Satellite P100-437: change the system from Vista to XP

Similar Questions

• How to change the system from Vista Home Premium to Vista Ultimate 64 withoute lose the option of HARD drive backup?

  IM now running Vista Home Premium 32. I would like to change the system for Vista Ultimate 64 so I can run more than 4 GB of memory. Now Ive some factory settings if something happened, I can run my HARD drive restore. My question is how to change the Vista 64 operating system, so I can keep the recovery on my hard drive partition?  Mayby there is some kind of upgrade cd?

  Thank you

  Hello

  32-bit to 64-bit is not an upgrade

  It must be done with a clean installation using a full version ' / Ultimate 64 bit license

  Contact the manufacturer of your computer for more information on getting 64-bit ultimate, which I doubt they will always

  and microsoft sells more vista

  they moved on windows 7

  and you are supposed to make this partition recovery disks to reinstall vista

  ask the manufacturer of the computer how to

• Change operating system from Vista to Windows XP Home on my Satellite A200

  I want to change my OS from Vista to Windows XP Home on my Satellite A200... once I downloaded the complete drivers compatible with XP I updated my version of BIOS to be compatible, then when I started the formatting procedure I've countered a problem when I want to choose the format of the hard drive... which is "no hard drive drivers were found.

  If anyone can help please :) Thank you.

  Hello

  The problem is that you must install the SATA driver (among others) in the XP operating system!
  You will use the FDD USB external (floppy) drive or you will create a new Win XP CD using the freeware tool called nLite (google for nLite get details).

  In addition, after the installation of the SATA driver you shouldn't t format the HARD drive because it would wipe out the SATA driver and the HARD drive will not be recognized!

  Best regards

• Satellite P100 - cannot delete the data from CD - RW disks

  I have a laptop Toshiba Satellite P100.

  According to the user manual it says:
  You cannot delete partially all the data written to a CD - RW

  I thought the idea of using a CD - RW so you could delete everything that you wanted to and use this part of the disc again and again.

  Can someone explain?

  I didn t find this info in the user manual and if you burned a few data on the CD - RW disks, then it should be possible to format this CD - RW by using a tool like Nero Burning ROM third 3rd for example.

  I've done several times using Nero and still managed

• Error 0 x 80070534 when you try to save the system from Vista to XP Pro

  Hello

  File sharing works very well between my computer laptop Vista Business SP2 and my desktop XP Pro SP3 IE. Can I manually read/write files on the desktop from my laptop and vice versa.

  I want to implement Vista Backup and Restore Center to create a backup of my Vista files on the desktop computer XP Pro.

  Backup and Restore Center, I specify the location of the desktop computer as backup destination:

  \\DESKTOPXXX\BackupFolder (I manually tested this place can I read/write files on this site of the laptop.)

  After that, Vista invites me for a user name and password for the Office:

  Username: MSHOME\Dan (MSHOME is the name shared by two PCs working group)
  Password: xxxx

  This is where I get the error:

  No mapping between account names and security IDS was done. (0 x 80070534)

  No idea why?

  See you soon,.
  Dan

  PS. I use a wireless network.

  Okaaaay, it seems I got it work by using the user name "Dan" rather than "MSHOME\Dan".

  Maybe it's just a stroke of luck, I'll post here if the problem comes back again.

• want HP how to change the system from Russian to English

  Hi guys

  I bought a laptop Russia, is a desire to hp with windows 8, I put the English language pack on it, but it's always 70% in Russian that is to say the system / settings nothing to do with the heart of it.

  It is possible to do this in English?

  regards ben.

  Hi Ben,

  Thanks for posting your query in Microsoft Community Forum.

  Basically, we need to change the language and regional settings after you install the new language on the system pack to make each look with the applications and the basic functions of configuration. So you will need to consult the following steps and check if you have all the settings in your preferred language.

  1. Press the Windows key + X, and then select Control Panel.
  2. Select clock, language and region (in the view of the categories ).
  3. Click on the language.
  4. In the navigation pane, click Advanced settings .
  5. Under "Override for the Windows display language" select English (preferred location).
  6. Under "Override for the default input method" select English (preferred location).
  7. Click Save.
  8. Reopen the clock, language and region as in step 2.
  9. Click on the region.
  10. On the Format tab, check if the Format is selected as game Windows display language (recommended).
  11. Go to the administration tab, and then select settings... change system locale
  12. Select English (preferably local) , and then click OK.
  13. Yet once, in the administration tab, click copy settings...
  14. Check the check box beside the Welcome screen and system accounts.
  15. Check the box next to new user accounts.
  16. Click OK in the tabs and close the control panel.
  17. Restart your computer.

  Check if the language changed to your preferred language.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Why I can't download Flash Player on my MacOSX10.8.6?  Adobe does not accept my password and it is impossible to change the system from Adobe!

  I tried a million times to download the latest version of Adobe Flash Player on my MacOSX10.6.8.  Adobe does not accept my password - and it's the system to change passwords going no where.  It's Kafka-esque!

  Computers Apple will ask your system password when installing new software. It's probably nothing to do with Adobe at all.

  Try the password that you used when you set up your Mac.

• On a 32-bit vista business system, what is the right way to recover from a damaged NTLDR file that prevents the system from booting?

  On a 32-bit vista business system, what is the right way to recover from a damaged NTLDR file that prevents the system from booting?

  Also, is there a powerful device filled, utility like Winternals Windows PE boot, I can download for the resolution of problems like this and others?

  Thank you in advance!

  Have you had a glance at this startup repair disk?

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Is the card in Satellite P100-437 reader also supports format SD HC?

  Hi all

  not sure if the card in Satellite P100-437 reader supports also format SD high capacity?

  Thank you.
  Kind regards
  teo_ost

  Post edited by: teo_ost

  Hello

  Please check this thread for your question:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=99339𘐋

  Welcome and good weekend

• USB ports on the Satellite L30-105 does not work after the downgrade from Vista to XP

  Hello

  Model: Toshiba L30-105 PSL33E-02S02HFR.
  USB ports (2) do not work after the downgrade from vista to Windows xp family. All the drivers downloaded from Toshiba Web site.

  Thanks for any help,

  Camellia,

  Have you installed Win XP all service packs?
  SP2 provides some patches on the USB feature.

  You definitely need to update the Win XP OS

• Vista will not start after update 12/9 - a patch prevents the system from starting.

  My computer has downloaded an automatic update on 09/12/09.  It restarted while I was at work, and when I got home he had just ran a startup repair function which could not solve the problem.  I tried to run the rapair again and it failed.  I tried to do a system restore on the eve of the update, but the operating system could not start again, and I was sent automatically the Startup Repair tool.

  When I look at the diagnostics, the message says "a patch prevents the system from starting.  I have no idea how to solve this problem.  Can someone please?

  PCrepair101,
  You try to use the package manager I link a few post above?  Otherwise, demarrer start from your DVD, type command prompt, and then follow the steps in method 2.  http://support.Microsoft.com/kb/940410
  If this does not fix it you can rename the pending.xml file and restart.  To do this, boot from the DVD and enter the command line.  Then type:
  CD windows\winsxs - press on enter
  Ren pending.xml pending.old - press on enter

  Then restart the system.

  You said "when I try to do a system restore, it is said that there is no previous restore point" and I was wondering if you have tried a "Startup Repair" not a system restore.  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Where can I find drivers for XP for Satellite P100-437?

  I need urgent help!
  Where can I download the drivers for TOSHIBA Satellite 100-437 P?
  I want to change my Opperating Vista system and install the older version of Windows XP. I met a lot of problems under Vista.

  I did score and when I want to recover using the recovery disk utility provided with the system, I got a big surprise: I lost all my data and all my partitions.

  This is a great stupidity and that's why I want to change this Vista OS with the old Win XP.

  Hello

  > I did partition and when I want to recover using the recovery disk utility provided with the system, I got a big surprise: I lost all my data and all my partitions

  Why it was a surprise? It is known fact that the defined recovery CD notebook on factory settings!
  This means that the whole HARD disc will be deleted. This procedure will delete all partitions and formats the HARD drive! Nothing unusual

  OK, now something about XP drivers
  I m wrong but as far as I know the Satellite P100-437 is a part of the PSPAGE series.
  The number can be checked at the bottom of the unit.

  I visited the driver Toshiba Europe page and found this number and all compatible drivers.
  Choose the right series, pilots and be happy B-)

• Satellite P100-437: cannot find modem and drivers for sound card for XP

  I can not find modem and audio drivers for windows XP. Help, please.
  Thanx

  Hello

  Satellite P100 - 437 (PSPAGE) shipped with Vista. Am I wrong?
  I think this is a reason why this series is not listed on the page of the Toshiba driver at the moment.

  Have you tested the drivers from another P100 series? Some devices come with the same material specifications and possibly other drivers will run.

  Maybe an additional info about the card and the modem will help you;
  It s a good Conexant chip and modem Conexant. Therefore you must find the Conexant audio drivers and driver Conexant modem software in the net.

• operating system from vista to xp

  I tried to change the operating system from vista to xp and I didn't know that it was not recommended, but it can be done, what can I do or complete installation of xp or go back to vista, but I put t have a disk for vista, there been set at the factory... can someone help me...

  NVIDIA Chipset:

  http://www.nvidia.com/object/nforce_winxp_15.26.html

   

  Audio_Choose Realtek High Definition Audio Codecs, contract, then download the file "Executable":

  http://www.Realtek.com.tw/downloads/

• Number keys don't work since the upgrade from vista to windows, anyone know why?

  Numbers on my laptop keyboard keys don't work since the upgrade from vista to windows7, anyone know why? Keys of numbers very well work in office and other software for browsers

  See the following troubleshooting steps below thanks Azam K with Microsoft Support:

  Try to activate the numeric keypad and check if it helps, here are the steps:

  1. open on-screen keyboard by clicking theStart button,all programs, Accessories, easy accessand then clickingOn-screen Keyboard.

  2. click onOptions, check thepad box and then clickOK.

  I also suggest you to start the computer using safe mode and check if it works properly, following the steps:

  1 restart your computer if it is running.
  2. tap on the F8 key after your initially on powers computer.
  3. Once you see the menu Advanced Boot Options, you can stop tapping.
  4. use the up/down arrow keys to highlight your selection.
  5. select Safe Mode and press ENTER.
  6. you should see loading drivers and wait please.
  7. you should then be at the Welcome screen.
  8. connect to your computer using an account with administrator privileges.
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If it works fine in Safe Mode, then try to perform the audit and the clean boot, here's the link:

  http://support.Microsoft.com/kb/929135

  If it is not working in Mode without failure, then try the System File Checker and see if it helps, here are the steps:

  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. click on continue or provide administrator credentials if prompted.
  3. in the command prompt window, type the following text, and then press ENTER:
  sfc/scannow

  Here is an article that will give you information about Scan SFC:
  http://support.Microsoft.com/kb/936212

  I hope this helps!

  OT

  Change options for accessibility on Windows 7
  Control Panel
  l---> ease of access Center
  I---> make the keyboard easier to use
  I---> uncheck "turn on mouse keys.