Satellite M50-A-110 - wireless turns down running 8.1 Win

Similar Questions

• How to order screen for Toshiba Satellite M50-A-110

  Display on my M50A110 has been broken, and I want to order a new. How can I order this part?

  All the info I have on it are specs on toshiba.com and I'm not sure if that's enough (screen size: 39.6 cm (15.6-inch) type: screen Toshiba TruBrite® HD TFT high brightness with 16: 9 aspect ratio and LED backlighting internal resolution: 1366 x 768)

  Given that I can't find option change anywhere, what I really wanted to ask is what is the part number display on the order of display for Toshiba Satellite M50-A-110? I don't have tools with me to disassemble, and I want to order the part as soon as possible. Sorry for the spam of this thread.

• Access to Boot to install Satellite M50-A-110 problem

  Hello

  I just bought a Satellite M50-A-110 and wanted to install Win 7.

  Problem is that I have difficulties to access the bios press F2, esc, or DELETE...

  It worked (twice) if I could change boot USB (with a bootable USB key that I used on other computers to install win 7), still does not begin to earn 8...

  So I formatted the hard drive to get rid of all the partitions and win 8.

  Replaced the hard drive, insert the USB and now I have this message:

  "Reboot and select proper boot device."
  or Insert boot media in selected boot and press device any key..."

  So my questions are:

  -Are known issues with the m50-a-110, in the start menu? and what is the key / key combination, that I push?
  -This would be installing win 7 can only be achieved with a USB 3.0? (2 slots USB 3.0 and USB 2.0)

  Thank you for your help in advance and good luck,

  Hello and thanks for the comments. On a site I m happy to know that you have solved your problem, but on the other hand, it is not the best solution.

  Have you really taken apart your laptop to access the CMOS battery? I mean, after this action, your warranty is no longer valid.

  On this forum you can find numerous threads about the same question, where is explained what needs to be done about it and what steps are required to install Win7 on new models of laptops with preinstalled Win8 / Win8.1.

  What needs to be done first is the full stop - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
  After doing this, it is possible to enter the BIOS settings and change the secure boot settings.

  I just hope that you have created a recovery (DVD or USB) media until you have formatted your HARD drive.

  In any case, good luck with your machine.

• Replace HDD on a Satellite M50-A-110

  Hello

  I just bought a new Satellite M50-A-110, and I wanted to replace the HARD disk provided with the laptop with my existing SSD.

  Unfortunately, there is no way (that I could find) to reach the HARD-drive Bay.
  In previous versions I could replace hassle at all, but here the whole bottom panel is in a piece of plastic that I couldn't remove.

  Can someone help me please?
  Is there a trick to remove the bottom panel that I'm not aware of?

  Thank you for your help in advance and good luck,

  Hello

  Well, the HARD disk and memory modules or battery are placed under the plastic cover at the bottom of the unit.
  You will need to remove the cover and plastic to get access to these parts.

  To my knowledge, there are 12 screws that fix the bottom cover.
  Then you could gently remove the lower logic of the top by lifting the edge of the lower part of the right angle.

• Satellite M50-A-110 does not recognize the new SSD?

  Hello

  I bought the M50-A-110 model and tried to replace the HARD drive by a Pro 840 Samsung SSD. The laptop does not recognize the SSD drive, so I sent him to the local Toshiba service for inspection.

  They discovered that the laptop does not recognize ALL of the latest SSD (they tried to Samsun, Intel, Crucial, Kingston and SSD Seagate). They checked, and I possible newer BIOS, so this isn't a problem, and the SSD worked fine on other computers.

  Someone knows how to solve this mess?
  Toshiba has a BIOS beta I could try?
  Any other ideas would be welcome.

  As a user of long date Toshiba, I must say that I am a little disappointed. I mean I work in it, and this is the first time that something like this happened to me with a new product.

  Hello

  I can't believe that Satellite M50 - A can not handle any of the mentioned SSDS.

  I upgraded my Toshiba laptop with SSD Pro 840. But before I did, the update of the firmware of SSD was necessary. Before the firmware update, the SSD has failed, after the firmware update, BIOS can handle the SSD.

  I would recommend to check the SSD for the firmware update!

• Satellite M50-A-110: Question on Windows 10 recovery

  IM thinking of upgrading my M50A-110 of win8 to win10, but I have some concerns

  namely, when I did the recovery on my lap top in win8 chose "remove all and reinstall windows" option.

  During this operation, none of the drivers (geforce experience, drivers intel...), nor programs of utilities toshiba (gas station, office assist...), had to be installed manually, but have been installed as part of the recovery.

  I like this feature so I would know what to do to keep it in win10?

  Did you create a recovery (DVD or USB) media?
  If Yes, you can do what you want with your laptop and to experiment with the upgrade and Windows 10.
  By using this media created you can restore your original version of OS that you got with your laptop satellite.

  If you don't have it, but you still have the original version of the OS please create this support and make backup recovery image. After upgrade Win10 you probably won't able to start HARD recovery disk image installation. Be careful about this.

• GPU on Satellite P100-217 fan never turns on running Linux Gentoo

  Hello

  I am running Linux (Gentoo) on my P100-217 (Geforce 7600). The graphic card fan never turns on, and the GPU gets to a temperature higher than 100 ° C when executing some 3d games. When I boot to windows, the graphics fan does not turn and the GPU is much cooler, running the same games.

  Can someone Toshiba please give me some information on how to solve this problem under Linux.

  Here is some additional information:
  Driver version: 1.0.9755
  nvclock version: 0.80.
  Nvclock message: you the fanspeed adjustment only is not supported on your video card type

  Thank you

  Chris

  Hello

  I'm not Toshiba, but maybe I can help you too.

  Type in the console:

  detection sensors

  and follow the instructions. Maybe you need to compile some kernel modules yourself.

• Satellite M50-A-110 - looking at the keyboard backlight upgrade

  I bought my laptop 2 weeks ago and I'm looking to upgrade my keyboard with backlight keyboad.

  The motherboard has the additional connector, but I need to confirm with you: [Motherboard | http://i732.photobucket.com/albums/ww321/maliaros/th_20140527_1532171.jpg]

  Also, I found some vendors on ebay sell the keyboard for half as much as the Distributor and I'd like to know what you reccoment.

  Hello

  > Also, I found some vendors on ebay sell the keyboard for half as much as the Distributor and I'd like to know what you reccoment.

  In many cases the different keyboard would be consistent, since most of them are supported the same hardware specifications.

  With regard to the additional keyboard connector:
  AFAIK the backlight keyboard must be connected to the additional connector called * JBLG *.
  But to be honest, I have not found in on the photo that you placed in the post.

• Satellite M50: Windows did not start because of a corrupted system file

  Hi all.

  I have a problem with my laptop Satellite M50. When you turn on the laptop, a message appears: "Windows did not start because the following file is missing or corrupt: \windows\system32\config\system»

  I am aware of my product recovery CD-Rom and have inserted - however, I don't want to reformat my HARD drive as I have files I back (foolishly) not upward.

  Is there another method to repair the corrupted file without having to wipe all files on the HARD drive? (I don't have an XP CD - the operating system is loaded OEM when the laptop was purchased)

  Thank you very much!

  Hello

  Hmm, using the repair console could be a good way to copy or replace the damaged or missing files on the HARD drive.
  BUT you need to start the console of Windows XP CD of original Startup Repair.
  Without this CD, you will not be able to repair the operating system. The Toshiba Recovery CD contains only image files and does not start the repair console.

  Now the question is; How to back up data.
  You can remove the HARD drive and connect it to the PC second via the external USB HARD disk controller.
  Then you should be able to copy important files on the second computer.
  After backup files you can start the installation from the recovery CD.

  Good luck

• I have a Toshiba Satellite M50, are they able to be upgraded with windows 7, and I can't do the wireless network is displayed?

  I can not connect or see the symbols wireless, and if I connect the ether net cable is fine, but I wanted to use wireless? the switch is on the front is on and area 2 connection contiues to say that there is a cable unplugged? Help, please

  Please can someone post a link on how to configue this laptop wireless... Thanks OH it OF RUNNING WINDOWS XP ATM...

  I can not connect or see the symbols wireless, and if I connect the ether net cable is fine, but I wanted to use wireless? the switch is on the front is on and area 2 connection contiues to say that there is a cable unplugged? Help, please

  Please can someone post a link on how to configue this laptop wireless... Thanks OH it OF RUNNING WINDOWS XP ATM...

  Your old Toshiba Satellite M50 probably cannot be upgraded to Windows 7, but go here: http://support.toshiba-tie.co.jp/windows7/upgrade_cae.htm

  What is Windows XP "ATM"?  Right-click on desktop and select Properties.  What version of WIndows XP, including the service pack is shown here?

  What do you mean by 'symbol wireless "?

  Either the light near the wireless switch on the front of the laptop on or off? It will power on and off when you change the switch setting?

  Open network connections (start > run > ncpa.cpl > OK) and list all the icons that you see there.

• Satellite M50 - 122 insertion of battery running

  A business partner of mine can run his laptop with the battery inserted. But it also can, reinsert back while his laptop is running.

  So I wonder if my Toshiba Satellite M50 122 can do it too?

  Dear Jonny

  I really can't believe you ask something like that. Try to please and let us know if it works with your M50.

  PS Please do not forget to connect the laptop to the power supply. ;)

• Satellite M50 226 hangs after the victory of logon Wlan is turned on

  Hello everyone,

  I had a problem with my satellite m50-226.
  It happens quite often that when I boot up my laptop a card WiFi is turned on, the computer hangs after windows journal.
  When I type my user password nothing happens and a few seconds later, the background appears but nothing else.
  When I restart the laptop the same problem occurs. only when I turn off the wlan card, I can start the computer successfully.

  Maybe anyone can help me?

  thanx.

  welcome them
  Alex

  Hello Alex

  I am very interested about your problem and it is interested to know if this problem persists if the unit wakes from sleep or hibernation mode.
  Can you please verify this?

• How can satellite M50 - what is on the disk recovery - I run

  Hi, people, I have a Satellite M50 and a recovery disk, which is on the recovery disk? Y at - it windows Xp on it? Y at - it all the tools and utilities on it?, can I use it to reformat? How can I run?

  Thanks if you can answer

  On the Toshiba Recovery CD, you will find a picture of Toshiba!
  The image contains a Windows operating system, Toshiba drivers, tools, utilities, and additional programs like WinDVD, for example.
  Using the Toshiba Recovery CD is the easiest way to install the OS on the laptop and set the notebook to factory settings

  As said above the recovery CD will format the whole HARD drive. It would also be possible to erase the partitions! So be careful!

  If you want to install the operating system or run the recovery CD, you put it in the drive and the start of the player. The pressing the C button allows you to start from the CD/DVD drive

• Satellite M50 - wireless card disappeared

  Hey.

  Prolly newb question, but I just can't understand this. I can't find my WIRELESS card, my XP does not recognize it. I think I need some kind of driver for it, but I already tried to install several, including the one on this page. Problem is probably, I don't know what model of wireless card has my satellite.

  I tried google, but the jungle brought me here :)
  Thank you.

  Hello!

  What Satellite M50 laptop are you excactly?
  From Toshiba Web site shows only an Intel driver for Satellite M50 (PSM50E and PSM51E) and to Satellite M50 (PSM53E) a driver Atheros.
  Then choose your model and download the driver.

  An update of the BIOS might also solve the problem, but in your case I would try first upgrading the driver.

  Good bye

• Seeing the drive DVD Satellite M50 does not turn OFF, CD/DVD drive don't read do not

  Hello

  I have a Satellite M50 - mx5 with a carpet * a DVD player. When I insert the CD or DVD, the player starts, turns the CD autour (the indicator light flashes)... but a few seconds later, the drive stops turning, but the DVD drive light is on.

  Windows also think that the DVD drive is empty.
  I also tried to boot Windows from the CD when the computer starts upward, but without success either.

  Ideas for what is wrong? Is my DVD drive broken?

  Thank you
  Eli

  Hello

  Sorry to said but in my opinion, drive is dead and that the replacement allows the reader features can save.

  But be aware that not every drive is supported and can be used with the laptop!
  Take a look in the user manual. Sometimes the compatible players are listed.
  And it s useful to know that all parts can be ordered from the ASP in your country.

  have a nice weekend ;)