Satellite M70 - how to assign administrative rights for the user account under Win XP

Similar Questions

• How to give administrative rights for the domain users (user is outside organization).

  Hello

  How to give administrative rights for the domain users (user is outside organization).

  If the employee works in the company of xxxx but it supports the client project and is located on the place of the customer, but it does not use the client computer and not on the client domain as well, but the employee is in the company of xxxx must be given administrative rights to the computer. can someone help me on this ASAP.

  Thank you

  MURUGESAN Rudy,

  This issue is beyond the scope of this site and to make sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• How to create a password for the user account for my child?

  How to create a password for the user account for my child?

  You can create the user with the parental control account. This will act as a protection for the child's account.

  You can take a look at the following links on setting up parental controls:

  http://Windows.Microsoft.com/en-us/Windows/set-up-family-safety#set-up-family-safety=Windows-7

  http://Windows.Microsoft.com/en-us/Windows/set-parental-controls#1TC=Windows-7

  http://www.howtogeek.com/HOWTO/10524/how-to-use-parental-controls-in-Windows-7/

• How can I get the administrator rights on my user account?

  OT: Without administrator rights.

  I don't have my active administrator account.

  I had a user account that I removed myself from the group administrator.

  Now I'm locked to do anything.

  I can't assign me to the admin group, I can't allow the user to administrator, I can't edit some files or delete some software...

  I tried cmd but get access denied when you try to activate the administrator account. It does not help if I open CMD or anything else with administrator privileges.

  I can't open the recovery mode, tried to start in safe mode and all the rest.

  How can I get the administrator rights on my user account?

  I had a user account, which I removed myself from the group administrator.

  -> This is called "paint yourself in a corner.

  I tried cmd but get access denied when you try to activate the administrator account. It does not help if I open CMD or anything else with administrator privileges.

  -> Is normal. Either you are an administrator, or you're not.

  How can I get the administrator rights on my user account?

  -> Ask a friend to burn a CD repair system for you (Control Panel / backup and restore). Now to use this CD to start the machine in Repair Mode, and then use the system restore to set Windows to a point before you downgrade your one and only the admin account.

  When you're done, plan ahead a little and create, test and document a spare, even admin account that you have a spare House key. This will save you a lot of trouble.

• How to create a password for my user account?

  Original title: password at startup of Windows 7 Home Premium

  Is there a way to create a password to start my computer?  I have Windows 7 Home Premium.  I have not done this when I first bought my computer and I would like to have because my now my 7 YO son is to get up very early and get the computer without our permission.

  If this is done, you have any other suggestions other that disconnect all computers in our House and hide the?

  Thank you.

  You can set a password for your administrator accounts, you can set a password for your own user account to the daily & you can also a password for the user account of your son.  The link shows how you and advises you to create two administrator accounts to ensure you don't get never accidentally locked on the PC.

  See precautionary measures 1 - create two additional administrator accounts

• Same resource get assigned several times for the same account user IDM

  Hello
  I now see a strange scenario in IDM. We have a DB TAG and a scheduled task. When I ran the scheduled task, then it assigns the purpose of resource GTC to the respective accounts in IDM. When I run again the GTC, the same object resource GTC is created once more for the user account. Means, now the user account has two resources GTC in the profile of its resources. It should have been only object resource GTC and update should have been linked to this GTC RO. Purpose in my about his creation of another object of the resource.
  Now, I ran five times GTC and my user now has 5 resource. Please let me Kow what harm I do.
  
  
  Thank you
  Kalpana.

  Make sure that this key field is mapped correctly in your recon field mappings. Also, check the areas of the reconciliation of the resource of the GTC.

• Download firefox 10, Setup asked for the user account, enter the type of w/admin myPC, firefox exit installtion (Toshiba A665/I7/windoe 7)

  My computer is Toshiba A665 w/Intel core I7 and Windows 7 installed. When I run the installer of firefox 10, he asked for the user account ID and password. I entered the name of the computer that is mine with admin enter the account and a correct password. Installation of Firefox to quit smoking. No screen / another reply?

  Hello

  Please try a right click on the downloaded file and select run as administrator.

• Satellite M70 - 147 - which driver I need for the wireless card?

  Hi all

  I installed Windows 7 on my Satellite M70-147. Everything works fine, except the WLAN.
  Does anyone know that drivers to use (perhaps a universal) to make this work?

  I don't know what card is in my notebook, I tried the drivers of toshiba for adapters intel, realtek, and ahteros.

  Your help would be much appreciated!

  Hey Buddy,

  First you must make sure what WLAN card you have. Therefore, you can check the device ID and device for the provider Manager. Enter these codes on this Web site: http://www.pcidatabase.com/

  You will see you have the WLAN card. After that, you can try to install the correct driver for your card.

  Good luck! :)

• How can I change the administrator account for the user account?

  Our son has taken control of this computer! How can I to the administrator for the standard user account? Help, please!

  Go into the control panel.  Choose the user accounts and family safety.  Then, go to the user account, manage accounts and change the account type.  Here's where you can change your son of the administrator user account.  Hope you can get it fact.

• Run as pop up appears for the user account to connect to the computer

  Original title: security

  "When I turn on my computer, a smaller screen appears on the display of windows 'Run as' breast and ask which user account you want to use to run this computer", it then lists current user with a number that is similar to mine as an administrator with a checkbox. "or below cela" the following user ' to add details. I'm afraid that someone is trying to take over my computer. I have run Norton anti virus. How to stop what appears and get rid of it. This is a major threat. Paul

  Hi Paul,

  1. what anti-virus software do you use?

  2 you use the password while logging on to the user account?

  I suggest you of change the logon window and the shutdown preferences in Windows XP to resolve the problem.

  Setup configures Windows XP to use the friendly welcome logon screen and close buttons, if your computer is installed as a computer (a computer where a network domain has not been specified).

  This article describes how you can enable the classic logon screen used by Windows XP Server that resembles the following example:

  Log on to Windows

  User name: _______
  Password: __________

  To temporarily use the classic logon screen, press Ctrl + Alt + Delete twice on the Welcome logon screen.

  To configure Windows XP to use the classic logon and shutdown for each logon screens, follow these steps:

  a. click Startand then click Control Panel.
  b. double-click user accounts.
  c. click on change the way users log on or off the power.
  d. Click to uncheck the use the Welcome screen check box.

  Note: If you disable the Welcome logon screen, you also disable the fast user switching option.

  If you want users to press CTRL + ALT + DEL before the classic logon appears like a Windows XP-based computer that is joined to a domain, follow these steps:

  a. click Start, click run, type regedit in the Open box and then click OK.
  b. click the Winlogon subkey at the following registry location:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon
  c. click change, click newand then click DWORD value.
  d. to change the name of the value, type DisableCADand press ENTER.
  e. keep the data value set to 0. The set of data values appear as 0x00000000 (0).

  Warning: Ask users to press CTRL + ALT + DEL before the classic logon screen appears.

  If you don't want that, then come back in a classic.

  Note: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  For reference, click on the link below:

  http://www.Microsoft.com/security/PC-security/protect-PC.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps.

• 'Learning' help pages for the user account is empty

  Hello

  I am facing problem when I try to open the user account or types of user accounts or layout help user under 'Discover' page in the user account. White always open the page. I use Windows XP Embedded and got my picture made through Target designer. I had installed the 'Help Center' and Service component and "help and support" but still the problem persists. I can run helpctr.exe without any problem and more on the 'help and support' service is running normally. Future prospects for any solution on this.

  Nitin

  Hi nsrivast,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  This problem may occur if one or more of the Jscript registry key settings are incorrect. This problem can also occur if the Jscript.dll file is missing or damaged.

  (a) click Startand then click run.

  (b) in the Open box, type regsvr32 jscript.dll , and then click OK.

  (c) click OK

  Several dialog boxes are empty

  http://support.Microsoft.com/kb/831430

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Need administrator rights for the Intel on Satellite Pro 2100 speed step

  Hello
  I have a Satellite PRO 2100 (Pentium 4 1.9 GHz).
  I have a problem with the function of the Intel speed step, which reduces the speed of the processor at 1.2 GHz. But I have a problem: I can do this, if I use an administrator account...
  After starting, if I connect with a simple user account, the Intel speed step works... and the speed of the cpu remains at 1.9 GHz.
  So I would like to use this function with a simple user account, how do I do it please?

  Thanks for your help :)

  Hello

  As far as I know that this application is not shipped with the image of Toshiba and it s not made not part of the image.
  But I put t see any big problems. You will need to change your account administrator rights. In this case, you will need to ask someone the admin right to edit your account.

  The other possibility is to change the law for this software. There can be changes as by admin. What you can change in the Security tab in the program properties. Full control must be set to all.

  Then, it should be possible to use this application with your account.

• Remove or disable the protection password for the user account

  I have two accounts on my computer to my name. One is an administrator account. The other is a local account. I use the local one for all my general purpose computer. The administrator of one I use only to make changes. I created a password for what I believed to be the administrator account. Actually, I created a password for my local account. Now, I have to sign before I can use the computer. I can't find a way to remove or disable the password without deleting my local account. If I delete the account I'll lose everything in the account. We know how if it is possible to delete or disable a password protected account password?

  Hello

  Control Panel - Power Options - "require a password on wakeup" - value "need not."
  -Save the changes.

  Desktop computer (Windows key + D) - right click on an empty area - customize - lower right Screen Saver.
  Uncheck the box - the resume, login screen - APPLY - OK.

  ----------------------------------------------------------------------------------------------------

  How to make so that Windows 8 connect you to a user automatically at startup account
  http://www.eightforums.com/tutorials/2894-log-user-account-automatically-Windows-8-startup.html

  See #5

  Or use this method:

  How to turn on or off course connect by using Ctrl + Alt + Del in Windows 8
  http://www.eightforums.com/tutorials/5761-secure-sign-CTRL-ALT-DELETE-enable-disable-Windows-8-a.html

  Others:

  How to automatically log on to Windows 8 [direct access]
  http://www.AddictiveTips.com/Windows-Tips/how-to-automatically-login-to-Windows-8-direct-logon/

  Windows 8, how to connect automatically
  http://www.gHacks.NET/2011/09/16/Windows-8-How-to-automatically-log-on/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• No privileges for the user account

  Hey there,

  I have a strange problem and I'm not finding useful answers...

  I installed Windows 7 Pro on a box that is used as a file server, database server and the virtual machine host.

  Homegroup is disabled and password sharing is turned on. While I am trying to solve the problems, the firewall is disabled.

  To manage permissions on the various actions, I created a few accounts: media, phone, remote_admin.

  All three accounts have been removed from the 'Users' group so that they are not displayed on the logon page, and I used netplwiz to set my default account to connect automatically. Phone users and the media behave as expected, they have access to their respective shares, and the permissions are applied correctly. The problem happens with the user remote_admin.

  The user is a member of the Administrators group, interactive logon is disabled, so it can be used only for the administration of the network. Even if the account is a member of the Administrators group, I can't be able to access network shares. I can connect to the network and list of the actions available on the box, but each of them is denied access. I created a sharing with access explicitly for the Administrators group and made sure the permissions of file system corresponding, but I am still unable to access any of the actions. I tried the same thing with explicit access to the account and got the same results.

  Thinking it was a problem with the specific account, I deleted and recreated. Even without any modification of the authorisation, the account cannot access the network shares. After you re-create the account does not appear in managing accounts through Control Panel, but I'm able to see it in the accounts of users through computer management. In its default state, the account is allowed for a direct connection and can access the files on the disk, but cannot access the actions; during or remotely connected to the box.

  Any thoughts?

  * EDIT: I can not mark my own reply as an answer

  All permissions to the shares are refused to the Administrators group by the UAC. Deny it does not take precedence over those that are permitted explicitly to the user or another group, there are a number of solutions:

  (a) allow access to the user explicitly.

  (b) add the users to another group (not integrated) and allow access to it.

  (c) turn off UAC.

  (d) modify the registry to disable the restrictions placed on the Administrators group:

  HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\.

  Create or change the key called LocalAccountTokenFilterPolicy (DWORD32) and set its value to 1.

  C and D above cause of the Administrators group to behave as it did in Windows XP. Access to shares default is restored (C$, D$ etc.). This also affects a number of other restrictions which have been implemented by the UAC as the driver installation and access to system folders.

  The main difference between options C and D is C will remove all restrictions of UAC to the machine, while D will only remove the restrictions applied to network access.

  More information can be found at (KB951016) Description of the control of user accounts and restrictions on distance in Windows Vista

  Finally found the answer.

  All permissions to the shares are refused to the Administrators group by the UAC. Deny it does not take precedence over those that are permitted explicitly to the user or another group, there are a number of solutions:

  (a) allow access to the user explicitly.

  (b) add the users to another group (not integrated) and allow access to it.

  (c) turn off UAC.

  (d) modify the registry to disable the restrictions placed on the Administrators group:

  HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\.

  Create or change the key called LocalAccountTokenFilterPolicy (DWORD32) and set its value to 1.

  C and D above cause of the Administrators group to behave as it did in Windows XP. Access to shares default is restored (C$, D$ etc.). This also affects a number of other restrictions which have been implemented by the UAC as the driver installation and access to system folders.

  The main difference between options C and D is C will remove all restrictions of UAC to the machine, while D will only remove the restrictions applied to network access.

  More information can be found at (KB951016) Description of the control of user accounts and restrictions on distance in Windows Vista

• Re: Sat Pro P300 - setting for the user account problems

  Hi guys, the fact that someone knows what this means when the main user (who is the administrator of the computer) will not connect?
  It comes up with an error: the user profile service is unable to open. Profile of user cannot open.
  I can connect with all users on the computer, just not the main user. And this is the account that everything is connected too.
  So I need help! Please, I beg you.
  Thank you

  Hello

  This seems to be a known issue from Microsoft with Windows systems.

  I found this fix MS:
  + Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. User profile cannot be loaded.
  http://support.Microsoft.com/kb/947215

  Run the * Microsoft Fix it 50446 * mentioned in the knowledge base article should help.