Satellite L300 - how to use and install Bluetooth?

Similar Questions

• How do I uninstall Satellite L300 - 11 q Vista and install Windows XP

  Hello!

  Please help: How do I uninstall Windows Vista from my laptop and install Windows XP?
  Should I do something with discs and seized BIOS, or I can just format C drive and then install XP CD-drive?

  How can I make a recovery disk before you uninstall Vista?

  Thank you very much!

  Hello

  It's very easy if you want to get rid of Vista simply boot from the Windows XP CD, format the HARD drive and install XP on partition C instead of Vista.
  That s it.

  I put t know what laptop have you but the laptop most recent are equipped with the SATA controller and the SATA driver must be installed or included in the CD of Win XP to install XP on the HARD drive. The SATA driver is part of the Manger of Intel Matrix Storage, which can be downloaded from the Intel site or page of the Toshiba driver.

  Just FYI; in this forum, you can find a lot of details in the various messages on the Intel storage Manger. Just use the search option.

  Good bye

• Satellite L300 - how to use the webcam?

  This is a stupid situation:

  -My girlfriend use a Toshiba Satellite L300 laptop.
  -When Skype-ing with me, she changed out somehow built in camera
  -J' I try to help him, but I can't find the key combination in the user manual...

  PLEASE, I BEG YOU! Help!

  Hello!

  You should ask your girlfriend how she did that. This makes it easier. ;)

  In addition, it would be interesting to know if the webcam is listed correctly in the Manager of the Age. You can check this?
  Maybe reinstall Skype and webcam driver could be useful.

  Good bye

• Satellite L300: How to use a partition of data for my documents

  Hello

  the Sat L300 160 GB hard drive is partitioned into vista and data.
  I want to save a large number of photos in my documents, which is on the part of vista.
  This example uses only half of the road.

  How to use the data for my documents component? TIA

  Hello

  You can make a folder on the second partition, and can store the necessary files (documents, photos) in specific files.

  Or maybe you want to decrease the Vista partition?

• Satellite L100 - how to download and install the update to the BIOS?

  I bought this Satellite L100 in 2006, and it occurred to me that, now, I might need a updated BIOS (laptop computer sometimes freezes at startup).

  I found an update on the site Web of the Satellite from July 6, 2007, but download instructions are confusing and the driver do not just come through. Can someone help me with another link for this download?

  Hello

  Normally, if the computer crashes to the screen Toshiba menas there is a problem with the detection of the material on the laptop. Maybe the HARD drive won't be recognized correctly or something else. I put t know because I m not a technician for computer laptop, but you can test the laptop without HARD drive if it crashes again on the Toshiba screen.

  But a BIOS can't solve this problem. I think the best way would be if you contact an authorized service provider. Technicians can verify the complete laptop computer hardware.

• I would like to know how to download and install a trial version of the stand-alone version of Lightroom, without the use of the cloud.

  I would like to know how to download and install a trial version of the stand-alone version of Lightroom, without the use of the cloud.

  For some reason, since I work for most of my time in the areas where it is very difficult if not impossible to have access to the internet, I would like to have a standalone version of Lightroom to work on a photo library on my Mac HARD drive.

  The only option that I find on the Adobe site, try first to install CC.

  I'll be grateful for any help.

  Gianluigi

  Kindly try to Install Photoshop Lightroom from here.

• Satellite L300 - no vertex shader and material & t on XP

  Hello

  I have my Satellite L300 - 11G 1 year and now I keep getting screens well blue of death (BSOD). I thought that his problem of RAM, and I used the memory diagnostic tools and no problem with the RAM.

  I try to install another driver for Intel GM965 chipset, it gives me error saying "this material is not meet your system requirements" or something like that so I went to the website that is provided by intel [files\systemrequirementslab | http://systemrequirementslab.com], you can test the games that you can run on your computer, and there I was shocked! When I saw

  Required that you have
  Hardware T&L Yes No
  Vertex Shader version 3.0 0.0

  who's who? I thought that my graphics card does not support Vertex shader. I opened WINDOWS 7 with the same computer... Shocked again!
  Required that you have
  Hardware T&L Yes Yes
  Vertex Shader version 3.0 4.0

  Windows 7 my pixel shader and vertex shader = 4.0, Hardawre T & L = Yes
  Under windows XP my pixel shader = 3.0, shader vertex = 0.0 and hardware T & L = NO
  I NEED solution here is my description of the computer: -.

  RAM DDR2 2 GB
  VGA card mobile express chipset intel GM965 256 up to 358
  Bicoeur T2370 1.73 GHz processor

  How do on XP as if was on Win 7

  Hey Buddy,

  First of all, you can t have Pixel and Vertex shader 4.0 on XP! Windows XP supports only to competition only on DirectX 10 and DirectX 9 .0c or more possible to use shader 4.0 s and therefore you need Vista or Windows 7!
  So I think everything is ok and don t forget you don t have a high-end gaming laptop. That's why you should buy a new one, a Qosmio series for example.

  > I try to install another driver for Intel GM965 chipset, it gives me error saying "this material is not meet your system requirements.
  I had the same problem and the solution was simple: just install manual chipset driver through the Device Manager where you can choose the driver directory (Advanced installation).
  Check it!

• How to use an install.xpi configuration file to configure email data

  Manual installation of my e-mail account failed because Thunderbird search my domain name and is not in its database. If my webhost gave me a file of automatic configuration for Thunderbird for my e-mail, called install.xpi - account but how to use this file? I can't double-click them in Windows to do anything. Thunderbird program, he wants to create a new account, but I can't do anything else in it as importing files.

  How to use the install.xpi file so it creates my e-mail account with the appropriate configuration variables? Thanks for your help.

  Launch Thunderbird, close the wizard, goto the Add-ons, select Tools menu (alt + T)

  There is a small button to the left of the search window. Click this button and select install module file and navigate to your xpi file, select it and you leave.

• How to: Use Smart install wireless install your Laserjet on Windows 7

  Some HP Laserjet printers have Smart Install. This allows you quickly connect the printer USB cable and start the installation. In this way a CD or a CD player is not necessary to install your device. Once the installation program appears you can proceed through the installation. The following video demonstrates how to use Smart Install to install your laserjet on a wireless network.

  Smart Install of Windows 7 - HP LaserJet P1102w wireless

  I hope that the information and the video above helps. If anyone has a problem or has any questions, feel free to ask. I'm more than happy to help.

• How to compile and install the kernel modules after nation and nipalk for installation of Gentoo 64 bit?

  We are trying to install a PCIe 6251 DAQ card in a box of Gentoo 64 bit running Linux kernel 2.6.28 - gentoo-r5 4.3.2 - gcc and glibc - 2.8.  We have installed RPM utilities to manage the installation.  The current problem is that we are not able to compile and install the kernel modules: nidmxfk, nimsdrk, nimstsk and nipxirmk.  Here's a summary of what we have done so far, and to what extent we got.

  First of all, we have changed the configuration of the kernel that we could export the init_mm unused symbol by changing the configuration option of the CONFIG_UNUSED_SYMBOLS = o kernel and recompile the kernel.  Then we installed LabView 8.6.1.  Then we ran the nation 1.9 installer who has installed the source code in vain on the compilation.  To resolve this problem, we have changed the function of pte_offset to pte_offset_kernel by editing the file/usr/local/natinst/nation/configures following the instructions here:

  http://decibel.NI.com/content/docs/doc-4511

  We were then able to compile and install the kernel nation module thanks to:

  . / configure
  do
  make install

  lsmod said that nation has been properly installed.  Then we ran the installer for DAQmx 8.0.1 by:

  . / INSTALL - nodeps

  To do this, we have received errors indicating that LabView support could not be installed because check addictive (incorrectly we think) stated that labviewbase86 has not been installed; This caused the installer to have an abortion.  Therefore, we refused to install support for LabView 8.6 and revived the installation program which produces the output:

  Installation of the driver NOR-DAQmx Distribution of Linux Installer version 8.0.1f0...

  Already to jump Edward - 1.9.0 - f0.noarch.rpm installation, same or newer
  installed.

  Pre Installation...

  Preparing... ########################################### [100%]
  1:nitimingi ########################################### [ 4%]
  2:nipalki ########################################### [ 7%]
  3:nipali ########################################### [ 11%]
  RC0.d directory not found, startup script is not accredited with init levels.
  4:labview80 - rte # [14%]
  5:ni653x ########################################### [ 18%]
  6:nicdigi ########################################### [ 21%]
  7:nidaqmxcapiexmp # [25%]
  8:nidaqmxcapihelp # [29%]
  9:nidaqmxcapii # [32%]
  LN: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory
  10:nidaqmxcfgi # [36%]
  11:nidaqmxef # [39%]
  12:nidaqmxhelp # [43%]
  13:nidaqmxinfi # [46%]
  14:nidaqmxswitch # [50%]
  15:nidimi ########################################### [ 54%]
  16:nidsai ########################################### [ 57%]
  17:nimdbgi ########################################### [ 61%]
  18:nimioi ########################################### [ 64%]
  19:nimru2i ########################################### [ 68%]
  20:nimxdfi ########################################### [ 71%]
  21:nimxpi ########################################### [ 75%]
  22:nimxs ########################################### [ 79%]
  RC0.d directory not found, startup script is not accredited with init levels.
  23:niorbi ########################################### [ 82%]
  24:nipxirmi ########################################### [ 86%]
  25:nirpci ########################################### [ 89%]
  26:niscarabmm # [93%]
  27:niscxi ########################################### [ 96%]
  28:nistci ########################################### [100%]

  After Installation...

  At this point, after reading this report, we used the Gentoo rc update utility to add several scripts for the boot runlevel initialisation:

  update of RC - a boot nipple
  update of RC - a bunch of nipxirmu
  update of RC - a bunch of mxssvr
  update of RC - a bunch of nisvcloc
  update of RC - a bunch of nidevldu

  When the computer reboots, you get an error message indicating that the following kernel modules are not: nidmxfk, nimsdrk, nimstsk and nipxirmk.  lsmod shows that the nation and nipalk are installed, but no other kernel modules NOR are present.  modprobe-l shows that only nation and nipalk are available.

  So we have several questions:

  1. we install drivers in the correct order?  Should use us NI-VISA 4.5 or NOR-488. 2 rather than DAQmx 8.0.1?

  2. What kernel modules should be loaded for this equipment run?  How to compile and install the ones that we have yet, specifically nidmxfk, nimsdrk, nimstsk and nipxirmk?  Are there others?

  3. How can we get the installer to properly recognize that we have installed LabView Core and install support for LabView?  Are there additional kernel modules related to the support of LabView?

  4. What is the symbolic link that was not created in the DAQmx installation report? (ln: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory)?

  I apologize for so many questions, but these seem to be the last obstacles to obtaining OR runs correctly on this system.  Is there other information that we can provide that would be useful?  Thanks for any help or suggestions you can offer.

  Craig

  Hey Craig,.

  Given that you use 64-bit Linux all kernel modules must be compiled for 64 - bit.  User mode binaries can be 32-bit, assuming that you have installed the 32-bit support libraries.

  NOR-DAQmx is a complex architecture and requires several kernel modules to support your PCIe card.  Most of these kernel modules have not been brought to support 64-bit Linux.  Some kernel modules are components infrustructure that are shared with other pilots OR as NI-VISA and NOR-488. 2 and have been brought to support 64-bit Linux.  Unfortunately, you need all the modules to use your hardware.

  I hope that answers your question.

  Shawn Bohrer

  National Instruments

• How to download and install software animation for xp

  I like the animation I want softwares for animations and also I want to know how to download and install

  Hello

  To help you better, please answer this question.

  Looking for a particular animation software?

  You can use your favorite search engine to download and locate the animation for Windows operating system software.

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

• How to download and install on another computer without internet connection?

  I have an old computer with windows XP Home Edition. How to download and install on another computer without internet connection?  Files such as DirectX, real player, Media Player.  What I find it just download and install the file must then go to the internet.

  The following site may be worth a visit:

  Microsoft Download Center
  http://www.Microsoft.com/download/en/Search.aspx?p=0&r=10&t=&s=availabledate ~ Descending true... some files are simply web installers, but if you continue
  the research you should be able to find the full downloads. You can
  Talk about the size of the file if you get the full download.

  For Microsoft files... it can help search for developer files
  or redistributable.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Use DirectX Runtimes (June 2010)
  http://www.Microsoft.com/download/en/details.aspx?ID=8109

  RealPlayer
  http://www.filehippo.com/download_realplayer/

  Windows Media Player 11 for Windows XP
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=8163

• How to get and install the file txtsetup.oem for xp

  need to know how to get and install the txtsetup.oem file to install xp

  Hello

  The easiest way would be to visit the website of the manufacturer of the motherboard. This would normally have downloads for any RAID drivers required for the loading of Windows XP. The download can be an "executable" who writes a disk for you. It can be also something like a zip file with all files inside that must be extracted and copied to a floppy disk.

  If your PC is not a floppy drive, life becomes quite complicated.

  Please mark this as useful or response if applicable.

  Tricky

• How to download and install outlook express for free

  How to download and install outlook express for free

  You do not have. OE has never been a stand-alone email client. You are asking this in a XP forum. You have XP? If you do, you have Outlook Express. If you are using XP, what is your problem with OE?

  If you do not OE, maybe this will help.

  Right click on the desktop | New | Shortcut. Go to the * c:\program files\outlook express\msimn.exe *. Click next | Click Finish.  It will be a new shortcut on the desktop.

• How to check and install the drivers for the card

  I wanted to play the game with my HP Compaq 8710p (Windows 7) and said that my video card driver and probably (other drivers noticed yet) are now uninstalled in my
  System. Could you please send me
  links on how to check the
  uninstalled the drivers and how to
  Download and install. Thank you
  in anticipation of the command prompt
  response.

  Zubyjoe

  Your uninstall information

  http://Windows.Microsoft.com/en-us/Windows/uninstall-change-program#uninstall-change-program=Windows-7

  or use Revo Uninstaller

  http://www.revouninstaller.com/

  New Nvidia driver

  FTP://ftp.HP.com/pub/SoftPaq/sp61001-61500/sp61072.exe

  Other drivers

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=3355688&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4059%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken