Satellite C50D - PC Health Monitor shows the low battery

Similar Questions

• Satellite L850 - 1 FG: PC Health Monitor shows the bad battery

  Greetings,

  Already after a little more than two months after the purchase of this laptop, the TOSHIBA PC Health Monitor indicates that the health of my battery is 'poor' (about 1/4 health left!) and I wonder what possibilities there are that this is a hardware fault, and if I can get a spare battery and where.

  Thank you in advance.

  Hello

  I m not sure if its really a battery problem or failure.
  Maybe the battery needs to be calibrated several times in the line

  If the battery charge level is low, turn off all first battery should be completely discharged the automatic stand-by and the focus mode into hibernation.
  The battery must be completely empty. Then plug the AC adapter and charge it until the battery indicator would turn blue (or green).
  Then, unplug the AC adapter and start the discharge process
  Repeat this 3, 4 times and then check the health of the battery again.

• Satellite A660-17 t - PC Health Monitor shows the problem with the battery

  I have an A660-17 t I've had since November 2010, I used a good amount, but not always on the battery, I believe that the battery has between 10 and 20 on this charge/discharge cycles.

  I have updated the BIOS to v1.80 when I got the laptop, everything seemed to go well. Recently, in the last 2-3 weeks health monitoring software reports that the battery is in poor health, showing that the capacity is reduced to 40% of the original capacity. I do not believe this like when I work on battery I get several hours of use.

  I have today updated BIOS v1.90, although there is no changelog that I can find, he says just "enhanced features" or similar.

  Is this really a faulty battery, or it is somehow that the software correctly reads the value of the capacity of the battery due to a change in Windows or another change in the system? I don't see how a battery can work for the same amount of time it has always done and actually have a fault.

  Any thoughts? Should I return it to the retailer and report an outage, or is it worth the wait to see if a future update of operating system or driver solves this problem?

  Thoughts welcome!

  Hey,.

  > I do not think this as when I work on battery I get several hours of use.
  This means that you have the same time remaining on battery as before you saw the error of the integrity PC monitor?

  In this case, it seems that the battery is ok and it's maybe s simply the wrong tool of Toshiba information. Then I recommend to reinstall PC Health Monitor, which you can download from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads

• Satellite L40-139 - possible to disable the low battery alarm?

  I have a Toshiba Satellite L40-139 it comes with Windows Vista running. I think the battery is now a little age, because it does not load when the computer is plugged in - although the computer itself is capable of functioning when it is plugged in, which is how I use it.

  Battery sank to about 10%. For this reason, the computer will sound low-battery-warning beep every fifteen seconds or more. This seems to come from the computer itself and not the operating system, it sounds different from low battery alerts in Control Panel > sounds.

  I would like to disable this beep - it is not to tell me anything I don't already know. Until now, the only way to achieve this, I have found is by inhibition of the laptop altogether. But is not ideal, because it means that I can't use any other sound feature on the computer.

  I tried, without success, changing the settings in the control panel > power settings, including lower low and critical battery levels and fix warnings for low battery to "off".

  Any ideas?

  Hello

  Please check the BIOS settings.
  To access the BIOS F2 press Mobile start upward.
  There should be an option called something like low battery alarm
  Remember to save the changes before exiting the BIOS.

• gauge the battery to the boot screen and battery on report menu conflicting Details about the level of the battery. The gauge from the battery to the Starter incorrectly displays the low battery level that prevent the macbook pro battery retina start

  gauge the battery to the boot screen and battery on report menu conflicting Details about the level of the battery. The gauge from the battery to the Starter incorrectly displays the low battery level that prevent the start of the battery. This happens on macbook pro retina 13 inches

  When I try to startup macbook pro retina in battery mode, it will fail to start showing low battery level and an indicator to recharge the battery. It does not start on battery. When I then connect via the power cable at startup (and check the battery level), monitor of battery in the menu bar indicates that the battery is charged to the top.

  It gets really frustrating and remove my ability to use the macbook pro retina as a truly portable device...

  Appreciate any help on this

  Have you tried resetting the SMC? Reset the management system (SCM) controller on your Mac - Apple Support

• Apple still has a spare battery for Macbook late 2008 13 "aluminum unibody? My battery status shows the service battery. I have reset the alert status about 6 months ago, but he will not be reset again. Thinking I need a new battery Apple

  My battery status shows the service battery. I have reset the alert status about 6 months ago, but he will not be reset again. Thinking I need a new battery Apple!

  Batteries are no longer available on the Apple online store but can be at your nearest Apple Retail Store, you must check with your store. A better option is probably buy one yourself and replace it. Buy a quality like this http://eshop.macsales.com/shop/apple_laptop/batteries/MacBook_13_Unibody battery

  Avoid imitations cheap as those who are sold on auction sites.

• How can I activate the low battery alarm?

  How can Studio xps 1340 I activate the audible alarm for low dough?

  Hello

  Two things:

  (1) control Panel/Power Options/change Plan/change plan settings advanced settings under battery make sure that notifications are enabled.

  (2) Panel of configuration/sounds/sounds tab, make sure that a sound is associated with the low battery notification event. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• The response of the mouse becomes slow and I get the low battery warning

  Original title: Use the Microsoft Wireless Multimedia Keyboard 1.1 model 1014.  Recently, I had replace the batteries in the mouse at least once a week.  Is there a solution?

  The response of the mouse becomes slow and I get the low battery warning.  Until this started happening batteries have been change less than a month.

  Hello

  1. What is the brand of mouse and the model?

  2 have you ever done any recent software or changes to the hardware to the computer?

  If you use the Microsoft mouse, I suggest you follow these methods:

  Troubleshoot a wireless mouse that does not correctly:
  http://support.Microsoft.com/kb/321122

  Troubleshoot the incidents of the response to the mouse or wireless keyboard:
  http://support.Microsoft.com/kb/838398

  Use the following tips to get more life on the batteries in the keyboard and mouse:

  a. use the mouse on a surface of clear color. With the help of the mouse above a black surface can deplete the battery at a faster pace.

  b. do not use the mouse on a glass surface.

  c. when replacing the batteries, use alkaline batteries. Other types, may not last as long.

  d. when wireless devices are not in use, store them near the computer.

  I hope this helps!

• Satellite L510 - PC Health Monitor - could not get the Type of Bios

  Hi guys,.

  I m appeal for some help and hope that some of you experts out there may be able to help me!

  My laptop is a Satellite L510 bought November 2009
  Windows 7 Home Premium SP1 32-bit
  The version of the BIOS/Date: INSYDE, 1.30, 08/05/2009

  Problems:
  1 ReelTime (worm: 1.0.04.0) TC00210100H stopped working about 6 months ago, so I uninstalled it.
  2 PC Health Monitor (worm: 1.4.0.0) TC00148300O

  Value Added Package: Worm: 1.2.25 (TC00214700E)

  For a couple of weeks stop would take a little longer than before and last weekend he just stopped even if the battery is fully charged.

  I had a bit of a job to resume but I finally did, I came to the conclusion even if the hard drive was not.

  I then tried to open the PC Health Monitor, but this error appeared impossible to get the type of bios and obviously wouldn t open. I uninstalled PCHM programs and features and then ran TC00148300O.exe of
  C:/Program Files / Toshiba / TOSAPINS / COMPS1 / TOSHIBA PC Health Monitor - 1.4.0.0, it seemed something was going on but ultimately nothing has.

  I dropped while I needed to sort first on the hard drive. Long story short, the hard drive has been replaced by a SSD 840 EVO 250 GB by a friend of TI at work.

  I prefer like to get ReelTime and PCHM working again correctly troubleshooting (with your help) that I put t really want to restore back provided that the factory, but if I have to...

  If I have explicit instructions on how to do that would be a big help (if necessary I can also get my friend to help me).

  If I n t give any other specific information that you need please ask. I apologize for this long post, but thanks to anyone who responds.

  Hello

  If you replaced the HARD drive I recommend you to install original recovery image and start using your machine with the factory settings. After that it all will again be OK. Install important Windows updates current, your important software and I think that everything will be OK again.

  Software related questions can sometimes be very complicated. All you can try to do is remove pre-installed application, restart the computer and try to install it again.

  On BIOS I can just say that you shouldn't change anything.

  One last thing: I don t know how important ReelTime and PC Health Monitor are for you, but I removed the two applications on my system. In my opinion there is no much help from both of them, but they CPU utilization for the unnecessary process.

• Re: Satellite A350 - PC Health Monitor or EcoUtility?

  Hello

  It is or will be like PC Health Monitor application or Toshiba Eco Utility for my laptop Toshiba Satellite A350-13? As an operating system I have Win7 64 bit.

  Thank you.

  Hello!

  Reason for which you want to install utility eco if it s is available for your laptop? I checked the page of download driver Toshiba Eco Utility is available for the A350 PSALWE series and not yours, which is model PSAL6E.

  Anyway, you can install PC Wizard 2009 for example. It shows you information such as temperature, voltages and so far. Test if you will be satisfied by this program and give us feedback! ;)

  Good bye

• Satellite U940 - download Health Monitor

  Recently, I managed to updated the integrity monitor (which paradoxically the Heath monitor recommended).

  An error indicated there was "an older version installed", and I was advised to remove it all first. I did, doesn't have any path to be automatically informed of pilot and other improvements, including the health monitor.

  It seems that the health monitor has not saved the download file - it is not in the downloads. He recorded other places? He did not me, invites so the location is hardcoded, wherever she is.

  I only do that because a previous update of the bluff Health Monitor driver my touchpad driver.

  OK... you'd think I'd be able to download the new drivers manually, right? Alas not. My part number doesn't seem to be acceptable for the selector of downloads on the selector to THE Toshiba window, and even there is no model of U above U500 in the drop-down list of templates.

  So much trouble here!

  Can anyone suggest how I might have the correct setup file of Health Monitor for my Satellite U940?

  Thank you

  Hello

  Can you please post full model name and the part number of your laptop?
  I want to just check the Toshiba download page and try to find the right version to download.

• Portege Z10T-A140: Toshiba Health Monitor shows bad battery

  Hello

  near 1 week old I am a Z10T-A140 ultrabook.
  Then I active Toshiba Health Monitor and can view HARD drive status.

  But to see the battery, it's bad!
  Why my battery see the poor?

  Thank you.

  Hello

  It is not unusual for new batteries.
  You know that batteries must be calibrated first to achieve the best performance.

  Calibration means that the battery must be fully charged and discharged and then until it s completely empty. This procedure should be repeated several times in the line. After that, you can check the status of the battery provided by new health monitor

• Satellite C50D - A - 13 G affects the WiFi devices

  Hi all, first post and a problem, like most I guess!

  Bought my first W8 portable Satellite C50D Tosh - A - 13 G

  Wifi is driving me crazy

  When it connects to my wifi BT, all the other designs the loss of home their wifi connection.
  This new laptop, "hog" the seams the connection,.

  Only way out, is to make the power of the BT box and wait 5 minutes!

  I guess, it's a window 8 setting somewhere, but sorry I'm a bit of a dummy!

  Any help would be appreciated, please

  TIA

  Tim

  Hello

  It seems really strange to me that the connection this laptop WLAN would affect the other devices that are connected to the home network wireless.

  You use a WLan router common home - which provides a pool of IP addresses which are assigned automatically to each devices?

  The Satellite C50D - A - 13 G was equipped with a card of WLan Atheros 802.11 b/g/n commune (chip WB335) and this module actions WLan and BT connectivity.

  I recommend you to disable Bluetooth while using the WiFi network.
  You can do this by going to charm bar (Win key + C)-> settings-> PC-> PC and devices-> Bluetooth settings
  Here, you can move the cursor ON / OFF

• Re: Satellite C855-1GQ - Health Monitor is unable to get disk information

  On my new C855-1GQ "Health Monitor" says that it is impossible to get the drive information and so cannot use the alert function.

  Is this normal?
  I can disable this bubble but just thought I'd ask anyway.

  Thanks - Joe

  It's just a notification you can disable it if you wish.

• Satellite Pro A660 - extended monitor on the left?

  I have some trouble getting the extended screen (2) to be positioned on the left side of my laptop A660:

  I have my new Toshiba (thanks to his monitor, call Lap1) set to the right of my big external flat screen (Ext2).

  In the nVidia control panel, I have the options like in the screenshot, that allows the Ext2 sit to the right of the Lap1, which means that my mouse goes to the Ext2 on the other side (the right side) of the monitor Lap1...

  Is there a way to get the Ext2 and Lap1 monitors (see screenshot: http://i53.tinypic.com/i39myd.jpg) to the position of the switch for my Lap1 is extended to the LEFT with Ext2?

  Any help much appreciated!

  HL

  Hello

  > Is there a way to get the Ext2 and Lap1 monitors the position of the switch so my Lap1 by Ext2 is extended to the LEFT

  To be honest, I don't know if it's possible to m.
  I n t have a laptop but the A660 and the external monitor is also connected to this laptop. I use the extended so desktop but eat t n for this scope on the left side.
  But I have an Intel graphics card. Even if the GPU driver has been updated, the Office may be extended to the right only.

  But I managed to make my external monitor as the MAIN monitor and the laptop as secondary display monitor.