new hard drive.  No idea what I'm doing!  Thank you!

    I need to reinstall Adobe Acrobat 11.0 I bought in 2014. I lost my hard drive and need to install the new hard drive.  No idea what I'm doing!  Thank you!

    http://trials2.adobe.com/AdobeProducts/Acro/11/Win32/AcrobatStd_11_Web_WWMUI.exe

    This is the file I download - but when I go to the Setup process, I bought for the installation program Adobe Acrocat Pro XI (11.0.07).  When I insert my serial number, he wanders as invalid.  I am running Win 7 Pro.  It worked fine on my old hard drive.   I think I maybe win64.  Does it matter?

  • Add the secondary hard drive to dv7-3130eo

    Anyone know if it is possible to use the secondary hard drive Bay on the above model.

    I searched and could not know whether or not it is supported. If it supports this what should I use to add an sdd drive

    Yes, it can be used. You just need the hard drive caddy and the connector like the one that is in the hard drive Bay. They are available online or on eBay for maybe $45.

    example of

    Yes, the hard drive can be an ssd. SSD drives have the same physical dimensions and connections such as a SATA drive. You need the money because I just don't see prices of SSDS come down to where I think it makes sense to invest in one. I ran an ssd in my last laptop... paid about $400 for a concert 128 2 years ago and I don't think they are much cheaper now, although they are better I guess. It was all that (fast, quiet, cool), but it was nagging little glitches on writing on the disc and occasionally she just sat there for a few seconds and think about doing something. I changed a standard 7200 RPM drive.

  • Need help to install the new hard drive in Satellite Pro M10

    Hi all

    My hard drive died in my M10 Pro Satellite so I decided to adapt to another.
    It fits very well in the caddy, but just does not want to slot into place correctly as something seems to be stopped.
    The M10 only accepts a certain brand/model?
    Also, nobody knows this as the largest capacity M10 will accept?
    Thank you very much.

    Concerning
    J

    As much as I know should not be problem at all. Take the old and the new HARD drive and compare the connectors. I hope that they are the same. I can only imagine that the new HD is not placed correctly in the HARD drive bracket. Make sure that the new is placed as an old man after his retirement from the laptop.

    As for max capacity of HARD drive, there is no precise information and we can only speculate on this. Try to use the search option on this forum. Maybe someone already talked to upgrade the HDD on Sam/Satellite Pro M10.

    The fact is that Satellite Pro comes with 30, 40 and 60 GB hard drives. How many GB does your new HARD drive?

  • How to install the second hard drive in the Satellite A200-1 of body weight?

    I see my new Satellite A200-1 of body weight has two hard drive bays, the research in the second span, I don't see how a second drive can be mounted as the plug into the Jack seems to be missing.

    What parts do I have to mount to place a second drive that they are held in stock by out of the local computer and are quite cheap, can someone advise me on part numbers etc of the bits I need.
    Thank you
    Steve

    Hello

    I know that this empty place for second HARD drive is a bit confusing, but the same situation is with my A200-1CR. The fact is that some A200 models come with 2 hard drives and laptop case design this place must be prepared for this second HDD.

    But this does not mean that each A200 can be improved for the second HARD drive.

  • Accidentally installed Windows 7 on the secondary hard drive

    I had Windows XP Professional for awhile and decided to upgrade to Windows 7. So when I went to install Windows 7, I accidentally installed the wrong hard disk (hard drive instead of my first high school). Is there a way to completely erase the two hard drives and install Windows 7 on my primary?
    Thank you
    Newbie Tech

    Install EasyBCD in Windows 7 and see if has the ability to 'Add' another OS (located on the Windows XP partition in your case).

    EasyBCD (free for non-commercial use):
    http://NeoSmart.NET/DL.php?id=1
    http://NeoSmart.net/blog/2012/announcing-EasyBCD-2-2-Windows-8-dual-booting-and-more/

    J W Stuart: http://www.pagestart.com

Maybe you are looking for

  • Lack of Podcast episode

    Hello Episode 17 of my podcast, heroes of the screen, is absent from iTunes. I checked my RSS feeds and I don't see any problems. What are the next steps to determine the cause of the missing episode? Episode 17 was published on 13 April. I asked a p

  • Error 0 x 80070002 - tried all suggestions still cannot update

    Computer update-watch the 0Xz8007002 error - tried all of the suggestions - does not always update

  • The downloaded songs will not import into Windows Movie Maker

    Windows Movie Maker Vista I downloaded 6 songs to itunes and have converted their MP3 using itunes software. Two of the six will download in movie maker, Windows Vista 64 bit and I don't understand why the other 4 wrong?

  • epson rx500 driver pour windows 7

    Hello all, I have a computer not laptop with Windows 7 as os and I wanted to print with my EPSON RX 500 and my computer does not detect that the scanner, on the other hand he tells me not to have the right driver, the it so research and obviously can

  • Alienware X 51 to Win 8 but drive update fail WARNING

    I have an Alienware of X 51 which was running Windows 7 and decided to use my Windows 8 Pro upgrade (to roll to the point 8.1). On installation, update Win 8 warned me that the hard drive is about to fail and refused to let me install. I replaced the