Satellite A300-RJ1 should I do a clean install?

Similar Questions

• Satellite A300-10 s / wireless network hardware not installed

  Hello

  Yesterday, I bought a Satellite A300-S10; everything works fine, except for wireless network equipment. When I go into Device Manager, I see 'controller Ethernet", with a yellow exclamation point listed under 'other devices '.

  I downloaded some drivers of your wireless download page. Problem is that I don't know what wireless hardware is inside this laptop, so I don't know which driver I excactly must download and install. I tried a few, but those who did not.

  OS: Windows Vista 32 bit.

  Can someone help me please?

  Thanks in advance,

  Nicolas

  Hello Nicolas

  Just a question: has your laptop factory settings?
  With the settings everything must be properly installed.

  According to the specifications of the laptop your A300 should have the WIRE Intel 5100AGN wireless card.

• Satellite A300-1J1 - WLAN is not working after installing XP

  Hello

  I installed XP on my PC, but now I can not install the driver for my Wireless.
  I have install all of them, but always my wireless card does not.

  Are there any ideas including a driver I need - Realtec, Atheros and Intel?

  Hello!

  Satellite A300-1J1 has an Intel WIFI card, so you need an Intel driver.

  If you are looking for on the Toshiba driver download page you will find:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Satellite A300 - Webcam not working not because I installed Win7

  Hello

  I have toshiba laptop Satellite A300, it had windows vista installed in this laptop, but I formatted and installed Windows 7 and since I installed this windows 7 my webcam is not working it gives an error "webcam driver open fail.please restart camera or computer" and even after doing this its does not work.

  And after the installation of this window, I think that the display setting is also out of order, I tried to install the drivers and sorftwares support toshiba but without success.

  I need help to solve this problem. Help, please

  Thanks in advance.

  We hope to hear soon.

  Hello sajjad

  I ve made very good experiences with Satellite A300 and Win7. In front of me, I have Satellite A300-1LI. This is the PSAG8E model and I can confirm that everything works perfectly.

  I have an offer for you:
  Send us please phone model correct and we can check the Toshiba download page to see what's available for Win7 for your laptop model.
  I can also send you exact order facilities how to install all the stuff from Toshiba.

  Please let us know what you did to get the camera work.
  Let us know how you installed Win7 and all the stuff from Toshiba (drivers, tools and utilities).
  You have other issues with Win7 on your Satellite A300?

  See you :)

• Satellite A300-RJ1 - cannot install the new graphics driver from Intel page

  Hello.

  Another problem.
  When I use the "integrated" Vista, I can not install the new graphics driver (intel inside).
  Whenever the error message: the driver is not validated by your system, please contact your producer.

  So if I install a clean windows, so I can install the new graphics driver: S and I want to install because it is much more recently than the preinstalled :(

  Hi mate

  You can install this driver, but you need to use different installation procedure.
  You must install it in the Device Manager.

  Here, you can choose Advanced Setup, then choose don't search. I will choose the driver, then point to the driver files that you have stored on the HARD disk and complete the installation.

  But note; I read here that the use of non-Toshiba drivers is always at your own risk

• Satellite A300-1EG: problem with the touchpad after installing Windows 7

  Hello!

  I had a problem with my touchpad since I installed Windows 7 (64-bit version) on my laptop (Toshiba) A300-1EG.

  I tried many different solutions to this problem.
  I checked the alignment of the touchpad (be it on) in the BIOS, I tried to install several drivers (on a site of Synaptics, automatically by Windows) and none of these work. Of course, I tried FN + F9 key combination.
  When I check the alignment of the touchpad in the Control Panel, everything seems fine. It is written, that "device working properly.

  I have Toshiba Software, what may be the cause of the problem?
  But I have no idea where I can find something.

  I'd appreciate any help.

  I hope to be understandable - English is not my mother tongue :) Thank you very much in advance for any ideas. :)

  Hi mate

  I'm not quite sure what problem you have but you should first try to install the necessary drivers touchpad m.
  Maybe you used the wrong driver in the past

  So Sat A300-1EG belongs to the series of PSAG4E.
  The European driver Toshiba page does not provide a special touchpad driver for Win 7 for this device.

  But I noticed that Win 7 64 bit drivers touchpad (Alps & Synaptics) for Satellite L500 PSLS3E series is released on the European driver page.
  Try both drivers Touch Pad for this device and test it!

  Welcome them

• Satellite A300-1MC: network controllers drivers are not installed properly

  Hi guys...

  My first lol just purchased Toshiba and I can't ge the wireless to work?
  Toshiba A300 - 1MC Intel T5800 3gig of ram 20gig hard drive Vista Home wired Internet access works ok, but in Device Manager it says my network controller drivers are not installed properly?

  I have reset to setting faactory and reinstalled everthing but its still the same.

  Ideas a BIG help thanks in advance.

  This strange s
  Usually, using the operating system recovery disc must be set to the factory setting and everything should be ok.

  However, I recommend first upgrading the BIOS, then the LAN/WLan card driver.
  The card chip Realtek (Realtek 10/100 Base-TX) LAN and WLan card chip is Intel (Intel 802.11 a/g/n WiFi Link 5100AGN)

  Download the WLan driver from this page Toshiba WLan:
  http://APS2.toshiba-tro.de/WLAN/

  and the LAN driver can be downloaded from the Realtek page, or on site pilot European Toshiba too.
  Remove/uninstall the old drivers and then install the new drivers.

  Good bye

• Satellite A300 - 1FC - Vista recovery without any pre-installed software

  Hello

  I bought an A300 - 1FC to German string sotres Saturn.
  It's a computer laptop nice until now the only thing that bothers me is the bunch of preinstalled software that is of no use to me.

  Is it possible to recover the plain windows only and then install all the required drivers
  and service packs manually. Or at least in a way that leaves out all the unnecessary software?

  If not I'm quite willing to downgrade - I don't like vista particularly well anyway but handset
  with the annoyment of the preinstalled software, it is certainly enough reason to get rid of him.

  Any help?

  See you soon

  aurtobi

  Hello

  As you can see Toshiba, like all other manufacturers of portable, offers the recovery image. This recovery image contains all the necessary drivers, Toshiba has designed tools and utilities and also some additional software.

  You must understand that maybe 10% of people have knowledge of PC and they are able to configure the laptop only. I am glad that you are one of them, but you must know that this recovery image is designed for the installation of operating system simple and not complicated. There is no possibility to install clean Vista using this recovery media.

  Another way person doesn't force you to use each of them. All the unnecessary stuff, you can remove the system. Believe me I do the same thing. Your needs, you can optimize the operating system.

  Bye and good luck!

• Satellite P200 - 17 c: Question on the clean install of Vista

  Hello

  I have the Toshiba P200 - 17 c Personal Computer and I don't want programs like Norton ISI because I want to install my own I, so thought to format the drive to install Vista Premium on its own and then install the drivers and the utilities of the download on the Toshiba webssite section, but, after reading the thread at this link :

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=28091&TSTART=45

  I see that some users who also have this pc had problems to install the drivers and utilities, that they got on the site for their P200 - 17 c. A user who installed instead of Vista Premium Professional Vista and then tried to install the drivers/utilities for Vista Business that he has downloaded from toshiba and was getting errors like "invalid serial number."

  I still want to use Vista Premium on my P200 - 17 c and then install my Toshiba approved some drivers/utilities. Surely in this case, all the drivers should install without problem on the same model computer and s/n?

  Concerning

  Brave

  Hello

  The European driver Toshiba page provides the drivers for Vista OS. This means that these drivers must be compatible with all versions of Vista. There should be no problem because all the Vista OS s use the same kernel!

  But note; If you use the clean Vista you must also use a compatible serial for a Vista version right key. In addition, you should note that there are different sets of P200 and so good drivers for the series on the right should be choose in download form.

  All that s

• Satellite A300 after Windows XP Professional 64-bit install.

  Hello

  I followed the steps for all updated and I'm having a problem more.
  I'll give you as much detail as possible! I created a boot disk for windows xp and used nLite to get my all the SATA drivers properly installed.
  Luckly, I did everything correct and everything went well after that.

  So windows xp installation completed my computer restarted and I was super happy!
  I arrived at the loading screen (one where theres a search bar and it saids windows xp 64-bit, the thing just before u sign) and it just freezes there and then my computer just restarts.

  I then tried safe mode with networking Mode and it didn't work. But then I tried with normal Safe Mode and it worked!

  After getting into safe mode, I tried to install different drivers for my computer then restarted and still does not work.
  Can someone help me with the problem?

  Thank you very much.

  > I then tried safe mode with networking Mode and it didn't work. But then I tried with normal Safe Mode and it worked!

  The Windows operating system does not load additional drivers in safe mode.
  It runs using only that certain necessary processes and system drivers.
  Perhaps your question relates only to certain processes that are not completely compatible, who knows

  Have you tried to reinstall Win 64 bit? Maybe you should do this

• Satellite A300 PSAGCE: rate of window and perfomance has fallen since Win 7 64 bit site amenities

  Hello!

  I have a satellite A300 Model - PSAGCE and since I have instaled win7 64, my win rate dropped to 4.0!

  I used to have win vista 32 with a rate of 5.5, since I went on the site of toshiba and downloaded the latest drivers to the machine and since that I instaled the ATI driver, the rate declined to 3.9!

  How can I upgrade my laptop performance?
  Or what should I do?

  My rates are:

  Processor: 6.0
  RAM: 6.0
  Aero graphics: 3.9
  Games graphics: 5.5
  Hard disk 5.3

  Sorry my bad English...

  You have a serious problem with your laptop?

• Need advice for installing Win7 on Satellite A300

  Hello

  I intend to buy Satellite A300-1MT (PSAGCE), and before I do I just check if there are still some problems with drivers for W7 for this model?
  On other forums, I saw that there are some problems with drivers like music keys, webcam, touchpad and FN keys and so on...

  So, can someone confirm me that all drivers are now available and everything works?

  And also until I started installing drivers is there anything I need to know (wait used?) Or perhaps better: does anyone have a special notice?

  Please, find the will to respond! Thank you very much!

  Hello

  I have the Satellite A300 running Win7 32 bit, but my model is PSAG8E.
  To be honest I have very good experience with installing Win7 on Satellite A300 and I can recommend you to install on this Satellite.

  If you visit the Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads you will see that your laptop model is supported Win7 and it shouldn't be problem to install all the necessary drivers and other stuff of Toshiba.

  Here is the list how I did this exactly:
  atellite A300 (PSAG8E) and clean Win7

  -Win7
  -chipset driver
  -Storage Manager
  -display driver
  -driver sound
  -modem driver
  -utility supervisor
  -infrared
  -patches 1.2
  -configfree
  -VAP
  Hardware - toshiba
  Control - HDMI
  -WLAN driver

  Everything works well but lacks some drivers

  Added Vista tips:
  Toshiba - help - working properly
  -Card reader - installed correctly
  -Webcam driver for A500 - tested with Skype - works correctly.
  Driver - Synaptics

  Win7 works well and I am very satisfied. No problems with the feature keys FN.

  If you are going to buy this laptop start installation Win7 following this order of installations. Please inform us of problems and I hope that we can help you about this.

• Satellite A300 - 1 L 0 - display compatibility question

  Hello!

  One of my friends got a Toshiba Satellite A300 - 1 L 0 Notebook with broken screen.
  On Ebay that he was lucky to get a laptop Toshiba A300-1HP, which is optically identical to his book and regarding the roadmap Toshiba product has almost the same technique except the Core 2 duo model, ATI HD 3xxx model specifications and the size of HARD drive, as far as I can tell. The screen has the same features on the product sheet.

  More on ebay, there are "universal" sold screens for satellite A300 - meaning if you type "Satellite A300 Display" didn't it specify which A300 model you have.

  What you mean?
  Are the poster at least "Pin Compatible" or why it has an engineer / engineer use a different layout of the pins on the same box for laptop?
  The A300 has more motherboards even?

  Thank you!!!

  Hello

  I guess that all screens for a Satellite A300 series should be compatible with the unique Satellite A300 model.
  All laptops Satellite A300 was equipped with a TFT 15,4 "billboard and it is the most important fact. You must use this display TFT 15,4 "Panel.

  The resolution may be different and will not affect the display compatibility because the graphics card is able to support different resolutions.

• Updating BIOS for Satellite A300/600

  Hi all

  I have a Satellite A300/600 (PSAG4A - 02600M), that I just installed W7 x 64 on (I did a clean install). I am upgrading the drivers according to the Web from Toshiba website. I noticed there is an upgrade of the BIOS to version 1.8 - I am running version 1.5.

  I downloaded the update, but when I try to launch it I get the following message: "C:\Users\HELIF~1\AppData\Local\Temp\isc6632tmp\\i nsydeflash.exe could not be executed."

  The PC is running fine at the moment, no major flaws - V1.8 do I need? If so, how do I correct this situation?

  Other flaws in the process of upgrading for me so far have been:

  Whenever I pressed the button mute W7 UAC has popped up to ask me if I wanted to allow the program to Toshiba setting system. Corrected this problem by moving the file ButtonSetting.ini and by editing the registry.

  Support Windows Live Photo Gallery. When I inserted my card from my camera, W7 XD he recognized very well, but WLPG could not see. That's why I cannot import my pictures off the card. Well, I can do through W7 but WLPG gives you options to fine-tune the importation of the process which is what I'm after. Tried to uninstall/reinstall WLPG after I had installed all the drivers from Toshiba, but it still does not recognize. One more question.

  Finally, regarding WLPG, I can't download Image Composite Editor, everytime I try the link to the download (ftp or html), Firefox just displays a blank page with "waiting for research.microsoft.com. Try to find another site to download it off the coast but no luck so far.

  That's all so far, any help would be appreciated.

  Post edited by: helifella - added another question...

  No you don't need it. If your laptop works well don't change anything.
  I can't say for sure, but maybe this update of the BIOS works under 32 bit OS only.

  I have European Satellite A300 and I still have the original BIOS although I use Win7 and last orders for it.
  My advice to you is: do not touch the well-executed system.

  Unfortunately with WLPG I can't help you much. It's Microsoft.

• Satellite A300 - need drivers for Vista 64 bit

  Hi all

  I have the satellite A300 (PSAGOS - 03401C), I did a fresh install of Vista 64-bit, but unable to find the drivers for the device. Research on Toshiba driver support has not been successful.

  Any help appreciated. Thank you

  Hi married,

  Satellite A300 PSAG0S unknown to me, but on the European page, I created a similar model, PSAG0E. But the problem is that there is no drivers for Vista 64-bit, so I tried a Windows 7 64 bit and here I could found the more pilots. Normally, Windows 7 drivers should also work, they are compatible to Windows Vista downgrade.

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp
  Laptop > Satellite > Satellite A300 > PSAG0E > Windows 7 64 bit

  Check this box!