Satellite M70 148 Java3D - ATI graphic display problem

Similar Questions

• Satellite M70-144: Linux monitor/graphics card problem

  As the topic says I had problem with the starting x server on my linux partition on my laptop.
  I tried several different distributions, but nobody seems to be better.

  I got Fedora Core 6 on it now and I at least get the Terminal so I can edit the Xorg.conf file and I download the latest drivers for my graphics a x 700 Radeon card. But nothing seems to be an improvement of the black screen when you try to start X.

  Anyone else have the same problem and fixed or know any good HOWTO?

  I don't have a M70. But a good tip is to get Knoppix. Knoppix is a bootable CD so you can run linux without installing anything. I had a few times where I couldn't have some hardware to work, but could Knoppix. Looking at what Knoppix used drivers, I could get it working in installation of Linux.

  You can get Knoppix here: http://www.knopper.net/knoppix-mirrors/index-en.html burn it to a CD and boot from it.

  If your software does not allow to write ISO files, then get http://infrarecorder.sourceforge.net/

• Satellite M70-148 - ATI driver blocks everything in windows starts

  Hello

  Strange thing, when I start windows xp, the windows on the slider blocks

  I have a Mobility Radeon x 700 graphics card in the Satellite M70-148.
  I have seen that it is the graphics driver that gives the problem

  I have restore dvd toshiba with the same problem.
  I was on the site to download the latest driver maybe again the same problem

  I went to AMD for another driver, again the same problem.
  The only rider agreed to work is the driver of windows, but the quality is not top (max resolution 1024-768)

  In safe mode no locking

  I also upgraded the Bios without result (and I don "t want to replace the motherboard)

  An idea for the other driver for better work

  Thanks for any help

  Hi mate

  It is difficult to say what issue it could be
  You said that the graphics card a few worries and the laptop does not event after using the Toshiba recovery.

  That s weird. This means that there is something wrong with the hardware in your case perhaps the problem of graphics chip :(

  But without a hardware test it is really not easy to say what part has been affected.
  I think you should contact the technician ASP pourrait test the laptop, check the motherboard and might be able to provide more details
  Then you could decide what to do

  Welcome them

• Re: Satellite M70-148 - new compatible DVD player

  I have a Satellite M70-148 and the DVD writer is dead some time ago, I'm looking to replace it now but I'm stuck. After looking a bit on Amazon, I found these:
  http://www.Amazon.de/GP/product/B0052JJ44C/ref=ox_sc_act_title_3?ie=UTF8&m=AX7W93QYFVSA2
  http://www.Amazon.de/GP/product/B0052JJ2P8/ref=ox_sc_act_title_4?ie=UTF8&m=AX7W93QYFVSA2

  Is the 2 only I could find on Amazon, I asked the seller as well, but I prefer to know for sure, anyone know if either will fit in a M70 148? All this looks like but what about the connector etc...

  Thanks for any help!

  Hey,.

  What vendor you asked?
  If it were an authorized service provider, you can be sure that the readers, they mentioned will not work properly and I would like to buy only one disk recommended by a service provider authorized because different readers have different pinouts, etc. to 100%, so not all readers are compatible.

  I can t tell if Amazon readers are compatible or not, but if you ask an authorized service provider can give you an exact answer ;)

• Satellite M70-148: Question about Windows keys

  I have a M70-148. According to the sepcs, there should be 2 keys of windows, I have one at the top right of the keyboard, where is the other?
  right next to the space bar, there is an empty key, how can I configure it to be a key victory?

  Hello

  I checked the manual of the user of the Satellite M70-148 and according to this manual, the keyboard offers 2 windows special keys that have a special function in Windows XP. To activate the menu start and the other has the same function as the secondary mouse button. (Please see Chapter 5 of the manual)
  These keys you will find in the upper right of the American keyboard.

• Graphics/display problem - Satellite M60-105

  I'm having a little problem with the display (or graphics). In some programs of CAD (Inventor, Solid Works) 3D solids are displayed with lines that normally are not displayed. "I see the solid. In the games like Doom3, I see only a chequer (Exchequer) with black, the blind, the tasks of rectangle. I tried to update the graphics driver, but the results were the same. Problem is more complex that I have thaught, because I noticed the same problem after formatting HD and mounting of Toshiba Recovery CD. Also, I noticed the same thing happens when I'm trying to change something in the BIOS. Maby some of you have had a problem like this, please help.

  Hello

  Believe me on this path is not easy to say what may be the problem. The explanation of your problem is good, but it will be interesting to see what you mean exactly.

  One of my friends has M60 and I didn't see any display problem on his unit. If the unit is installed with recovery media that produced with other applications, watch DVDs or simply with 3D CAD program?

  It will also be interesting to know what you exactly changed in the BIOS.

• Satellite L850 - cannot play Minecraft - graphics driver problem

  Hello

  I have a Satellite L850 with this specs: Intel Core i7 3630QM with an AMD Radeon HD7670M and 8 64-bit windows.
  I installed the latest drivers display amd by toshiba Web site and java 64 bit.

  Walker I launch Minecraft is as usual, but when I click on connection a black screen stands for awhile, then the failure Message screen comes and it means something like this:

  Bad video card drivers!

  Minecraft could not start because it did not find an accelerated OpenGL mode.

  Generally, this can be corrected by updating the video card drivers.

  So I hope that you are able to help me.
  I've already spent many hours to fix it, but nothing works
  :(

  In this game forum, you can find several discussions on the problems in playing Classic.
  All cases have been resolved by the update of the graphics card driver.

  To my knowledge, the driver of Toshiba page does not contain the OpenGL but DirectX (of Microsoft)

  Then maybe you will need to install the driver of an another 3rd party sources
  Your laptop supports the AMD (ATI) graphics chip?
  Well, in this case, you could test a driver of omegadrivers.net but the use of this driver is your own risk, don't know if it will work stable

• Satellite Pro A60: On startup graphics card problem

  Just got a Satellite Pro A60.
  Whenever it starts it stops and then restarts. It then works perfectly OK, even if restart you. But then if you start it once it is shut down for a few hours it crashes at startup upward again?
  Windows error report accusing the graphics driver ATI Radeon 7000 (see report below), but I've updated the graphics driver and still get the same problem.
  CAN ANYONE HELP?

  This is the error report:
  Error caused by ATI Graphics Driver: no specific solution found
  Description of the problem
  An unknown error has occurred in ATI Graphics Driver, created by ATI® Technologies, Inc.
  Resolution of problems
  ATI® Technologies, Inc. is currently not aware of a specific solution for the problem you reported. Here is a list of recommendations to take that may help prevent the problem does not happen.
  Download and install an ATI Graphics Driver Update from one of the following locations:
  o Windows Update
  o ATI® Technologies, Inc..
  If an updated driver is not available, check with your computer manufacturer.
  If you are running the latest version of the ATI graphic driver, please contact ATI Technologies, Inc.® for your support options.

  More information
  If this problem persists with the latest updates to ATI Graphics Driver, we strongly recommend that you obtain assistance and troubleshooting directly from ATI® Technologies, Inc. information.
  If you are not familiar with ATI Graphics Driver and you are questioning how the program was installed on your computer, it is possible that the program was installed with another program. If you don't know why ATI Graphics Driver is running, many programs configure themselves automatically starts whenever you turn on your computer.

  Hi Barry,.

  I'd be inclined to return your laptop to an authorized Service Agent Toshiba. The OEM software should not require all the updated drivers at this early stage of his life, and the unit will be well within its warranty period.

  The closer your repairman details can be found on the Toshiba site.

  HTH

• Tecra A9 XP-Pro/Graphics display problem - 11 M

  You just bought a Tecra A9 - 11 M running XP Pro. I can't go to Vista I use various industrial software packages that are not yet compatible. I have the following problems with graphic display:

  1. a lot of Web sites are not displayed correctly. Colored backgrounds etc often lack altiogether.
  2. when I compose an email in Outlook Express, the color of the text remains black no matter what color choose.
  3. when I type messages in Windows Live Messenger, the text appears in the color I chose that I type in, but then goes black after clicking the Enter key.
  4. when I use the graph editor in one of my industrial packages (Siemens Win - CC), if I try to change the color of an element to display the color palette appears empty as if it cannot display the colors.

  Paint and Wordpad, both work correctly in terms of colors.

  I use the default screen (1680 x 1050) and 32-bit color resolution. I tried different combinations of lower resolution and also change to 16-bit color, all to nothing will do. I tried to update the downloads of Toshiba display driver, but he sent the message that my pc does not have the minimum requirements for installation. Yet, everything works perfectly and there are tons of disk space and free ram. I also checked that mmy BIOS is the latest version. I am pleased with the machine in general, but at my wits end to know what to try next.

  > I tried to update the downloads of Toshiba display driver, but he sent the message that my pc does not have the minimum requirements for installation.

  Are you sure you used the right graphics driver?
  Have you used the download Toshiba pilot European page graphic driver FRO?

  It seems it s an Intel graphics card and you must use an Intel graphics driver.

  One question; the screen works properly without any installation of 3rd party applications?

  If Yes, then it s a software problem caused by 3rd party programs.
  The software is perhaps not fully compatible with the GPU from Intel or Intel shared graphics is not strong enough to manage the graphic editior

• Satellite M70-148 - power on problem after hibernation

  Hello:
  Sometimes, I have a problem I can not turn on after hibernation. The fan starts, but the computer does not start again. I can only turn off again by pressing the button for a few seconds. When I remove my power cord and press the power button, I am able to start up. I can solve this?

  I've been on the internet looking for a solution and found this description of the problem, which is exactly what I have, but unfortunately there is no solution.

  "
  I'll explain the problem in detail, right after hibernation or standby IF you press power button / stop it goes blue led fan starts, HD led lights, led battery, power adapter led (if its connected) and a cd player make it sound as if he looking for a CD, and THEN stopped fan HD led turns off, no sound from CD, leaves u with button only works / stop led on, a pretty frustrating blue

  After waiting, u eventually gave up, turn it off by prolonged pressure on the button / stop and then no matter wut u do, simply starts only even the sounds and the leds as mentioned above, nothing on the screen as if its dead! No logo, no nothing.

  Give him a time (about 15 min with battery connected, or 5 minutes or less with the battery) press the button, IT U - GO, works perfectly!

  same case with the judgment but not always as put into hibernation and sleep (but once made wake-up from standby mode!), but most of the time after the judgment, you have to wait 15 min!

  No memory connected USB flash or something else!

  I have installed winXP pro SP2 above and installed the drivers and the Microsoft HOT fixes too, but the problem remains.

  I also made recovery from the CD of restoration which follows, also not good!

  I noticed that if you disconnected the battery the appliance needs less time to wake or boot. about 5 min.

  what kills me, is that the device works perfectly and I love it! I've had this problem with her!

  So what I need to know is the following: is there anyway to weather course if it's a hardware or software problem?

  its not easy to go to service local cuz its in another city! I need to try first what it takes to fix it on my own!
  "

  Thank you for your time!

  Well, there's not much to do. You have some many possibilities. Check your installed BIOS version and compare it with the version on the Toshiba site.
  If there is a newer version so you can try to update the BIOS. But please be careful.

• Satellite Pro L100 PSLA4: ATI graphics card crashing in half-life 2, Team Fortress 2

  Hello

  I have a satellite Pro L100 (PSLA4) with ATI Radeon Xpress 200 M graphics card.

  During the game Team Fortress 2 and Half Life 2 Episode 2, the system breaks down frequently (screen goes black, then blue, then the computer automatically resets). After restart, Microsoft error reporting tells me that there is a problem with the card ATI display driver and recommend updating the driver.

  I note that Toshiba has not released a new driver to display this map since 2005, and attempts to update via the ATI Web site do not work.
  Is it possible to update the graphics driver or Toshiba has plans to release an update.
  Thank you

  Ian

  Hello

  I use the driver of the * www.omegadrivers.net * site.
  It works on my laptop.

  Download the right and compatible on then go to Device Manager and select the graphics card-> update

  Then select Install from a list or a specific location-> don't search. I will choose the driver to install.

  All that s!

• Satellite L50 - A-1 DG - brightness display problem

  Hello

  I'm a french sorry for my English.
  My problem with my pc is my brightness,

  I can't change it,
  If I try with fn key change and change with the config panel nothing too :/
  My gpu driver is up-to-date (intel graphics hd 4600)

  Thanks for your reply.

  Hello

  What system is preinstalled on your Satellite L50 - A series?
  Have you changed anything in the configuration of the system?

  The display brightness is controlled by the function keys Fn + F2 / Fn + F3
  Toshiba Software in addition special (depending on the system you use) must be installed!

• Re: Satellite S70 - B - bad ATI graphics card

  Hello

  I have a Toshiba Satellite S70 - B with an AMD Radeon R9 M265X.
  I installed all the updates but it's now called "AMD Radeon HD 8800 M Series", it is exactly this problem:
  http://APS2.toshiba-tro.de/KB0/TSB4903N60000R01.htm

  But the solution is to update the divers, that's already what I did... so what can I do?
  I tried to uninstall, reboot, reinstall the different versions and so on... I'm totally lost now :'(

  And now I do not see the option appears when you left-click on the desktop to access the interface of catalyst or select the graphics card to use according to the programme (to use the radeon in the game and not the intel HD).

  An idea to make everything back to normal?

  I m not very well if the solution might be the same, because your laptop is different.
  It s S70 - B Satellite

  By the way: what Satellite S70-B-xxx you exactly and what version of driver AMD have you installed.

  The Toshiba UE driver page provides different versions of the AMD drivers!

  However, I recommend you to repeat the solution posted in Toshiba document.
  First uninstall the driver from Device Manager graphics card.
  Download the latest version (according to the system of windows), and then install again.

  Here is the list of the available GPU drivers:
  [AMD GPU drivers: http://www.toshiba.eu/innovation/download_drivers_bios.jsp?action=search&selCategor y = 2 & selFamily = 2 & selSeries = 365 & selProduct = 17894 & salt ShortMod = null & selType = 11]

• Satellite C660 - update Intel HD graphics card problem

  Hello

  Sorry for my level of English, I'm French

  I have a problem without a solution with my Satellite C660 (for the moment, I hope!) I downloaded the software google sketchup 8, dedicated to the development of architecture, but it does not work, I still got a bug message advising that it is necessary to update the graphics card drivers (according to google support it seems that OPENGL functions must be implemented in the drivers of my laptop)

  So I downloaded the latest drivers available for the configuration I have (Intel HD graphics for pentium, 64-bit windows 7).

  the link (french site, that Intel is not currently available, it is a document of .exe)

  http://www.Touslesdrivers.com/php/Constructeurs/TELECHARGEMENT.php?v_code=37057&v_langue=FR

  I tried to update manually driver graphics card with Device Manager menu (graphics card > update drivers button > file.exe manual selection), but in the end, there is no update, I did that a very small message advising that windows has determined that the pilots are already updated.

  In fact there is no change on the drivers (always the same date of the 2010-07-28 drivers in the properties of the graphics card) and sketchup is still unemployed

  Any suggestions?

  Thanks in advance

  Hello

  What C660-xxx you have exactly?

  If you have an Intel graphics card, you must download the driver directly on the Intel site.
  There you should find the last version of driver

• Satellite M70-131: video files are displayed in black

  Dear friend

  I have a problem on my labtop with a graphics card.
  When I display all the video files the graphics card is very bad display this file, I see (video file) black (not clear).
  How can I solve this problem?

  Please help me

  Hello

  This problem occurs only with video files?
  If Yes, then I guess we're all ok with the graphics card and drivers, but you need their pettiness.
  In my opinion, you need to install codecs.

  Check this announcement:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=12068&MessageID=44047