Satellite L300 - recovery ends with the error message: 10-FA1Z - 045D

My Satellite L300 is 3 months old and one a few days ago I resorted to the use of the 4 recovery DVDs.
After several hours, I get an error: 10-FA1Z - 045D message. I made 3 attempts and get the same message every time.

Any suggestions?

Advertisement

My only suggestion for that is you should contact the closest service provider authorized as soon as possible. I am not sure what can be the problem, but it must be HARD drive issue or a problem with the recovery image.

In both cases, you will get free and if necessary service service can order new DVD of facilities of recovery for you.
Do not wait too long and vase your time with her. Call the nearest service tomorrow and talk to them.

Tags: Toshiba

Similar Questions

  • Satellite A200-175 - recovery ends with the error message

    I bought my Satellite A200 2 years and it was the first time I tried using the recovery discs. These discs are properly kept in their original boxes before you use them (no scratches). My computer has virus and I tried to reinstall the system.

    When I started using the recovery disk, I put disc 1 into the optical drive and wait. Soon, he prompted a 'Ghost' screen and began to copy files. Everything seemed OK, but after a while, I get the following message:

    "wimcopyfileex failed...". Error image restoration... ImageX couldn't shall apply from fist F:/05366xsp.swm index 2 odd in c:

    Can anyone help? Thank you very much

    Hello

    I have the Satellite A200 and I got a DVD only. There is no ghost window. Ghost was used until the year 2005. Since then, Toshiba uses new procedure of collection called Rico or Reco. I remember more.

    Can you please send us the number on this CD/DVD recovery?

  • Qosmio X 870-Blue-Ray driver update ends with the error message

    I recently received a message from Tempro for updating my Blue-Ray disk driver. Downloaded, extracted and installed. Error message:

    ....................................... Fix Project Setup Wizard

    ... "The build version of the source is not build target.

    Installation was not completed. At each new start (re-boot"I am again asked to install the new version of the wheat - Ray Disc driver.

    D:\nerladdat\Toshiba\BlueRay\Nerladdaat fran hemsidan\bluraydp-20130117155646

    extracted file is: TC30526100B.exe

    I use a Qosmio X 870-11 G 5C370203Q serial No.

    Grateful for the help to solve them.

    Goran

    What version of Toshiba Blu - ray disc player is installed on your laptop?

    Take a look at this thread
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=71240

    * MasterG wrote: *.
    + The error message appears because the Toshiba Blu - ray disc player is already updated. +
    + Generally after the update, the version of Toshiba Blu - ray disc player should be * 1.0.3.196 * +.

    + Before the update, my BD from Toshiba player was 1.0.0.929. After the update, I've got v1.0.3.196 +.

  • Creation of recovery disks ends with the error message

    I tried to create a recovery disc but got this message "cannot read the following D:\06491XP file. Water hydraulics Error Code: 020150-20-00000000 "at half way through the first DVD disck.

    That means and what I can do to create a recovery disk?

    Thanks for your help

    Hello

    You have linked to burn using TDK or Verbatim DVD-R? You see, some media only good acceptt cd/DVD burn :)

  • Satellite Pro M10 will not start again and comes up with the error message

    My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
    The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

    What can I do to get the notbook again reboot?

    Hello

    Seems that there are problems with the files of GoBack.

    Try to boot in safe mode and remove the Norton System works from your laptop ;)
    If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

    Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

    Good luck

  • The former "cannot change the power state of virtual machine: the process has exited with an error: end of the error message" thing again (Fedora 8/Server 1.08)

    OK, this problem beautifully undescriptive I've seen caused by what seems to be dozens of things happening for me.

    I made the mistake of horrible update my FC8 kernel to the latest one (2.6.26.8 - 57.fc8).  Mind you, that's all that's changed.  It was with a 1.06 server with happiness and perfectly good computers running virtual in use before the upgrade.

    After the new kernel and reboot, I had to rebuild vmmod.  I had to get a fix of any - any later that I used with my previous kernel (116 does not solve the problem of compiling) so I used all-any117d.  Update like a champion.

    Try to turn on a VM and Ihanta!, the above error.

    Nothing else was changed.

    I tried the upgrade to VMware Server 1.08.  Used all-new any117d - update OK.

    Error again.

    I have re-run the compilation, this time to say 'yes' to what the installation script to "adjust the permissions of all virtual machines in xxxlist" or whatnot.

    Error again.

    1. status of /etc/init.d/VMware

    Networking networking on/dev/vmnet0 is running

    Invited only on/dev/vmnet1 network is running

    Network invited only on/dev/vmnet8 is running

    NAT networking on/dev/vmnet8 is running

    Responsible vmmon module

    Loaded module Vmnet

    FWIW, I compile as long as root, but have always run VMware server from my UID nonroot.

    What now?

    I'm in the same boat.  Fedora 8 2.6.26.8 - 57.fc8 #1 SMP

    I have tried uninstalling/reinstalling v1.0.6 thru 1.0.8 with all 116 updates and 117d.   117D compiles with every version of server but when I try to turn on a virtual computer I get this error.

    Cannot change the power state of virtual machine: the process has exited with an error:

    vmxvmdb: name of the Index generated by the configuration file

    POST (no connection): Version mismatch with vmmon module: expected 138.0, obtained 168.0.

    You have a bad version of the module kernel "vmmon.

    Try reinstalling VMware Server.

    POST (no connection): failed to initialize the surveillance apparatus.

    Failed to initialize the virtual machine.

    End of the error message.

    I found several posts other people have this problem but

    they are months with no recent activity and nothing that solved the problem.  I found appeared

    to get a fix, one updated the all an update that corrects the problem for

    2.6.26 performing several nuclei, but the link for the update on TI-psycho appears to be dead.  Here is the link to the discussion

    http://Fedoraforum.org/Forum/showthread.php?t=199026&page=2

    Of course, I would like to know how to solve this problem as well.

    Thank you

  • I'm so fed up with the error message that adobe flash broke down.

    I'm so fed up with the error message that adobe flash plugin has crashed. You got two years, in order to solve this problem, and all your proposed solutions do not work. I see no alternative but to return to Internet Explorer. It's so frustrating when I check my emails and click on a link to get the same message over and over again. Why did this problem occurs only with Firefox? It is not the case with Internet Explorer and it is not the case with Google Chrome. Otherwise, Mozilla Firefox is great.

    This from Halofromsue copied here:

    Well as I said in my last post, yesterday I disabled Shockwave in Plugins. However, as you know, you need shockwave and flash for most things... so I went back and set it to say "ASK to ACTIVATE" so when a web page loads and he needs, he will ask, and then I will either say 'Yes' or ' ' and that seems to work. So far, after three hours, it has collapsed and shockwave/flash all work fine when she needs.

    Me: it works!

  • everytime I turn on my laptop, now I get bombarded with the error message that says...

    Hi, whenever I turn on my laptop, I get now bombarded with the error message that says...  The application or DLL C:\PROGRA~1\Google\GOOGLE~2\GOEC62~1.DLL is not a valid windows image. Please check this against your installation diskette. This message appears every time to load something like yahh or msn etc?  Any help on what caused cela or how to solve this problem would be highly appreciated.  Thank you

    Try to clean the temporary Internet files...

  • My attempt to connect to hotmail fails with the error message "this domain Services have been abandoned.

    Hello

    My attempt to connect to hotmail account fails with the error message "this domain Services have been abandoned. The problem persists in all web browsers. I'm unable to open a session (* address email is removed from the privacy *) which I've used for more than ten years, and I can't afford to lose. The problem started today and I don't know that I ever change any setting in my PC.

    Can someone help me with the first note.
    Thank you.
    Raj Kishore
    E-mail address is removed from the privacy *.
    E-mail address is removed from the privacy *.

    Hi Rajkis,

    When you use Windows Live Hotmail and the problem you posted is with Windows Live, so it would be better suited in the Windows Live community. Please visit the link below to find a community that will provide the best support.

    Windows Live Solution Center Hotmail Portal

    http://windowslivehelp.com/product.aspx?ProductID=1

    I hope this helps.

  • Unable to play the Facebook saga Pyramid Solitaire properly with the error message: uncaughterrorEvent "bubbles = true cancelable = true even + phase = 2"

    Original title: Facebook game of pyramid solitair saga, error mesg

    I receive a message [uncaughterrorEvent "bubbles = true cancelable = true even + phase = 2].  I hit the SPACEBAR to enter a play or to get a total. Can anyone help?

    Hi tipsy,

     

     

    Thanks for posting your question in the Microsoft Community.

    I understand that you can not play the lonely saga Facebook game pyramid correctly with the error message: uncaughterrorEvent "bubbles = true cancelable = true even + phase = 2. Correct me if I'm wrong.

    I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

    Please follow the steps in the link if you are using Internet Explorer and check with the question below:

     

    The problems of games online using Internet Explorer:

    http://support.Microsoft.com/kb/2528246

    Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

     

     

    If the problem persists, you can contact Facebook support to improve assistance on the issue of the links below:

    Facebook Help Center:

    http://www.Facebook.com/help.php

    Contact Facebook and Facebook support:

    http://www.Facebook.com/help/220217228006012/

     

     

    Facebook games help:

    http://www.Facebook.com/pages/games-help/165498566811429

     

     

    I hope the above information helps you and your response is very important for us to ensure a proper resolution.

  • BlackBerry Smartphones BB torch: call the cuts after every 1 hour with the error message: forbidden outgoing calls (8 CC)... .plz help

    The flame of my BB, cutting its call after every 1 hour with the error message: forbidden outgoing calls (8 CC). except the active calls, isn't she the netwrk...?

    Hey pemba.

    Welcome to the community of BlackBerry Support Forums.

    Thanks for the question.

    I would first check to see if you are using the latest version of the software of your network service provider.  Go to www.blackberry.com/update or open BlackBerry Desktop Software.  If the software is up to date, I would check with your provider network for more investigations.

    Let me know if you have any questions.

    See you soon.

  • Hello I have PC and pay monthly. We are a small company. Question 1: For two years I have a full subscription to Adobe all programs. But the other day I would open an another user InDesign documents and could not open this with the error message: the

    Hello

    I have PC and pay monthly. We are a small company.

    Question 1: For two years I have a full subscription to Adobe all programs. But the other day I would open an another user InDesign documents and could not open this with the error message: "the document is done a new version than my version of InDesign. How should I do to upgrade my version to a version more recent?

    Question 2: I already have a license to use the software on two computers. Am I not allowed to use the same version I've taken down on adobe.com til two computers or terms here.

    Sincerely

    Stefan Svensson

    Hello

    Please see update requests in your desktop CC application.

    CC Adobe license can be activated on 2 machines using the same Adobe ID, but only one at a time.

    Reference: licenses and terms of use | Adobe

    Kind regards

    Sheena

  • All of a sudden my 5.7 LR on win10 64-bit start fails with the error message something like "error reading from the cache of the preview... Please restart." reboot, repair, reinstall, or rename SLCache helps to repair.

    All of a sudden my 5.7 LR on win10 64-bit start fails with the error message something like "error reading from the cache of the preview... Please restart." reboot, repair, reinstall, or rename SLCache helps to repair.

    Unbenannt.PNG

    Hello

    Greetings!

    Close to Lightroom.
    Navigate to the location where the catalog is present (default value is within the pictures folder lightroom file)

    And delete the file previews.lrdata.

    Note: do not delete the catalog with the extension .lrcat file.

    Concerning

    Jitendra

  • When I try to install adobe photoshop 13 on my computer it comes up with the error message error code "this installer does not setup on a windows 64-bit operating system support" 6. How to I recify this? TIA

    When I try to install adobe photoshop 13 on my computer it comes up with the error message error code "this installer does not setup on a windows 64-bit operating system support" 6. How to I recify this? TIA

    You can try to download the 64-bit version.  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

    Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

    Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

  • Satellite Pro L series starts with the error message

    Someone played with the BIOS or whatever on my laptop.

    Now, I can't get beyond the log in screen safe mode (black and white) and the error message that oxoooooo7b OXF7A8E63C OXC0000034 rises.

    I can not find discs to reboot or something else and don't know what to do to solve the problem.

    Any help will be most appreciated, because I'm really at a loss for what to do for the best, that I don't know much about computers as of how put the right problems like this.

    Hello

    You can try to repair the system.
    Switch on and press F8,
    Now, you will see the advanced boot options:
    Here you can choose the option: last known good configuration

    If this option does not help, restart the device and press F8 again.
    Choose the first option: fix my computer
    Here, you can choose between different options.
    You can enable Win 7 to find the problems and fix automatically or you will use the Toshiba HDD recovery option to restore the entire system.

Maybe you are looking for