Satellite M40-185 - Bluetooth is not ready - can not use

Similar Questions

• Satellite M40-185: DVD super multi drive does not read the CD

  I own a Toshiba Satellite M40-185. It is mounted with a carpet * a DVD-RAM UJ - 831S.
  When I put the CD - R, which are supposed to work on this drive however it read as a CD - R [i.e. the icon changes from DVD - RAM drive in my computer to a CD - R]

  However, when you double-click the drive it says D:\ accicble not. But it works fine with DVD.
  Recently, I found that it stops between buring DVD as well. I got the replaced disk from Toshiba, but it was not to last long either.
  I wonder if his software level problem.

  I tried to update the firmware but it does not work because it's another drive for this what is mentioned on the website for drivers...

  Maybe it s only a registry error?
  I read different statements here in the forum and especially the deletion of in the upper and lower registry filters helps to address these issues.

  For more information, see this page of Microsoft Knowledge:
  http://support.Microsoft.com/kb/270008/en-us

  Completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  and then restart the laptop

  Good luck

• Satellite M40-185 - how to boot from USB?

  I have a Toshiba Satellite M40-185

  I could not a off of usb because the two Mafany usb boot option

  Options for the device
  1. HARD DRIVE
  2 CD-DVD
  3 FDD
  4 LAN

  How to boot from usb?

  Hi esc.

  I think that you have answered the question yourself because you've posted all the startup options that are available and there is no option to boot USB on this laptop.

  All you can do is to install the latest BIOS, but as far as I know Satellite M40 can t boot from USB!

• Satellite M40-185: fake keyboard settings

  I had to format my laptop (satellite m40-185) and then I install Win Xp sp2. I did not use the recovery CD because I have lost: (.) I download and install the proper drivers and the only problem I have is with the keyboard. Some buttons are not in the right order.

  For example I press shift + 2 must type, put in place there type @. Anyone knows it I can find the appropriate drivers for this problem?

  Your keyboard is set to the United States. If you go to the control panel (keyboard), you should be able to change that for the United Kingdom.

  Richard S.

• Black screen on Satellite M40-185

  After that a few months of problems with switch-offs sudden finally my Toshiba Satellite M40 - 185 is a black screen and it cannot do more. I have an external monitor, but it is also black.
  Should I try to get a new LCD inverter or leave the Toshiba service get it and look at the motherboard?
  Maybe its completely dead?

  Any help and suggestions welcome!
  Dimitris

  Hi Dimitris

  If the result is the same laptop computer s screen and external monitor it's probably serious hardware problem and fair service can help. I guess that the graphics card is the troublemaker and I fear that the motherboard must be exchanged.

  Of course, I can't say that for sure. Because of this that the technicians run diagnostic programs to see what is the problem with your laptop.

• Satellite A305 S6837 - Bluetooth is not ready

  Hello

  I'm not sure that I need an additional Bluetooth device for my computer laptop or not, but I used to have Bluetooth mentioned in Device Manager, after downloading the newest Bluetooth Stack but he disappeared and I wonder to connect my bluetooth device.

  I downloaded the new battery because I received the message "bluetooth is not ready" when you try to turn on bluetooth with the old version.

  Hello!

  You have Bluetooth activated with FN + F8 and switch wireless on the laptop (value on)?
  Check it!

  For latest Bluetooth driver, see Bluetooth Portal:
  http://APS2.toshiba-tro.de/Bluetooth/

  Good bye

• Satellite M40 - 114 bluetooth systemboard question

  Hi all

  I have question regardin my bluetooth and the motherboard.

  Center of Service Toshiba has replaced the motherboard in my laptop.
  I can't turn on my bluetooth for the replacement of the motherboard. FN + F8 doesn't work and bluetooth stack reports ' bluetooth device is not ready ". reinstalled XP via orginal Toshiba CD-ROM. But does not help.

  I discovered something strange, is that in the software sis sandra 2005, my laptop is reconignezed by satellite A40 PSA40U. They replace the motherboard with an old model? This could be the reason why the bleutooth no longer works?

  Your help/advice is necessary. Thanks in advance

  Hi phyl

  As much as I know Satellite M40-114 doesn't have Bluetooth and I can't understand this before the replacement of the Board of Directors the Bluetooth system was on board. I know that the M40-193 has a Bluetooth.
  Please check this topic http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=5071. There is an interesting discussion on the M40 and Bluetooth.

  Good bye

• Satellite A100 - Sk4 Bluetooth or not?

  Bought an A100-SK4 a month ago and no one can say with certainty it is has Bluetooth or not. Try to enable it from the Bluetooth Manager gives message Bluetooth is not ready... Help.

  Thank you. James.

  Hello

  Please check the bottom if the unit. If there is a Bluetooth label so the Bluetooth module is available.
  If there is no label then you unit doesn't have Bluetooth.

• Satellite M40: Hibernation Mode does not work

  Hi all

  My satellite M40 does Hibernate. If I choose the Hibernate function, my screen tells me that the laptop is in hibernation. But then after that it is not closed in hibernation, not he again! I can't Hibernate! Sleep mode functions! A few days ago I had uninstalled by mistake "common modules", but then I reinstalled it. Could someone tell me what drivers are needed for the hibernation?

  Is this a driver problem? And why Windows checks my HD every other time I start my laptop. I found no other problems then the hibernation and verification of the HD. Do I have to uninstall all the Toshiba drivers, including common modules and reinstall all the new? It would solve my problem? Or should I just try with a BIOS update!

  Best regards and thanks for your help!
  YLS

  Hello

  I think that the resettlement of the damaged common modules might be a reason why hibernation doesn t work properly.
  To my knowledge, the common modules are very important for the good condition of all Toshiba Utilities market.
  The Toshiba Power Saver controls standby and hibernation. So I guess it's also the common modules.
  But the common modules must be installed in a first time prior to installation of other public services.

  It s very strange that the Windows checks each time you HDD. It seems that there are corrupted files or sectors on the HARD disk. Maybe that's why hibernation doesn't work because the hibernation saves the State on disk.

  However, the new installation of operating system from the recovery CD Toshiba should solve your problem, but before you begin installation you need to make the backup of all your data and files.

  PS: first try the chkdsk/r option. This should repair the bad sectors on the HARD disk. Maybe you do not need to reinstall the operating system.

• Satellite M40: Sonic RecordNow does not recognize the carpet * CD/DVD player

  Hello
  I have a satellite M40. The software sonic recordnow (version 7.31) not found cd/dvd writer.
  I check toshiba support and find a new update for Mat * a dvdram UJ 841 S. So I downloaded. But when I run it, an error message is displayed: "the target drive is not connected. How can I solve this problem?
  The thng is my cd/dvd drive works well: I can play videos and music CDs. I can burn dvd with dvdx soft. BU I want sonic difficulty.
  Thank uou for your help.
  NAT

  Hello

  The firmware update will NOT fix the problem of sonic!
  The firmware has nothing to do with this problem the firmware contains details and more information about the supported and compatible CD/DVD.

  I presume that some sound files or registry keys are corrupt and so the drive may not be recognized correctly by Sonic software.
  I recommend reinstalling the software Sonic!

  But why you don t use Nero burning program? In my opinion it of the best software for burning. I also use it and I'm very happy!

  You should try it

• Satellite T100-107 - after update driver, I can't use Bluetooth

  Satellite T100-107/getting updated driver killing Bluetooth windows 7 64 bit running.

  Started toward the top of my new laptop, did all the microsoft and Toshiba updates and bluetooth does not work.
  So I did a reinstall of the hard drive to the top, did all the updates and got the same result... bluetooth sees devices, but does not connect.
  I have read all the threads here, no solutions. I messed with the settings, tried 4 different devices (mouse, telephone, headset another laptop); no difference. More rolled back a lot of pilots.

  Then I reinstalled from the hard drive again once does no update at all and all devices are now connected
  BUT, of course, I need to make updates.
  If anyone has any advice on which you could give me this question?
  If this isn't the case, I'll have to do each update singularly and check that I can always connect via bluetooth.

  + Thanks for reading XX +.

  Hello

  Have you tried to reinstall the new BT stack, after doing the update in Win 7?

  The new BT stack can be found here:
  http://APS2.toshiba-tro.de/Bluetooth/

  Welcome them

• Satellite M40: USB Audio does not work properly in ACPI mode

  Hi all
  I just bought a laptop Satellite M40 whose purpose is to be used as a portable audio system.
  For this, the USB audio devices are an excellent solution.

  Unfortunately, although it was working properly when recording (sound is perfect with all devices compatible USB Audio, I have tested), there is a problem in reading that I had a lot of clicks and POPs.

  After a lot of research trying and google, I solved the problem by changing the computer ACPI PC Standard mode.
  This is a workaround.

  But this way, I don't remember what my status of battery, and my laptop does not shut down automatically.
  Actually, my laptop is no longer run as a laptop :(

  I suspect a very serious problem in a Toshiba components management. In particular, I wouldn't be surprised to be told that freeze the cords of some regular system of court management, and therefore the 10ms buffers audio USB fall in against the recess.

  This would be so much bother me if I were not part of the technical support team of the company that launches also a few new audio USB products who will not fail to work correctly with laptops.

  My question is:
  Is there a driver / updating bios that gets rid of this problem?
  If a person of Toshiba technical support to address this issue directly with me, I'd be happy to help, as I am personally and professionally concerned.

  Thanks in advance.

  [Edited by: admin]

  Hello

  I put t know what USB audio device you use, but most of the USB audio devices cannot use the USB power. These devices have need of an external power supply of A.C and especially this external power supplies are delivered with the USB audio device.

  Also, I read on some sites that the pop occurs sometimes due to non synchronicity of the modules different buffers or / and of the use of certain applications in parallel.

  The computer ACPI PC Standard mode change is one of the many solutions and proposals
  You can check some patches from Microsoft. Check if all updates from Microsoft are installed.
  Also change the performance options in the options of the system to adjust for best performance.
  Disable Windows messenger.
  Virtual memory should be set to custom size and initial size and maximum size must has the same value (ie. 512/512)
  In the system.ini should the vcache is also the same: MinFileCache = 16384, MaxFileCache = 16384
  Disable the peripherals such as scanner, printer.

  As you can see, these issues could occur on all computers (desktop and laptop) and it s is not a problem of Toshiba. Also, contact the manufacturer for support external audio device and detailed information.

  Good luck

• Satellite U400-17Y - Bluetooth does not work after upgrade to win 10

  Hello

  I have improved my Windows7 laptop at 10 now. While upgrading to windows 10 he messaged device RFCOMM Bluetooth may not work with Windows 10. So now, my laptop Bluetooth not working do not. Opening of Bluetooth, it shows "Error-ECCentre-1.exe - Application Error (Oxc000007b)". Currently installed Bluetooth Stack is - v8.00.12 (T).
  My Toshiba laptop is Satellite U400-17Y.
  Kindly help please as soon as possible.

  Concerning

  Hello

  I have improved my Windows7 laptop at 10 now. While upgrading to windows 10 he messaged device RFCOMM Bluetooth may not work with Windows 10. So now, my laptop Bluetooth not working do not. Opening of Bluetooth, it shows "error-ECCentre-1.exe - Application Error (Oxc000007b)". Currently installed Bluetooth Stack is - v8.00.12 (T).
  My Toshiba laptop is Satellite U400-17Y.
  Kindly help please as soon as possible.

  Concerning

• Satellite S50T-A - Bluetooth is not working properly

  Why the Bluetooth does not work in laptops Toshiba Satellite S50t-A?
  It sends data, but does not receive any! and says still 'not connected' to paired devices.

  Hey mimo

  After reading your ad, I tested BT with my S50 - B Satellite and I noticed the same situation.

  The first thing I did was check software BT. Originally was pre-installed Intel Bluetooth Filter Driver Package 3.0.1342.02 version. I ve removed from the system and installed Intel version 17.0.1428.01.

  After doing this paired phone has successfully connected and logged status was there.

  I tested send and receive files, and it works without a problem.
  When you want to send files from your laptop to the mobile phone, for example, click with the right button of the mouse on the file saved on your laptop and choose send to > Bluetooth device.

  In the case where you wish to receive the file from the mobile phone to the laptop, click with the right button of the mouse on the BT symbol in the taskbar and select receive a file. After that make you will see the transfer of BT file on the screen window. Select the file on your mobile phone and send it using BT connection. On the screen you will see download or transfer process. When finished just browse in the right place and you will find files all transferred there.

  An interesting thing is that, after some time my cell phone is listed as not connected (to manage Bluetooth devices), but everything works fine.

  Please test and send feedback.

• Satellite M40-185: recovery CD works, now have serious problems

  The problems started like this: once I sent the computer to sleep mode, and when I tried to reboot, the OS has not loaded (black screen just after the BIOS welcome screen). Safe mode etc. did not work as well.

  I ran PartitionMagic 8 of bootable CD, and he pointed out an error on the Disk - Partition disassembled or smth like that.

  PartitionMagic could not format my HARD drive (error reported during progression), so I decided to use the recovery CD. He could not recover the HDD-reported "unable to load FILE_BITMAP MFT" during the first minute of the recovery process. I tried all modes of recovery - nothing has worked.

  Then I did a weird thing - I used an other M40 recovery CD, with 60 GB HARD drive (mine is 80 GB). Surprisingly, M40 another recovery CD could format and recover the system! Then I applied my recovery CD and it worked and system has been installed and working now.

  But the problem is that now my os partition 60 GB. Really, what scares me, is that I can't use PartitionMagic now! During loading, he pointed out: the drive letter of the Partition cannot be identified. and write-offs of loading.

  What is more, the system is now very unstable: i.e. the sleeping mode sometimes hangs system, Office 2003 is to report errors and does not (this copy worked fine before formatting).

  Could you advice me what software to use to solve the problems of partition?

  I can't go to Toshiba service as I am not in the country where I bought the PC, and there are some problems with the service where I am now.

  Hello

  Have you tried to use the "sleep" after the recovery procedure before installing other applications?

  As far as I know there may be a problem if a employee of application or active processes don t support hibernation and don t want to get arrested. Please don t worry about 20 GB of free space on your HARD drive. You can turn on is that the second partition as logical drive.

  S ' please go on my computer on the desktop
  -Click with the right button of the mouse and choose the option Manage
  -Under storage select disk management
  -L' free space should appear, click with the right mouse and option to create the logical drive.

  Please try to do it. If you have no success please write again.

  Good bye