Satellite M30-304 - no WPA WPA2 not listed in XP SP3

Similar Questions

• Need good drivers for Satellite M30 304

  I have a Satellite M30-304. I rebooted the laptop and formatted everything, including pilots. Unfortunately I have lost my CD of restoration as well. So, I tried to download it online on the official website but I downloaded the wrong drivers making my laptop more low and I can't even use my special functions of the keyboard and my screen become darker.

  Does anyone know how to download the right drivers and whence?

  Hello

  In my opinion the wrong drivers are not responsible for these problems, but of course, you should be 100% sure that you have installed the correct drivers!
  Unit you seems to be a part of the PSM30E series.

  Need to select the model of laptop and this part number in the download form. All that s

• HDD upgrade for Satellite M30 304

  Hello

  I have a Satellite M30-304. It has a 40 GB hard drive and I would like to upgrade to 120 or 160 GB.

  Could if it you please let me know the specification of compatible drive for M30 - 304?
  Can what max HDD M30-304 capacity have? Detailed specifications would be useful.

  Thank you.

  I doubt you could use a 160 GB HARD drive.
  I recommend you to check a 120 GB IDE 2.5 "HDD.

  The point is that the HARD disk controller supports the 28-bit LBA and bigger hard drives as 120 GB will not be recognized by the BIOS.

  So in my opinion the 120 GB is the largest HARD drive that can be used.

  Also check some threads here in the forum.
  That is to say:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=71972𑤤

  Good bye

• Satellite M30-841 - large hard drive not recognized

  HY guys,.

  First of all, I want to say hello, because this is my first post in this forum. Merry Christmas as well!

  I am writing because I bought a 160 GB 2hard disk to replace my old 60 GB. When I troed to install it, I saw that it recognizes just 128 GB which, according to my research, is due to the LBA 48 bit not supported on my laptop (Satellite M30-841).

  I tried to everythingmentioned:
  -J' have flash Bios o update the 1.70 (last available driver toshiba Web site)
  -J' changed the downloaded XP SP3 and I changed the registry to install a key DWORD EnableBigLba.

  However, she still recognizes only 128 GB. I'm losing hope to install the new hard drive. Anyone of you has a suggestion that I should try?

  I realized that I should update the driver of my motherboard, but I don't know where they are, if there is (I don't even know the name of it, despite the use of everest - which shows DMI.

  Am I missing something?

  Thank you very much

  Icemaster

  Look, man.
  The HARD disk controller seems to support the 28-bit LBA.
  The disk controllers HARD supporting the 28-bit LBA address max 128 GB HDD.
  Controllers HDD support 48-bit LBA address bigger hard drives.
  But this is a physical limitation and you will not resolve this update anything.

  In your case, there is nothing to see

• Sporadic satellite M30-304 USB failure mouse

  Have the laptop above under XP. After that 2 years running a mouse USB laser without probs, suddenly the pointer stops for a few seconds, then takes over again, stops, starts etc. Very maddening. There is an error message saying every so often the device connected to the USB port is not installed correctly.

  I uninstall the software for the mouse and the re - install, run all my anti-virus software and Tracker, still the same problem. the trackpad still works fine, so I decide it takes the mouse and buy a new one and install it. It worked fine for a few weeks now, so today the same problem!

  Did he have the same problem or know a solution?

  Hello

  I don't use a Satellite M30 but a Satellite M40.
  I use it for a year and I have no problem with my mouse.
  I can't believe that the laptop has a malfunction, because as you say in your announcement of new mouse worked initially.
  I have no idea why your mouse pointer stops. Maybe the mouse driver causes a strange failure.
  You can also try to remove the shape of USB ports, Device Manager.
  After restarting again the operating system should recognize the USB ports again with a standard configuration.
  Then, you can try to reconnect the mouse.

  You can also try to use the mouse without having to install the drivers for mouse manufacturing delivered. Check it out

• Satellite M30-604: USB Port can not find the driver

  Hello

  I keep having the same problem on my Satellite M30 604 when connecting to a USB device.
  It does not really matter with this kind of device, the problem still.

  Whenever I have insert the USB plug into one of the slots, my home XP keeps popping up the wizzard software.
  Even with devices without drivers such as USB keys, it keeps bothering me and finally tells me that it cannot find the right driver.

  If I try to install a printer, it installs the software found, but finally stops the operation because it can't find the driver (?). I don't know in what direction I should look at to solve this.

  So if anyone can help me on this, I would be very grateful!
  Edwin

  Hello, Edwin

  It's very strange because it is not necessary to install a USB driver and standard Microsoft USB driver should work well. I put t know if this can help, but please check this page

  This fix is also part of the factory settings (recovery image on the delivered CD). By the way: your device is about three years old and it will be interesting to know since when you have this problem. Just for example: I have more Satellite 1900 with USB 1.0 and use USB keys and drive external HARD without any problem.

• Satellite M30-304 - strange questions after BIOS update

  Hi all

  I updated my BIOS according to the good driver for Satellite M30. However, since this operation took the endless problems with screen and wireless card. Also the screen used to display flash BIOS only now them a Centrino, Centrino logo sometimes sometimes Mr. Pentium, I don't know that the version of BIOS is incorrect for my laptop. If I try to re - install the upgrade, it is said version already installed 1.7, so will not continue.

  1. is there a way to force the re - install the same version?
  2. someone can the upgrade me of the correct BIOS Setup for the model n ° PSM30E-0QKJ1-5U, I installed the version was 20070807154017

  The history is quite interesting. AFAIK Centrino logo is there if the Centrino platform is in use.

  The Centrino platform consists of:
  an Intel Pentium M processor
  a chipset Intel 855 of the series
  an Intel PRO/Wireless 2100 or later 2200 (IEEE 802 11 b) mini-PCI wireless adapter

  If a component is removed (Intel PRO/Wireless mini-PCI wireless adapter) the Centrino logo will disappear. I don't really know why logo is from time to time, but you did the right BIOS update. There is no other for your laptop model.

  Can you please tell me what is the problem with your wireless network adapter? You can use just sporadically or what?

• Satellite Pro U400-SP2804 - Microphone is not listed in the volume control

  Hello
  I can't listen to the microphone from the speaker, because does not appear micro in the Volume control

  On the start menu< control="" panel="">< audio="" devices="">< advanced="" properties="">< volume="" control="">< properties="">

  Mixing: Conexant HD Audio output

  Volume controls:
  Volume control
  Wave
  SW
  CD

  But n - t apeear option microphone or line

  My sound card is Conexant High Definition SmartAudio 221

  I was reading, and I think the problem is: it doesn't have a key in the windows registry value, someone help me, thanks

  I did: reinstall the driver, uninstall the driver and put another card sound, change the operating system, works wth 2 sound cards, portable computer, import registry values from the other laptop. but does not solve the problem.

  My problem appears with Winodws XP 2002 SP3 and Windows Vista professional

  Hello

  The port microphone or line is not because you are looking for this audio * output parameters.
  The microphone is a device of entry so it s not who listed there.

  If you go into the volume settings > options > properties you can switch to HD Audio input.
  Now you can change the volume of the microphone! :)

  Good bye

• Satellite Pro M70 - WLAN adapter is not listed in Device Manager

  Hello!

  I just formatted my drive and reinstalled Windows xp and now I can't turn on the wifi. The light is on and the switch is on but it does not work.

  I downloaded all wlan drivers but nothing has worked. In the Device Manager I also can't find any WLAN card. In device manager there is an icon * devices * with a qustion-mark and he said * network control *.
  This is the WLAN card.

  Until I reinstalled Windows it worked fine so the problem is not mechanical.

  Help, please. my laptop satellite pro m70, don't model no psm76e/00e005g3

  Hello

  If the normal LAN card is already recognized correctly need wireless network card, then you should try to install the WIRELESS driver from the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In addition, the local network card device can be activated with the hardware switch on the computer laptop and FN + F8.
  Check it!

  Good bye

• Satellite A100 CD/DVD drive is not listed in the BIOS or Device Manager

  1. the original drive does not work. After inserting a disc shines the light of the drive and it runs - but nothing else.
  A little investigation shows no optical drive listed in the BIOS or Device Manager (naturally).

  2. perhaps I would reinsert the disc, but I can't find any instructions on internet about this disc removal/replacement.
  Or in the operating manual.

  Can someone direct me to these instructions?

  Thank you very much

  S manual is not the same thing as maintenance manuals. Please note that this is not the same and the exact description on laptop procedure disassembly is only authorized service.

  Anyway, as far as I know the optical disk drive is fixed with a screw and it can be removed from the underside. The screw is placed near the cover of exact memory on the optical drive. Not on side cooling event, but on the other side.

  Be careful because everything you do is at your own risk.

• With the help of SD on Satellite M30-304 cards

  I tried to use an SD card for the first time. The ability of this card is 2 GB.

  After inserting the card and this card in 'My computer', double click, a message arrived that the card is not formatted and I want to do. I chose to get into shape and a message says: 'this card cannot be formatted. When I click with the right button on this map in 'My computer' and chose the option of Toshiba format the SD card an error message came as 0x0340FF00 error code.

  I also put an SD card containing the files (from my Palm PDA) and tried to open it, but the message came as "this card is not formatted.

  Can someone help me, please?

  BDC

  Hello

  I know not all SD card sizes are supported.
  I m does not quote sure what max SD card format can be used in the slot of the M30, but probably 2 GB of SD card is not compatible.

  However, you said that you want to format the SD card, but have you tried to use the format utility Toshiba SD memory card?

  Please check this!

  All the tools and drivers are on the European driver Toshiba page.
  But note; M30 drivers have been moved to the Archives!

• Satellite M30 - TV OUT button does not work

  Can someone help me?
  I have format my M30. I install the drivers on the CD with also the Toshiba console key.
  When I opened the window of the console, TV, have as last voice, a TV output via I can choose the function of this button.
  This menu, do not all "TV out" functions.
  When I press the TV out compare button a window asking me to associate a function with this button.
  Obviously the TV output do not work.

  Thanks in advance for any answers.

  Ivan79

  Hello

  I guess you mean Toshiba command buttons.
  Go to the control panel and select the Toshiba control utility.
  There you should find a TV key which must be set to output TV out

  I think this should solve your problem.

• Satellite M30-304: during playback DVD no picture

  Hello
  I know it sounds like a silly question, but I can't play DVDs on my laptop. The soundtrack plays normally but I get no image. I tried with Windows Media Player 11 and WinDVD 4. I'm getting just a black screen with the music and the ongoing dialog boxes.
  Maybe its just me not doing things right, but he should not run automatically? Help!

  Hello

  This problem occurred before you install Windows Media Player 11?

• Satellite M30-304: no start!

  I CAN'T START MY LAPTOP M30. I USED IT FOR ABOUT AN HOUR ON BATTERY YESTERDAY AND HE WENT TO EMPTY. I TRIED TO RESTART IT, BUT ONLY HAS 2 LIGHTS BLUE ON THE FRONT. HOW CAN I RESTART THE COMPUTER, IT SEEMS ONLY Y HAVE NO ANSWER EXCEPT POWER LIGHTS.
  I HAD A PROBLEM SIMILAR ABOUT 6 MONTHS AGO AND I HAD TO RETURN TO RESET THE BIOS. I CAN DO MYSELF?

  Thank you very much

  Hello

  Remove the battery for a short period and try to restart the device. If the battery is empty, plug it into the power socket and charge the battery. In my opinion, you must charge the battery 12 to 24 hours.

• My Satellite M30 304 and these buttons that never work!

  Hey, I can't get my multimedia buttons on the front of my laptop to work.
  As far as I know, everything is up-to-date with Windows XP Home Edition, and I downloaded the driver from the Web site and tried again and again.

  Any ideas?

  Hello

  You reinstall the OS using the recovery CD? If the OS is installed from the recovery CD all tools & utilities will be installed properly and you can use all of the buttons. Also, try to reinstall TOSHIBA controls V3.01.0400. You can find it on the CD tools & utilities.