Satellite P20: unit stops during playback of DVD

Similar Questions

• Satellite A500D-10F stops during playback of Skyrim

  Hi guys,.

  I installed it a while ago and it failed high heat at the start of the game. After a few minutes of play, the computer laptop everything stops. No error message or anything. Meanwhile, Skyrim was still running, I noticed fan of the laptop seems to be stronger and he blew off of hot air. Reduce the display resolution works on other games when that happens, but I was hoping to maximize the ability of the laptop regarding Skyrim, as much as it is lacking in high heat. In fact I don't really understand why even the older games such as neverwinter nights 2 gives me this shutdown problems when it should play with no problems at all founded.

  Is that you could suggest that could avoid this... and not to mention having my play time go beyond 7-8 minutes that when running on the laptop... It would be just sad playing this game on 1020 x 768 when your screen can accommodate higher than resolutions :D

  Thank you

  -arveg2

  Are you using the original operating system that you got with your laptop?
  Have you defined the parameters of high-performance power?

  Have you tried to disable all unnecessary processes before the games begin?

• Satellite P100-188: his stuttering & distortion during playback of DVD and CD

  Hello

  My laptop has developed for the second time, what I can only describe as "stuttering and distorting" during playback of dvd and cd try to burn or rip a cd does not work either.

  The first time this has happened was a few months ago and PC World did a reinstall of windows that solved the problem. It is now again.

  Any help would be much appreciated.

  and why you n t try to reinstall the OS again?
  Seems to some operating system files or registry entries are corrupted.

• Satellite P20-842: Question about product Recovery DVD-ROM

  I have a portable satellite P20 842.
  I received a DVD of recovery of product with it (2 DVDs)
  I would like to format the hard drive!
  When I try to use the DVD, I get a message "starting windows 98"
  some 900ish files copied and then NOTHING! I restarted and I get a message from stiarting windows XP...
  My questions
  (1) how to use the DVD to format the hard drive!
  (2) when I bought this laptop, it had windows XP preinstalled... so where windows 98 come into picture?

  I need to format my disk ASAP as my comp hangs...
  I need HELP! AS SOON AS POSSIBLE!

  Hello

  Don t be afraid. Everything is ok.
  The restore CD contains the ghost image files and it uses the files Windows 98 MS system to boot from the CD.
  It is usual that the Win98 message during initialization.
  In addition, the recovery CD formats and automatically remove the HARD drive.
  You have only to boot from this CD and you select standard mode.

  In this case the recovery CD is completely erase the HARD drive.

• No sound during playback of DVD in Windows Media Player

  1. No sound during playback of DVD in Windows Media Player.

  Media Center recently stopped working altogether, the message alleges a solution will be found, but he never comes to the top with one and there seems to be no resolution right ahead of internet, I can see others too have a similar problem.

  So I would try Media Player, no joy it is thinking.

  It reads the dvd no sound, I go into options and make sure the external emu sound card is set, yes all well, but as soon as I put it on youtube videos sound turns off by train to play media player so a sort of conflict, if I close Opera / chrome browser and reopen his is back.

  Update or reinstall the drivers for the sound card in Device Manager, checking the PC or Support Downloads Web page of the card for more recent or different driver.

  Physically, reinstall the sound card to make sure that the contacts and the slots are clean and tight connections.

  If you have an audio chip embedded, try to use it to compare.

  Try the VLC media player to see if it has the same problem.

  Have you updated flash player for your browser?

  Try another browser to compare.

  Establish a clean boot, check for infection and then run the System File Checker of the steps in troubleshooting for Windows 7

  For irreparable system files, run a repair facility.

  It's much lower plant?  If so Clean Up Factory Bloatware and consider to go from worst to best with...

  Maybe it's time for a clean reinstall Windows 7?  The steps in the link provide the best possible installation.

  Report on the results of other ideas.

• Lenovo G470 keeps stopping during playback of videos for internet spontaneously

  Hello

  I have a Lenovo older G470 of 1 week I've discovered recently guard spontaneously stopping during playback of the facebook/youtube videos. This occurs regardless if I'm on battery or connected to AC power.

  My G470 has an i5 - 2410M with 8 GB memory, ATI Radeon 6370 M and runs Windows 7 Home Premium 64-bit.

  Someone has similar problems? If so is there a fix?

  try the bios flash update and/or to update the drivers for graphics cards.

  http://consumersupport.Lenovo.com/UK/en/DriversDownloads/drivers_list.aspx?CategoryID=792128

• Windows Media Player Version 11 does not properly during playback of DVD

  Original title: Windows Media Player Version 11

  Windows Media Player has developed a jitter during playback of DVD, I have not modified parameters.

  Hello

  1. what exactly is the problem you are experiencing with Windows Media Player?
  2. you receive an error message?
  3. don't you make changes on the computer before the show?

  Method 1: Fix the term.

  Solve the problems of Windows Media Player video and other media or library:
  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

  Method 2: If the problem is not resolved, you can try the procedure in the below mentioned link and check if it helps.

  Read CDs and DVDs:
  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/play-CD-DVD

  Hope this information is useful.

• Satellite P20-304 stops unexpectedly

  I have a laptop satellite P20 304 coming sometimes turns off without warning.
  The screen goes black and the power is off.

  This sometimes happens during a search, but alos is writing a letter. If not necessary a high workload for the laptop.

  Opening vents are free etc. I guess maybe an overheating problem, but wonder if this causes this kind of stop procedere.
  Also - there no poping blue screen or report failure upwards by re-start such as "the system will be re-stored after a major system crash ect.

  No idea what it could be.

  I installed Sandra Sisoft to monitor the temperature, but it only shows me no module to control the temperature,
  respectively, that it does not work.

  My warranty runs out in June, so I want to make sure that I can claim any defect prior to that.

  Thnaks for any input,
  concerning
  Birgit

  Hello

  It's not very easy to say why this laptop stops. It could be an overheating problem or a malfunction of the software. But I tend to overheat.
  Well, the problem of overheating occurs due to her malfunctioning fans or malfunction of the equipment.
  I assume that your warranty is valid, so I recommend you to check your laptop in service partner. Maybe, it can give you a good answer, why this problem occurs.

• Satellite Pro A10 stops during the installation of Windows

  I have a satellite Pro A10, which stops during the installation of Windows. The installation gets to the part where I need to select the HARD drive to install, then the system off just. I can restart it immediately, and the sdame happens.

  If I enter the BIOS, everything is detected OK, and I've updated to the latest version (V1.4). Also when in the BIOS, the system will remain under tension for ever and a day! and no downtime. I have a couple of diagnostic CD, then run the tests is the same thing, but I ran the seagate diagnostic tool and the HDD OK passes, as does the main map, but cannot perform detailed testing that the system shuts down during the tests.

  I suspect an overheating issue but would like advice.

  Hmmm it s very strange. I thought that the HARD drive could malfunctions but it of very impossible if the HARD drive has passed the Seagate diagnostic test.

  However, it would be very interesting to know if the installation of the OS would end with another HARD drive.
  You know, it of always difficult to provide an exact solution without any diagnostic tests.

  For me, it really looks like a hardware malfunction. So perhaps it would be advisable to contact the authorized Toshiba maintainer for a control of the laptop.
  Guys could run tests and would situate the fault quickly.

• Satellite P20 S203 stops suddenly

  Hello

  In the last month my Satellite P20 S203 does so well, and unfortunately it seems that the problem is a hardware one (but I'm not sure, and that's why I'm writing here)

  The computer just stops suddenly (it happened 2 or 3 times in the last 30 days); every time it happened I was on the web on Firefox, but I'm sure that has nothing to do with it, and I'm also 99% sure that this is not a virus, malware or something like that, cause I formatted there are 3 months and nothing else behave in a strange way, the computer is slow or something like that.

  The last two options are that the question can be of a physical nature, or a software (as a conflict between the operating system and installed programs); I'm more to the first, but I do not know and I need assistance to find out... What should I do?

  In addition, when it stops suddenly, it won't turn with the first try.
  He needs like 10 or 20 times to open like an old car that won't start; the first, say, 5 times I try to turn it on, it appears only the toshiba logo.
  It then passes through a screen, I can not read because it goes too fast.

  Then a black screen, then it turns off again.
  With the next try that it goes a bit further, as it displays the windows logo, but as this image is fading, it stops halfway through the fading process, resulting in a darker windows logo, as it is too difficult for her to load the OS!

  But then it turns off again!

  Then after a few other attempts it finally loads windows.

  Any help would be much appreciated, thanks!

  OS: Windows XP SP2

  Hello

  Maybe the laptop stops due to a higher internal temperature.
  High temperature leads to an overheating of the questions and the laptop would be stops down automatically to prevent the equipment from damage.
  The other point is that the high temperature may affect the RAM modules.
  In this case the laptop computer may freeze or you will receive a Blue Screen Of Death.

  I had a similar problem in the past. About 6 years ago my first oldie started to overheat.
  I cleaned the cooling modules, but the questions again.
  Finally, I contacted the laptop technician in downtown, and he said that the thermal grease that is placed between the cooling module and the CPU must be renewed.

  He did, and it helped!

• Satellite P20-932 stops because the temperature is too high

  When I use my Satellite P20 932 for about 30 min, temperature will rise very quickly! The laptop is automatic turning-off, without any error message.
  I try to clean the fan at the bottom of the laptop.

  I'm really desperate.

  Please help me!

  It of a just in case of overheating.
  The laptop stops automatically to prevent the laptop from damage. It seems that the temperature has risen to the critical level.

  I guess that the laptop is a little older and cooling modules and fans inside the laptop can not operate properly because of the dust and debris.
  The cleaning of the cooling modules is a great idea, but you must be careful.
  If you have no experience, ask a technician for professional cleaning.

  Additional you should be sure that there is enough free space around the laptop. It is important for the movement of air correctly.

• My Project stops during playback

  Nice day!

  I have a project, want to post it, but when I desided to check, I saw an error - it stops the playback of the slide - when the title appears... And I have to press on ">" button to play this slide at all.

  

  Although I can't do what they say, it would appear that you have three buttons at the bottom of the slide. The default behavior of a button is to stop playback of a slide until he was selected by the user. So this slide should not pause, you must configure the buttons so they don't break. Look at the properties panel to change this behavior.

  See you soon... Rick

• Satellite Pro 24xx: no sound during playback of DVD

  I have an old 24xx Satellite Pro. It works fine and I don't know when that changed. Now I have no sound when I play a DVD. The image is fine. I made sure that none of the Mute check boxes are checked etc.

  Just can not make it work. The only thing I installed recently is IE7.
  Can anyone help please?

  Hello

  Can you check the sound settings on the program that is used to play DVDs s?
  I use the WinDVD to play a DVD on my computer. There are also other programs like PowerDVD or free tools that can be downloaded from the internet.

• Satellite A100-847: movies DVD stutter during playback of DVD

  Hello
  I have a problem when I play movies from DVD or CD sound and video jerky.
  When I play only HD music, the sound is not clear (virtual sound option is activated) - hear kind of static and the radio...

  Someone had this kind of problems? How to solve it?

  Thanx

  Daniel

  Hello Daniel

  Can you please tell us what player you use? Is this the same problem when listening to the music of original music CD?

  Before archiving this stuttering sound and video problem try to stop activity of the antivirus application. It is well known that this activity could commit very busy CPU and result is image and his stuttering.

• Still under menu stops after 15 seconds during playback of DVD

  Hello

  I built a DVD with a menu SUP to 6 scenes of the templete Rose.  I did the rollovers. When I go through in the overview, the movement keys repeat. When I play the DVD I have about 15 seconds to choose a scene or DVD goes to the home screen (not the main menu root) as when first put you the DVD in.

  I put the end action for the menu to stop, a link to here and return to the menu. Whenever I burned a DVD new but had the same problem. I know it must be something simple that I'm doing wrong... I hope! But can anyone give me an idea?

  Thank you

  Art

  Screenshots are good!

  Post a screenshot of each menu with properties tab and tabs of the motion. (4 screenshots)

  One of your chapters have stock of end? (they shouldn't)