Satellite L350 - 146 PSLD0E - common modul with XP does not work

Similar Questions

• Satellite A215 S4767 Chicony USB 2.0 camera does not work with Skype

  I have a Toshiba Satellite A215-S4767 with Vista Ultimate 32.
  I checked the drivers and they work, I have 10 Diretcx and it works.

  When I open the camera program, it works well.
  I put the camera program is not at initial start-up of laptop.
  I start the laptop, Skype open and figure that the camera does not work and say to check what I've done.

  Yesterday, I had installed the Skype 5.5.0.114 version and the camera has functioned well, I upgraded Skype version 5.5.0.117 and the camera started not to work.

  Hello

  > Yesterday I had installed version Skype 5.5.0.114 and the camera has functioned well, I upgraded Skype version 5.5.0.117 and the camera started not to work.

  This means that it is not software for laptop problem or a webcam, but maybe it s Skype related issue.
  You should check if the webcam has been chosen correctly in Skype video settings.

  If this does not work, uninstall the 5.5.0.117 version of the system, reboot the laptop, clean the registry using CCleaner (freeware tool) and then after reboot again to install the 5.5.0.117 again if not check the 5.5.0.114 a version that worked correctly in the past.

• Satellite Pro A120: my Ghost image created new does not work

  fokes, all the ideas that we are stuck and as normal phone support fate with a cracker of a response... "it seams Ghost is too recent." and unsupported. "

  have a master machine installed and the installer under windows xp pro and about 60 bits of software school, smartboard and network settings. preparation time was about 2 days, so don't want to do the other 11 manually...

  I took the image via the network and then sent to a new machine, and bingo, he sits on the bios screen, now enter the detailed checks so I can see what the bios checks the hard drive is fine and its just hanging somewhere on the wick between bios and where the hard drive takes over.

  OK test 2, take the hard drive of the machine master and make a ghost of disk to disk to a new machine, image ends fine, replace the hard drive in the machine, try to start new machine, bingo same problem lies just to the bios.

  After each test, the machine master fine boots.
  have you tried the main hard drive in two new machines, its fine
  have reinstalled xp pro cd on two hard drives, it must be installed fine
  running spinrite all 3 disks that are very well
  Ghost does not all problems with the master drive
  have tried a fixboot and fixmbr chkdsk on the new machines after they have been imaged, still no start

  This is the first time we had a problem with the ghosts of the machines of tosh in 7 years, (copied about 50 machines so far this year, as some of this model) just woundering if they changed something in the batch or the version of the bios?

  answers please as soon as possible, thank you very much
  Andy

  Hello

  I can't give you a precise answer why your new created Ghost image does not work, but I found this Toshiba useful knowledge base article

  Norton Ghost 8.0 BACK tool is not put on the road correctly if you try to make an image of your drive or partition.
  http://support.toshiba-tro.de/KB0/TSB5400Z20008R01.htm

  and

  Norton Ghost 8.0 or 8.2 BACK tool is not put up properly on machines with S - ATA if you try to make an image of your drive or partition
  http://support.toshiba-tro.de/KB0/TSB6801JL0006R01.htm

  Maybe your allowed some ghost image parameters that are not supported by satellite Pro A100 or missing some drivers SATA or IDE!

  It seems in any case, there is nothing wrong with the Toshiba laptop. All functions using the Toshiba Recovery CD. Created your new image is not 100% good!

• Satellite L650-12 q - recovery of Windows 7 does not work

  Hello

  I have Windows 7 Home Premium (64-bit) edition in my laptop Toshiba Satellite (L650-12 q) and after a new start the Windows stopped working. I have a recovery disk that does not load (I'm done with the pointer in a blank screen) and the drive to install windows 7 would not work either (same thing). Safe mode no longer works.

  This probably means that the partition has a problem I'm wrong? -J' used Ubuntu Live CD, which confirmed that c:\ cannot be mounted while d:\ can.

  The problem however is double: a) I'm not sure that aspect of my data is accessible or not (I can't check) and b) I can't reinstall Windows, as Windows 7 installation process does not work.

  Any ideas please on what to do next? I want to access the partition, have searched on the internet (even tried with a Windows 98/XP boot disk), but had no chance that the partition is written in a newer way, which is not detected by them...

  Thank you in advance.

  > I have a recovery disk that was not loaded (I'm done with the pointer in a blank screen)...
  Do you use it for the first time?

  In any case, try to start the recovery disk, follow these steps:
  -Launch the laptop model and when you see the Toshiba screen home press F12 repeatedly to enter the boot options
  -When the boot menu appears to place the recovery disc into the optical disc drive
  -in the menu choose the CD/DVD drive and press ENTER
  ODD must start recovery disc playback.

  What happens when you do this?

• Satellite A100-499 - function for the WiFi button does not work

  Hello, I have a Toshiba Satellite A100 - 499 PSAA9E.

  I formatted my laptop and installed XP with SP3. I downloaded and installed the drivers (in the right order) for this OS of the toshiba - Europe.com and everything is going well except Fn + F8. It is assumed that this combination has toggle Wifi & Bluetooth. When I switch side 'off' position and I press the keys, appears a message saying that I should switch to position 'on' but when I switch lateral position 'on' and I press Fn + F8 it does nothing.

  If I want to disable the wi - fi I have to do it with other methods: the function key does not work correctly.

  Any clue?
  Thanks for the advice (and sorry for my English).

  When the WLAN switch is on orange LED is also on?
  You can scan area available networks?
  Have you tried to use the WLAN without using FN + F8?

• Auto unlock with Sierra does not work

  Ive got everything turn on; two factor security, have my bluetooth turned on, to have a password on my watch, ect. When I turn on my laptop it says "Unlock with Apple Watch", but then makes me want to use the access code. Ive tried everything, reboot, reboot shows, ect.

  his cause, if it wasn't, it wouldn't show me 'release with Apple Watch ', so I know his shot, but for some reason, its does not work. Maybe a small problem?

  Check that you meet the requirements of the system

  Automatically unlock your Mac with your Apple Watch - Apple Support

• I downloaded the (US) dictionary and spellchecker - it's showing in my modules - but it does NOT work - WHY?

  I added the English spelling corrector of the United States (US) 5.0.1 - it is in my modules, spellchecker is checked in tools/options - and I restarted firefox after it said 'successful' - However, it still does not work.
  Is there anything else I need to do?
  Help, please!
  TY

  TY so much... it works now. I see what I was doing wrong. I would right click, but not on the misspelled word and the area to correct the spelling & "add to Dictionary" did not come upward. After reading your response and clicking on the link, I decided to try by clicking right on misspelled word... YEAAAAAAAAAAA!
  Yet once, so I appreciate your prompt response & look forward to transversing again in the future.
  Have a nice day (night)
  Jonie

• Satellite C50D-B-120 - buttons on the touchpad does not work after upgrade to win 10

  I just bought this new laptop. I have updated to Windows 8 Windows 10. Everything worked fine before the update. I am now active on Windows 10 and the mouse pad does not work. Initially, the entire mouse pad not working, I couldn't even move the mouse on the screen. I had a play around in the settings and have managed to get the work of the mouse, but now the button of mosuepad. I searched around the computer for the settings to solve this problem, but I had no luck.

  Please any help would be great, begin teaching and could do with getting this issue sorted.

  Thank you!

  You need to uninstall the driver for the touchpad (MOMENTUM or Synaptics)
  After that, restart the laptop...

  You can also try to update the driver in Device Manager... but the unit must be connected to the internet...

• Satellite Pro A-153 C50: F11 function key does not work

  The F11 key where I can spend the sound power switch does not work!
  The other keys work correctly.

  Everyone knows how to restore its function?

  Hello

  You use the special function or Standard F1 - F12?
  The special mode of operation allows you to use special features without pressing the FN key.
  This means that if the special function mode, you must press only F11 to turn the sound on and off. In the case of special function mode is off, you must press FN + F11 to turn the sound on and off.

  You can enable or disable the special function mode in:
  Office-> Office help (in the task bar)-> tools & utilities-> function key

  But I wonder if the F11 key works with other software?
  For example: pressing F11 key while using the Internet browser (internet explore) should allow mode full-screen. You can check this?

  Keyboard F11 key is maybe defective and so the sound ON / Off function does not work

• Satellite L300D - installed XP and now my wifi does not work

  I spent from Vista to XP and now my wifi does not work. I was told that I don't have the drivers.
  Can someone help me? I have a Satellite L300D-01N. Please help me, I don't know much about this kind of stuff.

  Thank you

  You can download drivers Toshiba from here: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  There is however no driver XP for the L300D. But I found a LAN driver for XP wireless that would work.

  Select:
  Laptop
  Satellite Pro
  Satellite Pro L series
  Satellite Pro L300

  Download and install
  -Wireless Lan Driver Realtek Semiconductor Corporation Windows XP 6.1116.1226.2007

  If this does not work, you can have an Atheros Wireless LAN card. If this is the case, look at the other models for an Atheros Wireless LAN Driver XP.

• Satellite L30 PSL33E: Link to the energy saver does not work

  Problem: someone can help me find, this driver download

  Power Saver link does not work when I want to download the driver (WIN XP).

  http://support.toshiba-tro.de/tools/satellite/SL30/XP/TPS/pwrsav-psl30e-XP-70307q-en.zip

  Hmm, are you 100% sure?  :|

  I checked the link and it works for sure!
  Check again

• Satellite L500-126, (Fn Hotkeys) Flash card still does not work

  I use windows 7 ultimate x 64 on L500-126, the new win7 x 64 drivers are available since yesterday...

  However, maps (Fn Hotkeys) Flash still does not work after the installation of the new VAP. Flash cards can appear at the top of my screen, I can click on them with the mouse, but the Fn combinations work not at all!

  I noticed that there is a downloadable driver called "support Flash Cards", even, I installed this app, the problem still remains.

  Then I uninstalled VAP and kept "Support Flash Cards", to my surprise, the combination Fn + F6 and F7 (brightness adjustment) worked! However, without VAP I couldn't use other combinations.

  Are there still problems with the new VAP for win 7 x 64?

  P.S. The new "hardware configuration" seems to be a problem as well, I tried to change some configurations in this application but after re-boot, all options are returned.

  Please do not create different threads on the same topic!
  Follow your first thread:
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=182199

• Satellite P100-324 - GPU overheating due to fan does not work in the operating system

  Hello world.

  While trying to solve the problem of RAM of 4 GB ([this thread | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=28374&tstart=0]), I meet another weird thing - gpu overheating due to fan does not work in the operating system.

  Now, I restored the XP MCE using the Toshiba Recovery and I was VERY surprised to see that the problem still exists! As soon as loading the system GPU fan stops, and there is only tranquility. The application load is heavy on GPU and reaching 104 results by reducing its GPU and MEMORY clock values and NOT in the activation of the fan.

  The same thing happens in 64-bit gentoo. ACPI can be turned on or off, it is not serious, the GPU fan always dies as soon as the system load. In non-OS environments (bios, program of recovery, etc.) the fan works fine, GPU cooling from time to time.

  This problem occurs in versions of BIOS: 2.40, 4.00, 4.20.

  Any help would be greatly appreciated, since this laptop is my main working tool and I can't let go 14 days (service).

  I saw in your other thread that you have updated the BIOS and you have installed several different OS.

  Fact is that the BIOS v 4.2 package contains BIOS 32-bit and 64-bit OS.
  Your laptop has been preloaded with Win XP MCE 32 bit. Please use the 32-bit BIOS if the original XP MCE running on the laptop.

  Best regards

• Satellite L30 PSL33: Link to the display driver does not work

  I'm trying to download displey drivers but the link does not work

  Satellite L30 PSL33
  http://ru.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=ru

  I use dial-up/modem

  > I'm using modem dial-up /: D
  Maybe it's too slow s

  I checked the Power Saver link and this tool can be downloaded.
  Therefore recommend that you check it again!

• Satellite A200: After Vista Ultimate upgrade Chicony webcam does not work

  Hello

  I hope someone can help me. For 3 weeks, I have buy the Toshiba A200 with Windows Vista Home Premium and very good built-in Webcam function. I have no problem.

  Yesterday I did an upgrade to Windows Vista Edition full and now the Webcam does not work.
  Every time when I want to launch the following software message come «Please activate the webcam»

  In the it´s control panel that wrote this function of Doesna´t of hardware because the software isn't fair. But I have the right software. I have try the original software on me the hard drive and, of course, I do a download from Toshiba and I try this.
  But I still got the same message.

  Please help me.

  Hello

  I m not an A200 owner and, therefore, I can not say much about this webcam tool, but to my eyes the Chicony webcam software should work with Windows Vista Ultimate Edition, because this version is almost the same as Windows Vista Home Premium. The ultimate version supports more features like Home Premium, but the software is running and must be compatible with both versions of Vista.

  How did you install Vista Ultimate? You perform a new installation of the OS, or you upgrade only the Home Premium-> Ultimate?

  Anyway, currently version 1.0 of the Chicony camera software is available on the Toshiba page.
  You may need to wait until the new update has been published.

  By the way: also check these threads;
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=23587&MessageID=87055
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24161&MessageID=88732

  Good bye