Satellite L40: How can I recover the files from the hard drive

Similar Questions

• How can I transfer encrypted files from old hard drive removed (transfer windows easy?)

  Hello

  I'm trying to get some files off my old hard drive encrypted. He has xp on it, and I can't start on my new computer. Since it is a separate, apparently, I can't do either windows easy transfer. Is it possible for me to locate the certificate and key, or to transfer files with the key and the certificate on my new computer (I have password from the old computer if I need that)? Can I somehow run WET on this hard drive for keys/certificates can be transferred. This seems to be a common problem from what I have read.
  Otherwise, do you have ideas on how to start my old xp disk on my new system without reformatting?
  Very important to get these files.
  Thank you!

  First of all, I assume you mean encrypted files (EFS, Encrypting File System).  These files are encrypted with a key that is still encrypted in your system like a certificate.  In order to read your encrypted on any other system files, you must restore the certificate from a backup.  The short article is mandatory for anyone considering the use of EFS:
  "Best Practices for encrypting file system"
      <>http://support.Microsoft.com/kb/223316 >
  Special attention to the subsection down titled "why you should back up your certificates.

  HTH,
  JW

• How can I recover my data from my hard drive? or continue to install my windows 8 with no loss of data?

  I have deleted (formatted) my windows 8.1:

  Disk 0 Partition 1: Recovery, and

  Disk 0 Partition 2

  A single disk rest "Drive.
  I tried to install my windows 8 8.1, now I'm stuck with a Dell Inspiron that cannot load it is current windows and I can't afford to format because it locates all my data.

  Please help with possible recovery options, that I may have? The last thing I tried was buy an enclosure and place my 500 GB HD inside, how ever I saw the first two aforementioned HD

  Help, please

  Hi, I found the solution, I had to plug my hard drive in a case then:

  1. restart the machine with Windows 8.1
  2. determine the parition of "EFI system" with the disk management utility
  3. Run as administrator command prompt
  4. typediskpart
  5. type select disk 0 then select partition 2 thenassign
  6. He will appear in my computer that he did as a player

• How can I recover old files from Outlook Express to a secondary hard drive to Windows 7?

  Power supply on the old PC Windows XP, which uses Outlook Express consumed. I have installed hard disk Drive 'E' on Win7 unit. How can I recover the files OE on Windows7 unit?

  Original title: OE for Win 7

  See http://www.pcdon.com/080113OutlookExpress-WindowsLiveMail.html.

  Once you have the data in Windows Live Mail, you can choose what e-mail program you prefer and import to Windows Live Mail.

  Some e-mail programs can import only an instance of Outlook Express, which is not an option in this case.

• Satellite Pro P100 PSPAHE: How can I replace the HARD drive

  I have not found any documentation about the replacement of the engine on my Satellite Pro 100 PSPAHE.
  How can I physically remove the disk?
  And my Device Manager indicates that the drive is a Fujtsu MHV2200BT PL ATA. What, PL, sounds like parallel - I thought it was a SATA drive.

  Hello

  This laptop was equipped certainly SATA HDD :)
  If you want to upgrade to a larger HARD drive and a SATA HDD is right!

  The slot in the HARD drive seems to be placed at the bottom of the unit near the edge of the laptop.
  To remove the disc HARD turn the computer upside down.
  Loosen the 2 screws and remove the cover of the HARD drive during the liberation of the locks.
  Remove the HARD drive cable connector HARD drive. Be sure to not reach
  damage to the connector. Place the mounting of the HARD drive on a flat surface and remove the 4 screws.
  Then drive HARD is free one may be replaced by a new one.

• How can I recover my files from my broken Macbook Pro (13 in. end 2011)?

  Hi all

  I had some problems charger abroad and had to use a charger of mash-up the top of a friend. The charger has ended up working but finally died and also killed my macbook with it (do not start or accept the charge of a new charger). The battery indicator still works. I had checked it free of charge from abroad and the iStore has stated that it is from a broken logicboard. I've already replaced the laptop but I would like to recover the hard disk or files, because they have all my pictures and videos of my year abroad with my girlfriend. I'm not really worried to recover the laptop, just files or hard drive.

  Thanks again

  Remove the hard disk and place it in an external enclosure - then that connect to the current laptop and read the files that it

  MacBook Pro 13 "Unibody Early 2011 hard drive replacement - iFixit"

• Satellite 1805-S253: How can I replace the HARD drive?

  Anyone know where I can find a manual installation to install the new hard drive? Recently bought a new drive hard, but don't can't find how can I change drive.
  TKS.

  Hello

  As far as I know the HARD drive is placed on the right side of the laptop.
  I think it's on the same side where the reader is placed.

  1. turn the computer.
  2. remove the screw of the cover of the HDD location and remove the cover.
  3. remove the screws fixing the HARD drive ASSY.
  4. hold the HARD drive door handle and remove the drive HARD ASSY.
  5. remove the screws that attach the HARD drive.
  6 detach the HARD drive from the HARD drive support.

  That's all

• Satellite L40 cannot start or recognize the hard drive

  Hi all

  I bought a new Satellite L40 without windows or CD come with him,
  so now when I put the Xp CD, the drive cannot recognized the hard drive or a CD-Rom.

  error message
  Reboot and select boot device prober, or insert boot media in selected boot device and press a KEY.

  I'm not saying any key LOL
  It suppose to be all LOL key to

  Please your help in this matter

  Here another thread about the installation of the SATA drivers!
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26040

  You must include the * Intel Matrix Storage Manager * during the XP installation process.
  As far as I know you have to press the F6 key to include the external USB FDD drive driver.
  Once you have included the SATA driver * DON T format the drive HARD * or create all partitions because that would erase the included driver!

  Another possibility to include the SATA drivers is the use of the * software to nLite.
  By using this software, you could include the SATA driver in the new created XP CD.
  And then you could boot from the new CD.

  > no initialization of SPARCFichiers of hard disk
  > can not load hard drive
  > Insert systemdisk and press a key

  This error message appears because you didn't boot from the bootable CD and/or the operating system has not been installed on the HARD drive and the laptop I wanted to boot from the HARD drive.

• Satellite 1900-303: can I put the hard drive 120 GB

  I have a S1900-303 and I think to raise the 120 GB hard drive. What are the problems, if any, are that I meet and I can do froom the Toshiba startup disk or do I just install XP from a XP disc?

  Hello

  That I myself remember Satellite 1900-303 has been delivered with the 30 GB HARD drive.
  So, in my opinion, 120 GB HARD drive size is too big and I presume that the BIOS of the laptop will not recognize the HARD drive!

  I think you can use a 40 GB, 60 GB and a 80 GB HARD disk.

  PS: you must search the HARD disk with the IDE (ATA-5) increased!

  Good luck and have a nice day

• How can I access the hard drive in HP 14 - b120dx?

  Hello

  I am trying to remove the body from the bottom of my HP 14 - b120dx in order to access the hard drive, but can't seem to find a way to do it.  I removed all the screws but I can't find an easy way to open the case.  What should I do?  Thanks in advance!

  Hello

  Page #55 the next document shows you how:

  http://h10032.www1.HP.com/CTG/manual/c03721290.PDF

  You must unplug the small number of things.

  Kind regards.

• Aspire ZC - 606 how can I replace the hard drive

  Aspire ZC - 606, that will not start. It emits a sound once and asking you "Reboot and select proper boot device" or insert the bootable media...

  I can start the installation and the drive is missing, only the CD/DVD is here.

  I need to pull the HDD and backup all the data on it and replace it.

  I can't find anywhere that shows me the removal process.

  I replaced several HARD drives in all-in-one but have always found some instructions.

  Someone help?

  Pete

  before changing the HARD drive, I would try another SATA cable, is the part number: 50.U86D5.002

  to open the back of your ZC, you must open the 2 feet at the bottom of the back cover and unscrew the 2 screws; with a PIN that you had to push into the small hole in the DVD player until he slip; Then, you can lift the back cover.

• How can I recover photos on an external hard drive?

  I have an external hard drive with photos on what I'm trying to transfer them to the hard drive on my computer?

  Copy/paste?

• How can I recover my files from hard drive on a clean hard disk, Diskpart

  I tried to install Windows 8 Preview, however, I kept getting a message saying that Windows is to not install the disk hard because it was in the GPT format or something. When this happened, a forum on the internet suggested that I use DiskPart to clean the disc. I did as he said, not realizing that it would literally clean off my hard drive. I am trying to use another hard disk and install a (overview of Win8) OS on it so that I can access the old hard drive and retrieve it using a program called TestDisk http://www.cgsecurity.org/wiki/TestDisk

  I hope that it will work, but I would like to comment on this and maybe some VIP tips.
  At this point, any advice is good advice.
  Thank you

  First of all, I would highly recommend NOT to use Windows 8 for your recovery efforts.  New systems of operating have incompatibilities with the generation previous tools and utilities - witness to the fact that all of the major anti-virus companies update their products to Windows 8.  Stay with a published known operating system.

  Then, realizing that what you do for the old hard disk decreases the chance that you will be able to recover the files.  You would ideally take the disc, put it in an antistatic bag and ship it to a recovery company data that you would charge probably hundreds of thousands of dollars to recover your data, but was probably a chance of recovering 100% as long as the player has not been written to since the diskpart session.

  Having never been in the position that you are in because my computer gets backed up every night, I can't recommend a recovery product based on personal use. I've seen a good many people recommend Recuva (http://www.piriform.com/recuva) and it would probably do the work for you... but remember once again, play you with the reader, becomes it is likely that you will not be able to recover at all.

• How can I recover a file from a device?

  Hi all
  I need to recover the ODB file that fits in the storage card from one peripheral to somewhere in the server or to a local win32 client.
  
  . ODB is storagecard.
  Lite works on linux
  backend is on linux.
  
  client device is connected via gprs.
  
  Mobile admin, under the command, I see an option saying 'Recover a file device' but no help on the topic entry.
  
  Thank you
  paninie

  The file would be very likely in $ directory ORACLE_HOME/mobile_oc4j/j2ee/mobileserver/applications/mobileserver/devmgr. I think that the name of the directory would be identical to the device id.

• HP Envy 17 L8L13AV: How can I change the hard drives in my desire to 17

  So finally getting my new laptop for work, the first thing made disk image and drive cloned to 2 separate drives, 1 disk to hide for emergency use second drive an SSD to replace the 1 TB drive. Low and here is new HP Envy can not simply pull old (new) hunt and put new and install first as storage device that I was planning to do. Can someone please tell me if I can get out of the car and replace it with the SSD, I bought this laptop? I don't care even if I use the 1 TB it came with I want to the SSD in there. Before I even started looking for the reader. I really just instructions on how to pull the back panel or keyboard and put in the other drive. Please, any help would be appreciated. Yes, I have all the tools to do so.

  Here is the Manual:

  Manual

  See Page 64. You must remove the top cover, but not the motherboard. This jeopardize the warranty but HP will not void the warranty if you do the upgrade successfully.

  This series of videos will also be useful:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c04339451&DocLang=en&docLocale=en_US&JumpID=reg_r1002_usen_c-001_title_r0008

  Assuming you did the clone properly, you should just be able to exchange the SSD instead of hard drive.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.