Satellite click mini camera rear problem

Hello! could someone help me please. 10 rear camera no longer works after upgrade and installation of windows. What will I do to solve this problem? Help, please. Thank you

Click on the Mini - fix driver camera
------------------------------
This has two cameras:
-"Front" is a webcam above the screen low resolution. I think that this example uses an OV2722 sensor.
-"Backwards" is a camera of higher resolution in a corner of the white species. I think that this example uses an AR0543 (Intel Avstreams camera) sensor
When I got the Mini click (Win 8.1) only the rear camera worked. After the upgrade Win10 worked only the front webcam
-previous discussion forum below gave me enough information to solve the problem.

1. in the Device Manager there are three relevant entries:
-under the heading of imaging devices, there is a single entry for "Signal imagery 2400 processor"
-under system devices there were two entries: ar0543 OV2722 sensor camera and camera sensor Unicam
2. the driver for camera sensor Unicam ar0543 is OK (10/07/2015), but you'll have to let him search online for updates from the other two.
-With camera sensor OV2722 there simply a updated driver from 2014 to 2015/06/15
-With 'Processor of Signal imagery 2400', it will update the driver (to 07/04/2015), but the entry of imaging devices becomes "Intel Avstreams Camera.
3 Win10 then you ask to restart because there has been a change in material.
-After that the camera application has an additional button that lets switch you between the two cameras, and both work very well.

Tags: Toshiba

Similar Questions

  • 10 on Satellite click Mini L9W - B - all Windows problems?

    Everyone got the upgrade to Windows 10 yet?

    Problems with the drivers, etc?

    It seems that Toshiba has released new BIOS v5.0 for series Satellite click Mini L9W - B.
    This BIOS supports 10 win and I think that when you have upgraded your system to win 10, you should also try to upgrade the BIOS at least for v5.00 - Win

  • Satellite Click Mini L9W - keyboard not recognized B

    Hello

    I have a problem with my Tablet PC Satellite click Mini L9W - B. The keyboard is not recognized on this subject.

    I tried to clean the connector, restart the Tablet several times, tried to load with or whitout the keyboard, but nothing works!
    I do not think that the problem is with the battery, as I've seen on other topics as the tablet doesn't detect even the keyboard when I plug. The Tablet does not detect the keyboard battery.

    So, if you can give me advice or assistance to solve my problem, I would appreciate :-)

    He has no communication with the keyboard at all? (No battery detected, the touch pad and the keyboard does not?) There must be a link related question, I guess. If it was a driver related issue, then the battery would at least get detected)

    If you want to void your warranty, you can open the Tablet and keyboard dock and check that the Ribbon connectors or / and remove and replace the Ribbon connectors connectors in

  • Satellite click Mini L9W - B has a digitizer?

    Hi all

    I was wondering if the Satellite click Mini L9W - B supports writing with a digital pen?

    See you soon!

    Unfortunately, the Satellite click Mini L9W - B does not support the digitizer but computers laptop Toshiba Portege Z20t-B or Portege Z10t

  • Satellite click mini external hard drive not reconising or external DVD drive

    Hi guys,.
    I recently bought a Toshiba satellite click on mini, tried to use my external hard drive, but its does not at all. Any ideas on how to solve this problem?
    It is a Seagate 250 GB hard drive. Thanks in advance

    Posted by rachel.nickells
    Hi guys,.
    I recently bought a Toshiba satellite click on mini, tried to use my external hard drive, but its does not at all. Any ideas on how to solve this problem?
    It is a Seagate 250 GB hard drive. Thanks in advance

    It is powered by usb? If yes the hard drive turning upward? There are the sounds of rattling of the reader?

  • Can I install Windows 7 on Satellite click Mini L9W - B and use the touch screen?

    Is it possible to install Win 7 32 bit on a satellite click and it will always work to use the screen in the form of tablets?
    I'll buy this one for my dental practice and the intraoral cam maintains that Win 7 32 bit.

    Are you sure that it will not work with Windows 7? Usually there are problems with the software XP and Windows 7/8, but if it works with Windows 7 there is a good chance that it will work with Windows 8. If the software is the issue that you may be able to run the program in compatibility mode Windows 7.

  • Pilot Windows 10 for Satellite click Mini L9W - B

    Hello!

    When about can we expect drivers for Windows 10 for Satellite click on mini? On the Toshiba Web page, I can only download drivers for Windows 8.1. That's why friends advised me to not install Windows 10 again. But how much time do we have to wait for Windows 10 pilots?

    Thank you very much!

    Hi Pete,.

    Keep an eye on this space.

    All drivers must be created and tested before Toshiba may make public, it is unfortunately a long and vigorous system, usually after a new operating system is released most of the products are made compatible within a year.

    Hope this helps,
    Z

  • Using both Ethernet and load Satellite click Mini L9W - B

    Hello

    Click mini had a micro USB port and a full size one on the keyboard

    I prefer ethernet wifi

    I have an adapter that converts ethernet USB mic, but then I can't load through the same socket.

    Is there an alternative?

    Thank you!

    not really.

    There is nothing wrong with wifi speeds, 54 Mbps is more that enough, if it's slow on wifi it isn't a problem with wifi.

  • Satellite click Mini L9W - B - lost after update Win 10 software

    Hello.

    I upgraded my Windows 10 click Mini as soon as I got it yesterday.

    Everything seemed fine until I restarted and it would not start, there was a problem with the drive of the declaration.

    Finally, after having used the keylogger to unlock the drive, I have reset the machine (asking to keep my files and it reinstalled Windows 10 but I seem to have lost Toshiba programs that were out there.)

    They do not appear in the list of programs.

    Is it possible to recover without restoring unity to Windows 8.1 in the recovery and then put back Win 10 on.
    Took hours.

    Thanks for any help.
    Doug

    If you have checked the option 'keep my files' Windows 10 would still remove applications and settings but it maintains your personal files, such as images, mp3, movies, docs, etc.

    Please check this:
    Limitations of the upgrade of Windows 10
    http://win10upgrade.Toshiba.com/swup...on=TEG&lang=en

    and here you find Toshiba Windows 10 upgrade information
    http://win10upgrade.Toshiba.com/swup...on=TEG&lang=en

  • Satellite click Mini L9W - b: Touchpad is reversed in Windows 10

    Hello

    I've updated my Mini click for Windows 10. I encountered a problem where sometimes my touchpad does not work correctly. Rather than make the pointer up and down when you are prompted, the pointer will go left and right. When you perform the movement to pass the pointer to the left and right, it goes up and down. To avoid the problem, I connect a mouse or use the touchscreen, but it is still quite annoying.

    After the click mini boot, this appears to be 50% of the time... I guess it's a software problem. Is there a solution? Is this a known issue?

    See you soon,.
    Karel

    Hello

    Windows 10 supports some additional features.

    Under settings-> tablet mode, you would find the POWER option in order to make Windows easier to hit when using the unit as a tablet.

    Check if this option is enabled.

  • Satellite click Mini L9W - B: loading new problem?

    Hi all

    I have some serious looking problems with my mini load click again (6 weeks) satellite.
    It seems to be a new addition to an already long list, but I had a glance at previous posts and has not found the same problem.

    The battery ran out a week ago and I've only connected last night to load all night (I was on vacation). This morning I tried to start and he won start t at all. The only thing it shows every 10 to 20 seconds (without touching the device) is the loading screen. I believe in the screen both batteries are empty, but the Tablet battery charge (now for 5 hours without a change in status). He still won t start when you press the power button.

    Someone had a similar problem? If my battery is just very deeply and patience will solve the problem? Other recommendations?

    The BIOS is upgraded to 1.7 since I had other questions charge described at the beginning and it seems to have fixed those at least.

    To be honest, I'm a bit fed up with it. I love really all the benefits of the device (size, detachment of the Tablet, connection USB etc.), but the list of problems is really a bit long

    I hope someone can help me. Thanks in advance.

    SAS

    I hope you solved this. I had the same thing. The problem seems to be that the unit is on and there is no enough power via mini usb to run and charge the batteries at the same time.

    The solution was to press the power button for 15 seconds to ensure a forced switch off then let it charge and check after a few hours of a short touch on the power button, is not enough to start. I hope you can see some charge in the battery of the screen.

  • Battery problems with the new Satellite click Mini

    Hi guys,.

    my camera is completely discharged which was quite annoying. So I rebooted the tablet to 100% and the keyboard battery was at the time, reading 100% load. Applied bios update 1.70, after startup, the keyboard battery showing 0%. Now it will not charge, the Tablet is 100% and Windows reports battery 2 loads but it remains at 0%.

    There is a sharp screeching electric from the keyboard dock? Would it be a bad battery? Or is it so deeply discharged it will not charge?

    Thanks in advance

    If the battery is deeply discharged, you must hold the power adapter plugged in for at least 24 hours...

    But the sharp wail of electric from the keyboard docking station seems really strange...
    I can imagine that there is some lose connection or a hardware problem...

    In any case, Tablet must be connected to the power adapter and docked to the docking keyboard while loading... Please also make sure that the Tablet is TURNED off (press and hold the button to turn off the Tablet 10-15 sec)

  • Charge time for Satellite click Mini L9W - B

    I have another question:

    I noticed that in the first 5 months, the charge time for my click satellite mini was about 6-8 hours for two batteries. Now, it takes much more time. Currently, he is responsible for 13.5 hours and the keyboard battery is not yet completely load (I'll post the exact end time later...).

    There may be a problem or is this normal? I mean that the charging time has almost doubled...

    Thanks in advance

    AFAIK battery reach optimal performance, after some time of use... This means that the battery must be charged and discharged several times to reach the best level... but it also means that the battery charge time would increase...

    So from my point of few, there is no reason to fear that something could be wrong with the battery... you know...

  • Satellite click Mini L9W - B cursor moves left to finish in the top left

    the cursor on my mini click, every now and then continues to move left at the top left end, this causes the typos. What is the cause? and how can I put it right.
    see you soon
    JO

    Try to clean the whole keyboard, maybe it can require a recalibration. I already had problems with the touchpad and removed additional drivers that came with it

  • Satellite click Mini L9W - B can download updated BIOS

    Hi guys,.

    I tried to update the Bios of my Satellite but I cannot download the new update of the Bios because the site ask me user and password to access FTP from Toshiba.

    In parts attached a screenshot of the message with the required access.

    If anyone can help me, I'll be very happy.

    Alessio Ludovici

    Hello

    Exactly the same problem...

    In addition, in the forum, you write about the version 1.60 and 1.70, but when I choose a Mini L9W - B click, I could (if I had a Login and a password) download version 5.0... It seems a huge gap between these versions...

    Thank you for your help,

    Michel

Maybe you are looking for