Satellite L750 - WLAN does not work after upgrade to Windows 10

Similar Questions

• Satellite L850 - Bluetooth does not work after upgrade to Windows 10

  After the upgrade of the W10, BT did not work so I updated the drivers Atheros AR3012 version 10.0.1.1

  It still does not work. My phone can see the laptop on BT, but says that he cannot communicate with him.

  The laptop does not tosee phone & Yes the phone is discoverable. My BT headset can not be seen now by phone.
  All this worked fine with W7

  My laptop is Satellite L850 (PSKDLE)
  Any ideas?

  Hello

  In most cases, BT does not work due to lack of BT software.
  I guess you will need to install the filter for the BT driver package.

  In most cases the 8 Win / filter package 8.1 Bluetooth driver should work under Win 10... Then try to install the Atheros Bluetooth driver filter package and check to see if you will be able to activate BT

• Satellite L500 - 20 X - switch WLAN does not work after upgrade to Windows 8

  Hello

  I extend my Toshiba Satellite L500 - 20 X for Windows 8.
  Unfortunately, since this update my WLAN switch is no longer working. All function keys work only (switch WLAN) F8 to F7, and F9 (touchpad) is more work.

  What can I do?

  Thanks in advance.

  Kind regards
  Klaus

  Satellite L500 is not win 8 taken upgrade supported, so I think that the problem is a missing driver or software

  As far as I know to be able to use the keys FN added value package to win 8 must be installed.
  Check another area driver Toshiba notebook series supporting the Win 8.
  Maybe you could use the VAP released for other series.

• Satellite A300D-15B - Webcam does not work after upgrade to Windows 7

  My webcam does not work after upgrade to Windows 7. I installed the drivers but still having no luck

  Hey Buddy,

  What does it mean exactly when you say he won t work?
  You get an error message or only a black image? What model of laptop you have and that you use the Toshiba Windows 7 upgrade kit or a disc of Microsoft?

  At this moment I can only offers to install latest driver of the webcam of the official website of Toshiba. Make sure that this driver is released for Windows 7 and not Vista.

• Re: NB200-134 - touch FN does not work after upgrade to Windows 7 Ultimate

  My NB200-134 of FN keys does not work after upgrade from Windows 7 starter to Windows 7 ultimate. I tried to install all the drivers found on the Web from Toshiba website for my lappy but it still does not work.

  Help please

  Hi asalamk,

  The FN keys are controlled by value added and Flash Cards Support utility package. I think you forgot to install these tools

  You should recheck the Toshiba page and download these two tools. Start with the installation of the package of added value, and then restart your laptop. After this utility installation of Support Flash Cards. Reboot once again and all the FN buttons should now work correctly.

• VMware Player 6 VM - bridged network (Ethernet/LAN) adapter does not work after upgrade to Windows 10 - known issue?

  Hello

  I upgraded the PC host, but also virtual machines to Windows Pro 10.

  TheVMware Player 6 VM - bridged network (Ethernet/LAN) adapter does not work after upgrade to Windows 10...

  Is this a known issue?

  Thank you!

  Kind regards

  Joe

  SOLVED!

  
  

  I uninstalled VMware Player, including the abolition of the configuration files.

  
  

  re-installed VMware Player and it worked!

• Re: Satellite L300 - camera does not work after upgrade to Win7

  As in the subject. Camera does not work after the upgrade to Windows 7. I have tried almost everything found on the Internet. The drivers are installed.

  There is no exclamation point in the system.

  Satellite L300 (PSLB8E)

  Hello

  What happens when you start the webcam app?
  All programs-> Toshiba-> webcam

  Did you install other 3rd software part as for example the Skype that could access the webcam?

  Extra tip: go to BIOS and set it to default, save changes, and then restart the laptop.
  Start Skype for example, check the settings in Skype webcam chose correctly.

  It would be really interesting to know if the other software would be able to use the webcam.

  By the way: have you installed Toshiba face recognition? This software use and access the webcam as well
  Then sometimes it would be possible that this software could block the webcam and webcam tool could not work

• Satellite L350D - WLAN does not work after the recovery disk

  Hello

  I just got a L350D. I ran the tool recovery disk, without any other program running. It is on a good way to end the second disc and that: BAM! blue screen. Since start-up, my LAN and WLAN does not work.

  He always says ' WLAN 2.0 bg adapter "to which no driver is found. The driver is a Realtek WLAN and LAN.

  Don't you think that the crash of the WLAN and LAN module fails?

  I tried the things:

  System reset
  Reinstalling the driver

  but nothing has worked.

  Someone at - it advice?

  Thank you very much!

  Mycale

  Hello!

  I put t know what is the reason for this BSOD when installing, but you can post the BSOD code? For example, you can search based on Microsoft Knowledge for this code.

  In addition, I would try to update the BIOS of your laptop that you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  After you have updated the BIOS to try to update the WLAN and LAN card driver, or try to reinstall Windows using the Toshiba recovery disc.

  Good bye

• Pavilion dv6 sd card reader does not work after upgrade to windows 8

  Hello

  My card reader SD HP Pavilion dv6 does not work after windows 8 upgrade (6 months ago). Previously, it was working fine when I was with Win 7 (which is the default OS with this laptop).  I don't find the device in Device Manager (under the peripheral system or hard drives). Read the similar section in the HP forum, but it did not help as much as the device is missing in this case. Can anyone help?

  Hi SanSam.

  Thank you.

  Install the driver from Realtek for Windows 8 card reader.

  Please post your results.

  Best regards
  ERICO

• Acer Aspire M5-481TG - card reader does not work after upgrade to Windows 10

  Hey!

  I can't get my card reader works after upgrade to windows 10 64-bit...

  Device Manager gives me return error Code 48, tried to install different drivers, I have found for Realtek PCIE Card Reader... None of them work...

  "Code 48: the software for this device has been blocked from starting because it is known to have problems with Windows.

  Have you ever tried the Realtek website?

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownT...

  Please uninstall the driver installed before installing this, on right click Device Manager, choose uninstall, and check the box uninstall the software too.

• Satellite A210 - BIOS does not work after upgrade

  Hello

  I have a satellite A210-17 for a few years now, but I made the mistake to go to the Microsoft Web site
  to make a BIOS setting to day and once I installed upgrading BIOS, that the laptop did not return ever on, black screen.

  I brought a guy in the month city 3 or 4 he is, he said, it could replace a bios chip if necessary
  but did nothing or I would have heard of him now.

  Is it possible that I can get the bios chip and have him install for me?
  I don't have 200 euros to replace the whole motherboard.

  This laptop was brilliant before that.

  Thanks in advance

  Update the BIOS is a very serious procedure, and the use of fake and not compatible BIOS would damage the motherboard.

  To be honest, I don t think that the replacement of the EPROM would help you that of course, the BIOS is stored on EPROM module but in most cases this chip is soldered to the motherboard and the EPROM replacement will not be easy

  To my knowledge the EPROM module could be flashed once more using the crisis disk BIOS and the special procedure. Usually, these updates of the crisis of the BIOS can be done by maintainer authorized Toshiba and that don t require the replacement of the EPROM module.

  I also read in this forum that some guy tried to Flash the EPROM module to clean hands in some cases, it worked, but in different cases such update does not work correctly

  However, I recommend you to use the advanced search option forum and check a few different discussions on crisis disk BIOS / update

  Otherwise I recommend you contact the Toshiba ASP in your country and products BIOS Update of the crisis

• Pavilion dv7: Wireless does not work after upgrade to Windows 10

  After the upgrade to Windows 10 Wireless does not work, even if the wireless symbol F12 shows blue. In the network settings, the wireless switch exhibits & cannot be turned on to.

  This feature worked perfectly in Windows 7

  No worries.

  Thanks for the actual name of the product from your laptop.

  Let me take a look.

  I will edit this thread to let you know what I found.

  The Intel Centrino Advanced - N 6230 is a wifi adapter that is compatible with your book which has Windows 10 drivers available. the driver is on the following link.

  https://communities.Intel.com/thread/59710?start=0 & tstart = 0

  You can replace yourself because it is easily accessible after removing the cover of the hard drive Bay. See page 21 of the manual at the following ADDRESS.  http://h10032.www1.HP.com/CTG/manual/c02842278

  I saw them on eBay for @ $20.00 USD

  http://www.eBay.com/ITM/new-Intel-Centrino-advanced-N-6230-Wireless-WiFi-Bluetooth-combo-card-62230ANHMW-/170958962681

• Trackpad and keyboard does not work after upgrade to Windows 10

  Trackpad and keyboard do not work after the upgrade to Windows 10 in Boot Camp on a MacBook Pro in early 2011. So, I'm unable to enter password. How to connect? Can I go back to Windows 8?

  1. you can turn off your Mac and your power it back up and hold the Alt/Option key.

  2. you can also run the following procedures to restore the OS default.

  3. If you use a Mac 2010 to run W10, officially Apple does not support the combination. Older than 2012 Mac is not supported for the W10.

  4. Please see also Boot Camp: the operating system default value .

• Micro does not work after upgrade to windows 10

  My microphone does not work in any software after the upgrade to windows 10. Stakeholders do not seem to work.

  The device says the latest drivers are installed (Conexant SmartAudio HD). I uninstalled and reinstalled, but the microphone still does not work.

  Thank you

  Solved it by downloading the latest drivers finally found here, not the default driver installed by windows 10 who said he was the most up to date.

• HP Pavilion dv7: RealTek Cardreader does not work after upgrade to Windows 10 10

  After the upgrade to Windows 10 64-bit of Windows 7 64-bit, the Realtek PCIE card reader does not work.  Device Manager showed initially a card reader driver error, but after the reboot, I can not find an error or the device itself.

  Any ideas would be apprieciated.

  Hello:

  See if the driver installation of W10 directly from Realtek card reader solves the problem.

  First driver on the list...

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownTypeID=3&GETDOWN=false