Satellite P100-473 - suddenly the screen turns black

Similar Questions

• Satellite M70 - 340 - the screen turns black after that charge BIOS

  Satellite M70 - 340 screen turns black after that BIOS loaded. Please help

  Hi Totius,

  This means after the Toshiba BIOS screen, nothing happens or you tried upgrading the BIOS? Maybe you can explain that it still a little more detail.

  The problem is in this case you can t a lot because this problem of material based on s.

  You can try to remove the battery and the AC adapter at least an hour. Then connect the two devices again and try to start your laptop.

• On the Satellite A210-14 t LCD screen turns black randomly

  For several days, I have the problem, my lcd screen turns black all of a sudden, the 'photo' is just disappearing. but the backlight is still and the system is still running (which happens most of the time in battery mode)
  When I close the laptop, pc goes into stand-by mode and so I open the pc again and the screen works again
  But this isn't really a solution.
  What can I do? Fresh grafix drivers are installed.

  BTW:
  I use WinXP

  HM, how long do you want the machine. Maybe you should check the powersaver for battery operation parameters when the display is sharp because it can be a characteristic powersaver the screen turns off.

  If please check your powersaver settings and set the time when the screen turns off at maximum or turn it off, then check if the error appears again.

  Would appreciate the your part feedaback. :)

  Welcome them

• After you enable SLI on the Satellite x 200 mode the screen goes black

  Hi all

  my name is Alessio and I encounter the following problem with my Satellite x 200-24e with Vista home 32-bit:

  Recently, I updated the operating system and yesterday I updated the VGA driver with the latest version available on the web site of Toshiba (display-20080904102618), everything worked fine but when I activated mode SLI the screen went black.

  I restarted the laptop and I tried to boot Vista on a regular basis, but I still got black screen.
  Then I started Vista in safe mode and reload the VGA drivers to set the SLI mode since the safe mode did not identify the model VGA.
  Can anyone help me solve this problem and get the SLI mode working again (I was able to set the SLI mode before update the VGA driver)?

  Thank you

  This wonderful s information.
  It of strange that the screen was dark after the SLI has been activated but it looks like it's working now.

  Thanks for your comments

• Satellite P200-RT3 - the screen turns black during the Vista installation

  Laptop worked very very slow for a while (everything worked very well - just very very slow), so I decided to restart costs after the support of all my data to the top and make the factory since HARD drive restore.

  The recovery is going very well and then after restarting Vista and is preparing to launch for the first time (prob trying to load the graphical interface of Windows), display dies - black towers with some artifacts along the top of the screen. Restart in Save Mode does nothing once it is in mode safe is it says that "Windows is unable to complete the installation in mode safe process - please restart." Restart normally translates into artifacts, like LKG configuration.

  Think something went wrong, I did the whole process again with the same result...

  Thinking the recovery partition is buggered, I grabbed a Vista Home Premium disk and installed from there... same result.

  Think display Vista drivers are buggered, I installed XP Home to rule out the possibility of a crystal display liquid buggered... XP installed fine.

  Try the recovery again... no luck.

  Hello

  Just FYI: you can create a recovery disc yourself. You know about it?
  You must only start the Toshiba recovery disc creator, which is preinstalled on your laptop. You can find it on start > programs > TOSHIBA.

  The Toshiba Recovery disk contains an image of the factory settings and it s identical to option HARD drive recovery but the drive erases the entire HARD disk.
  In my opinion, the disk is very useful, because if your drive HARD get faulty and you need a new one you can restore the settings from the factory with this disc.

  Anyway, if you have a problem during the installation of recovery, you should go to an authorized service provider. It could be a hardware malfunction, because a mistake shouldn't t normally appear due recovery facility.

• Need help from the iphone screen colors 4 change and sometimes the screen turns black

  Hello guys I need your help when I turn on my camera, my phone screen colors change, and sometimes it goes to black screen when I lock / unlock my colors sometimes phone repairs to normal, but when I turn on my camera once again it still happens

  The phone has been maintained in the past?

  To exclude a software problem, set it back to factory settings without using the backup data.

  If the screen works after that, restore your backup to new form.

  Use iTunes to restore your device to factory settings - Support Apple iOS

• Problems with Photoshop CS5 - the screen turns black

  In the last days I had serious problems with my Photoshop CS5. It works on a MacBook Pro, Mac OS X 10.6.8

  While a simple example using the stamp tool or by increasing the size of the canvas of my screen suddenly goes black and I have to restart my laptop. This had been past about 7 times consecutively a few days that the screen would go black after a few minutes of working on the photo. This has never happened before, so I am quiet worried...

  Interestingly, when I'm working on InDesign CS5 and Illustrator CS5 no such thing happens, it is only on Photoshop.

  What should I do? Help!

  Hello

  Greetings!

  Go to preferences and uncheck the enable OpenGL GPU settings running.

  Restart photoshop and try again.

  In addition, it seems to be a broken video driver or the number of the monitor.

  Concerning

  Jitendra

• Playing blu - ray movies... the screen turns black. Help!

  My laptop HP dv7 - 4197cl a problem playing blu - ray movies... screen goes black.  When some of the blu ray movies (Green Zone... tried to play 2 drives different blu - ray and "A prophet"), the disc begins to charge to the top and then the screen goes all black.  The disks are new and have no scratches.  Some other blu ray discs will play fine.  I need help.

  I already downloaded the lates bios for my computer and there is no other updates for the HP Media Smart program.  Has anyone else had similar problems?  What can I do else?

  I just downloaded the latest version of HP Media Smart DVD player on HP website and uploaded on my computer.  Once deleted my old program and downloaded the new version, he played very well.  It really sucks that HP did not offer this update on my older version that said that he had no new updates.  Thank you... I had to do this on my own.

• Satellite P100 - the screen goes black

  Hello

  I have a Satellite P100 and randomly, the screen goes black but the system continues to operate. I downloaded the latest drivers from toshiba, all power options the maximum support, run ccleaner and driver Sweeper to remove the old entries driver, re-installed the login screen of the mobo and nothing seems to work.

  The screen goes black sometimes when using windows but STILL turns black as soon as the ramps of gpu for example of playing a video or comparative analysis of the graphics card.

  Any help would be greatly appreciated.

  Model: Toshiba Satellite P100-PSPA6A-02NO21
  Processor: Intel Core 2 Duo T7200@2GHz
  GPU: Nvidia Quadro nvs 510 m
  Chipset: Intel i945PM
  HARD drive: Fujitsu 148GB
  RAM 2 GB
  Windows 7 Ultimate SP1 operating system

  Hey,.

  > ALWAYS goes black as soon as the ramps of gpu for example of playing a video or comparative analysis of the graphics card.
  This means that the graphics card is defective

  Theoretically, it could be an overheating problem too. Higher time can also cause a black screen. You should try everything that is possible to clean your laptop using the jet of compressed air to blow the dust from the cooling fans.

  If it doesn t help it seems to be a hardware malfunction but seriously a point would be interesting: have you noticed the same thing with preinstalled OS (Vista) Toshiba?

• Screen turns black during a short period of time and after 5 seconds on the Satellite A200-1DN

  Hey there
  I have a little problem with my computer, when I start a game, more games, age of empires 3, nfs most wanted, grand theft auto: vice city etc, the screen turns black during the game and then corrects itself after a few seconds, it becomes boring xtremely, especially when you are in the middle of something.
  After that the game closed in the lower right of the screen in the taskbar, a pop up appears saying my display driver has stopped responding, resulting in at least 5 different file names that have stopped responding.

  I have a Toshiba TFT screen with direct x 10(which might be the problem with the older games,i think!).
  Any help would be appreciated.
  My computer configuration is the graphics card with 1.5 GB of RAM, vista and intel 950 processor intel dual core.
  THX.

  Have you tried to play a game designed to run under Vista OS or you have noticed that play WXP games on your laptop preinstalled Vista. If possible, try to get the Vista game and test it again.

  I wonder if something goes wrong, while playing older games WXP on Vista platform.

• BlackBerry smartphone screen turns black in the Blackberry Bold 9900, but everything else, keys, touchpad screen and keyboard still works.

  It is a problem, I think that many have known, but there is no real solution to the problem. However, initially all of a sudden phone has begun to show an error (can't remember not exactly what, but something related to something does not turn) and the screen locked with constantly showing loading circling constantly clock and the narrowing of the battery quickly. what I've done; Hold the alt + right shift + del (twice) to restart the phone. Restarting the phone, the screen turns black (which indicates there is neither power or the screen itself issue and it's just a matter of graphics functionality). The phone restarts you black screen, the phone clearly charged the software couple received messages (indicating the phone works and the network also works). The phone rings again and the touchpad works if you know by heart, keyboard and the short keys for speed dial works (which means that yo can call), but the screen turned black. I think it's graphic material rather software number. I tried to do all sorts of stuff and things, did not work. Finally, I decided to restore the Blackberry software (running the latest version 7.1) so I plugged it in to the computer and run terminal BlackBerry Desktop to perform an update failed with this error: "an error occurred when downloading the BlackBerry® Desktop software. Please try again. "and offered to launch the"regsvr32 ole32.dll"in order to connect to the Blackberry server to do the update. tried, restarted my PC, plug the unit again removing battery, replacement and tried again, keep showing the same error. I tried all the advice forums, youtube videos and even troubleshooting I contacted Microsoft (running windows 7 64-bit), server connection module installed and works perfectly still having the same problem.

  I hope that blackberry had a clear answer to these questions and have someone in the customer service who can solve the problem instead referring users to the forum!

  Anyone who had experienced the same problem and found a solution, please respond. your help would be much appreciated.

  Thank you.

  The GPU is integrated into the cpu, so the phone would not ring or the touchpad does not work. It is possible that the phone fell or anything that could cause the connections on the motherboard to disconnect, I gave up my 9930 and causes the connector unplugs. Would you feel comfortable taking apart? It's easy, I think you could look up how do on YouTube. I could help you if you are on Central time or Pacific.

• Screen turns black during the installation of Windows 8 on Dell Latitude E6400

  Hello

  I have a Dell Latitude E6400

  The specifications are:

  Intel Centrino 2

  4 GB OF DDR2 RAM

  HARD DRIVE 160 GB

  Core 2 Duo 2.53 GHz

  NVIDIA Quadro NVS 160M 256 MB DDR2

  I'm doing a clean install of Windows 8 pro 64 bit. The problem is that when I get to the stage where the installation application to connect to a wifi, all of a sudden, the screen goes black and then nothing happens. Sometimes I am able to move on to the next step where the installation process asks if I would like to use express settings or customize it. The same thing happens on this stage too. I could not go any further than this step.

  I tried dozens of times, even tried 2 different iso files and event tried a 32-bit Windows 8.

  Same thing happens evrytime, black screen and then nothing. I wasn't able to find that everything related to the internet.

  One last thing, if it's a problem of display driver, I can't set either because I already formatted my HARD drive.

  Can someone help me please:(c'est vraiment frustrant.)

  Thank you

  Hi shayanjalil,

  Dell Latitude E6400 has not been tested by Dell for Windows 8. You won't find drivers of Windows 8 for this system.

• Satellite U500 - picture on the screen appears in yellow

  I use to set the external display on my laptop to extend my desktop.
  All a da suddenly the screen turned yellow.
  I can still use the screen, but everything on screen is yellowish.

  I have connected my laptop with another screen with my laptop and its yellow, so I tried to connect another laptop to my monitor and it worked fine.

  Looks like there is a problem with the hardware, I have readers of upgrade and did everything I can do with the software but not yet done :(

  Concerning
  Sagar

  > I have connected my laptop with another screen with my laptop and its yellow, so I tried to connect another laptop to my monitor and it worked fine.

  This means that this issue is related to laptop and no not the external monitor.
  I think it might be a graphics card related issue since the update of the display driver or the facility didn't change the situation.
  So, what to say. the GPU needs to be checked and to my eyes, this is a job for a Toshiba laptop technicians.

  What do you think?

• at idle, the screen go black and says cospla 1scr does not work

  When the computer is idle for long periods of time, the screen turns black with notice cospla-1SCR microsoft looking for correction does not. This happened for several months now.

  What program is it and can I remove it does not, and microsoft has no answers to fix it.

  I think the message is Lightn ~ 1.SCR. That would be a problem with the screen saver you have.

  Go to control panel of configuration, appearance and personalization or customization in Classic view, and then click Change screen saver and choose something else.

• Screen turns black and does not return. One stop forced

  When I leave my computer for a while, the screen turns black and does not return when I press 'enter', or any other key.  I do a forced shutdown (turn off with the power button).  Can I get, and the "incorrect closing" message when I turn on computer. I think that it is a problem of Hibernate.  Any ideas?.
  MMM

  Original title: hibernation problem?

  What happens if you press Ctrl + SHIFT + ESC when you want to get out of hibernation?

  You use a wireless keyboard and mouse with a transponder. What happens if you press the button on the transponder?