Satellite A60 - connected to the WIFI but can't get on the WEB

Similar Questions

• I bought ipad air 1 after that 2013 but can not get the pages for free. Numbers and imovie I can. IOS9 running at the moment. I have pages when I connect on icloud on my pc. Can I transfer iPad app, because it is not in the ILO purchased in itunes.

  Hi everyone, this is my first post, also help on the post would be appreciated.

  I bought ipad air 1 after that 2013 but can not get the pages for free. Numbers and imovie I can. IOS9 running at the moment. I have pages when I connect on icloud on my pc. Can I transfer iPad app, because it is not in the ILO purchased in itunes.

  Thanks in advance

  Newbie

  The only way to install an ipad app is through the app store.  PC or Mac software does not run on the ipad.  Search in the contacts link at the bottom right of this page.  Give apple a call.

  I guess is the icon for pages in icloud for storing documents pages.  At the same time, apple had a cloud based pages.  Not sure what happened to her.

  R

• Unable to connect to creative cloud but can connect to the adobe Web site

  I can connect to the Web site, but the creative cloud says that my password is incorrect every time
  I tried to change my password and it will not always open a session

  Windows or Mac?

  
  

  Tried to reset password of the Adobe Creative Cloud app?

  1)
  

  

  2)

  

  
  

• Unable to connect to creative cloud but can connect to the adobe site... Please help

  Unable to connect to creative cloud but can connect to the adobe site... Please help

  already done. without success. now chat with adobe helpdesk. Thank you

• Satellite A60 - conflict with the clock

  Greetings, I have a problem with a Toshiba Satellite A60, is this: the PC clock ahead a second as the time goes from 4 seconds, IE in the pc are the clock is 09:29:17 and at the same time but to change one second on the pc, like this: 09:29:18 and the clock has advanced 4 seconds 09:29:21, running and disassemble the laptop and check the battery internal from the Board of Directors and is soldered to the pc If you can not take off, but I think that working with the battery of the laptop, the pc does not have windows, in fact I go on any hard drive and go to the BIOS and still gives the error.

  Could this be? I suggest they do? Thank you.

  My language is Spanish, so I apologize for my English.

  Hey mate,

  To be honest I really don t know what exaclty average. Only, I understand that you have problems with the clock.

  The RTC (BIOS) battery can be charged if you leave the laptop connected to the AC adapter. This support also the RTC battery.
  Check this box!

• HP 15-r005si Notebook PC: unable to connect with my wifi but watch my neighbors wi - fi

  Nice day! I recently bought my HP and it came with 8-1 win, after installation win 10 I can't connect with my wifi but watch my neighbors wi - fi settings! I have re-installed windows 10 several times but no luck! I uninstalled the network adapters and re - install the driver and also restart several times without success. Help, please!

  @ToinetteR

  Hey there! Thanks for the reply.

  It's good to know the update driver wireless solved the problem.

  If you have problems in the future, you can get back to us.

  Have a great day!

• I plugged a Linksys router for my Hewlett Packard desktop computer, it shows that it is connected with great resistance, but it won't let me connect to the web.

  I connected the router to my computer desktop Hewlett Packard, it shows that it is connected with great resistance, but it won't let me connect to the web. I also have a mid/fi through Verizon set up on this computer, but I have recently installed Magi jack more and it uses far too much data for the MiFi. What should I do to fix this?

  Hello

  ·         What is the error message or the error code that you get when you try to connect to the Internet?

  ·         What is your Linksys router connected to an Internet service provider?

  ·         Were there any changes made to your computer until the problem occurred?

  ·         What version of the Windows operating system do you use?

  Click on the link below.

  http://Windows.Microsoft.com/en-in/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  To solve the problem related to the Magic jack plu and MiFi Verizon:

  I suggest you to contact Magic jack support. See the link below.

  http://MagicJack.com/customercare.asp

  Contact Verizon support. See the link below.

  http://support.verizonwireless.com/CLC/

  Provide us additional information. So that we can help solve you the problem on your computer.

  Hope this information helps you.

• I can\ to connect to the web server integrated on my D7460?

  Hello

  I had some problems with my Photosmart D7460 printer and resolved (for now) most of them.

  Except that I can't connect to the built-in web server. Also, I do not get a response when I try and ping the printer.

  Giving to think I have problems of network with the exception that I can print to this printer... Well well, from most of the computers on the network, but that's another story.

  I checked what the said road IP address he gave to the printer.

  Any suggestions would be welcome.

  OK, I seem to have solved the problem.

  I'm not sure that bit of material, it was causing the problem but it seems to come form tries to use "WPA & WPA2" parameters (BT Home Hub 3.0) wireless access point.

  Who having spent 'WPA only' I can now ping, print and connect to the web server.

• HP 8500 replaced, software does not detect printer even though I can't ping / connect to the web interface

  Windows 7 Pro 64

  Reference Dell

  Printer connected via ethernet

  software worked well until the printer has been replaced by HP under warranty

  in the new device, the screen of the wizard to set the time/language etc.

  Software HP does not detect the device and so I can not use all the features.

  I can connect to the printer via IP and also tried to put the TCP/IP port with printer static IP. Can I print using this, but the software "suite" does not detect the printer.

  Removed all software, cleaned the registry, removed the IP port, re-installed the software, does still not detect printer.

  Installed HP printer diags and it passes all the tests, but the suite software HP will always be NOT detect printer.

  Tried without firewall, tried with, still can ping printer, connect to the web interface, the static value, always the software does not detect the printer... so whats left to please other than an another replacement warranty which is used to solve the problem, as it is definitely bad coding in the suite.

  I also tried downloading drivers/full later on the HP site.

  Note that all windows updates are met, reconstruction is out of the question that it is a machine of the company and would almost take me 3-4 days to replace all the software on it (Sage, DW, COFFEE, HMRC).

  Hi-Dillion, Declan

• Help, I changed the password of root ESXi via powerCli, now I can not connect with the web client or the console.

  Help, I've changed the root ESXi via powerCli password, now I can not connect with the web client or the console, but I can still connect to powerCli. The command I used was;

  SE connect-VIServer esxihostname-user root - password newpasswd

  This production network btw, I have connected to each host and run the above command, these ESXi hosts are not on a domain

  y at - it something I have left out. I really appreciate any assistance that you people can provide.

  Thank you, Joe

  It is probably a longshot, but a lot of things in the land of windows is not sensitive to capital letters as Unix is.  I wonder if your new password you put through powerCLI mixed uppercase in it and if the capitalization was abandoned by command windows powerCLI Analyzer, or he interpreted as all capitals or something.   If you can still get through the powerCLI you could try to reset the password again to something simple without capitalization mixed case and if your password on ESXi strategy requires a special character, try something different than a "$", like a "_" (I find that a '_' is less likely than some other special characters (, as a '-' or a ' / ' to cause problems with analyzers.).

  Edit:

  Another thing, you can try before playing with the password once again, is to create a different username ESXi using powerCLI and see if the password ends up what you think, it should be, and if you can get with the client vsphere using it.  In this way, you can find out if there are some problems with certain characters or Cap through command powerCLI Analyzer without losing your remaining root by powerCLI access.  After some tests, you can understand what went wrong with your initial password change and may be able to fix it with less risk of losing access.  I also assume that you can not create a new username on ESXi who is able to change the root password no matter what authority give you it, otherwise, you could create a new username with PowerCLI, then connect to the client vsphere with it and change the password to root from there.

• Absent voice memo to the homescreen on IPhone SE there is no 'utility' or 'extras' anywhere; folder Siri is voice memo, but can not get to the home screen? How to apply for voice memo on the homescreen?

  Absent voice memo to the homescreen on IPhone SE there is no 'utility' or 'extras' anywhere; folder Siri is voice memo, but can not get to the home screen? How to apply for voice memo on the homescreen?

  Try going into settings > general > reset > reset home screen presentation.

• I download the latest version of Firefox, but when I go to sign up for google + it tells me that my browser is no longer supported. I tried uninstalling and everything, but can not get the new version appears. Any Suggestions?

  I download the latest version of Firefox, but when I go to sign up for google + it tells me that my browser is no longer supported. I tried uninstalling and everything, but can not get the new version appears. Any Suggestions?

  Please see that.

• has fallen 6 Iphone in the Lake while on 4g. Were not on wifi for a few days. I lose all the pictures taken because I was on wifi or can I get back them some how?

  Hi, I dropped my Iphone 6 in the Lake while on 4g. Were not on wifi for a few days I've been away. I lose all the pictures taken because I was on wifi or can I get back them some how?

  If the phone doesn't work, settings/iCloud and turn on synchronization of Photos. Using a computer, you can go to iCloud.com and download them.

• Device, I have an archos 605 WiFi and can not get the Conect to my pc that like Windows 7

  I have an archos 605 WiFi and can not get the Conect to my pc that like Windows 7

  http://www.ARCHOS.com/support/support_tech/index.html?country=us&lang=en

• Bought Lightroom CC for 2 devices.  One installed fine but can not get the LIBRARY to work on the 2nd unit.  2nd camera, it is the menu bar, but nothing other than a gray screen, 1 device has all the tools.  If anyone can help.

  Bought Lightroom CC for 2 devices.  One installed fine but can not get the LIBRARY to work on the 2nd unit.  2nd camera, it is the menu bar, but nothing other than a gray screen, 1 device has all the tools.  If anyone can help.

  Thanks Tanuj,

  After reloading the software it seems to work now.