Satellite L300: Failed to retrieve - unexpected i/o error has occurred

Similar Questions

• Satellite U300: "an unexpected i/o error has occurred."

  Hello

  My newly purchased U300 worked fine, today would not start and is now indicating that an unexpected i/o error has occurred, with a code of 0xc00000e9

  The message preceding that States that this may be due to recently responsible for hardware or software. Not apply.

  Any help appreciated, thanks

  Janie

  Hello

  These errors are often errors in registry. Could be caused by some software disk cleanup or somehing else who has access to the registry system´s.

  The only option is to fix the system with an original disc of Windows Vista. If you don t have such a, then you will recover you the system because your registry database cannot be recovered, and the system must be completely replaced.

  If you do not already have: backup your personal data... That's all

  Greetings

• Unexpected i/o error has occurred

  Just got a laptop from a friend that he trampled during the move.
  The detection area is a small little shriveled up, very little.

  I turn it on and load the Toshiba screen, then when trying to load Windows right after the Toshiba screen it goes blank for about 20 seconds and it appears.

  + Unexpected i/o error has occurred.
  http://img502.imageshack.us/img502/6388/dsc01098l.jpg

  Is it just a matter of getting a new hard drive? Or the motherboard could be poached as well?

  Hello

  If you don t have a CD/DVD drive and then I'd forget all this tests
  You need the CD/DVD drive to reinstall the OS again if you have the bootable CD.

  If your computer supports USB booting, then you could try to reinstall Win XP from bootable USB drive flash.

  For that check out this tutorial:
  http://www.jcmiras.NET/surge/P96.htm

  Welcome them

• 0xc00000e9 error "an unexpected i/o error has occurred."

  UNLIKE ANYTHING I'VE SEEN IN THIS FORUM!  Help!

  Hi all!  I am working on a Toshiba Windows Vista 64 - bit laptop and I'm having an experience somewhat similar, as some people have had here as well.  The computer never starts past the Toshiba screen opening.  All I get is the black screen with the blinking cursor.  I tried F8 for safe mode, but nothing helped.  I can access the Setup (F2), but it's really of no use for me in this situation.  I downloaded the Windows Vista Recovery Essentials of NeoSmart Technologies, but after running for several minutes just to load the files, all I get is a screen telling me that "an unexpected i/o error has occurred", and I get this code: 0xc00000e9.  It also says it might be a problem with the hard drive or the CD.  I also tried Ultimate Boot CD which allowed me to analyze the hard disk to find errors, but the machine turns off after a period of time.  Nothing in these forums seem to apply to my problem because I can't go to the Windows Vista logo screen, so try to reach the system restore, command prompt or anything ELSE is impossible because I can't go to the black screen with the blinking cursor.  Can someone help me solve this problem?  Any help is welcome!  Thank you!!!
  Edit:
  OK, after the execution of Windows Vista Recovery Essentials, here is my screen error black verbatim:

  Windows has encountered a problem communicating with a device connected to your computer.

  
  

  This error can be caused by unplugging a removable storage device, such as a USB external drive when the appliance is used, or by faulty hardware such as a hard drive or the CD-ROM drive which is a failure.  Make sure that all removable storage is properly connected, and then restart your computer.

  
  

  If you continue to receive this error message, contact the manufacturer of the equipment.

  
  

  
  

  Status: 0xc00000e9

  
  

  Info: An unexpected i/o error has occurred.

  
  

  
  

  Any ideas anyone?   Thanks in advance.

  Hi Stotten,

  This problem occurs because you cannot start the computer with a hard drive. The error message refers to a material error in the BIOS of your computer.

  If you have any attached external devices, then unplug the device and check if it helps.

  If you have no external device connected to your computer, then it might be some conflicting drivers.  You will have to perhaps remove sound card etc in BIOS and check.

  You must also update the BIOS with the latest settings.

  You will need to contact the manufacturer of your computer for more information about how to reset the BIOS settings.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• Unexpected i/o error has occurred. Status: 0xc00000e9 setting from the Setup program

  Please, I have a Toshiba labtop, what sudenly accident and it does not open windows, this message appears at the beginning upward: unexpected i/o error has occurred. Status: 0xc00000e9

  Hello

  The error - an unexpected i/o error has occurred, status: (0Xc00000e9) is a material error in the BIOS of your computer. Basically
  It is tell you that the computer is not able to communicate effectively with the hard drive.

  Try the Startup Repair. Startup Repair is designed to prevent a time-consuming reinstallation of diagnosis and repair of problems which
  prevent Windows to start. Introduced in Windows Vista, startup repair is even easier to use, because Windows 7 now installs on your
  hard drive for you.

  See the links below for more details:

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  I also suggest you to update the BIOS. Update the BIOS, contact the manufacturer of the system!

  Note: Changing the BIOS settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot
  guarantee that problems resulting from the configuration of the BIOS settings can resolved e. Changes to settings are at your own risk

• An unexpected i/o error has occurred to Oxc00000e9

  A few days I'll I've reinstalled my windows 7 on my PC. After 3 days I have had this error. I ssd and hdd connected and I installed the windows on the SDS. I checked the hdd and ssd health and it is said in good health

  This error can be caused by unplugging a removable storage device, such as a USB external drive when the appliance is used, or by faulty hardware such as a hard drive or the CD-ROM drive which is a failure. Make sure that all removable storage is properly connected, and then restart your computer.

  If you continue to receive this error message, contact the manufacturer of the equipment.

  Status: Oxc00000e9

  Info: An unexpected i/o error has occurred.

  Press ENTER to select the OS

  I press on enter and start the windows. Also, this error has another problem with him. Sometimes after I press the turnon button my PC shutsdown until it self before the windows logo

  Hello

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the question and your efforts to resolve.

  This problem may occur to corrupt Windows files or if the BIOS is not updated. This can also be caused by a hardware problem.

  Please see suggestions of Afzal Taher responded on December 30, 2009 and check if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/all/new-computer-running-Windows-7-unexpected-IO-error/46b4fc7a-9a83-4db2-9a00-dca512797e61

  Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• CS6 LR does not start, gives 2 error messages: internal error (failed to create the develop Presets; error has occurred the attempt to change the modules.

  I am running Yosemite (OS 10.10.5). Trying to open 6 LR, I get two error messages. (1) an internal error has occurred. Could not create the required folder: / Users/username/Library/Application Support / Adobe / Lightroom / develop Presets. (2) an error occurred when attempting to change modules.

  When I tried LR 5 running on the previous system, I got the same error module changing, but cannot find anything on the Adobe site and thought that maybe the program was not compatible with the system. But here again the same problem. I really want to stop using the old computer with LR 3 and use the updates, I bought.

  Hi Benjamin,

  You must change the permissions of the folder Adobe in two libraries.

  Browse to the location: ~/Library/Application Support/Adobe

  / Library/Application Support/Adobe

  CMD + click on the Adobe folder

  Click on Get Info

  Click the Permission & sharing

  Click on the padlock

  Unlock it

  Change the permissions of writing & for all users.

  Check the link and try the Solution 5: error changing modules

  Let us know if it helps.

  ~ Mohit

• Update iOS 9.3.5 failed on iPad. Now unable to update or restore to factory presets. "An unknown error has occurred (52).

  I tried to update my iPad for iOS 9.3.4 iOS 9.3.5 directly since the latest version of iTunes on Macbook Pro running the latest update of El Capitan. I tried the update of the iPad without iTunes, but he failed and showed the photo to connect to iTunes.

  The update failed to halfway through (don't remember the exact message) so I unplugged the iPad, restarted iTunes, and tried the update, but the update constantly fails with the message "an unknown error has occurred (52). I also tried via iTunes on my iMac running Yosemite, but has not as well.

  I did all the things listed here:

  https://support.Apple.com/en-us/HT201210

  The iPad was working fine before the update attempt.

  Is there than anything left to try? This iOS update broken my iPad?

  Have you tried to put the iPad into recovery mode?

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

• VPN connection: An unexpected error has occurred.

  I am suddenly unable to get my built-in VPN connection works on my iMac with OS X 10.11.5.  I get the VPN connection message: an unexpected error has occurred.  I have been using this VPN configuration to connect to work for several months with success.

  But last week (and I do not know if it had nothing to do with it), I went on vacation and used a free wi - fi setup of Tim Hortons.  I had a LOT of trouble getting the next login page, and I checked all playing with different settings of network without success.  When a change did not work, I put it to its original setting.  Finally, I learned to use Safari to access the free WiFi connection page of Tim.  Then once connected, everything was OK.

  But when I returned a week later and if necessary, to start my VPN connection to access the work, it wouldn't start.  I checked and recheck all my settings preferably of different network, but did not find those who were wrong.  I even deleted and re-entered my VPN service definition without solving the problem.

  Thinking that the problem could be the newly installed ISP of Bell equipment (we went from Rogers while I was away), I used my BlackBerry smartphone (issued by my employer) to create a wi - fi hotspot and accessed to the internet using this connection which completely ignored my home ISP equipment.  But still, I was unable to establish a VPN connection.

  I then tried my iPad VPN connection, and it worked!  Then, I defined a VPN service on the iMac to my wife and the iMac to my daughter and was able to successfully establish a VPN connection to my work very well, using exactly the same VPN configuration.  This led me to the conclusion, it was a problem on my iMac (and not with my new ISP or VPN system of my work that had none of the changes you made), but I still can't find what is "broken".  I run Onyx for my iMac OS X 10.11.5 and repaired permissions and clean the cache and all the rest she is doing to "solve" problems.  But the problem persisted.

  Is there a preference file corrupted somewhere (scan option is no longer on the current version of the Onyx for a reason any)?

  I still have a network setting wrong somewhere I need to go back to the system is correct value?

  Here is the attempt to VPN from the file system.log (with some hidden values in the case where they display my work VPN access):

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: received an order to start SystemUIServer [257]

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: changed to connecting status

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: IPSec connection to server nnn.nnn.n.n

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: phase 1 of the IPSec from.

  26 June at 16:13:48 Myrons-iMac raccoon [520]: agreed to the takeover of vpn connection.

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IPSec connection to server nnn.nnn.n.n

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: connection.

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IPSec Phase 1 started (initiated by me).

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: bind 1 (cannot assign requested address)

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: sendfromto failed

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: Phase 1 negotiation failed due to the error of sending. 94437eb7d5b1b6e8:0000000000000000

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: can not send packets

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IKE Packet: send failed. (Initiator, aggressive Mode 1 Message).

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: Controller IPSec: IKE FAILED. Phase 1, assert 0

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: status changed by disconnecting

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: IPSec disconnection from the server 142.201.5.6

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IPSec disconnection from the server nnn.nnn.n.n

  26 June at 16:13:48 - last message repeated 3 times-

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: status changed to offline, terminus right no

  Any help or insight would be more useful and appreciated... so that I can work from home again.

  Thank you

  Myron VanderLaan

  I finally found my VPN problem.

  There is a 'racoon' file that is generated when I connect to the VPN to my work site.

  I have created a modified version of this file so that my connection does not expire in 3600 seconds (changed in 24 hours).

  Apparently, there are some slightly different settings (such as certain IP addresses other than VPN IP of my work) in this file under our new ISP Bell from the former FAI Rogers.

  And if I connect to the WiFi Hotspot from my BlackBerry, it does not once again because these settings in the file are different again.  I must return the file generated instead of my modified file.

  Bad luck!

• Status: Unexpected error has occurred. The timeout of waiting for an answer UVSC error internal

  Work with labview ARM and it was working fine this morning.  I went to run a program and the build failed with the following message.

  [13: 34:50] status: error
  An unexpected error has occurred.

  [Source: the timeout of waiting for an answer]

  Internal error UVSC

  Detail: [UVSC_PRJ_LOAD, MSG: 0x1000, STATUS:]
  [0x1] code: 1]

  Did normal things as restart the computer.  Plug and unplug the Board of Directors of the computer.

  I tried to reinstall the whole arm labview and it does not work.

  Even from labview so you go to tools > ARM > show keil does not work either.  I can open keil in itself, but it doesn't seem to be communicating with labview.

  Figured it out.  Somehow the projects I was working on has been corrupted somehow.  After another reinstalled, I opened a sample project, not one of the many that are mine, and it worked.  I had copy and past the code on the project and in a new, but it works.  Don't know how my projects I screwed up in the middle of work on them.

  Now, back to actually do the work.

• Cannot run Microsoft FIXIT error: "an unexpected error has occurred.

  Title: Microsoft Fix it fails

  Hello

  Whenever I try to run Microsoft Fix it, I get an error message saying something like "an unexpected error has occurred.  The fix that it Wizard cannot continue. "I used to see if the Fix, it would help solve the problem of update that take place on this Dell Inspiron laptop running Windows Vista 32-bit Service Pack 1 with Norton 360.  I thought that I had made progress on the issue of the update, but now they are all fail during installation, including Service Pack 2.
  The Dell PC Checkup shows as operating without any problems portable equipment.
  Thanks for any help that can be offered.
  Kind regards
  Roxy111

  Hello

  -What is the FIXIT you have tried to solve this problem?
  -Do you have problems with the installation of the Windows updates?
  -You receive an error message while trying to install updates?
  -You are aware of any changes made on the computer before this problem?
   
  Step 1: I suggest you to see the link below and cehck if the problem persists.
  FIXIT solution Center
  http://fixitcenter.support.Microsoft.com/portal/FindSolutions
   
  Step 2: File system (CFS) Checker

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  (a) click Startand type cmd in the box start the search.

  (b) right click on cmd in the programs list and then click run as administrator.

  If you are prompted for an administrator password or confirmation, type your password or click on continue

  (c) for the command prompts, the following line and press ENTER:

  sfc/scannow

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7?

  http://support.Microsoft.com/kb/929833

   
  Step 3: Clean boot

  I suggest to maintain the computer in clean boot mode and check if the problem still persists. A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:
  http://support.Microsoft.com/kb/929135
  Note: After the troubleshooting steps, see the link to start to set up the computer in normal clean startup mode.

  For reference:
  Information about Service Pack 2 for Windows Vista and Windows Server 2008
  http://support.Microsoft.com/kb/948465
   
  Hope this information helps.

• None of my troubleshooting services work "an unexpected error has occurred and the convenience store could not be started" 0x8007045A error

  I can't use my convenience store. I can't even connect to the internet on the internet wireless network card. It says "an error occurred during the loading of the troubleshooting tool: an unexpected error has occurred." the Troubleshooting Wizard can not continue. 0x8007045A error code. Please help me. How can I fix it

  Hello Max,.

  Thanks for posting your query on Microsoft Community forum.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. You did it all change (hardware or software) before the show?
  2. You receive error message when running the troubleshooter from network?

  0x8007045A error Codes are caused by files system badly configured in your windows operating system. It is format of common error code used by windows and other software compatible windows and driver vendors.

  There may be a lot of events which may have led to file system errors. An incomplete installation, an incomplete uninstallation, incorrect removal applications or equipment. It can also be caused if your computer is retrieved from an attack of the adware/spyware or virus or by an abnormal shutdown of the computer. All assets that the above may result in the deletion or corruption of entries in the windows system files. This corrupted system file will cause information missing and wrong linked and files needed for the proper functioning of the application.

  Try it out below mentioned steps and check if it helps.

  Method 1:

  Update or reinstall the Microsoft XML parser

  To download the latest XML parser, visit the following Microsoft Web site:

  http://msdn2.Microsoft.com/en-us/XML/bb190622.aspx

  (http://msdn2.microsoft.com/en-us/xml/bb190622.aspx)

  Method 2:

  Replace corrupted files

  To resolve this issue, follow these steps:

  1. Copy the following DLL files in the C:\WINDOWS\SYSTEM folder on a computer that runs on the computer that is experiencing the problem:
  • Msxml3.dll
  • Msxml3a.dll
  • Msxml3r.dll

  2. after replacing the files, you must save the files. To save the files, follow these steps:

  1. Click Startand then click run
  2. In the Open box, type REGSVR32 C:\WINDOWS\SYSTEM\MSXML. DLLand then click OK. You receive a message when the registration is successful.
  3. Repeat steps a and b with the following files:
  • C:\WINDOWS\SYSTEM\MSXML2. DLL
  • C:\WINDOWS\SYSTEM\MSXML3. DLL

  4 restart your computer.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• Time capsule, an unexpected error has occurred

  Hello everyone, I am having trouble with my Time Machine for a month or two. He was unable to make a back-up, even if the light was green all the time. Now, today I tried to set up again as before, but each time an EEG this message: an unexpected error has occurred. Try again.

  I did: a hard reset, soft reset and close my modem with every single device connected to it.

  I use a 2011 Macbook Air (on OSX El Capitan) and the fourth generation time Capsule.

  Thanks in advance.

  You have an adapter Thunderbolt-to-Ethernet for the MacBook Air?

  If so, you can use that to set up a wired connection to the Mac to one of the three LAN <>- ports on the time Capsule to see if a direct connection work better than wireless to try to set up the Capsule time again.

  If you do not have this card, you should really consider to buy one, because it will be useful when you want to have a wired connection much more quickly from your Mac to the time Capsule.

  Maid in Gigabit Ethernet Adapter - Apple

  If you do not have the card, or do not have one, then we can try to change a setting on your Mac to see if it can help with connection problems. After the back if you want to try this.

• An unexpected error has occurred - Apple tvOS 9.2

  Since my Apple TV 4 Gen tvOS 9.2 update, I have problems w / playing some movies I have purchased through iTunes. Get "an unexpected error has occurred" and an ignore"" button. The titles of films even play fine on my Macbook, iPhone and Windows PC. Replaced my Apple TV 4 material during the weekend but the problem persists with the replacement unit. Contact Apple Support confirmed reports addtl of the problem and how it could be related to a recent change in the backend to the iTunes store. Help w / titles problematic movies. If anyone knows the same thing, support both want to hear from you.

  Have the same problem
  bought nine ATV4

  Do not play anything on the account

  Does not buy new movies

  "Unexpected error".

• I can't sign my icloud account saying verification failed and an unknown error has occurred please help

  I can't sign on my icloud account, saying: "check failed and an unknown error has occurred."

  Hello buchionunwor,

  Thank you for using communities of Apple Support.

  I see that you are having problems connecting to your iCloud account. The following article provides basic troubleshooting for problems with your iCloud account.

  iCloud: Troubleshooting account

  Best regards.