Satellite M50: How to make the media buttons on the right works with Vista

Similar Questions

• How to make the printer work with the new Windows 7 laptop?

  can someone me please help... my printer is windows xp and I just got a computer laptop windows 7, how can I make my printer work with my laptop!

  Thank you
  need help with my printer

  Hi gingerbabe001,

  To set up and install your printer, see the link below.

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=setupCategory&cc=us&DLC=en&LC=en&OS=4062&product=1153754&sw_lang

  Good luck.

• How to make a bar of his badge to work with Windows xp

  How to make a bar of his badge to work with Windows xp pc

  Hello

  ·         What happens when you try to use the bar of his badge?

  ·         Did you of recent changes to the computer before this problem?

  Response with above information to better help you.

  Take a look at the link:

  "Suggestions for a question on the help forums.

  http://support.Microsoft.com/kb/555375

• How to use the video port with Vista on Qosmio G30

  Im running windows vista Ultimate edition.
  How to use the monitor in port?

  The Composite (in the port monitor) port is placed to the right.
  With the video component cable software plug-in delivered a CATV or satellite box can be connected to the computer to watch channels.
  You can for example use the Qosmio Player or Windows Media Center to watch other channels.

  As much as I know the ultimate Vista supports Windows Media Center, Windows Media Center HDTV.
  You should read some more details on your new operating system!

• Satellite M50 - how to make scratches disappear from the silver surface

  Hey

  so the other week I bought a Toshiba Satellite M50 and I love her!
  I'm looking to snap the case for weeks because I know myself and I was sure that I would eventually ruin the outer shell, but I can't find anywhere.

  So last night I walk to the top of the stairs and my mother screaming something that makes me jump and I was wearing my phone with the charger on top and to prevent it from falling I really crack down fort and one of the pins on the top of the silver surface striped card.
  I'm so gutted!

  So my question is that no one knows what either which can make the scratch disappear or at least fade?

  I was thinking solvent, but don't want to try anything where it makes it worse.
  know that it's kind of a stupid question, but it's really important to me!
  Thank you!

  P.S. I realized that my key U is really steep... any ideas on how I can get this back to normal?

  In my opinion there is not an effective method that you can use to remove or fade those stripes.
  The surface is damaged and, unfortunately, it will still be visible.

  I also think that you should not use dissolving because of the possible chemicals that can damage the surface even more.

  Is it deep enough or just scratches superficially?

• How to make the bluetooth headset with as default playback device in Windows Media Player

  How to make my bluetooth plantronics backbeat 903 headset to the default listening on windows media player device

  Original title: how my plantronics backbeat 903 bluetooth headset to the device of listening by default on windows media player

  Hello

  What is the operating system that you are using?
  
  Perform the steps:
  a. click Startand then click Control Panel.

  b. in Control Panel, click hardware and sound.

  c. under sound, click manage audio devices.
  
  d. in the sound box, click the read tab, select the Bluetooth device, click on set as defaultand then click OK.

  e. reboot all media programs including Windows Media Player that are running and check.

   
   
  I hope this helps.

• How to make the text box with scrollbar

  I am just learning CSS and Dreamweaver CS4. I have a page that has a lot of text and go on a background image. I need to make one of these text boxes I've seen who can be put in the center of the page and has a slider for people bar can read all the text. I might look for it, but I have no idea what they are called. I tried Googling some names I thought it could be, but they turned out not to do.

  Could someone tell me what they are called and point me to a tutorial on how to make one in Dreamweaver?

  Thank you very much!

  Carole

  Scrolling CSS Division

  {#divName}

  Width: 500px;

  height: 400px; / * adjust the height as required * /.

  overflow: scroll;

  }

  More information about the overflow property

  http://www.w3schools.com/CSS/pr_pos_overflow.asp

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB
  http://ALT-Web.blogspot.com

• How to make the right/left arrows to go at the end of the tabs tab

  This feature has been on my browser. If I double click on the arrow to the right tab, I would go to the last tab on the right. If double clicking on the left arrow tab, I would go to the last tab on the left. It made no difference how many legs were opened. Also, when I flew over the mouse or the other of these arrows, a number appeared how many legs were hidden from view. I don't remember what extensions did, or that it is part of an earlier version of Firefox.

  I'd appreciate any help to solve this problem. Thank you!

  3.6.13 being very little course, if you use it on the wild wild web, have you thought about the upgrade coming to 3.6.28? http://www.Mozilla.org/en-us/Firefox/all-older

  You could test whether the "how many tablets" feature was the result of an add-on by restarting Firefox 3.6 mode without failure of Firefox (Firefox to solve the issues in Safe Mode).

  First of all, I recommend you backup your Firefox settings in case something goes wrong. See back up and restore the information contained in the profiles of Firefox. (You can copy your profile folder Firefox together somewhere outside the Mozilla folder).

  Then, close all Firefox Windows and restart Firefox now press SHIFT. In the Safe Mode dialog box, do not check the boxes, just click "continue mode without failure." If the tab bar controls always indicate the number of hidden tabs, a built-in feature. If this isn't the case, it was an extension. Some people might have been migrated to Firefox 14, but some have never were...

• Satellite A100: How to reinstall the operating system with recovery CD?

  Hi guys,.

  My laptop (8 months) has been crashing (Windows XP) lately and I tried to use the product recovery CD but nothing happened (the laptop failed to boot from the CD, instead, she starts toward the window of connection for Windows XP Home edition). When I open the CD in windows Explorer, then I realized it was empty. Is it supposed to be empty?

  Even if the laptop came with a second CD, "Express Media Player Recovery CD", I think that's going to be for recovering pre-installed software supplied with the system.

  I guess I can contact Toshiba for another free product recovery CD (or are they supposed to be two?) my system is still under warranty.

  Please I need confirmation on this asap.

  Post edited by: [email protected]_UK

  Hello

  It's very strange, I can't believe that the Toshiba Recovery CD is empty!
  There must certainly be a ghost image.
  Very, very strange and mysterious

  The Express Media Player recovery CD retrieves only the Media Express Player but not the entire operating system!
  I also recommend to ask the ASP in your country for a replacement CD recovery.
  Perhaps you could send guys the empty recovery CD because they do not believe! ;)

• How to make the Web Gallery with 3 columns of thumbnails?

  Hi all

  I used the gallery photo web to build a few sites, but always with thumbnails in a single, vertical, column within a framework that scrolls. and I have never mch liked this scroll bar.

  I came across this page:

  http://www.mariannekolb.com/recent.html

  that, as I look at the code, cannot even make use of web photo gallery, but is very similar.

  in any case, someone in this group has an idea how this miniature of multiple column (without scroll bar) is completed?

  Thank you

  the person that I'm building the site hate scrolling.

  In this case, choose a skin different (several to choose) and / or modify the CSS code to meet your needs.  jAlbum forums can help you.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• Satellite P840: How to create the secure boot with UEFI Bios recovery disk

  Hello

  I have laptop P840 that came pre-installed with Windows 8, which I've upgraded to Windows 8 Pro.
  I then updated to Windows Pro 8.1 by Windows store. Please notify:

  1. how to create a DVD repair or start for windows 8.1 pro with UEFI Bios and boot secured.

  2. I created a USB recovery using the control panel in Windows Pro 8.1. It starts OK. It will be the same as that I've created using the Toshiba Media recovery creator or will it drivers Windows Pro 8.1?

  3. check partitions with disk management, then 3 (450MO, 350 MB and GB 10.90) recovery partitions, 1 EFI system partition and 2 primary (C: programs) and D: for data. I created the recovery DVD and USB 2 disks. Can I remove the 3 recovery partitions?

  Your help will be very appreciated.

  Best regards

  Romero

  I found your previous thread on this topic:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=74272

  > 1. How to create a DVD repair or start for windows 8.1 pro with UEFI Bios and boot secured.
  To be able to boot from sources other than the drive HARD internal, the boot mode must be set to the CSM and secure boot must be disabled!

  > 2. I created a USB recovery using the control panel in Windows Pro 8.1. It starts OK. It will be the same as that I've created using the Toshiba Media recovery creator or will it drivers Windows Pro 8.1?

  Your laptop has been preloaded with Win 8. Right? For example, the USB flash stick memory you just use the Toshiba Recovery media creator contains the Image of Toshiba with Windows 8. Don t mix this Toshiba image with the image that can be created using Microsoft's own backup and restore function. Both are different pictures!

  > 3. Check it with disk management, then 3 (450MO, 350 MB and GB 10.90) recovery partitions, 1 EFI system partition and 2 partitions primary (C: programs) and D: for data. I created the recovery DVD and USB 2 disks. Can I remove the 3 recovery partitions?

  The last partition contains the files on HARD drive recovery. Usually this partition will be created again when you use the Toshiba Recovery disk to put the laptop back to factory settings. So in the case where you n t need this files or the partition, you can delete

• How to make the right sidebar (opack) transparent

  Howe can I make transparent right sidebar and still see the clock and calendar as it should

  If your system supports Windows Aero then right click on your desktop and choose personalize.

  : Click color and appearance.

  Click: enable transparency.

  Click here: open the classic appearance for color options properties.

  Click: Windows Aero, OK

• How to make the background image with dramatic style?

  Most of the images I see it is mix of pattern in the background which make it look alive. The model are lines and shiny effects. How do these lines

  oshop http://PSD.tutsplus.com/tutorials/Tutorials-Effects/Creating-a-Mac-type-background-in-phot.

  http://www.Tutorial9.NET/Photoshop/creating-the-Windows-Vista-lighting-effect/

  http://psdlearning.com/2008/06/luminescent-lines/#more-45

  Search for abstract Photoshop etc.

• How to make the macro photography with a DSC-WX220?

  I have a new camera Cybershot. The DSC-WX220 and I am at a loss on how to put it up to take macro photos.

  Am certain someone reading this knows how little it is SONY ref manual, procedures and others.

  It's not like I'm new on camera. I am an 80 year old retired professional photographer.

  Any help is appreciated.

  Hello. Macro mode on the camera is automatic, so there is no particular setting to select. At the larger end, the camera will focus about 2 inches to infinity then until the end of the TV about 5 inches to infinity. This information is taken from the manual in full page 105. Hope that helps.

• Satellite A100: How to use the IrDA port with cell phone?

  I have a laptop with an infrared port that I can use with another computer.
  Now, I have a problem with my laptop at home, A100 series.
  I downloaded Nokia PCsuite software from the Nokia site, but it can not connect to my phone.
  If I put the phone to transmit IR, always the pc does not regognice the phone anyway even if the phone is located near the infrared port of the PC.

  I updated my bios, tried to take the infrared port, used as a port standard com etc. Nothing works.
  What should I do to get the infrared port of the function and write down automatically if I bring about my mobile with IR?

  Thank you
  Petri

  Don't be angry with me because I ask, but are you sure that your laptop supports the IrDA?
  What cell phone do you have exactly? Satellite A100-xxx

  IrDA option appears in the control panel?