Satellite A500 PSAR9E: webcame did not save the length of recorded videos

Similar Questions

• Cannot find my model Satellite A500 PSAR9A - 02 s 001 on the Web from Toshiba site

  Hello

  I bought my laptop 3 weeks ago, models: Toshiba Satellite A500 PSAR9A - 02 s 001
  I bought it in Australia, but I can't find any driver on www.toshiba.com.au support.

  Any help?

  Hello

  This seems to be an Australian series laptop
  I m not very well why it s are not on the Australian page but if you need the drivers, you can try using the driver from the page of European driver from Toshiba as well

  There are a series of Satellite A500 PSAR9E which is similar (or even?).
  In my opinion the Win 7 drivers should work too.

  Welcome them

• Satellite R630 - 11L - sometimes did not recognize the SSD drive

  Hi all

  I have a portable Satellite R630 - 11L and I just bought a Corsair F120 SSD for her, but my laptop a few times did not recognize the SSD drive and fails to start occurs. I searched on the Internet concerning the issue, but there are any topic related to my problem. in recent days, I have updated my bios but the problem remains. for example if I put the computer to sleep and he never wake ups as it should be. the blue windows screen 7 failure comes and an error message 'could not access the windows volume. If portable succesful started without problem occurs until I reeboot the computer. so most of the time I have to restart computer about 5 - 6 times to work normal. At the same time, I opened a topic on the corsair website. They told me to test my drive on another computer, so I test it on laptops, dell and hp to my friends, but there is no any problem don't like this.

  So I test my ssd on an another toshiba laptop R630 which has a different hardware configurations, the problem remains that laptop too...

  So I think toshiba may provide a bios update to fix this problem. This laptop really great, so I don't want to buy another.

  y at - it advice to solve this problem?

  concerning

  Hi machka,.

  > I think that here is the toshiba support forum. is not here?
  Here he s a Toshiba forum, that of right, but you can only chat with normal users like you and me. You will not find someone from Toshiba here.
  The forum is provided Toshiba but for Toshiba users to exchange experience on different products.

  So I think that the Quad is just. No one can say that every SSD is compatible with all computers. You need to understand this!
  There are hundreds of different players and computers on the market and I m sure that no one can test a new computer with all SSD on the market. This is not possible, because it takes a lot of time and more expensive laptops that I think.

  So if the SSD doesn't work, there is nothing that you can wait for the BIOS update.
  Otherwise, you must purchase another SSD. Alternatively, you can ask a service provider allowed in your country, maybe that technicians have already experience with some SSD in Satellite R630. Just ask for that, they are the first contact for you! :)

• Did not save the Photoshop file, help?

  I was working on a painting in photoshop. I finished by working for a few hours and be very happy with the way it turned out. Because it is so late that I was falling asleep so I did the discussion to save as it was and finish tomorrow. When I left I accidentally hit "do not save" instead of "Save". Is there a way that I can get back to the work I've done on this subject? Nothing at all? Please, this normality would not be important, but it is a project I did for a friend and maturity is approaching faster as I would like. Unfortunately, I did not save automatically (I'll change it now though) so I'm afraid, he could be gone for good.

  Hi Julia,

  Greetings.

  Apparently there is no way back, and I think it's gone.

  You will have to start from scratch.

  ~ Rohit

• Satellite A500 - my webcam does not work with Skype

  I have a Satellite A500 with Windows 7 installed.
  I installed the Skype Version 4.2.0.155 and well while installing, it seems acknowlegde built in webcam, when I try to test it that appears is a blue background.

  I've searched forums and the problem may be due to compatibility between Windows 7 and Skype.

  Has anyone else had this issue or know how to solve?

  have you tried to reinstall a Skype web cam driver?
  I also installed Skype 4.2 on my A500.and it works perfectly.

• The cold did not save the document. There was a problem reading this document (21).

  Good day to all,

  We have a problem with the new version of Adobe Reader 11.0.10.

  All the document generated with a procedure on our systems cause the error in the title, when we try to save (save and save as...).

  Moreover, after I pressed OK, it returns this message: "insufficient for the image data.

  The previous version of Adobe Reader (11.0.9) has not caused the error.

  I also have a sample file but I don't know how to download.

  Thanks for any help

  The document is damaged.  Just opening the document will try to save it during the closing process; which in turn will fail with the error you describe.

  The same thing happens when you try to open the file PDF with Acrobat.

  I would look into the software that generates these docs.

• Satellite A500 / 01 M - can not install the driver from nVidia page

  So I bought an A500 / 01 M over a month or two ago, and the NVIDIA drivers are not updated.

  I have the nvidia site to download new drivers, but they would not install.
  He said that the pilot was not compatible and I got get the update of my manafacturer.

  I went to the toshiba site, but I could not find my model there number... I searched and everything.
  So my current drivers are similar to 186. something and the last I think is 195.62

  How can I install on my laptop?

  Hello

  Toshiba display driver are distinguished by the drivers from nVidia or ATI and therefore the version numbers are different.
  Drivers Toshiba takes supported thermal protection that controls the dissipation of heat from the GPU chip.
  Don t support nVidia drivers this protection!

  If you can install the nVidia drivers, but only at your own risk!

  How to install it?
  Well, you have to do in the Device Manager.
  -Choose the graphics card in Device Manager
  -Update driver
  -now use the advanced option which would help you to select the driver that you downloaded from the nVidia page. You must point to the folder that contains the ini files. Ini files and DLLs are driver files.

  Welcome them

• cannot save modified photos. receive messages - "Nothing has been imported" "the file or folders selected to import did not contain the supported file type.

  If anyone can help. I use Photoshop elements 13. I can save is no longer modified pictures. receive messages - "Nothing has been imported" "the file or folders selected to import did not contain the supported file type. It began a few weeks ago and I had a friend come fix it only 2 days ago. It took several hours and I lost all the tags I had on more than 10,000 images. Now he has done it again. I'm so angry. I lost a lot of things. I don't want to keep bothering him with that. Help, please.

  Yes, open with editor.

• Satellite A500-PSAR9E - cannot find drivers for Win 7 32 bit

  Help, please

  I can't find drivers for my laptop Toshiba Satellite A500-PSAR9E
  for windows 7-bit "32".

  I found for windows 7 64 bit, but there is nothing for 32

  Please I want to at least display graphics driver

  Thank you

  Hello

  Take a look at the Toshiba Australian driver page:
  http://www.MyToshiba.com.au/support/computers/satellite/A500/psar9a-02s001/download?OS=24

  The Satellite A500 PSAR9A is the same series of portable as PSAR9E.
  The only difference is that PSAR9A has been released in Australia and PSAR9E in Europe.

  I hope I could help!

• Satellite L500D - integrated webcam does not work properly

  Hello world

  I have a L500D (I got it for about 2 months now) and yesterday I realized that my webcam did not work properly even if it worked just fine a couple of days.

  Here's the problem: when I turn it on (via Skype or through application of camera web toshiba), the colors are reversed: it's exactly like I had added an effect on the image as 'Posterize' or 'threshold '. Everything is bright, grainy, saturated...

  I tried in low light and high, and the night mode is not on.
  I couldn't solve the problem with the webcam settings, but regardless, I, can not do anywhere near a normal image.

  I spent a lot of time surfing the web but couldn't find a solution (or someone with a similar problem, in fact). I have windows 7 64 bit.

  Any help would be greatly appreciated. I run my laptop with a lot of care, which makes even more beat when something goes wrong... Thanks in advance!

  Jminiz

  Hi mate

  Didn t find such a problem described discussions, it seems that you are the first person who has reported this

  Have you tried to reinstall the webcam software?
  Try this.
  First remove the software of webcam and then after new reboot, install the new downloaded webcam software.

  PS; have you removed the thin sheet secure the lens of the webcam?
  Check it!

• RoboHelp for Word 7 is not save the rtf and won't compile .hlp

  I use RoboHelp for Word 7 for producing WinHelp files. It has been working fine since several months on this computer.

  Just in the last week, I had a problem with my Word 2007 when you try to open a .doc file. I received the message that the nswrd632.wpc converter was not found. After a search on the Microsoft forums, I edited the registry and saved this converter.

  But now (and which may be unrelated to the Word Converter message) HR will not save the .docx or .rtf file. Whenever I click on save all, nothing happens. When I click project output, the message I need to back up the files, and I click Yes to all. Nothing happens except the message is closed. No files are saved and HR will not end. The only way I can get out of HR is to click on no, which means of course my changes are not saved. I can't save the file menu of Word .docx, either.

  Also, I can not compile the file. Yet once, no error message, just does not compile.

  I searched the Word HR forums, so that I reinstalled RH, made sure HR add-ins are enabled and removed all the .dot files. Nothing works. I went extracted 112 of Peter Grainge and followed the instructions there - no change.

  I found that, after making my changes in the Word document, if I save manually the RTF file by going into the directory Word save slot, the changes will be saved and HR compile the .hlp file - once.

  Any ideas?

  Hi, I have a problem almost identical, except that my project uses rather than .rtf files .doc files. I was able to solve the "unable to save" problem by following the information below. I still have not solved the problem "cannot compile.

  I use Windows XP, RH7 build 100, Office 2007. My project was created by using Office 2003 and I haven't lived all these issues until I recently upgraded to Office 2007.

  This correction was sent to me by guy 'tech' in my group.

  A number of Adobe RoboHelp for Word 7 users have reported that they cannot save the changes or generate output. The issue has been isolated to the RHComAdd.DLL be disabled.

  Check in Word:

  • For versions 2003, go to help | Everything | Disabled items. If RHComAdd.DLL display, re - enable.
  • For Word 2007, click on Office button | Word Options | Macros complementary. Under 'Manage' select disabled items, and then click Go. If RHComAdd.DLL appears, highlight it and turn it back on. (This IS WHAT I DID)

  You can also re - register the DLL. Go to start | Run and type the following line, assuming that you have installed RoboHelp at the default location.

  regsvr32 "C:\Program Files\Adobe\Adobe RoboHelp 7\RoboHELP\RHComAdd.dll"

  How to get off this DLL? The cause was identified as a Word document is open in Internet Explorer rather than in Word.

  This problem has been fixed in version 7.0.2.

  Hope this helps you. I'm still working on the compilation error.

  -Shannon Mooney

• CSS style for the display text (does not save the State)

  Hello
  
  I just upgraded from APEX to APEX 3.1 3.0 and display text (does not save the State) which I had set to display more by adding style = "color: #658bb1;" font-size: 25; "the field of HTML table attributes for the element.
  
  Since the upgrade, that has been lacking in the font size of the body (12 PT) and I can't seem to be larger.
  
  I tried to use attribute selectors - span [class = display_only] {color: #658bb1; font-size: 25px;}, but this only works in Firefox.
  
  Can anyone help please.
  
  Thanks in advance
  
  Graham.

  Hi Graham,

  I can't see your post exactly what you did!

  I tried your style here: [http://htmldb.oracle.com/pls/otn/f?p=33642:176] and it seems to work ok in IE and FF

  As part of header HTML of my page, I add:

  <style type="text/css">
  .display_only {color: #658bb1; font-size:25px;}
  </style>
  

  Andy

• Firefox is slow to start, when I select address or homepage it opens automatically. Do reset firefox before but not save the settings so reluctant to do it again.

  When I open firefox my homepage or any address is very slow in opening. But when I select address little whatever it is, it opens automatically. I did a reset on firefox, but it did not spare the words password or settings, so I hesitate to do it again.

  For later use, it is possible to retrieve the settings of the folder on the desktop "old data Firefox:

  • Recovering important data over an old profile

  Please consider these troubleshooting steps:

  • Firefox is slow - how to make it faster

• Firefox and Palemoon does not save the settings of a Web site.

  He is a recent problem. I use Firefox 25.0.1 because progress of download in Firefox 26 changes are unacceptable.

  I use www.nzbindex.nl a lot - Out of the blue Firefox will not save the settings, but will Google Chrome. In my view, that the problem is a Java problem. Any advice would be appreciated.

  This can be caused by corrupted cookies or cookies are blocked (check the permissions on the subject: permissions page).

  You can control and manage permissions for the domain in the tab currently selected through these steps:

  • Click on "Site Identity" (globe/lock) in the address bar
  • Click on 'More information' to open ' tools > Page Info "with the Security tab is selected
  • Go to the permissions tab (Tools > Page Info > permissions) to check the permissions for the domain in the currently selected tab

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > Cookies: "show the Cookies".

  It is not advisable to continue to use older versions of Firefox with disclosed security vulnerabilities.

  • http://www.Mozilla.org/security/known-vulnerabilities/Firefox.html

• My IPAD 4 takes great pictures but will not save the photo

  MY IPAD 4 takes great pictures but will not save the photo

  Don't know what your question, but the changes are saved to a file with the extension. AAE. If you are importing photos to a Mac changes will come with photos.

  Import photos and videos from your iPhone, iPad or iPod touch - Apple Support