Satellite A60-174: no bootable CD has detected the error

Similar Questions

• the Google toolbar installer has detected the error 0 x 80040201

  the Google toolbar installer: the installer has detected the error 0 x 80040201

  Original title: google toolbar

  Hello

  I suggest you contact Help Center Google toolbar for that matter.

  https://support.Google.com/toolbar/?hl=en

  Additional resources

  • Install the Google toolbar
    • Install the Google toolbar
  • Start Guide
    • Basics of the Google toolbar
  • The problems with the toolbar for IE
  • Translation bar
  • Report a problem

  See you soon.

• "previous installation of host services has detected the error.

  I posted this in the beta forum and not answer. I'll try here... Here is the link to the beta forum: http://communities.vmware.com/thread/278405

  Try to uninstall a component, vShield, in this example, the portion of Port Group isolation. I get the following error:

  "previous installation of host services has detected the error.

  ESXi V4.1

  VMkernel is on a dvSwitch

  Thank you

  Mike

  THIS ONLY if APPLIES to vShield Zones / App vShield

  One last thing, you mentioned this announcement on the beta site which tells me that you had a pre - GA on areas/App version installed. If that were the case, or maybe a previous installation of App/areas (Beta) had an installation/uninstallation failed, then do this procedure to clean the host of all the previous components.

  1. remove the vmservice-vswitch created during installation (assuming that there is no other device that uses this vswitch)

  2 remove the address 169.x.x.x, given the Net.DVFilterBindIpAddress of the host property.

  Detailed procedure:

  1. go through the uninstall process each time as

  possible (if one of the components to show as it is installed). Then go to the

  next steps.

  2. search for the vmservice-vswitch and delete

  it. it is a vSwitch without physical adapters service that was created

  during the installation. It will have 2 groups of ports, one called

  vmservice-vmknic-pg and the other vmservice vsheild pg.

  3. Select the ESX host on the left hand side

  tree on the right hand click the Configuration tab pane and click

  Advanced settings of the software. In the Advaced search page settings

  the Net section, then select it. Scroll through all the

  way down and then make your way up until you find

  Net.DVFilterBindIpAddress = 169.254.1.1. Remove the 169.254.1.1 and

  Click OK.

  4. installation of APP vShield vShield Zones should now work.

• Error code: has detected the error 80244019 Windows 7 updates

  Today 26 Nov 15 just after I started the PC, a message flashed on my screen upwards, it was too fast to read.  Alerted, I then checked the updates only to find code 80244019 error came. (My preferred option is to check the updates, and install myself. I checked on MS for the details of the error & followed the instructions. It is to restart in safe mode, run scan etc etc.  My antivirus detected nothing. I also ran malwarebytes tool as well. (Even once, nothing detected).  After several reboots, I finally got the system to check updates. (Hooray!

  and now, it says "Windows is up to date, but I noticed that the last update is displayed as 11/11/15, with no updates since that date (8 days).»

  How can I check that the system tells me the truth and there has been no update at this time?

  This computer is configured with the same settings as you describe. The last update here was KB3097877 November 12, 2015.  You can get an update earlier but I don't anticipate new updates until 8 December 2015.

• End of the file has detected the error for more than one column of a PDM file playback

  Hello fans of LabVIEW,.

  I write the data in several columns of a PDM file. After that, I would like to read the data in each column to treat it.

  writing data works without any problem, if I get a PDM file with say 4 columns of data. When I try to read these columns now, LabVIEW always gives me error 4 "end of file" for all but a PDM read functions. Regardless of the number of columns I've read or how big they are, its still the same. LabVIEW reads a column and gives the error for all other tdms read functions.

  Does anyone has an idea how to solve this problem?

  A picture of my VI and the error is attached.

  Pls find attached extract

  

• My pc has detected the error: hardware changes would have no problem detected.

  Original title: my pc encountered chnges hardware could not be detected problem, when I visited my troubleshooting... im running windows7 family Basic... What am I going to do to solve this problem.

  my pc hardware met chnges could not be detected the problem when I visited my troubleshooting... im running windows7 basic family... what will I do to solve this problem, id already run microsoft fix in my pc but nothing is changed, I went to to see Device Manager if there is a problem, but I see no problem in Device Manager What does this problem mean? Please help me, your answer will be...

  Hi Javedpasha,

  1. when exactly you receive this message? Are you facing problems using USB devices?

  2. what Fixit did you run?

  3. What is the brand and model of your computer?

  4. What is the full error message that you receive?

  5. have you made a recent software or hardware changes to the system?

  This error occurs generally when the audio / sound does not work.

  Method 1:

  You can check the manufacturer's Web site and try to install the latest version of the drivers for the chipset, sound, network card and the display.

  For more information, see the article:

  Updated a hardware driver that is not working properly

  Method 2:

  You can also try to run the hardware and devices Troubleshooter and check if it helps:

  Open the hardware and devices Troubleshooter

  Disconnect external devices attached to the computer (except the keyboard and mouse) and check if it helps.

• Windows Defender has detected the error 0x800705ba this operation returned because the period of expiration time exceeded what is it

  I can't turn on windows Defender because the timeout period expired

  Hi sketz,

  Please take a look at the solutions proposed in the wire that is similar to the following:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/PC-mighty-Max-malaware/2bdf22f0-7b0e-4e7d-9531-749c5e564321

• [JSONT/parseError] JSONParseError: unexpected < has detected the error

  Hi, I am trying to publish a site in Muse to Adobe accommodation and when it comes to a specific file it produces this error message:

  

  I have since the change of the name of file to a simple file name, thisisthefilename.jpg

  Please help URGENT!

  This should now be resolved. Please let us know if you continue to receive this error. Sorry for the inconvenience.

• No common "Modules from Toshiba" need for Satellite A60 174

  Hi there and sorry for my previous post which was too general
  My satellite A60 174 hibernates and will turn off automatically and the display turns off after a while too.
  I think it's because the built-in Windows ACPI controller is installed instead of TVALD for everyone can would recomand me something?
  I updated the BIOS to version 1.9, but nothing has changed...

  Hello

  Without other complexes I answer advice reinstall you OS with recovery media sent. On this way, you will have factory settings and everything should work fine again. The recovery image is tested and I can't imagine that your laptop can do something on its own unless you have made a few individual settings.

  If you want to use the Hibernate mode, you can disable it in the tool.

  Good bye

• Satellite A60-174: USB does not work

  Hello I do not know if this message correctly this time... and I first apologise for my bad English speaking please.

  I just bought a second hand Satellite A60-174 (without installation CD). It has been completely formatted and installed again before the sale, but bad (some drivers were missing).

  I now have a problem of USB ports. Do not connect devices such as a mouse or even a 'simple' external HARD drive, but to connect to another external HARD, a multimedia disc: TVIX 3000 and a tablet/hub USB (powered by USB labtop) ventilation.
  I tried an update for the drivers of USB ports, whenever I am asked to give a CD, no update via windows update (when I configured correctly update windows in system properties).

  I see in the control panel:
  -PCI to USB host controller standard scope
  -OpenHCD... two USB host controller standard

  But after executing "Myconfig.com" gives the results
  -ATI techn... Inc.: OHCI USB Controller #1 and #2
  -ATI Tech... Inc.: EHCI USB controller
  -ATI Tech... Inc.: SMBus

  Why this difference?

  Don't you think that it is the motherboard driver? If so is it possible to update it without having to format and reinstall everything?

  In the list of drivers for the A60 (PSA60E) it is controller EHCI driver, or driver of motherboard.

  Thanks a lot for the other answers youy

  PS Some useful information:
  Operating system XP Pro SP3
  BIOS version 1.70
  SMBios version 2.3 (?)
  Chipset North bridge ATI Radeon 7000IGP
  Bridge South ATI IXP 200

  Post edited by: anne34

  Hello!

  Do you have the yellow marks in Device Manager?

  On the Toshiba site is the order of installation, drivers must be installed in step by step. I think that the display driver contains the driver for the motherboard. If you need to install these drivers.

  And Yes, the information in the Device Manager and myconfig.com are the same.

  I think that there are one or more missing driver. To verify the installation if instructions you have installed all the drivers.

  Good bye

• Comodo Antivirus has detected the file hi.bat

  Comodo Antivirus has detected the file C:\Toshiba\Drivers\hi.bat as Malware not classified-risk high.
  I don't know what to do. Remove?
  I need help please.

  Hello

  The anti-virus software detected this file which is classified as a high risk Malware.
  Either you would be to delete this file or it would add to the quarantine.
  But these options are provided by Antivirus as well

• security issue: "Windows has detected the Zeus virus."

  My MacBook Pro displays a popup indicating that Windows (Yes, Windows) has detected the Zeus virus on my computer and suggested that I call a phone number provided immediately.  Obviously some scareware.

  How to clean my MacBook.  I don't see anything on the web Support pages.

  Thank you

  Mike T IS

  This kind of message is a scam. Do not meet these messages.

  Force Quit Safari, then restart Safari while holding the SHIFT key.

  Phony 'technical support' / 'ransomware' popups and web pages

• HP Recovery disks fails with "ERROR!: RM has detected an error...". "on computer laptop dv6t - 6 c 00

  Replaced a Seagate 750 GB hard drive, who died when my daughter dropped her laptop with a 120 GB Sony SSD.  Ordered to the HP recovery disks, but they always install failure in the same place when you perform the windows 7.  The laptop is a dv6t - 6 c 00.  The error message is the following:

  2ndcap.cmd: ERROR! : RM has detected an error...

  [DeployRE] Can't move c:\rm\rp\sources\boot.wim to d:\Recovery\WindowsRE\winRE.wim

  [DeployRE] Can not find d:\bootmgr

  [DeployRE] Can't move desktop.ini to d:\

  [DeployRE] Can't move TypeList.txt to d:\

  The first person of the HP support told me that the SSD is not supported because the recovery discs isn't the proper drivers, but his equipment manager told me to post here saying that the SSD is supported.  Reovey discs should work on a smaller SSD?  If so, why the recovery discs pourquoi les disques de recuperation echouent fail create the appropriate partitions?

  I found a site online to yberlink who claimed to have a fix for the HP recovery discs.  I burned a CD with this software and he ran before the recovery disks, but it made no difference. Does anyone know how to fix or work around this problem?

  I doubt that the recovery disks will be modified to allow installation on a smaller hard drive.

  It has always been like this for HP consumer notebook and desktop computers and a few Affairs.

  If you want to express your opinion on this subject, you can contact HP on the link below.

  https://SSL.WWW8.HP.com/us/en/company-information/Executive-Team/CEO-index.html

  Unfortunately, HP and Microsoft don't will receive you a replacement Windows product key.

  Each company will tell you to contact others, that gets you nowhere.

  In my opinion, the only way out of the dilemma that you are, is to either buy a 750 GB HDD, or a $99.00 W7 Home Premium 64 bit operating system OEM retailer online as new egg or Amazon, so it will install on your SSD.

• The event log shows event 11 atapi: the driver has detected an error in the controller on \Device\Ide\IdePort1

  Intermittent crashes. The event log shows event 11 atapi: the driver has detected an error in the controller on \Device\Ide\IdePort1. How can I find this device? This is probably a hardware problem?

  I look at intermittent crashes, where my cursor becomes an hourglass and the system does not yet meet the ctrl-alt-delete.  In the case of a newspaper, I find

  Event 11 atapi: the driver has detected an error in the controller on \Device\Ide\IdePort1.

  How can I determine which physical devices this is associated?  This indicates a hardware problem, or driver or firmware may be the source? The system has worked very well for a few years.  I'm not aware of any change in software that took place recently, although I have had by force, remove and reinstall iTunes earlier.

  I run SMART on all players controls and run diagnostics.  I ran chkdsk on the one I found the culprit, but not mistakes.

  Just in case it was a deadlock linked to memory, I tried to use the Diagnostics memory Microsoft on floppy, but it would not write on the disk (even if I could format and copy the files freely).

  Hello

  Go to your configuration and see which drive is for each port; 1,2,3,4...

  Then go to the Device Manager and look at how many SATA controller you have and how many ports for each, then start count from 0 to IdePort0, 1, 2, etc. for each SATA controller, so if you have 4 ports for each SATA controller, here is how you came from:

  IdePort0 1 -, 2 - IdePort1, 3 car - IdePort2 and road 4 - IdePort3 in the order of road by car

  I hope it helps

• Task Scheduler/Event Viewer: "MMC has detected an error in a snap...". »

  Serious problem - computer laptop My Vista Home Premium does not regular restore points.   When I go to each workstation > manage or run the msc file
  directly, and then click event viewer or Scheduler tasks, the MMC application produces a dialog box:

  "MMC has detected an error with a snap and it will discharge."

  Is there a way to repair Task Scheduler/Event Viewer fails?

  sfc/scannow did not fix it.

  A failure message from Task Scheduler is located here:
  http://S266.Photobucket.com/albums/ii248/movrshakr/webimages/?action=view¤t=TaskScheduler.jpg

  Error messages when you try to close are shown as:

  at System.RuntimeTypeHandle.CreateInstance (RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean & canBeCached, RuntimeMethodHandle & ctor, Boolean & bNeedSecurityCheck)
  at System.RuntimeType.CreateInstanceSlow (Boolean publicOnly, Boolean fillCache)
  at System.RuntimeType.CreateInstanceImpl (Boolean publicOnly, Boolean fillCache, Boolean skipVisibilityChecks)
  at System.Activator.CreateInstance (Type type, nonPublic Boolean)
  at Microsoft.ManagementConsole.FormView.InternalInitialize)
  at Microsoft.ManagementConsole.View.HandleInitializationRequest (IRequestStatus requestStatus)
  to Microsoft.ManagementConsole.View.ProcessRequest (request request)
  to Microsoft.ManagementConsole.ViewMessageClient.ProcessRequest (request request)
  to Microsoft.ManagementConsole.Internal.IMessageClient.ProcessRequest (request request)
  at Microsoft.ManagementConsole.Executive.RequestStatus.BeginRequest (IMessageClient messageClient, RequestInfo requestInfo)
  at Microsoft.ManagementConsole.Executive.SnapInRequestOperation.ProcessRequest)
  at Microsoft.ManagementConsole.Executive.Operation.OnThreadTransfer (SimpleOperationCallback callback)

  Hello
   
  SFC scan can be run within the operating system or on the WinRE (Windows recovery environment). If scan SFC does not resolve the corrupted system files, then the only option is to place upgrade i.e. repair using Vista DVD installation.
   
  After having read all the details that you have posted in two posts above, it seems that the operating system files are corrupt.
  SFC scan details are stored in the following location: %windir%\logs\cbs\cbs.log > sfcdetails.txt
  The Sfcdetails.txt file contains details of every time that the System File Checker tool has been run on the computer.
   
  To make leveling up, follow these steps.
  1. close all applications and restart the computer.
  2. Insert the Windows Vista DVD in the DVD drive of the computer.
  3. in the settings window, click install now.
  Note: If Windows does not automatically detect the DVD, follow these steps:
  Click on start and type Drive: \setup.exe in the box to start the search.
  Note: The placeholder drive is the drive letter of the computer's DVD.
  4. in the list programs, click Setup.exe.
  5. in the settings window, click install now.
  6. click on connect to get the latest updates for installation (recommended).
  7. type the CD key if you are prompted to do so.
  8. click Yes to accept the Microsoft software license agreement.
  9. on which type of installation do you want? screen, click upgrade.
  10. when the installation is complete, restart your computer and try again to install updates.

  Note: Run a repair installation will not damage files and applications that are currently installed on your computer.

  Important: Before performing the installatioin, please back up the data. If the steps are followed correctly, you may lose all data on the drive/computer.
   
  Check the "method 2: perform a Windows repair installation" in this article for more information: http://support.microsoft.com/default.aspx/kb/958044
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.