Satellite P100-103: upgrade of the Core 2 Duo processor?

Similar Questions

• Satellite P100-286 - upgrade to 4 GB of RAM but BIOS only reports 3 GB of RAM

  Hello, I would like to know if someone can help me...!

  I have a portable P100-286 Toshiba with the following specifications:

  Processor Intel Core 2 Duo processor T7200 - 2 x 2 GHz processor
  2 GB RAM (2 x 1048)
  NVIDIAÃ? GeForce Go 7900 (memory: 512 MB)
  Vista Home Premium 32-bit

  Full specifications here:
  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/SUPPORTSECTION/discontinuedProductPage.do?service=UK&DISC_MODEL=0 & highlightOption = 63188 & com decided .new = Yes .broadvision & PRODUCT_ID = 125204 #0

  According to this specification, the laptop can handle up to 4 GB of RAM:

  "Memory system: standard: 2 048 (1, 024 + 1, 024) MB, maximum of extension: 4 096 Mo, technology: DDR2 (533 MHz) RAM.

  I just upgraded using 2 x Corsair 2 GB of RAM Sodimm DDR2 667 MHz/PC2-5300. I understand that Vista 32 bit may not report all 4 GB of RAM (it is not, only 3 GB reports), but I understand that Vista Service Pack 1 can solve the problem.

  However... confusedly BIOS ALSO notes that 3 GB of RAM. Does anyone know why the BIOS is not seen all the 4 GB? I tried to read about it online, and some advocate a BIOS update. However, many people also say it would be extremely risky.

  Can someone give me some ideas as to what I can do to the BIOS then it recognizes all the 4 GB of RAM?

  Thank you very much!

  Post edited by: [email protected]_UK

  > I just upgraded using 2 x Corsair 2 GB of RAM Sodimm DDR2 667 MHz/PC2-5300. I understand that Vista 32 bit may not report all 4 GB of RAM (it is not, only 3 GB reports), but I understand that Vista Service Pack 1 can solve the problem

  You're not 100% good. The 32-bit Windows OS cannot use the entire 4 GB due to the limitation of the 32-bit operating system. After the installation of Vista SP1 will display full 4GB but it will still use only 3 GB.
  To use all of the 4 GB, different components like CPU, BIOS, OS and chipset must support this. If one of these doesn't support 4GB while the laptop components will use only 3 GB.

  > However... confusedly BIOS ALSO notes that 3 GB of RAM. Does anyone know why the BIOS is not seen all the 4 GB? I tried to read about it online, and some advocate a BIOS update. However, many people also say it would be extremely risky.
  Update the BIOS

  People are right. The update of the BIOS must help to recognize the 4 GB in the BIOS.
  But it s also good that the update of the BIOS is risky.
  If you want to use a bad BIOS or bad procedure to update the BIOS that can damage the ROM. module

  Good bye

• upgrade processor 2.0 ghz core 2 duo processor t5800 dv3500ea

  I would like to know what kind of processors I can upgrade my current computer.

  I have a HP dv3500ea with processor current intel 2.0 ghz core 2 duo processor t5800, I want something 2.6 ghz... is it possible? Thank you

  Hello

  I enclose a link that provides the processors supported for your laptop:

  http://h10032.www1.HP.com/CTG/manual/c01846031.PDF

  If you have at least the version of the BIOS installed F.10E which is the only BIOS where I saw release notes pertaining to processors, you should be able to upgrade to one of these listed processors.

  Paul

• Is it possible to upgrade an Intel Core 2 Duo to an Intel Core i7

  Hello, I have an iMac to end 2009 with an Intel Core 2 Duo processor. Is it possible to move to a processor Intel Core i7 here are my tech features.

  Presentation of the material:

  Presentation of the material:

  Model name: iMac

  Model ID: iMac10, 1

  Processor name: Intel Core 2 Duo

  Processor speed: 3.06 GHz

  Number of processors: 1

  Total number of cores: 2

  L2 Cache: 3 MB

  Memory: 16 GB

  Bus speed: 1.07 GHz

  Boot ROM version: IM101.00CC.B00

  Version of the SCM (System): 1.52f9

  Serial number (System): W8 * 5PC

  Material UUID: *.

  Presentation of the material:

  
  

  
  

  < personal information under the direction of the host >

  .

• COMPAQ 610: Can I install my COMPAQ 610 CPU cycles the Core 2 Duo T7800?

  Can I install my COMPAQ 610 CPU cycles the Core 2 Duo T7800? Now, I have a Core 2 Duo T5870. Taken, they have the same Socket 479.

  Ren_Gen wrote:

  Can I install my COMPAQ 610 CPU cycles the Core 2 Duo T7800? Now, I have a Core 2 Duo T5870. Taken, they have the same Socket 479.

  First of all, we need to know the number of part of system, others allow to check with the service manual if he can take the higher processor or verify what socket it takes.

• A6400.gr: Can my handle old Icehouse a new processor like the core 2 duo E7500?

  Can my handle old Icehouse a new processor like the core 2 duo E7500? Cuz im going to buy a used one on Ebay and it didn't have a cooler! The core 2 duo has more Tcase allowed time up to 74 ° C to 73 ° C to my current pentium dual core E2160 and both have the same TDP of 65 w. do you think I should change the radiator?

  Hello @Mario28,

  I read your post about how you are curious about a heatsink and fan for a new CPU update on your computer, and I'd be happy to help you in this case!

  Because both processors are so close in the temperature and the heat output, the heatsink even you were using previously should still actually cool the new processor, so it is mounted correctly.

  I hope this helps!

  Best regards

• Update Intel® Core™ 2 Duo processor E6300.

  I have Intel® Core™ 2 Duo processor E6300 (1.86 GHz, front side bus at 1066 MHz, 2 MB Cache).
  His quiet old, so my questions are:

  1. the question of whether I should upgrade my processor or buy a new one (or another desktop computer / laptop)?
  2 and if there is a possibility of an upgrade, then can evolve this processor to the 2nd genration i3/5/7?
  3. I like to play games, and I have only 256 MB Nvidia graphics card. Can I level too? If so, then how?
  
  Thanks in advance!
  
  My office details: Compaq Presario SR1932 IT
  (Adding 2.5 GB RAM)

  rish_raj2 wrote:
  

  I have Intel® Core™ 2 Duo processor E6300 (1.86 GHz, front side bus at 1066 MHz, 2 MB Cache).
  His quiet old, so my questions are:

  1. the question of whether I should upgrade my processor or buy a new one (or another desktop computer / laptop)?  My rule of thumb is do not upgrade the processor unless the speed is almost doubled.  I don't think that the performance will be enough to justify the increased cost.

  2 and if there is a possibility of an upgrade, then can evolve this processor to the 2nd genration i3/5/7? This is supported by HP CPU upgrades: see below.

  3. I like to play games, and I have only 256 MB Nvidia graphics card. Can I level too? If so, then how?  The first thing to determine is the power of the power supply unit (PSU).  I think that it can be only 250W.  You can open the case and read the label on.  Latest maps of intermediate level require at least 400W.  So, if my guess is correct, you will need to upgrade the PSU also.  I like the graphics cards XFX, BFG, EVGA, Sapphire and PNY in that order.  I love OCZ and Corsair PSU.

  With this information, you can determine if you need to upgrade or buy a new computer.  If you decide to buy a new computer, I suggest a desktop computer for games.  They run a lot cooler.  Be sure to buy one with the power supply with the most power possible.  The PSU is the backbone of the computer.  If you have any other questions, let me know.

  Thanks in advance!
  
  My office details: Compaq Presario SR1932 IT
  (Adding 2.5 GB RAM)

  Rish_raj, welcome to the forum.

  Type of socket: 775

• Vista starts is no longer with my Intel core 2 duo processor.

  I am unable to start my Vista Home premium PC using my Intel core 2 duo processor. Initially, my PC came with an Intel P4 - 641, which I've upgraded to a processor E4700 Intel core 2 duo. I had no problem with the upgrade for four years until recently where it would not start.  I get the message to repair windows. I tried to repair and restore the windows are done everything to nothing. I even bought a new hard drive and a different processor - core 2 duo Intel E6600. Only when I re inserted the P4 would normally start from the PC to the top. I tried to install the firmware for vista reliability update: KB936357 to solve problems of stability with Intel core 2 duo processor. But the installer tells me that the update is not applicable, because I am running a P4. Please help as I really want to turn the core 2 duo on my system. I already installed the latest version of the bios available for my system.

  Read the section of files of dump for more information on what these files are made up of: http://support.microsoft.com/kb/315263

• I want to install c# express system my... my system config is core 2 duo processor, 1.8 ghz, 512 MB ram, 80 GB hard drive, os: xp service pack 2. What version of visual studio I'll be able to install...

  System Properties
  Core 2 duo processor
  1.8 ghz
  hard drive 80 GB
  512 MB of ram
  XP service pack 2

  Hi aneeshnirguna,

  The question you have posted is better suited to the MSDN forums.  You can post your question in the support Forums General Visual Studio .

  Hope the helps of information.

• Satellite P100-108: Question on the form to upgrade XP Home, XP Pro

  Can I put my XP HOME on a TOSHIBA Satellite P100-108/CoreDuoT2300 to
  AN XP PRO SP2.
  Do I have to reinstall the drivers?
  Someone is an expert in the field?

  Good bye
  Dominique

  Hello

  If you want to upgrade the OS to WinXP Pro you must install it from the original CD of Microsoft. After installation, you can use the same drivers Toshiba because the WinXp Home and WinXp Pro uses the same drivers.
  The drivers, you can find on the CD of tools delivered Toshiba or you're going to download it from the page of Toshiba.

  Is very important to install Toshiba stuff in the right order.
  1.) chipset utility
  2.) common modules (if available)
  Driver graphic 3.),
  4.) etc...

  You can also follow the order of installation of the driver Toshiba & Tools CD.

• Satellite P100-188 starts after the upgrade of the wireless network card

  I recenty installed a new Intel 5100 Series 512AN_MWW Mini PCI NIC in my Satellite P100 - 188 PSPA3E database.
  However, when it is installed, he refused to view and start.

  I'm sure (read the technical info) that these cards use the same interface.
  So why it won't work?
  Is an update of the BIOS to enable a feature. If so, could someone kludge one together please?

  I have the latest version of the BIOS installed 4.70 and am running Windows Vista.
  I am desperate for this that I already have a project N AP 2.0 and want to use it to its full capabilities.

  Cheers, Rob

  Hello

  If I understand your message you have improved the Interior card WLan Intel (Golan) Intel 3945ABG 802. 11a / g to Intel 5100 with project support.

  Boyfriend although it seems that you can't use the WLan draft N card in this laptop model.
  Seems such card is not compatible and cause interference.

  As I know the Draft N need of 3-wire antenna the antenna Satellite P100-188 supports 2 wires only and can be used with the 802.11 A, B or G standard.

• Satellite P100-332: Upgrade HARD drive and 4 GB of RAM

  Hello

  I'm new to the forum...
  Well, I want to change 2 things on my Toshiba Satellite P100-332

  1. I have 2 GB of RAM at 533 mhz and I saw on Everest, as well as on the information that I put up. 4 GB RAM 667 mhz. If I want to ask if theres no limitation about to use a special brand of RAM? Or can I use any laptop RAM to 667 mhz? I buy 2 DIMM 2 GB 667, to stay with 4 GB RAM 667 mhz.

  2 - my laptop came with a 4200 RPM ATA hard drive and I want to know if I can change my hard drive to another as one with 7200 RPM SATA as a http://www.pcvonline.com/productDetails.aspx?prodID=7434 and I have not seen yet if the Board supports, but does anyone know if I can put one like this?

  Hello

  (1) the Satellite P100-332 RAM can be upgraded up to 4 GB and you can also use the modules of 667 Mhz because AFAIK the FSB supports 667 MHz also.
  But the fact is that Windows 32-bit (Vista and XP) would see only 3.2 GB due to the limitation of the 32 bit OS.

  (2) the laptop supports the SATA HDD controller and this is why you must use a SATA HDD. But usually it s no matter if the HDD SATA supports the 7200 RPM. In my opinion, you should be able to use these 7200 RPM HARD drive.

  Good bye

• Satellite P100-286 - vertical on the screen restart and constant lines

  I got this P100-286 with Nvidia Geforce Go 7900 GS and recently the laptop started to freeze options even with vertical lines on the screen tried recovery cd tried to re - install and after installation, that he started to do the same. I have read similar problems in the forum and this is a common problem with Toshiba? I have spend £1500 on this and it is only 3 years old. My friends have older laptops of this almost 6 years old and in good working condition.
  Y at - it a suggestion for this problem or a solution? The heat on the basis of the laptop is really hot and it's like that for centuries.

  Any help is really appreciated after spending so much like to last longer or it is a problem of reliability with the Toshiba brand.

  Hi vns.

  Hmm strange. I have ever read on these issues here in the forum with Satellite P100. Friend of me has the same model and it s still does work correctly, no problems at all.

  Do you have the same vertical lines on a screen? If so, it is certainly associated with the internal graphics card and not watch.
  By the way: you have the same problem in the BIOS or just Windows?

  With regard to the heat on the underside: I think that it s time to clean it and remove dust. You can do this using the jet of compressed air to blow the dust from the cooling fans. That's why it of not necessary to disassemble your laptop.

• Satellite P100 - 222 PSPA6E - when the new GPU driver will be available

  Hello!

  Me laptop Satellite P100-222 (PSPA6E), a GeForce 7900GS Videocard. Vista operating system is established. Display version 7.15.11.5666 driver.
  The driver are already obsolete, to some new 3D schedules it has a bad display of structures and so on.

  It would be desirable to learn, when appears in new display driver?

  Hello

  > when will appear in the new display driver?

  Who knows I didn t find any info on the Toshiba page.
  But as far as I know the many laptop models are equipped with the same graphics chip.
  Therefore, you can also try a driver for another model that was equipped with the same GPU chip.

  Welcome them

• Satellite P100-347 - problem with the judgment during the game

  I have a problem with my (pspa6e) Satellite P100-347

  After about 10 minutes of play time with games like battlefield 2, the SIMS2 and so on... my pc stops...
  I knew it was close because of high gpu or cpu temp...

  I felt that my laptop was warm, but after playing for a while its normal...

  So I installed HWmonitor to check my gpu, CPU and disk hard temp...

  That's what I show:

  THRM: 61.C - 141.F

  CPU: core0\1 - two 64.C - 147.F

  GPU: turn 85 stable - 90.C
  This normal use... no games...

  HARD DRIVE: 39.C

  Something must be wrong! GPU temp is too high?
  I tried a fresh install of the OS...

  Thnx for all the help and answers!

  Hmm these times can be a little high.

  Most likely there is dust in the radiator. You can use compressed air to remove it. Or as a miracle solution, blow into the vents dust closes in contrast to air circulation.