Satellite L10-202 begins after hibernation without opening the lid

Similar Questions

• Satellite U840W-10 t starts when you open the lid

  Hello world.

  I recently bought a U840w-10 t.

  I can solve a problem.
  When I stopped completely win8, I enabled in the BIOS and in the configuration of toshiba software the option this computer do not START with the opening of the SCREEN.

  But even with this option turned off, my laptop STILL BOOT to WINDOWS, simply open up the laptop, NOT by pressing the power button.

  I want to avoid that, because I noticed that when the laptop is on the bag, sometimes it STARTS by itself with a small vibration and milimetter opening of the screen.

  Does anyone have this problem?
  Toshiba is announced on this subject?

  Thanks in advance.

  Have a look here:
  [Why my laptop Windows 8 start automatically when you open the cover of the display? | http://APS2.Toshiba-tro.de/KB0/FAQ2C03FA0001R01.htm]

  + There are two possibilities. A stop of the hybrid were made in Windows 8 (default option) or "Open Panel - Power On" is activated. +

  + If one of these two functions is activated, the notebook starts up automatically when you open the cover of the display. To change it, disable hybrid closing mode or turn off the function "open Panel - Power On. +

• Satellite A200-27U not wakes up after hibernation when you open the lid

  I just bought a new Satellite A200 27U which goes a lot so far.
  However, I have configured in hibernation mode when I close the lid.

  I can't resume automatically hibernate when I open the lid.
  I have to press the power button.
  Is this normal, should resume automatically?

  If yes how to do it do?

  It is the same with my Satellite P200 and I think it's normal. It is the same on my second laptop preinstalled WXP.
  Putting into service is not automatically and after you open the laptop I have to press power button / stop too.
  But it is not so problematic. What do you think?

  You use Windows XP Home or Vista edition?

• Satellite L10-119 out of hibernation when moved...

  Hello

  I have a strange problem with my Satellite. He goes in and out of hibernation with no problems but when her hibernation and I want to move the laptop to put for example in my bag it comes suddenly from hibernation. She does this on a sign of mild shock, touch and movement. The problem is even more strange that it disappears when I plug the power - Hibernate the laptop's rock then stable and it is only started when I open the lid or press the power button.
  A that someone has experienced this problem? Hibernation is very useful and I can't enable on-the-go, as my computer starts to turn :(

  Thanks in advance for any help.

  I've never heard of this. I use the mode standby and hibernation on both of my books and if the screen cover is closed properly I can do whatever I want and turn around. The laptop is OFF. After opening the cover of the display unit turns on automatically.

  There is the same situation with sleep mode?

• Satellite L10-202: how to bring yellow pop up with the IP address?

  Hello
  I have the Satellite L10-202. When I bought it, it had already installed Windows XP Home. Of course, a few hours after I reinstall the software, but before I did I saw that when I plugged the computer to Internet/LAN by ethernet or WiFi NETWORK card there was yellow pop-up windows (sometimes called ball) with information which IP address, I received.

  Now, after the reinstallation, I only "information network connected.
  Anyone know how I can restore it? It is characteristic of some software on CD with the drivers or that certain configuration in operating system? It was very useful. I tried with almost all utilities on CD.

  Kind regards.

  Hello

  Maybe this helps:
  In the registry trying to change this entry:

  The key: NtVersion ntVersion\Explorer\Advanced

  Create a new DWORD value and name it EnableBalloonTips equal to 1.
  If EnableBalloonTips is already there and equal to 0, equal to 1.
  Quit the registry editor, log out and log in.

• Impossible to activate the card wireless network on Satellite L10-202

  Hello

  I have a portable Satellite L10 that comes without WLAN.
  I bought and installed an Intel pro wireless 2200BG card on the MiniPCi slot. I have also installed and connected the mini-antennes.

  The device is activated but does not connect. I installed ConfigFree and the result was: "status of Communication Wireless: OFF." Switch where the arrow is pointing. "My laptop does not have this button, a plastic cap is here.

  Also, the combination FN + F8 does nothing.
  How can I solve this problem?
  How can I put it ON without having this button?

  Thank you.

  Hello, Lucy

  I tried to find the hardware configuration of your Satellite L10 202 (PSL10E) and now I'm complete confused now. I didn t find any information that this model of phone is upgradable WIFI and I do not understand that antenna WLAN is here.

  Anyway, is recognized WLAN antenna correctly in Device Manager?

• Satellite L30-115 returns after hibernation too early

  Satellite L30-115.
  The lid switch opens even slight movements (with the lid closed). What makes my book out of hibernation.

  Energy saver, I put to enter the Hibernate when I press the power button and do nothing when I close the lid. So I expect to do nothing when I opened the lid, too.
  The laptop still exists, after hibernation.

  Is this a bug in the BIOS, normal behavior, is there a place to put not to resume when I open the lid? BIOS and energy savings are updated recently.

  Thank you
  Dan

  When the lid is closed the small switch will activate and laptop knows what lid are closed. Light moves this contact will be interruption and laptop think the lid is open. Because of this, your mobile PC wakes up from hibernation mode.

  A few minutes ago I tested how reacts a Satellite phone and also my new Vista preinstalled Satellite P200D preinstalled old WXP. I did the same settings that you are, and the result is the same. After the opening of the notebooks of the lid to wake up from hibernation mode.

• Mini WiFi PCI on Satellite L10-202

  Well, that's the problem - the computer is compatible wi - fi laptop? i.e. that my laptop has no antenna internal for the wireless card? because I don't see one when I remove my cover mini pci. When I installed the wireless 2200BG card intel (pro) it it has detected and installed but its signal was very weak. at the point where the distance between the access point pushes the connection is lost. my laptop has even an external button to activate wifi card that works for this card intel.
  The issue is always made my satellite L10 202 has a antenna internal wireless card mini pci
  the model number is PSL10E - 01P00DG3

  Hello

  Miro is quite right.
  I have goggled and found the same info as wireless LAN / Wi - Fi is certainly not available on this device. :(

  Best regards

• How to turn off the wake-up upward after hibernation when I open the lid?

  I've set up the power button to hibernate your laptop.

  After pressing the button and wait some time to complete the process of hibernation, I close the lid.
  But when I opened the lid to examine, for example, battery charge indicator, laptop wakes up.

  Very annoying. How to disable?

  Why boring. I presume that you n t open the cover for nothing jut so you want to work with your laptop.

  If you see options for standby power, you will see that the option says: when I press the power button. When I open the cover, there is no option called.

  Sorry, but I think that there is nothing to do.

  By the way: in another topic ask you on the eve of power feature. Have you found a solution?

• Re: upgrade memory on Satellite L10-202

  What kind of memory, specific to SATELLITE L10 - 202 (part number i.e.Toshiba or equivalent), I should use on the operation upgrade up to 1 GB memory?

  Hello

  Just short info for you: according to the specifications of your laptop can handle with max 1 GB of RAM. The compatible memory modules are:
  PC2700 256 MB (PA3311U - 1 M 25)
  PC2700 512 MB (PA3312U - 1 M 51)

  Good bye

• Satellite L10-202 & Creative Audigy ZS PCMCIA Notebook2 - does not work

  Hello!

  I bought Notebook Audigy 2 PCMCIA yesterday and I have a big problem. My laptop Toshiba Satellite L10-202 (Celeron M 1.6, 512 DDR, PCCARD II with Texas Instruments PCCARD controller 1410) does not detect the card Audigy.

  What should I do to solve my problem? I have a pcmcia controller update?

  Help me, please... I don't know what I have to do...

  Kuba

  Hello

  I don't know if an update of the PCMCIA controller will help solve this problem of m.
  I think you should first check some settings in the BIOS. There should be a configuration of device option. Here, you can switch to Setup OS or all devices.
  If it has been set for all devices, you will be able to change the PC Card controller mode.

  Check it out.

• This module memory for Satellite L10 202

  Hello
  I have computer laptop toshiba satellite L10 202.
  I have 256 MB of ram installed. I would like to add an another 512 MB of ram. Could you tell me which modules of memory can I use with this model?
  Also, I would like to know which manufacturer do you recommend?
  Thanks in advance
  Bartosz Bielecki

  You can visit the Toshiba site:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ONLINE_SHOP

  or your order that modules are the Toshiba ASP in your country.

• How do I know if my iPhone facetime without opening the box (iPhone OS)

  How know if my iPhone's facetime without opening the box

  Buy a phone from an authoritative source outside of the Middle East.

• Is there a way to stop the countdown rehearsal before she goes off without open the alarm app and turning works?

  Is there a way to stop the countdown rehearsal before she goes off without open the alarm app and turning works? Basically, if I'm ready to get up and there are 4 minutes remaining on the countdown of repetition which is the fastest way to 'Cancel' the snooze and alarm?

  There isn't a way, I discovered that allows me to do without invoking the alarm and the alarm clearing application

• How can I display an email address without opening the email?

  How can I display an email address without opening the email?  I want to know who sent me spam so I can block it without opening the email.

  There is no danger at the opening of the long spam email that you do not click on any links in the email.