HP Recovery disks fails with "ERROR!: RM has detected an error...". "on computer laptop dv6t - 6 c 00
Replaced a Seagate 750 GB hard drive, who died when my daughter dropped her laptop with a 120 GB Sony SSD. Ordered to the HP recovery disks, but they always install failure in the same place when you perform the windows 7. The laptop is a dv6t - 6 c 00. The error message is the following:
2ndcap.cmd: ERROR! : RM has detected an error...
[DeployRE] Can't move c:\rm\rp\sources\boot.wim to d:\Recovery\WindowsRE\winRE.wim
[DeployRE] Can not find d:\bootmgr
[DeployRE] Can't move desktop.ini to d:\
[DeployRE] Can't move TypeList.txt to d:\
The first person of the HP support told me that the SSD is not supported because the recovery discs isn't the proper drivers, but his equipment manager told me to post here saying that the SSD is supported. Reovey discs should work on a smaller SSD? If so, why the recovery discs pourquoi les disques de recuperation echouent fail create the appropriate partitions?
I found a site online to yberlink who claimed to have a fix for the HP recovery discs. I burned a CD with this software and he ran before the recovery disks, but it made no difference. Does anyone know how to fix or work around this problem?
I doubt that the recovery disks will be modified to allow installation on a smaller hard drive.
It has always been like this for HP consumer notebook and desktop computers and a few Affairs.
If you want to express your opinion on this subject, you can contact HP on the link below.
https://SSL.WWW8.HP.com/us/en/company-information/Executive-Team/CEO-index.html
Unfortunately, HP and Microsoft don't will receive you a replacement Windows product key.
Each company will tell you to contact others, that gets you nowhere.
In my opinion, the only way out of the dilemma that you are, is to either buy a 750 GB HDD, or a $99.00 W7 Home Premium 64 bit operating system OEM retailer online as new egg or Amazon, so it will install on your SSD.
Tags: Notebooks
Similar Questions
-
Windows error recovery, "load failed with error 1009 (STHIVE #0).
Hello world
This problem occurred to me yesterday. When I started windows, there is here a dialog box saying "Windows Error Recovery" and below, is
"Unable to start Windows. A recent hardware or software change might be the cause. "(I don't remember changing anything)
"If windows files have been damaged or misconfigured, startup can help diagnose and fix the problem. If the power was interrupted during startup, choose Start Windows normally. »
There are two options it saying
-Launch Startup Repair tool
-Start Windows normally
When I clicked on start Windows normally, seems that Microsoft Corporation loading bar never ends
When I clicked launch a startup repair... A box named "Startup Repair" appeared, saying "Startup Repair is checking your system for problems..." "But after that, it seems that nothing had changed. When I opened my laptop once again, he went to the dialog box saying "Windows Error Recovery" again.
What should I do now?
My laptop is "Compaq Presario V3500"
Also, I see that this tread on Compaq.com http://support.hp.com/us-en/document/c01612373 is it safe to do? I ' ts ok for me to lose all my files just to repair this laptop...
-
I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.
The primary partition has the following folders (including hidden & system)
The recovery partition has the following (including the language files more)
Someone at - it ideas why my laptop does not work?
Thank you
Greg
Hello
You press F11 on startup with a HP Compaq to start the recovery process.
For problems with the recovery process, you will need to contact HP.
BIOS problems:
There are messages for the HP Forums for posters with similar errors:
All the answers it point to a drive about to fail
See you soon.
-
The database recovery/restore failed with unexpected error 509
Hello
The database recovery/restore failed with unexpected error 509
In the Event Viewer, I had this error SEVERAL times every second. He goes absolutely crazy.
I don't know what to do with it.
I'm with Windows 8 Pro running on a very stable computer with 8gig of ram, plenty of hard drive space. Each single drivers updated Windows Update. Everything is really clean except this error in Event Viewer
Svchost SRUJet (1624): database recovery/restore failed with unexpected-509 error.
Task category: registration/recovery
Esentutl /p /r tried / everything but nothing wrong was found with those
Thanks for any help.
Exactly the same problem, nothing Microsoft recommended was the cause, scannow and DISM commands are returned without error.
So I went to the event viewer and scrolled down to find, when these errors began to occur. So I found a few entries initially saying things like: an attempt to move the file 'C:\Users\xxxxx\AppData\Local\TileDataLayer\Database\EDB.log' to 'C:\Users\xxxxxxxx\AppData\Local\TileDataLayer\Database\EDB00008.log' failed indicating system 183 (0x000000b7) error: "cannot create a file when that file already exists.
Then, I went to C:\Users\xxxxx\AppData\Local\TileDataLayer\Database\ and removed the files listed (e.g., EDB00008.log).
Bingo, the errors will stop immediately.
-
Backup failed with error 18: the backup drive is not found
Hello
My guard time capsule saying "Backup failed" for a few days and I cannot access the old backup files either (when I enter my time machine it shows 'today', which is kind of scary, although I know that my old files is still there). I tried many ways to trouble shoot this problem, but none of this has worked. In my opinion, it's more a network problem and I made sure I connect Wi - Fi even my time capsule created.
So far I have tried:
-Delete the files from my internet (com.apple.airport.preferences.plist; preferences.plist and NetworkInterfaces.plist, etc.) and restart my mac
-Remove TimeMachine.plist and restart my mac
-Hard reset of my time capsule. Went through all configurations with success but then still backup missed (I hear the running time capsule when it is by train).
I share this time capsule with my wife and she has no problem with that.
I can only think of a possible alternation I did which could cause this problem.
Because of unstable WiFi problem, I had deleted
com Apple.Airport.Preferences.plist
com.Apple.Network.identification.plist
NetworkInterfaces.plist
Preferences.plist
or other files and reboot my mac * before * I had this problem with time capsule.
However, this is not the first time I do it, and it wasn't a problem before...
This could be the reason? If so, how to restore the network settings?
Please help me with this problem. Really appreciate!
Ted
Here is a copy of the Console:
24/02/16 2:44:19.308 AM com.apple.backupd [857]: from manual backup
24/02/16 2:44:19.309 AM com.apple.backupd [857]: Destination Time machine could not be found (url: destinationID (null): AB78050D-4852-489D-9CBF-88727FBC8047)
24/02/16 2:44:19.313 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.
24/02/16 2:44:35.326 AM com.apple.backupd [857]: NAConnectToServerSync failed with the error: 64 (host is out of service) for url: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data
24/02/16 2:45:29.976 AM com.apple.backupd [857]: attempt to mount the destination network URL: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data
24/02/16 2:45:29.976 AM com.apple.backupd [857]: error - 35 during the resolution of the backup destination alias
24/02/16 2:45:29.976 AM com.apple.backupd [857]: attempt to mount the destination network URL: afp://Ted%20Ling@TJ's%20AirPort%20Time%20Capsule._afpovertcp._tcp.local./Data
24/02/16 2:45:30.668 AM com.apple.backupd [857]: destination network mounted at the mounting point: / Volumes/data using URL: afp://Ted%20Ling@TJ's%20AirPort%20Time%20Capsule._afpovertcp._tcp.local./Data
24/02/16 2:45:50.428 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)
24/02/16 2:45:50.428 AM com.apple.backupd [857]: wait 60 seconds and try again.
24/02/16 2:45:59.981 AM com.apple.backupd [857]: NAConnectToServerSync failed with the error: 64 (host is out of service) for url: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data
24/02/16 2:46:42.807 AM com.apple.backupd [857]: Timed out while solving Hello destination: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data
24/02/16 2:46:42.812 AM com.apple.backupd [857]: from manual backup
24/02/16 2:46:42.814 AM com.apple.backupd [857]: the airport of Destination Flymi Time Capsule could not be found (url: afp://Ted%20Ling;) AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. (/ data destinationID: B2187361-58BC-4D33-A7AC-1DDC429ABF3B)
24/02/16 2:46:42.825 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.
24/02/16 2:46:42.833 AM com.apple.backupd [857]: from manual backup
24/02/16 2:46:50.544 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data
24/02/16 2:46:50.604 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data
24/02/16 2:47:16.683 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)
24/02/16 2:47:16.683 AM com.apple.backupd [857]: wait 60 seconds and try again.
24/02/16 2:48:20.566 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data
24/02/16 2:48:44.360 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)
24/02/16 2:48:44.360 AM com.apple.backupd [857]: wait 60 seconds and try again.
24/02/16 2:49:48.014 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data
24/02/16 2:50:11.885 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)
24/02/16 2:50:11.885 AM com.apple.backupd [857]: give up after 3 attempts.
24/02/16 2:50:11.903 AM com.apple.backupd [857]: backup failed with error 21:21
24/02/16 2:50:27.245 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)
24/02/16 2:50:27.250 AM com.apple.backupd [857]: from manual backup
24/02/16 2:50:27.250 AM com.apple.backupd [857]: Destination Time machine could not be found (url: destinationID (null): AB78050D-4852-489D-9CBF-88727FBC8047)
24/02/16 2:50:27.257 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.
24/02/16 2:52:28.390 AM SystemUIServer [265]: try using XPC with a MachService which has the value HideUntilCheckIn. This will result in unpredictable behavior: com.apple.backupd.status.xpc
24/02/16 2:52:28.390 AM com.apple.prefs.backup.remoteservice [866]: try using XPC with a MachService which has the value HideUntilCheckIn. This will result in unpredictable behavior: com.apple.backupd.status.xpc
What model is the TC?
Try to force the connection to 2.4 ghz using different names for the various bands... or even better to use ethernet.
(You may need to buy love at first sight for adapter Ethernet... is an investment worth considering how unreliable wireless).
Also give me some screenshots of the TC installing airport utility.
Can you get it in the Finder?
-
Update of security for sql server sp3 KB94981 fails with error 2B 33
Each update for SQL Server 2005 on my computer Vista Home Premuim fails. The most recent example is:
Update of security for sql server sp3 KB94981 fails with error 2B 33
for SP2, it was
Security for sql server sp2 KB960089 update fails with error 6AA
Other updates have been ad are successful, although I found out recently that it is the recovery disc option to create under maintenance contract. I fdound the recdisk.exe file, but running it does nothing.
Mike
Maybe check this forum:
SQL Installation of Server & upgrade
http://social.msdn.Microsoft.com/forums/en-us/sqlsetupandupgrade/threads/TaurArian [MVP] 2005-2010 - Update Services
-
Windows Update fails with error [error number: 0x800A0007]-which is not listed
Windows update fails with error [error number: 0x800A0007]-which is not listed, so unable to update the system
The other post:
Thank you for your reply - but the problem persists - this is mopre complete info.
The system starts well and runs - BUT I cannot now be updated because when I access "Windows Update" it always returns this error message.
Also, none of the messages in your "appliesto" step 2 recommended link will be applied effectively.
As far as I know - we have a standard system and I just ran again ONCE a full system virus etc check - all clean.
Also your "Mr Fixit" was performed several times, but nothing changes.
Because it enters the update process, and then always closes with this specific message (which as I said is NOT in your list of error messages), which SHOULD tell your software writers where is the problem.
This is what is happening in the process of updating before it fails:
Keep your computer up-to-date
Check to see if you need updates for Windows, your programs, your hardware or your devices.Get updates of high priority (recommended) Select among the priority and optional updates for Windows and other programs
... and it does not matter if I say "express" or "custom" - headed then:
Checking for updates for your computer...but fails after a few seconds with the same message as follows:[Error number: 0x800A0007]The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. -However, it is the State of the system for more complete information for you:
Name of the operating system Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 3 Build 2600
Manufacturer of operating system Microsoft Corporation
MISCHU06BLUE system name
System manufacturer Compaq Presario 061
ED865AA - ABA SR1610NX NA540 system model
System Type X 86-based PC
Processor x 86 family 15 model 47 Stepping 2 AuthenticAMD ~ 1790 Mhz
Version/Date BIOS Phoenix Technologies, LTD 3.33, 17/08/2005
SMBIOS Version 2.4
Windows C:\WINDOWS directory
System directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume2
The local United States
Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
MISCHU06BLUE\Compaq_Owner user name
Time zone Pacific Daylight Time
Total physical memory 1 024,00 MB
Available physical memory 468,50 MB
Total virtual memory 2.00 GB
Available virtual memory 1.96 GB
Page file space 1.51 GB
Paging file C:\pagefile.sysPlease get us some help to solve this problem.
What else can I provide?I didn't ask if it was a new issue or a new problem, I asked if she was the same computer?
[This applies to your recent 'me, too' answer to another thread.]
-
I have DSL and a wireless printer that work well when the system starts; EXCEPT the desktop icons disappeared so I can't manage them! If I stop DSL through the system icons, I get the following error messages when I try to restart or to solve problems: do you know what are the services that I need to install/reboot?
Diagnosis of network adapter
Network location detection Info Using the Internet connection at home Identification of network adapter
error Failed with error 0 x 80070424: the specified service does not exist as an installed service. HTTP, HTTPS, FTP Diagnostic
HTTP, HTTPS, FTP connectivity warn HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved warn HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved warn FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved warn HTTP: Error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved warn FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved warn HTTPS: Error 12007 connecting to www.passport.net: the server name or address cannot be resolved error Could not make an HTTP connection. error Could not make an HTTPS connection. error Could not make an FTP connection. Diagnosis of last run time: 16/05/12 16:09:47
Diagnosis of network adapter
Network location detection Info Using the Internet connection at home Identification of network adapter
error Failed with error 0 x 80070424: the specified service does not exist as an installed service. HTTP, HTTPS, FTP Diagnostic
HTTP, HTTPS, FTP connectivity warn HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved warn HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved warn FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved warn HTTP: Error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved warn HTTPS: Error 12007 connecting to www.passport.net: the server name or address cannot be resolved warn FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved error Could not make an HTTP connection. error Could not make an HTTPS connection. error Could not make an FTP connection. Thanks for your attempt to solve my problem.
Curiously he solved my problem of network while solving what has proved to be a problem with the firewall of Windows (see below): who knew?
-
KB2656353 install fails with error 0 x 643
Dear Microsoft support community,
(a) I have Windows XP Professional SP3. I haven't used this computer
in almost a year, so the first thing I did was to hang the
computer, connect to the Internet and run Microsoft update.
There were 78 updates and 75 of them were installed successfully.
(b) when I tried to install KB2656353, the installation failed with error
0 x 643.
(c) Googling turned up to http://support.microsoft.com/kb/976982 .
I tried the Microsoft Fix it 50123, but which did not help.
(d) I repaired then the .NET 4 Client Setup. No joy.
(e) I ran the auditor of .NET tool to
http://blogs.msdn.com/b/astebner/archive/2008/10/13/8999004.aspxAnd he noted "the check is successful" for
.NET 1.1 SP1
.NET 2.0 SP2
.NET 3.0 SP2
.NET 3.5 SP1
.NET 4 client
.NET 4 full(f) I have concluded that uninstall and then reinstall the whole .NET
framework was not claimed for now, since it does not seem
as indicated in KB 976982 corrupted.(g) I checked the registry for .NET 1.1 hotfixes listed issues
in http://blogs.msdn.com/b/astebner/archive/2004/11/23/268934.aspx
in the "Info 9002..." section, but I have not found any.(h) I downloaded the update in a separate file,
NDP1.1sp1 - KB2656353 - X 86 .exe, to http://download.microsoft.com,.
and tried to run as a standalone program, but it stops almost
immediately. By redirecting the logging to a local file, I find
the update has not been installed, but I do not know how to interpret
the log file, which is much too large to be able to post it here in its entirety.How can I get this update to install?
Related post on the same question:
-
Vista premium sp2 updates fail with error 80070643 dt000
Vista premium sp2 updates fail with error 80070643 dt000 I tried to fix the profile of .net framework 4 cliemnt but not resolved. It cannot update update software & MS updates almost obsolete year now. Ideas anyone please?
Hi Ruth,
Error code 80070643 is a generic error that basically indicate that an error has been detected by Windows Installer.
Method 1:
You can perform the steps described in the article.
You receive error code 80070643 0 x or 0 x 643, code error when you use Windows Update or Microsoft Update web sites to install updates
http://support.Microsoft.com/default.aspx/KB/958052If you have performed the steps in clean boot mentioned in this article, don't forget to put the computer to a normal startup by referring to the section "How to return a normal Windows startup mode" in this article once the diagnosis is complete
Note: If you have already completed the steps in this article, you can go to the next method.
Method 2:
You may need to restart the Office Source Engine (OSE) service
Windows Update error 80070643
http://Windows.Microsoft.com/en-in/Windows-Vista/Windows-Update-error-80070643
See also:
Problems with installing updates
http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-problems-with-installing-updates
Hope this information helps. Response with status so that we can help you.
-
I can't start windows Vista, I get this message: Loadkey failed with error 1016
Hello. I can't start windows Vista in all configurations. I get this message: Loadkey failed with error 1016 (sthive = 0).
I get the same message when I try normal or safe modes. The mouse and keyboard do not work. I have
don't know what to do next. Any suggestion would be appreciated. VictorHello and thanks for your reply. The problem has been fixed. I'm not exactly sure how, but that's what happened. When I'm at a screen that says "repair windows" the cursor would not move to click on proceed. When I had almost gave up and was will wipe the hard drivbe and do a clean installation of "Windows 7", I turned on the computer and got to repair screen and the cursor was somehow operable. I clicked on continue and the computer fixed itself and has been running as good as new since. The computer is 'HP' office and running "Vista".
Thank you and this problem is solved. Victor1244 -
Original title: there is an error then that inistalling some programs such as, java, internet download manager and...
There is an error then that inistalling some programs such as, java, internet download manager and...
for example, I want inistall an application or a program like Java, but when I start to inistall, it works like adminstere then said: (Installer: wrapper. creatFile failed with error 123: the file name, directory name or volume label syntax is incorrect.)
It even I mean to inistall Internet download manager and VLC...
my pc is automatically updated and when updates are available whenever I download inistall,.
Please help me, I love my windows Vista, tnx
Hello Aliahriman,
Please look at the post below and see if it will solve your "creatFile failed with error 123: the file name, directory name or volume label syntax is incorrect" question.
He has helped others with a similar issue.
http://social.answers.Microsoft.com/forums/en-us/VistaInstall/thread/3b180316-95c2-4613-8c38-8515481db22cIf please reply back and let us know if this helps solve your problem.
Sincerely,
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Operation failed with error 0 x 00000006 (Windows 7 x 64)
We have a homegroup with a desk and a laptop (wireless connection). Both are running Windows 7 Home Premium 64-bit. The laptop and reviews share files on the desktop and vice versa, but it cannot access the shared printer attached to the desktop computer. The driver of the printer, a Canon MP500, is up-to-date (I have no problems printing directly from the desktop) and sharing has been enabled in the properties of the printer. When I try to install the printer on the laptop as a network printer, the laptop sees the printer but will not connect. I get the following message: "Windows cannot connect to the printer. Operation failed with error 0 x 00000006. "Any help would be appreciated!
Hello
- You have security software installed on the computer?
You can try to install the printer as a local printer and then check if you can print from the network. To do this follow the steps below:
a. Click Start, and then select devices and printers.
b. click on add a printer > add a local printer >
c. create a new port and in the drop-down list box make sure you "Local Port" is selected and click Next
d. then in 'Enter a port name' enter the path to the printer in network - \\computer name\printer name and click OK
try to print and check if it works.
I hope this helps. Let us know the results.
Thank you and best regards,
Srinivas R
Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Original title: printer HP LaserJet 4050 of PCL6 compatible with Windows 7?
I have a desktop windows xp pro (SP3 5.1.2600) and you have a printer HP LaserJet 4050 PCL6. The printer works fine connected to the desktop computer with a parallel port. I'm trying to share the printer on my home network so that Win 7 (6.1.7601 SP1) laptops can use its printing features. Please help.
First I tried to add it with \\hostname\printername that returned this error: windows cannot connect to the printer: operation failed with error 0x000004f1.I downloaded and installed the Win7 drivers on the HP site on my laptop Win7, that has not changed a thing: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=18318&prodTypeId=18972&prodSeriesId=25475&swLang=8&taskId=135&swEnvOID=4063Thanks in advance for any help / support!Hello
1. the two Windows XP, Windows 7 connected in a same workgroup?
2. can you access files shared XP of Windows 7 computer?
3. check if the printer is shared or not?
I suggest you follow these methods and check.
HP LaserJet 4050 PCL6 printer is not compatible with Windows 7. Printer drivers are available for Windows XP-based computers only.
It is not in the Windows 7 Compatibility Center.
I sugegst you contact HP support for Windows 7 drivers, after you instaall drivers to check with the question.
http://WWW8.HP.com/us/en/support-drivers.html
See also: networking computers running different versions of Windows
I hope this helps!
-
I've been struggling for weeks to try to get my computer Windows 7 update to Windows 8.1. It is not interesting to go in full history frustrating because I gave the update and now I just try to start over again. The recent measures and current situation is as follows:
1 PC is powerful enough with i7 and 16 GB chip.
2. new SSD this week.
2. freshly downloaded Windows 8 Pro ISO burned to a DVD and checked.
3 Ran install successfully and signed using my Microsoft Account.
4 tried Windows Store for Windows 8.1, but said I need updates.
4 Ran Windows Update in Control Panel.
5. Windows update found 127 updates and they failed with error code 80248007.
I don't understand how I can get these failures with a new facility.
Any help will be greatly appreciated. Thank you all in advance!
Hello
Glad you got it going... If I had to guess, it was very likely updates .net 3.5, which has caused the problem... or maybe, Net 4.5...
They require a process runs to complete their installation that seems to start running in the middle of updates remaining to try to install...
Maybe you are looking for
-
Mozy for MacAir cloud backup service? Advantages/disadvantages?
Hello (Advantages/disadvantages) experiences with the cloud backup service Mozy for MacAir? I had a great restaurant experience 80 GB of files to a Windows laptop (death) Mozy backup to my new MacAir. If I need to restore files on a portable Mac or f
-
How to find or turn on the captioning for streaming netflix on the internet ready Sony Bravia 46EX700 HDTV? I don't see a widget anywhere on the screen that allow subtitling. I tried to put its configuration preferably for captioning, but it has not
-
ways to increase the performance of the processor
It might be a silly thing to ask, but I can use a 4 GB USB key to increase the performance of the processor during execution of the movies netflix and Amazon to steam. I have 17.4 GB of free space, but then the streaming of the CPU usage is maxed out
-
Helps to identify a small part that comes with the card UTO2-XP
As the described subject line, I'm puzzled to a part that comes with the box UTO2. It of small, rectangular, white, plastic as but sealed in a bag of ESD, pulled in the cage of the UTO2 module. It looks like the home of cable fiber of some sort. If
-
Lost blackBerry smartphones 2 shortcuts
On my Curve 8330, I suddenly found 2 items in the entertainment folder. How can I move these 2 items in this folder to make them themselves? Thank you