Satellite A60 - conflict with the clock

Similar Questions

• Re: Satellite P300 - conflict with the display driver

  Yesterday, I suddenly had a conflict with my display driver. While working on my laptop, a blue screen appeared and then the screen went black and stayed like that. When you use an external monitor, it is possible to start in SafeMode (in normal mode, a blue screen appears). It is possible that a Windows Update has occurred, but I can nog
  cancel anything (no Windows recovery point).

  I uninstalled the display driver and downloaded the latest version, but it doesn't seem to help. Reinstalling Windows won't work or the other cause the installation DVD detects a hardware error (the display driver).

  Does anyone knows how to fix this?

  Kind regards
  Jeroen

  Hey Buddy,

  > Reinstall Windows won't work or the other cause the installation DVD detects a hardware error (the display driver).
  What Windows disk, you used exactly?
  Normally before starting with the installation of Windows, you must format the hard disk and create partitions. If everything is clean at the disk Windows installation starts.

  I advise to use the Toshiba recovery disc. This disk can restore the original settings of the case and before Installation starts the drive HARD to wipe completely.

• Satellite R840 - 12 c - conflict with the RFBUS "Bluetooth."

  My Toshiba Satellite R840 - 12 c has a problem with bluetooth.

  On the Device Manager tab, I see a conflict with the RFBUS "Bluetooth."
  So my bluetooth setting does not work... In other words my laptop cannot detect bluetooth despite being bluetooth devices "on"...

  > Tab in Device Manager, I see a conflict with the "Bluetooth RFBUS.
  So uninstall the device first, then download the stack of BT from Toshiba BT portal and after reboot again install this new.
  http://APS2.toshiba-tro.de/Bluetooth/

• 800 - 030qe envy: conflict with the new video card

  I bought and installed an EVGA GEForce GTX960 graphics card and discovered a conflict with the SATA cable on the motherboard connector. EVGA has recommended that I find a SATA cable with a connector at right angles. Can anyone suggest a source for a suitable cable? Mine is red (?).

  @bobsun2, welcome to the forum.

  This is a cable that should work for you.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• I use an analog input on a PCI-6224 and are having problems with the clock source

  I use an analog input on a PCI-6224 and are having problems with the clock source. I'm trying samples of 16 different analog inputs very quickly. I have the sample mode: Timed Single Point material. The rate, that I am running is the maximum (250 kHz (15625Hz per channel)). I left the default clock source and trying to taste several times. The analogue input works for a short time (2-3 seconds) and then everything stops. I'm doing something wrong or is there something I'm missing? Any advice would be great.

  That's how you samples using the sample clock clock. If you see a delay then something is wrong with how you track/data visualization.

  Single point NI the hardware is for PID control with a real-time operating system.

• SQL statement error INSERT The conflicted with the FOREIGN KEY constraint

  I recently installed a reporting for vmware vsphere software, but I get a SQL error. I opened a request for assistance with vmware, but so far they have not come up with a solution. The error is caused by: com.microsoft.sqlserver.jdbc.SQLServerException: instruction INSERT The conflicted with the FOREIGN KEY constraint 'FK_CB_VSM_NETWORK_VC_ID '. The conflict occurred in database 'VCChargebackVCC02', table "dbo." " CB_VSM_SERVER', column 'VC_ID '. I don't know a lot about SQL, so I'm lost in the extent of troubleshooting is concerned. If anyone has any ideas I'd love to hear them.

  SQL questions are better posed on Technet.  They are better equipped to manage the

  http://social.technet.Microsoft.com/forums/en-us/categories/

• ORA-39060: one or more tables has declined due to conflicts with the main table

  Dear all,

  Currently, I have problems, I try to import the entire schema

  bash - $3.2

  bash - $3.2 impdp dumpfile = PRODDUMP BALL/BALL_BALL@BALL. DMP DIRECTORY = DUMP_DIR FULL = Y LOGFILE = IMP Log REMAP_SCHEMA = BALL: BALL REMAP_TABLESPACE = BALLDATA:BALLDATA

  Import: Release 11.2.0.3.0 - Production the my Sep 30 15:28:08 2013

  Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.

  Connected to: Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  With partitioning, Automatic Storage Management, Oracle Label Security, OLAP,.

  Options of Data Mining and Real Application Testing

  ORA-39060: one or more tables has declined due to conflicts with the main table

  UDI-31626: operation there was error ORACLE 31626

  ORA-31626: there is no job

  ORA-39086: cannot retrieve information about jobs

  ORA-06512: at "SYS." DBMS_DATAPUMP', line 3326

  ORA-06512: at "SYS." DBMS_DATAPUMP', line 4551

  ORA-06512: at line 1

  Any solution please

  Hello

  You can use the view:DBA_DATAPUMP_JOBS

  then use the table as drop statements

  drop table . purge;

  HTH

• Satellite A60 crashes with BSOD using the WLan connection

  Hello

  The son laptop works well 24/7 If you use the local cable network on web access, but as soon as we install Wifi it crashes on a regular basis (2 or 3 times an hour) with BSOD error messages - normally those helps Microsoft cant (via the event viewer report) with but it is often talking about Toshiba phone services but no solution.

  Tried two (netgear) pcmcia & usb (agere) wifi cards - exactly same problem can not maps.

  In desperation re-formatted & resettled Xp & all drivers Toshiba of original Cd of Tosh, then Xp Sp2 & then all the updates/fixes engineering including the bios from site Web of Tosh. Still crashes.

  If the software has - v installed or not makes no difference.

  A 512 extra ram on top of 256 original.

  Any ideas?

  Please believe me that it is not easy to say why the BSOD appears!
  From my personal experience, that the BSOD can occurs because of the problem of critical software, or because of the problem of equipment.

  In your case, it looks like a hardware problem (this is my personal opinion)
  Generally, the laptop should work with the external WLan USB card. I put t see no reason why it shouldn't work t.

  You said that you have updated the RAM on this laptop, I noticed on many laptops than similar issues after a RAM upgrade.

  For example; I inserted the new 1 GB RAM on my old Satellite and received a BSOD. I used a compatible but the BSOD appeared sometimes.
  After the passage of the modules to another location memory my laptop works properly!

  Please check this box. Maybe you could check if the same thing happens with your old module!

  Good luck

• Toshiba Satellite A60, problem with Pinnacle PCTV USB2

  I bought Pinnacle PCTV USB2 and I get no video but audio only on my Toshiba Satellite A60. I tried to put it on the line with Pinnacle support, but they say it is an Ati Radeon problem, who can solve a new problem of driver. Anyone of you has an idea about this problem?
  Thank you and sorry for my bad English.
  Celestino
  Italy

  p.s. with other pc as my PCTV works well

  Hello
  There is a new Radeon Ati Graphics Driver on the Net.
  You can try if it works on your system.

  Look, here is the link for more information and the driver-> http://www.bebits.com/app/2938

  Hope this helps you

  BR

• Satellite A60: upgrade of the integrated Radeon 7000 graphics memory

  Hello world!

  I was wondering if I could get up to 128 MB of RAM on my integrated ATI Radeon 7000 IGP?

  Maybe I could move my RAM to 1 GB to get 128 MB of video RAM on my Radeon 7000?

  Thank you!
  suddste

  Hello

  It would be very interesting to know the full name of your Satellite A60 - xxx unit because some models were shipped with the shared memory graphics card and it should be possible to change the memory up to 64 MB max.

• Satellite A60 - lines on the screen

  Hello

  I have a Satellite A60 with a graphics problem. The screen contains all the lines and is also the same when connected to an external monitor.

  Thanks Ian

  Hello

  Usually, when someone writes something on the laptop there is usually a question at the end. I understand your ad as a single report. ;)
  You have any questions on this subject?

  Anyway just a comment to this: graphics card is faulty motherboard Exchange.

• Satellite A60 - connected to the WIFI but can't get on the WEB

  Hello

  I have a really strange problem with my Satellite A60. I have a US robotics wireless router. I can connect with my laptop, in the sense where it says that it acquires an IP address and then he said: it is connected, but then it is not possible to browse the web or access to the router. Let me also point out that:

  -The internet connection works fine if I connect the laptop to the router via a cable (for example, I can access the router)
  -J' have a second computer that is connected via WIFI to router and it sees no problem (it goes up an adapter for US Robotics)
  -WEP encryption is active, but I'm sure that the key is correct. I also try to disable but did not help
  -MAC address filtering is enabled, but the laptop WIFI card is in the list. I also tried to disable content filtering, but it did not help
  -J' also tried to remove the encryption and MAC address filtering, but it did not help
  -In past I could connect to other networks WLAN with my laptop

  I hope that I have provided sufficient detail so that someone can try to help me.
  Thank you in advance!

  Hello!

  I think that the integrated firewall router and dhcp server integrated are the first things to check. May be there are separate configuration for Ethernet and WIFI connections options. Check if your wireless connection is "default gateway" address when the computer shows that it is connected to WIFI. If no default gateway address is then most likely it's dhcp or confiuration problem your router firewall.

• Satellite A100 - problem with the operation of the battery

  Hello!

  My laptop (I bought 1.5 years ago) has a big problem when you use with the battery.
  First of all, with a fully charged battery, the notification of "limited battery status" appears after 2 minutes of operation and after 5 minutes, he goes to the standby mode due to the level of the battery is very low.

  Then, I plug it into the AC power and the battery remains yellow for about 15 minutes light and then turns blue.
  (The battery is OK, I tested it on another satellite A100)

  What can be the problem?

  Thanks in advance!

  Maria

  Given that you have tested the battery in another satellite A100, the problem must be in the settings of your computer:

  1 > START > CONTROL PANEL > POWER SELECT THE OPTIONS ICON

  2 > you will now see a screen that shows your management food and note * one * has a tick that is a small point in a circle:

  3 > BALANCED > POWER SAVER > HIGH PERFORMANCE

  4 > THE PLAN OF POWER > CLICK ON CHANGE PLAN SETTINGS > WILL DISPLAY A SCREEN SHOWING YOUR PLAN!

  5 > GO TO > * CLICK * WHERE IT SAYS CHANGE ADVANCED POWER SETTINGS

  6 > IF YOU SCROLL THE BAR TO THE * SIGN + > BATTERY-CLICK * THE * SIGN.

  7 > YOU SHOULD HAVE: you will need to have play with these settings, or you can click on restore plan defaults to see if that will solve your problem

  Notes by clicking on the * + plus SIGN next to tany of these options below will allow you to change what event happens on your computer.

  + CRITICAL BATTERY ACTION

  + LOW BATTERY LEVEL

  + CRITICAL BATTERY LEVEL

  + LOW BATTERY NOTIFICATION

  + BATTERY LOW ACTION

• Satellite P200 - problem with the use of disk HARD original as external drive

  I've been pulling on my hair for a month now and could do with help

  I have a Satellite P200 series PC laptop and have recently updated from the 200 GB for a pair or 320 GB HARD drive. No problem

  The question I have is that the old drive of 200 GB system I am unable to use it in any other machine or according to and external storage device.
  The original secondary disc works fine few matter where I use it... (In my PS3 at the moment)

  When I install the orgional system drive in my laptop and rebuild windows it it still works 100%.
  Hance a good work of 200 GB of HARD drive.
  Take it out and serve in another machine of storage that it won't - boot all I get is cyclic redundancy errors

  I formatted, low level run endless disk tools
  WD test came back with diagnostics Test::Read 11 - cable sector error!

  Even as a drive on the original laptop is the same

  All ideas taken with gratitude that I don't want to lose a good 200 GB HARD drive

  Thank you very much
  Roger

  Hello!

  The external box is maybe defective, because you said that the HARD drive works in your laptop and the PS3 without problem.
  You can test the HARD drive in another external case?

  WD test unknown to me but I always use the Drive Fitness Test:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  With the Drive Fitness Test, you can test your HARD drive. Download the CD image, burn it to a CD and boot from it. You can then the HARD drive.
  On the same site is a user's guide if you want to know more.

  Good bye

• Satellite U500 - problem with the cooling system has been detected

  I have a Toshiba Satellite U 500 series, and I just got a message saying "a problem with the cooling system has been detected. Please turn off the power immediately and return it to service.
  Before that, I would like to know if anyone has had this problem and if there is a software solution?
  HIERARCHICAL

  Check HERE to see if anyone else had this problem in the past.