Satellite P100 fails to install TEMPRO 2.0.3

I downloaded using latest winzip TEMPRO 2.0.3 but shortly after that the installation wizard starts, it closed its doors, and a fatal error "installation ended prematurely because of an error" message.

No error code is provided.

Suggestions, how can I get TEMPRO to install and work properly?

Note - I'm running under VISTA 32 bit and I don't think I have a previous version of TEMPRO, but not sure.

Thank you.

Please remember if old Tempro version is installed on your computer laptop Control Panel > programs and features.
If so it must be registered. Please remove the old version, restart the computer and try to reinstall the latest version.

Tags: Toshiba

Similar Questions

  • Re: Satellite P100-223 - cannot install audio driver

    Hello.

    I reformat a Satellite P100-223.
    The downloaded audio driver sound-20071106151533 does not install.
    The installer written device not found.

    All of the suggestions.

    Thanks in advance.

    Hello

    Satellite P100-223 belongs to the series of PSPA3E.

    The sound chip comes from Conexant.

    If you need an audio driver Conexant.

    I don't know what OS you are using but the Conexant audio driver can be downloaded from the European driver Toshiba page and should work well!

  • Satellite P100-429 - cannot install the display drivers for Win XP SP3

    Hello

    I have Toshiba p100 429 portable, installed with win xp professional sp3. I am unable to change the screen resolution of 640 by 480.

    In fact, I tried to download the toshiba site display driver but after installing the driver, it gives a blue screen with error error NV4_mini.sys.

    After that I can't yet run my laptop.
    I currently use the external monitor (master B2230 synchronization). I also tried to download the drivers from the Nvidia site, but that does not work either.
    Low resolution on my screen. Thanks for your help

    Have you tried to install THIS driver?

  • Satellite P100-347 - cannot install the new VAP

    When you use the Flash cards they still "spoil" i.e. blurring and basically they are unusauable. I went on the site of toshiba and downloaded the latest package of added value.

    However, when I run the Setup it says its already installed and I should remove in Add/Remove Programs (Control Panel). However, it is nowhere to be seen in the list and ive also studied on ccleaner and advanced unistaller pro. There is no way that I can remove the old... so I can't install a new!

    Any ideas?

    Info...
    Date 2009-02-21 22:30:45

    [Information on PC]
    Model name Satellite P105
    Part number PSPA6U-03D019
    Serial number X6093498W
    Version of the operating system Microsoft Windows Vista Home Premium 6.0.6001 Service Pack 1
    Version of the BIOS V4.50
    Processor Intel (r) Core (TM) 2 CPU T7200 @ 2.00 GHz
    Physical memory 2048 MB RAM
    Disk capacity hard 200,811,003,904 [bytes] 187.020 [GB]
    Capacity of the hard drive space free 112,906,539,008 [bytes] 105.152 [GB]
    Video NVIDIA GeForce Go 7900 GS version = 7.15.11.5666
    Screen resolution 1440 x 900 Pixels
    Color quality, true color (32 bit)
    Sound version of Conexant High Definition Audio = 3.18.0.51
    Version of Intel (r) PRO/1000 PL Network Connection Network = 9.11.5.7 = 00:16:36:95:6 B MAC address: 99
    Intel (r) PRO/Wireless 3945ABG Network Connection version = 12.2.0.11 address MAC = 00:18: OF: A8:74:BF
    Modem HDAUDIO Soft Data Fax Modem with SmartCP version = 7.35.0.0
    Internet Explorer 8.0.6001.18372
    IDE Device FUJITSU MHV2200BT PL ATA Device
    FW version device ATA HL-DT-ST DVDRAM GMA-4082N PT06 of =

    Any ideas, I would be grateful! Thank you!

    Hello!

    That s nice and thanks for the comments.

    Good bye

  • Re: Satellite A300 failed to install Win XP because the HARD drive is not visible

    Hello

    I tried to install windows xp after windows 7 but Xp instalation can not find the hard drive.
    Someone told me I should reinstall the sata drivers can anyone help me?

    A300 Psag0e

    Yes, you need to reinstall the SATA drivers or you will go to BIOS and set the SATA from AHCI mode to compatible.

    But why you don t use the option of searching this forum?
    There are a lot of discussions on this subject and it s not necessary to create 1000 threads on exactly the same topic. ;)

  • Satellite P100-347: blue screen at startup - unable to boot volume

    Recently, I left my 2 younger brothers playing NFS Carbon on my satellite P100-347, pre-installed with media center edition 2005, and now it fails to start.

    During the process of possibly starting a blue screen appears for about a second and then it shutsdown (I managed to make the words "unable to boot volume" on the basis of the blue screen).

    I tried to boot with a XP media center DVD but it gives me only a possibility of reinstalling the operating system with a cost of losing all my important data. Normally I would have picked up the system, but I don't want to lose my data.

    Can I do other than take it to a technician?

    Hello

    Well, for the most part the BSOD appears due to hardware problem or serious software.
    In your case, the software problem is possible

    Unfortunately, I think that the new installation of the OS is the best way to get the laptop works properly.
    Now, you want to know how to record data and the files well, I think that you should remove the laptop HARD drive and must try to connect the 2.5 HDD via external USB controller to another computer. Then you can save the files to the other HARD disk

    I think, now, you know that regular backups are important and necessary!

  • Re: Satellite P100-160 - failed display driver installation

    Satellite P100-160, PSPAAE, 32-bit vista.

    Today, Aero is not working and not available in graphics properties. Later installed the site of Toshiba UK, 15.0.1.1114 Intel display driver. This version was actually older than my current driver but I thought that maybe she was the only availabel that it must be correct.

    The driver installation failed with an error (no details don't just "year error has occurred"). Now, I don't have aero and my screen resolution cannot be set above 1280 x 800 - 1440 x 900 is expected

    To say that I'm pisseed would be an understatement. Can anyone help? Thank you

    Hey,.

    If Aero is not available I think that it s display driver problem

    In any case, did you remove the old display driver before installing a new? Go to Device Manager > right click on the graphics card > uninstall. After the restart the display driver must be uninstalled and you can start with the display driver installation.

    If you install drivers make sure you are logged in as administrator and antivirus/firewall is disabled. Reboot once again and you should be able to choose the native screen resolution now.

    Check this box!

  • Satellite P100: HARD drive sometimes fails to start or just not responding

    I have a satellite P100 on xp professional service pack 2. Sometimes it fails to start and appears as if the hard drive just stopped responding, does not require defragmentation.

    Checked all Diagnostics pass, can get it started by selecting the boot options multiple F12, HDD that appears first in the list.

    Although it seems not take a long time.
    Sometimes it seems to stall at the start to the top but picks up then after a few minutes and fortunately sometimes it starts without a problem.

    What is data corrupted in the bios? but then why it starts ok sometimes and not others? It doesn't matter if it's hot or cold.

    any ideas or help greatly received.
    David

    Post edited by: daviddean

    Hello David

    It's a very strange situation, and for me there is no explanation simply. In my opinion the laptop or HARD drive, the functionality must be tested properly. Here in the forum we can speculate just what is the problem here but mobile startup must be tested with the other HARD drive pre-installed with original recovery image.

    It will be interesting to know if the problem disappeared with new HARD drive. So what you can do now? If possible, try to get the second HARD drive and do the only testicles or make a call to the authorized service center and explain the situation. If the laptop is guaranteed to be valid, it will be better to check in service because they can replace free HARD drive (if the HARD disk is defective).

    Sorry, but I don't see another solution. Some test with the new HARD drive can help you to understand if this happens because of the HARD drive. I don't think that the BIOS can be responsible for the issue described.

  • Satellite P100-106: can I install Windows XP x 64 edition?

    Hello everyone,

    I have windows XP Home Edition installed on my Satellite P100-106. Does anyone know if I could install the x 64 edition without any problem?

    I mean, are the drivers offered by Toshiba ok for XP as well as for XP x 64?
    I'll be able to use the same programs, or I'm going to need some other versions?

    Thanks in advance

    Hello

    For the moment, Toshiba offers not all 64-bit drivers. :(

  • Satellite P100 - no sound after installing Vista SP1

    The machine is a Satellite P100 just more than a year, came with Vista installed. No problem until today when Vista SP1 has been automatically downloaded and installed. Now I have no sound from speakers or headphones.

    I've uninstalled and reinstalled the driver Conexant Audio Hi-Def to the latest recommended on the Toshiba site.

    I tried to restore to before the time when SP1 was installed.
    I updated the BIOS to the last on the Toshiba site.

    I pulled my hair.

    Someone at - it any other suggestions?

    It s certainly a useful information. Thanks again!

  • How to install Windows XP Home on Satellite P100-488?

    Hello

    I have a computer a Toshiba Satellite P100-488 and on windows vista, but I would go to windows XP.

    What should I DO, please?

    Hello

    Installation of Windows XP Home edition on this model of laptop doesn't have to be so complicated.

    At the first visit Toshiba under you and http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp download page you can find all the drivers, tools and utilities for Windows XP Home edition. Under product type, choose ARCHIVE. Your Satellite P100 is model PSPADE, so choose the right model.
    As the first file listed by download is installation instructions document. After installing WXP install all the drivers, tools and utilities following this order of installation. It is very important.

    Good bye.

  • I can't install the drivers on the Satellite P100-387

    When you install the drivers on a laptop computer error message Satellite P100-387.
    The operating system has been installed from the disk.
    The figure shows a screenshot. (http://s2.ipicture.ru/uploads/081003/BtGJuFhOOE.jpg)

    How to install drivers for video cards?

    You can then write in Russian?

    I don t understand Russian and in this forum you can post ONLY in English! So please respect it!

    On your screenshot, I see that you tried to install a driver from nVidia.
    You have to use and install the graphics drivers from the Toshiba page!
    The other pilots graphics from NVidia or ATI are not supported and usually these drivers should be used due to the risk of overheating graphics.

  • How can I install Power Saver on Satellite P100 with Windows XP

    Hello!

    I need help: how to install Power Saver on my P100 with Windows XP Home edition. I just bought new laptop with Windows Vista, but when I tried to work with him, he shows me blue screen. So I decide to delete Vista, because it is total c... and back to my old Windows XP operating system. Now, I have problem with Power Saver... I download Toshiba support, but it does not on my computer. What should I do?

    Thank you
    Wooy

    Hello

    As much as I know Satellite P100 units has not been handed over with Toshiba power saver.
    May I ask where did you download the saver of energy for Satellite P100?

    I assume you want to install utility is not compatible on you P100 and, therefore, it of not possible to install it.

    Nothing to buddy

  • Can I install Windows Vista on my Satellite P100 English more?

    Hello

    I had Satellite P100-448 French added to Windows Vista. In the properties for the computer, it is said that the location of the PC is France. Get and install the English Windows Vista for my P100-448?

    Thank you

    You ask a Vista language added? Sorry dude, but something like it doesn't exist.
    If you want to use the English version of the Vista operating system you must buy the full version of the Vista operating system in the English language and install it on the laptop.
    There is not another way to get the Vista in English

  • Can I install professional WXP on my Satellite P100?

    Hello

    I have the Satellite P100 - PSPA3C-SD300E laptop computer and I need to install Win Xp Pro

    The laptop came with Win XP home but I need to use a few programs (Microsoft Virtual PC) requiring a Win XP Pro

    Does anyone know about all the problems of the use of XP Pro on this laptop? I'll take a guess that there is no problem since it is only 3 months old, but I wanted to check.

    It would be great if someone has any point of view that I intend to update tomorrow

    Thanks in advance

    Post edited by: Ben2006

    Hello

    If you want to install WinXP Pro, you must first install the operating system and then all the Toshiba drivers and utilities in the correct order.
    Win XP Home and Pro uses the same drivers. The difference between Pro and the House is not very big. The Pro has more features administration and configuration that you can control yourself. The Home version is designed for common Windows users.

    Anyway, what you have to do is to install the drivers after installation of operating system and you must follow the installation guide that you find on the page of the Toshiba driver.

    Good luck

Maybe you are looking for

  • I would like to have "https" should I can how do I get it?

    with all the 'hacking' underway, I thought I'd try https, but I do not know how to start. or if I should go to https. Told me to firefox, it's easy to add the https address, but I don't see any tab for Add-ons

  • HP OfficeJet J4580 all-in-One: OfficeJet J4580 all-in-One printer driver missing after recent update Windows 10

    After a recent update of Windows 10, my printer has stopped working. The message is that there is no driver. I tried to download the software from the website of HP and installation, but nothing changes. Copy and scan from the printer functions still

  • No noise in Portege R600 on XP

    Hello I just bought a Portege R600 (PPR60E) downgraded to XP due to the requirements of the company...Installed XP SP3, downloaded all the latest drivers from TOshiba support, update the BIOS to 1.80. Problem: I can't get the audio working, he remain

  • IronPython 0xfffb4e36 script error code

    time of importimport NIVeriStandfrom NIVeriStand import NIVeriStandException WKS = NIVeriStand.Workspace2 ("localhost")SYSDEF = r "2013\Projects\Pump\Pump.nivssdf C:\Users\Public\Documents\National Instruments\NI VeriStand"print 30 * ' + '.WKS. Conne

  • How do automate you a pwm signal?

    I think I should do exactly what this guy: http://forums.NI.com/T5/LabVIEW/dynamic-duty-cycle-change-for-PWM/m-p/2360002/highlight/true#M735803 Except that I don't have vague sinosoidal, pulse train is fine. I need automation because I have to genera