Satellite L955-10f - need help with uninstall Win8 and install Win7

Similar Questions

• HP Pavilion Notebook - 15-p199: need help with the installation and activation of 10 Windows after completely uninstalling Windows

  Hello HP assistants.

  I need help for a specific problem. My laptop came with an installation of Windows 8.1. Then I upgraded to 10 Windows when it became available. After a while, I decided to uninstall Windows completely (to wipe the hard drive) and install a Linux operating system.

  Now, I decided that I want to use some software that is not available on Linux and if I want to reinstall Windows 10. My problem is that Windows has completely disappeared in a form any. So now, I need to download Windows 10 from an official source (which I think can be done fairly easily from the official source of Microsoft, although if there is a better, HP official medium to do this then please recommend it) and then I need to activate Windows some how.

  As has been made clear, I have the right to use Windows 8.1 and 10 but I would need to download Windows 10 and turn it on. Is there a way to do this? I'm literally stuck without solution.

  Thanks in advance.

  Hello

  As long as the previous installation of Windows 10 had activated Ok after upgrade from 8.1, you can simply perform a new installation as described in the guide on the following link.  Note: On the activation screen, select "I don't have a product key" - Windows will activate automatically once installation is complete.

  http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

  Kind regards

  DP - K

• Need help with my preparation and suggestion

  I'm looking for new jobs of my existing role. All interviews are I get here is script based and I'm not able to answer most of them and thus be rejected in all cases. . In my work daily I am part of the team of DBA and daily work is to monitor the tablespace, Auditor, audit point mounting important space, for instance health check and backup of surveillance, it becomes boring, day after day, it's why I want to spend. But how to prepare for these typical scenarios based queries, I have both and unique and Dataguard setup in my laptop to play with, but I don't get any idea how to stimulate different scenario that can help me to crack interviews.
  
  Any idea or advice and suggestions will be highly appreciated and will be followed diligently. Thanks in advance.

  Hello

  I hope that... .in real time world... .they expects more from you than what you do now... as a DBA...

  in fact as a DBA, you will need to practice/play on your laptop computer or test environments... many things is to do...

  How to prepare to answer these scenario type of problem and their solutions

  convenient and... practice... practice... practice... practice... practice... practice... practice... practice... practice... practice... practice... practice... various scenarious... on your test computer...

  example: 1st thing is you need to learn oracle architecture and get good knowledge about this... book architecture expert oracle by thomas kyte...
  2:backup and recovery... .every interviewer waiting for information from you in this category... I hope... you need to practice various scenorious on the test computer.
  as some are below... take a full backup of your database before us all. R & D...
  1:datafile loss... system datafile losss... remove from the disk and try to restore/recover the PB... practice using backup bcakup online/offline...
  2 repeat corruption... size of newspaper for modifing do it again...
  (3) controfile corruption / lost
  DataGuard 4) standby log archive lack of sequence as gap next... WRT primary... pause connection N/W try this... practice scenario switch on / switch on scenarious... etc...
  point 5) practice in recovery time...
  Take 6) the practice of the above database hot backup like data lost/corruption...etc file...
  (7) unconsciously table drop... flashback technology...
  RMAN 8)... beauty of oracle... a lot is there to play the test using RMAN...
  Configuration... show all... it will give you a few parameters conf try to read each conf setting if its other than default configuration... If you... backup... restore... any file missing practice/play cmds RMAN... like missing file controfile file missing... etc...
  now, one day each interviewer ask a lot about RMAN...
  (9) make cloning using offline online backup/backup/RMAN

  http://gavinsoorma.com/2010/06/some-more-RMAN-recovery-scenarios/
  http://docs.Oracle.com/CD/B28359_01/backup.111/b28270/rcmintro.htm
  http://docs.Oracle.com/CD/B19306_01/backup.102/b14191.PDF
  Once you got the good knowledge over things... then... the performance optimization analysis statspack report/awr...etc...

  my suggestion is to get the habit of Forum oracle fallow every day... If possible, each Hr... and try to read old messages in the form... problem to reproduce by your free the.experts and fallow solution and document those it will be useful for you made good things ahead for you... the best...

  Thank you
  DBC,
  SR DBA.

  Published by: dbc001 on March 10, 2013 10:36

• Need help with the formatting and reinstalling windows

  Hi, I have a Compaq Presario C700 p/n GR598EA #ABU I got to work about 3 years ago.

  Recently, it does not load windows, even in safe mode and I can't get back either.

  I used a disc to boot from linux to access and backup of all my important files and now I want to reformat the hard drive, resintall windows and start over (or try something else which will fix it)

  The laptop has been pre-installed with Windows Vista and HP stuff had already installed on it.  I don't have a Windows disc or discs of driver with the laptop.

  How can I format and reinstall windows and drivers, if I don't have records?

  Help, please.

  Thank you.

  Hello:

  You can order a Vista recovery disk set for your laptop if they are still available. See the instructions below:

  http://support.HP.com/US-en/document/c00810334=

  If you live not in the US or the Canada, you can contact HP Support worldwide for the country you live and ask recovery disks command to your laptop

  The link to the assistance of HP WW is below:

  http://welcome.HP.com/country/us/en/wwcontact_us.html

  Paul

• Need help with flash player using w/Win7

  OK, here we go. I have - Windows 7 Home Premium 6.1.7601 running service pack 1

  Type of system: x 64-based pc

  Windows Internet Explorer 9 (update version RC) 256-bit

  I use to be able to watch videos on youtube ect. But now flash player does not work. What is the problem? I have Adobe flash player 10 activex and installed shockwave player 11.5 and still it asks me to update my flash player. Need help.

  Hi, thanks. This "Perfect Optimizer" which was found and removed, McAfee did remove or MBAM?

  Is the trial version of MBAM, the free version which is a stand alone, which is run from your desktop or a version installed?

  You see the animation of the Flash Player logo and what version of Flash Player is available on the following site?

  http://www.Adobe.com/software/Flash/about/

  Then check on this Shockwave Flash object in your addons that I mentioned before.

  I want to ensure that a certain number of things and then have another procedure for you and explain once I get an answer from you on the above.

  Thank you

  eidnolb

• Need help with network inside and outside Transmittion script

  Hi, I have a problem in my script. I would get Vm net.received.average and net.transmitted.average. Somewhere, it displays the empty output for me, can I have a sample of script on obtaining transmittion of network for 7 days

  My script:

  $report = @ (get - Vm = $vms). where {$_.} PowerState - eq "Receptor"} $lastWeek = (get-date). AddDays(-7) foreach ($vm in $vms) {$vmNet = "" |} Select VmName, NetworkReceive, NetworkTransmit $statReceive is Get-Stat-entity ($vm) - start $lastWeek - finishing (Get-Date) - MaxSamples 1 - net.received.average stat. Group-object - property Instance $statTrans = Get-Stat-entity ($vm) - start $lastWeek - finishing (Get-Date) - MaxSamples 1 - net.transmitted.average stat. {Group-object - property Forum $vmNet.VmName = $vm.name $vmNet.NetworkReceive = "{0: F2}" f $statReceive.value $vmNet.NetworkTransmit = "{0: F2}" f $statTrans.value $report += $vmNet} $report | Select VmName, NetworkReceive, NetworkTransmit | Export-csv "c:\q33.csv".
  Thank you

  Both are related to the use of aggregation running on your vCenter

  Historical data interval 4 are grouped once a day, and on your vCenter this SQL task seems to be planned at 08:00.

  That is why the time stamp.

  Statistical data are aggregated to one historical interval to another.

  Since ask us the historical interval 4 (with the IntervalMins parameter), the aggregagtion to this historical interval is not yet made.

  This is why the last day 2 are not present in the report.

  You can play with the - Start and - finishing settings to have a period of 7 days which is at least two days yet at the time.

  $report = @()
  $metrics = "net.received.average","net.transmitted.average"
  $vms = Get-Vm | where {$_.PowerState -eq "PoweredOn"}
  $start = (get-date).AddDays(-7)
  $finish = $start.AddDays(7)
  
  Get-Stat -IntervalMins 1440 -Entity ($vms) -start $start -finish $finish -stat $metrics -Instance "" | `  Group-Object -Property Timestamp,EntityId | %{
      $vmNet = ""| Select VmName, Timestamp, NetworkReceive, NetworkTransmit
      $vmNet.VmName = $_.Group[0].Entity.Name
      $vmNet.Timestamp = $_.Group[0].Timestamp
      $vmNet.NetworkReceive = "{0:f2}" -f (($_.Group | where {$_.MetricId -eq "net.received.average"} | Measure-Object -Property Value -Sum).Sum)
      $vmNet.NetworkTransmit = "{0:f2}" -f (($_.Group | where {$_.MetricId -eq "net.transmitted.average"} | Measure-Object -Property Value -Sum).Sum)
      $report += $vmNet}
  $report | Export-csv "c:\q33.csv" -NoTypeInformation -UseCulture
  

• Satellite P200-RT2 - need help with recovery

  I made a Boo-Boo and need advice/help to get things fixed.

  My husband has a Satellite P200-RT2 running Win XP 32 bit (included with Vista, but had been upgraded). The battery needs to be replaced, does not load and he made the mistake to disconnect while it was closing, but had not closed completely. Laptop computer would not start even in Safe Mode.

  So, I thought to try to insert a disc Win XP Pro thought, he would work to restart the computer and start again. No, he took over and completely restructured the laptop. If great, now have Win XP Pro on it, but can not load all Toshiba drivers that I downloaded from the Toshiba site.

  I was not in a position to know if there is a specific order to load the drivers... have been reading and wonder if the BIOS should be the first?

  Needless to say that the Toshiba recovery software went on the P200-RT2, I can't find a separate drive that supposedly it contains, there are only two listed drives, drive C and D (for DVDs).

  Toshiba tells me that Microsoft sells the recovery software, MS told me that Toshiba sells. There are sites online that have the recovery disc for Vista I could buy or download, but I'm not sure on those that are reliable/safe.

  Have to mention that I have a Toshiba laptop latest (L675 - 40 X, Win 7) and have the recovery disc for it.

  Is it possible to use these recovery disks for Toshiba software loaded on the old P200-RT2?

  Any help is greatly appreciated!

  If I could get the XPPro to work, which would leave as OS... but I don't know where to find the drivers.

  Satellite P200 - RT2 PSPB0C is a Canadian model.
  But the same model was released in Europe under the model number:E PSPB0

  You will find all of the Win XP drivers on the Toshiba UE driver page:
  http://www.Toshiba.EU/innovation/Dow...ivers_bios.jsp

  Choose:

  • Archives
  • Satellite
  • Satellite P series
  • Satellite P200 PSPB0
  • PSPB0E
  • Win XP

• Satellite P205D-S7802 - need help with Wi - Fi

  I have a Toshiba Satellite P205D-S7802. I had windows Vista on it, but the time has come to reformat.

  I tried to do just the recovery disk to reset it back as long as the factory, but after using the disk a discovered I do not know where disc 2 is therefore due entirely reinstal bootleg windows xp pro.
  But now I can't figure out how to get my wireless connection to connect to it. I don't even see the wireless icon or the available tab.

  Is there a driver I need to install or what?
  Thank you for your help

  Hey,.

  Normally after the installation of the Windows operating system with a Microsoft disc, you need to install all the drivers for the hardware. So do you have yellow exclamation mark in Device Manager?

  I think that you need to install the WLAN driver too. You can download all the drivers page Toshiba or Toshiba WLAN to WLAN card Portal: http://aps2.toshiba-tro.de/wlan/

• Satellite U940 - 11b - need help with recovery files

  Madam/Sir,

  I have a question about a failure U940 - 11 c.

  The laptop crashed after be closed during recovery of windows procedures. I think that Windows is damaged, as a result, the laptop no longer starts. When turing the laptop on the following message is displayed: reboot and select proper boot device. See the image below:

  Files on the hard drive are very precious to me, so the hard drive can not be reset until I got the files. I tried to recover the boot files Ubuntu from a USB flash drive. Ubuntu began without any difficulty. The problem is that Ubuntu is not able to find the Windows hard disk. From Gparted, the following errors occurred:

  1. WARNING: / dev/sda contains the signatures of TPG, indicating that she has a GPT table. However, it doesn't have a valid fake msdos partition table, as it should. Maybe it has been altered - possibly by a program that does not include the GPT partition tables. Or maybe you deleted the table GPT and are now using a msdos partition table. It is a GPT partition table? :

  2. the GPT backup table is not at the end of the disc, as it should. This may mean another operating system to think that the drive is smaller. FIS, by moving the backup at the end (and revmoving the old backup)? :

  3. not all the space available to/dev/sdb appears to be used, van correct you the GPT to use all the space (special edition 39007920 blocks) or continue with the current configuration? :

  4. the disk is allocated:

  Do you have tips or advice that could help me get the files from the hard drive. I do not understand the errors and will not be able to solve this problem. Thanks in advance.

  Hello

  I suggest that you use the tool to disks in Ubuntu to mount your Windows partition.
  If the partition is damaged in an aborted recovery (or other reason), you will need to invest a lot of time and effort to successfully recover your data.

  Tom BR

• Satellite M60-159 - need help with RAM

  Hello
  I have laptop M60 - 159
  Now I have inside 512 MB RAM 2Rx16 PC2-4200 s-444-12-A3 SAMSUNG
  I know that this notebook can use 2 x 1 GB
  Please someone tell me what the faster RAM, can I put?
  This? GOODRAM DDR2-667 PC2-5300 SODIMM 1 GB?
  Better or worse?

  Thank you & best regards

  Post edited by: adrian351

  The point is to use Rams compatible and not faster. If speed of the FSB 533 MHz is there is no sense to use faster RAM.
  "So we are going to discuss here on the best solution for you;).

  Compatible 1 GB of RAM for your Satellite M60 is with PA3411U-1M1G part number.

• Satellite A200 - 24 - need help with ad - hoc connection

  Hello

  I have a Toshiba Satellite A200-24 which is connected to the internet via ADSL.

  Also, I have a laptop and I want to share internet between them in my apt.
  In Win XP it should do so through the Connection Wizard, but in vista, it is "ad hoc connection".

  However, when I try to do, I get a message that windows cannot create my new network.
  I have searched all over the net for a solution and those who have the same problem as me.

  Have computers with Satellite...

  Hello

  I think you should check this page:
  http://www.LyteByte.com/2007/02/21/how-to-share-one-Internet-connection-with-another-computer-using-Vista/

  Here you have find some information and details (screenshots) how to share one Internet connection with another computer using Vista?

  This page could also be interesting:
  http://thehiddenguide.com/how-to-share-two-computers-with-one-Internet-connection-on-Vista/

  Please post comments!

• Satellite P850-30V - need help with update drivers

  Hello

  Tempo said there are new drivers for NVIDIA and LAN Wi - Fi. I have download extract it the files and they run, BUT the drivers have not been updated and tempo continues to tell me there are updates.

  I play diablo 3 and when I run the game it tells me that my video driver is outdated.

  Help, please

  If everything is working properly you should not install any update, especially not the driver WLAN.
  You have problems with the WIFI connection?

  With the game is a little problem. On mobile units (portable computers) display are preinstalled drivers supported by the laptop manufacturers. The game will be the latest version of the driver from the manufacturer of the graphics card but they don t support drivers for laptops... it's a little complicated.

  My advice to you: If everything works fine and you don t have serious problems disable Tempro.

• Need help with uninstalling Windows 8 on Dell Inspiron 531 PC.

  Help! Install Windows 8 on my PC without saving Vista (mainly because I thought that I would never use it again). However, absolutely, I hate Windows 8 and want to reinstall Vista but I can't find the installation disk that came with my PC. Is there another way, I can do?

  Reference Dell will send the owner original diskettes for installation in the United States.  There may be a small fee. You can even borrow a Dell vista reinstall the disk of the same version and use your own key. It's on a small sticker on the tour.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/en/backupcd_form?c=us&CS=19&l=en&s=DHS&redirect=1&DoNotRedirect=y

• Need help with CSS Fonts and AP Divs. (separate issues)

  Hi all

  I have two BIG problems that I just can't understand at all. No matter what I do, nothing works for eith er from these two very different problems.

  I am running Windows7 and using Dreamweaver MX and CS4 (cannot afford to upgrade).

  A problem

  Colors of the fonts, size and Styles. I ALWAYS end up resorting to MX to solve these problems. I need fonts of different colors for the various paragraphs, I also need to sizes and styles. But change always changes. I went in the CSS panel and tried to change it, but no luck. I tried the option "Compound (depending on your selection)", but not chance it. The problem is that CS4 CSS Forces on the reguardless of the user, if they need it or not. The only thing I need CSS for is Accordians, Flash, Drop menus, etc. But when it comes to simple, flat, HTML I have more control as I do in MX. I ALWAYS start a new project as a file HTML but CSS is automatically applied to the entire site.

  What Miss me?

  I need to remove MX, but not until I find this CSS problem.

  =========================

  Two problem

  It is nothing new to most here, I'm sure. The demand for Flash Pop Ups that convert a banner (Style Yahoo) has increased and demand has flooded my ears of the customers. The largest is UGAI. Who has site was created in MX in large part due to the above problem. Advertisers want flash ads full Page that are small and pop up when you fly over its advertising HTML normal or that fills a space and plays Flash runs and then uses their Flash banner to reveal the entire site again. And they are willing to pay BIG for this seemingly simple feature.

  How to make this work? Dreamweaver allows layers/overlays which I can apply transparent in Flash. Also known as a "Div. AP" but these layers keep jumping around. It's even worse when seen in different resolutions. I can get the overlays work perfect on MySpace 1.0 profiles, but not in Dreamweaver or manually via Notepad. And no matter if I'm in MX or CS4.

  PS: I spent MX to CS4 soon as CS4 came out. CSS has proved to be a pain, and now I have to learn CMS (Joomla) as well. All on my own.

  > _ <

  This is a CS4 site created still early in development.

  Thanks for any help,

  Richard

  Problem #1-

  Mylenium says, knowing how to use CSS to style your content is the basis for modern web design. Stop relying on old-fashioned, obsolete HTML style tags. that makes the code invalid, swollen and inflexible work later.

  Let's say you have 3 paragraph styles you want to use throughout your web site: red, green and blue - colours used here for demonstration purposes only.  Simply set the 3 paragraph styles in your external stylesheet and link your HTML pages to this physical file.

  CSS code:

  . Red p {}

  color: Red;

  make-weight: bold;

  }

  . Green p {}

  color: Green;

  make-weight: normal;

  }

  . Blue p {}

  color: Blue;

  make-weight: bold;

  }

  HTML:

  It's Red and "BOLD"

  It's blue and "BOLD"

  In the meantime, it's normal text with red textgreen textand Blue .

  How to link an external stylesheet to pages HTML in DW-
  

  http://ALT-Web.com/demos/DW-link-stylesheet.shtml

  Problem #2-

  You can do it quite easily with a window system modal JavaScript as Floatbox
  

  http://randomous.com/floatbox/demo

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB
  http://ALT-Web-design.blogspot.com/

• Need help with while loop and shift registers

  I have a broad set of data and required to read data at maybe 200 samples at a time to process these samples through my VI and have add and concatenate a file separate lvm.  The part where I am confused is the shift registers. How can I limit the number of samples read in an iteration? How do the while loop to stop when all data are read in?

  I have attached my diagram, there may be something wrong with my technique?

  This will give you an idea.  There are a lot of other (probably more effective) methods.  It is a basic solution, quick and dirty to help you grasp the overall concept.