Satellite Pro A660 - extended monitor on the left?

Similar Questions

• Satellite Pro L20 external monitor as the primary device?

  Hello.

  I want to configure my computer to use an external monitor, it works very well to extend the desktop on the external monitor as one long section.
  But what I want is to use the external monitor as the primary device and the display on the laptop as secondary and extended desktop part. These choice is already in the prperties of the configuration screen in windows xp, but they does not work.
  Is there som kind of updated driver or utility separated to resolve this problem?

  RGS.
  Frank

  Hello

  As far as I know it of not possible to set the external monitor as a main display and the screen of the laptop as secondary display.

• Satellite Pro A660 - wireless network adapter issues

  Hi guys hope you can help!

  I have a Satellite Pro A660 - 11 M Windows 7-64 bit

  The wireless network adapter does not work...

  I tried to reinstall the bios and the driver wireless.

  The wireless button is lit to Yes as the key Fn + F8 doesn't show not relevant wifi is turned on/off as usual!
  It shows also in the Device Manager and BIOS.
  Is there something I missed? Or is it a faulty card?

  Hello

  > It shows also in the Device Manager and BIOS.

  First of all, you won't find any WLan entries in the BIOS.
  But you should see the local network card in Device Manager.
  If good WLan driver has been installed, the local network adapter device should appear in devices-> network cards Manager.

  If WLan driver has not been installed properly, you'd still see an entry under network adapters, but it should appear as unknown device or Ethernet controller.
  You can this inscription?

  In addition, the WLan driver was released on the Toshiba UE driver page.
  The question is; have you chosen the right Wlan driver.
  As much as I know that the laptop supports the BROADCOM 802.11(B/G/N) BCM94313 WLan card and, as a result, Broadcom Wlan driver should be used.

• Satellite Pro A300 freezes when on the internet

  Satellite Pro A300 freezes when on the internet & the only way to turn it off is to take out the battery. Bought new Dec 2010 & is under warranty - suggestions?

  Hello

  have you tried to update drivers Lan (wlan)? What browser do you use? I guess, the Internet explorer, try firefox or opera. Also, your computer may be infected with the virus, or blocked by the firewall. Have you installed software before it starts? Is this ok when you bought it? I ask you too, because you do not have a lot of information.
  It is especially the driver, software problem.

• Satellite Pro 4200 how to avoid the mistakes of the ACPI

  Satellite Pro 4200 how to avoid the ACPI errors after installing SP2 for windows XP Prof
  The problem is that my computer after installation service Pack 2 need about 15 minutes from time of shoutdown - what should I do to avoid this problem.
  Piotr Plecke

  Hello
  in this case it would be interesting what Type of laptop it is exactly.

  You will find this model on the bottom of your laptop. There is a review of it.

  Some models have a Bios update available, others not, for example.

  Please send additional information!

  Good bye

• Re: Satellite Pro A200 - black screen after the BIOS screen

  Hello
  I'm new to the forum and have a big problem. So, any help is welcome and appreciated.

  My Satellite Pro A200 turns black after the BIOS screen and a black screen with a blinking cursor. Also just as the screen goes black a beep can be heard which shows windows boot.
  I can access the toshiba Setup screen but not the installation of security mode.

  Kind regards

  Hello

  You wrote that you can access the BIOS, but have you checked if the HARD drive is recognized properly? Perhaps because the computer cannot start HDD isn't recognized then you should check this.

  If the HARD drive is recognized, I would try a Toshiba Recovery disk recovery facility. It seems that Windows isn't able to start and if you reinstall the whole system should help get rid me of this. Go to the start menu and select the CD/DVD drive as a boot device.

  Check this box!

• Satellite Pro 4600: where to find the drivers

  Where to find drivers for Toshiba Satellite Pro 4600 drivers?
  We cannot choose this model in the support page...

  The drivers for this laptop Satellite Pro 4600 series are on the European driver Toshiba page.

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  The laptop seems to be an oldie and therefore you should take a look in the _ * Archives * _ folder!

  Best regards

• Satellite Pro L40 - how to enable the WLan using ConfigFree

  Can you help me?

  My English is bad I do not end.

  The question is:
  My computer is a Toshiba Satellite Pro L40 and I use the ConfigFree for the wireless, but it seems that the WiFi network is disabled.

  Help please!
  I want to know what's wrong

  Thank you!!

  Hello!

  Your wireless network card is recognized correctly in the Device Manager, or you may notice a yellow exclamation?
  Her check first because otherwise, you can get the WLAN to work.

  In addition, you can activate WLAN with the material on the laptop switch which must be set on and the FN + F8 key combination.
  Check it!

  After this Free Config should find your WLAN router if you are in the range of that.

  Good bye

• Satellite Pro U400: How to configure the VLAN for the Marvell Yukon LAN control.

  Hi all
  I need to access the 2 VLANS with the controller LAN Marvell Yukon 88E8072 for my Satellite Pro U400. I installed the necessary Configuration utility network Marvell tell me after installation, VIRTUAL local network settings must be mounted in the Device Manager (Windows 7, right click on computer, properties, click device/network management adapters/double on Marvell Yukon 88E8072 PCI-E Gigabit Ethernet Controller), I can't find a thing to configure here but wake-on-LAN.

  Any suggestion? Thank you!

  Michael

  Hello

  I think that in this case, you can use a network switch.

• Satellite Pro A300 - upgrade RAM of the former model A200

  Hello

  I need an advice. I just took a memory (Samsung) 1 GB of more old model Satellite A200 module and put it on my new model Satellite Pro A300. Here is the information about the SPD:

  _Original (which has been installed in the factory): _

  DIMM1: Kingston (2 GB DDR2-667 DDR2 SDRAM)
  Manufacture Date week 20 / 2009
  @ 333 MHz 5-5-5-15 (CL-RCD-RP-RAS) / 20-43-3-5-3-3 (RC-RFC-RRD-WR-WTR-RTP)
  @ 266 MHz 4-4-4-12 (CL-RCD-RP-RAS) / 16-34-2-4-2-2 (RC-RFC-RRD-WR-WTR-RTP)
  @ 200 MHz 3-3-3-9 (CL-RCD-RP-RAS) / 12-26-2-3-2-2 (RC-RFC-RRD-WR-WTR-RTP)

  _From old Toshiba Satellite A200: _

  DIMM3: Samsung M4 70T2953EZ3-CE6
  Manufacture Date week 42 / 2007
  @ 333 MHz 5-5-5-15 (CL-RCD-RP-RAS) / 20-35-3-5-3-3 (RC-RFC-RRD-WR-WTR-RTP)
  @ 266 MHz 4-4-4-12 (CL-RCD-RP-RAS) / 16-28-2-4-2-2 (RC-RFC-RRD-WR-WTR-RTP)
  @ 200 MHz 3-3-3-9 (CL-RCD-RP-RAS) / 12-21-2-3-2-2 (RC-RFC-RRD-WR-WTR-RTP)

  According to the information provided was it a good or bad idea? I mean differences in the SPD and will this performance, stability, etc. ?

  Thanks a lot for your time!

  Hi xosman,

  According to the information that you have posted it seems that the other Satellite A200 module has the same specifications, so if your laptop works with this module it s no problem I think.

  Satellite A200 A300 using the same memory modules DDR2 so change the RAM is no problem.

• Satellite Pro L300: How to get the sleep settings

  Before you have to play with the Satellite Pro L300 laptop recently (on the instructions of the Tech) when I close the lid of the laptop that he went to sleep BUT when I opened the lid eventually, I had to press the power button to restart the laptop.

  But now, he's just on stand by.
  How can I get this back to how it was (having to press the button to exit stnd - in)-help!

  I tried to turn off Toshiba power saver and using the windows settings but nothing
  I have treid working :(

  Can anyone help?

  I get at the end of my home with this computer laptop blinkin :(

• Satellite Pro A200 - how to activate the new device LAN card?

  Hello.

  I have a Satellite Pro A200 and I replaced the card with an Intel 5100 (512AN_MMW) wireless and it detects OK and installs the drivers etc, but it does not work because he says that the switch is turned off on the front of the laptop. The switch is on I also tried pressing fn + f8, but it still does not work.

  The laptop is running Windows 7 64 bit

  Kind regards.

  Hi evo8.

  What card WLAN have you had before and do the work of a former?
  I think that it of difficult to say why it doesn t work but maybe this card is not compatible.

  By the way: do other FN keys FN + F8 work or simply not?

• Satellite Pro 6100: cursor disappears in the upper right or lower left corner

  I guess because of the setting based on the device keyboard pointer cursor often disappears and is difficult to return to the screen. It is not possible to disable in the bios.
  Anyone have a suggestion how to disable this device pointer? I saw that the connection of the keyboard consists of two pieces of a part color Cooper 5 sons and a part of silver color. The colorful copper would be the device pointer and what will happen, is that I simply disconnect the coloured copper of the connector part? I use a USB mouse, so I did not need this device
  Satellite Pro /SP610E SP6100

  Post edited by: SDV

  Hello

  If you really Don t need you should unplug the part coloured copper, I think that this could be the mouse. The connection of the mouse contains generally less son then the connection of the keyboard, so it should work.
  On the other side, I suggest you go to ebay and search for a new (can also be used but works) keyboard, because I Don t know if it s really healthy to work with the machine with connectors or cables disconnected internally.

  Welcome them

• Satellite Pro L300 - external monitor has a yellow tint to the screen

  I have connected a new external monitor to my Sat Pro L300 and the monitor of the station has a strong tinge of yellow to the display.
  I have tried with other monitors and cables and they do the same screen that is yellow.

  Can anyone suggest what I can do, I tried to change all the color settings, but they don't get rid of the yellow tint.
  Thank you.

  Well, maybe this problem is related to the failure of hardware since will have to show common colors without changing the settings in the color settings in the graphics card Control Panel

  In my opinion this s hardware problem
  However, before I ask a technician for advice I recommend updated the BIOS and reinstall the graphics driver.

• Satellite Pro A100: No output on the monitor - Linux Suse 10.1

  I'm trying to install SuSe 10.1 on my laptop and I get no output on the monitor. What is the provider to monitor and model?

  Hello

  Do you mean the monitor or the graphics card?
  As far as I know the laptop was delivered with ATI MOBILITY RADEON X 1400 graphics card; ATI MOBILITY RADEON X 1600 128 MB and 256 MB of video ram.

  In addition, as far as I know it was delivered with screen 15.4 "(1280 x 800) color screen wide display TFT CSVI." I think that the seller is Toshiba