Satellite P300-27 t - Vista installation problem

Similar Questions

• Satellite P300 - 156 Windows 7 Crash problem

  Hello
  I have the Toshiba Satellite P300 - 156 PSPC4E, model and I've had this laptop for a couple of years now.
  Before installing windows 7, I got the default Windows Vista installed and it worked fine.
  Now since installing windows 7, no matter WHAT game I try and play just causes the cell to go black screen and turn off after about 5-10 minutes of play.
  I thought that this was due to an overheating problem... so I opened the laptop and cleaned all that and then put it back together again.
  (YES I checked all the wires are back where they should be and all the components are working properly)
  It did not work.
  Then I tried updating all my drivers and software ect.
  Still nothing.
  I searched on through pages and pages of search results for the same problems with Windows 7 and the game crashing... but nobody seems to know how to fix it.
  I thought it was just windows 7, but I re installed windows vista and it's always done the same thing on there now.
  I tried to install all the drivers of the model for this laptop toshibas site and not luck.
  My windows vista and windows 7 are two authentic copies.

  All the hardware is functioning normally (as far as im aware) and I really don't see what can cause this problem.

  If someone could give me some advice on what to do it would be greatly appreciated.

  Thank you

  Hello

  Which driver you use display? I m P300 owner but not on my A300, I had a similar problem that the laptop has crashed during a game. It seems that the reason was a 3rd party driver or let's say the driver of the manufacturing of the graphics chip directly. I think that because they are not prétestées on the cell and causing overheating

  So I recommend you to install the latest driver of display on the Toshiba site.

  Finally and above all what version of Windows 7 (32 or 64-bit), you have installed and what version of BIOS?
  From Toshiba Web site also shows the new BIOS versions and several versions 32 bit and 64 bit OS. Maybe you have to day/edit, who knows?

• Can I downgrade my Satellite P300-1GN from Vista to Windows XP Home edition?

  I bought a Toshiba Satellite P300-1GN with preinstalled Windows Vista Home Premium (PL) on this subject.
  Given that some of the th sotware I use only works on XP I have to install XP on my laptop.

  This laptop works with XP?
  Is it necessary to have any special disc or can I install from an ordinary copy XP (boxed version) are all the drivers available?
  Any tips how to perform the downgrade?

  Help, please.

  You can install WXP on your model of laptop. It's Windows XP Home supported and you can find all the necessary drivers WXP, tools and utilities on Toshiba support download page - http://eu.computers.toshiba-europe.com

  For Windows XP Home edition, you can use disk Microsoft facilities.
  On this forum, you can find hundreds discussions on installing WXP on Satellite A300/P300 with instructions specific to how to proceed. Therefore, use the advanced search option and read a little what others have written about it.

  If you still need assistance please let us know.

• positions 32-bit Vista installation problems

  Mr President
  
  I installed newbie.i 10 gr 2 in my vista, but sometimes his departure perfectly and sometimes not. Then I have to restart my machine and then only I get access in sql * plus.i have posted here but the problem is always the same. [post installation problem its not solved still | http://forums.oracle.com/forums/thread.jspa?threadID=930824 & tstart = 0].
  
  When the bellows maintained command isn't leaving no output at all.

  emctl start dbconsole

  IN the function panel shows dbconsole status as a server starting at only.
  
  What should do?
  
  
  
  concerning
  Chrystelle

  I do not know I hope that any interpretation (put) the OS environment that you provide. Your best bet is to look at the documentation.

  http://www.Oracle.com/pls/db111/portal.portal_db?selected=11&frame=#microsoft_windows_installation_guides

• Satellite P300-1FN: CD/DVD drive problem - can not read the DVD game

  Hello

  My brand-new Satellite P300-1FN loaded some software using the DVD player ok, but now when I put any disk in is not automatically run, but the drive seems to run to the top and then a pop up tells me after going computer-> DVD player to get access - burn a disc and wants to get in shape.

  The disks I put in are game DVD and other software to load but they all give the same pop window.

  DVD player isTSST CDDVDW-TS-L633A

  Can you help me?

  Enter Control Panel > "Auto play" and define what should happen if you insert a media software and games.

• Vista installation problem

  I recently had a hard drive on my Vista crash.

  I bought a new hard drive and began to install vista on it.  Whenever he develops the files copied to my hard drive, it freezes.  I tried so many times and it always freezes during the stage of expanding files.

  Does anyone know a way around this?

  Unplug everything except keyboard/monitor / mouse ther.

  Here's how to do a clean install:

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite P300: Microsoft Windows Media Player problems

  Hi, I have trouble getting all the sounds of WMP 11 after about 10-15 seconds. I can get sound for 10 seconds and then no sound, but WMP still continues to play. Same thing when you try headphones. I have no trouble hearing my TV modem sounds and other sounds of Windows (I have recently changed from 32 to 64-bit one no problem with sound)

  My laptop is a Toshiba P300/05Y, P7450, 4 GB of Ram with Windows Vista SP2 x 64 installed. In Device Manager I have drivers listed as Conexant High Definintion SmartAudio 221 and high definition Audio Device (I think this one is for the HDMI output) (there is also a 71st Pinnacle PCTV which is for my modem TV).

  I checked the two audio devices are up-to-date with WMP11 - all of which are. What else can I check to get WMP works again? Oh yes, I use the media through the media player (although I did try and play music over there just to see if it made a difference, but not the question)

  Just a question:
  Have you noticed same problem using another player like WinAmp?

  I just want to understand if there is a sound problem general or simply associated with WMP 11.
  Is that what you have installed this update?
  Did you also install the codecs or codec package such as K-lite

• Satellite Pro 6000: Windows XP installation problem

  Win98SE works well on my Satellite Pro 6000. I put XP on it.
  During commissioning, I see the logo "windows XP pro. But after loading XP, I have no picture.

  Save mode then also does not work, I can't see anything.
  What I've done wrong? It seems that the video driver is missing?
  With the recovery cd is everything works again. (win98se)

  Someone at - it solution to put XP on this laptop?
  Gr. R.

  Hello

  In my opinion, there should be no problem with the use of Windows XP on this unit.
  As far as I know the laptop came with WinXp pro, W2k and Win98SE.
  In this case, all required drivers are available and must be installed in the correct order.
  I assume that the installation and the installation procedure has been authorized. Did you install it on a second partition? You format the HDD to NTFS?

• Satellite A100-192: after Vista installation HARD disk capacity has decreased

  I am a user of Satellite A100-192 with 120 GB hard drive. After I installed Vista Ultimate, I saw this total capacity of my hard drive completely passed to 92, 8 GB instead of 120 GB while it was XP.

  What can be the problem? How can I reach the other capabilities of my hard drive?

  Hello

  Vista needs and used 2 partitions. The second partition is not visible and it s necessary to Vista backup and restore functions.
  Maybe you have verified that the size of the first partition (C) and didn't note the size of the second partition.

  Concerning

• I have Vista installation problems

  I bought Vista Ultimate in March 09, I bought a seagate Barracuda 500 g to install it on.
  Aiinstalle it ok andcommenced transfer my files a few days later, my new hard drive crashed with vista and all my files. I bought a new drive 650g go digital and decided to install vista again, this time in 64 bit (no mistake no drivers for my sound card after spending a week sent to the sites of the manufacturers to get the last 64 drivers, I gave up in disgust, I have now returned and installed vista 32 on digital weston.)
  My mow question is that vista is going to blow up my new drive (it has a compatibility issue with the large capacity disks.)
  can I use a program to drive to make it easy for me to up grade my drivers?
  can I get a registry cure for vista Microsoft does have a list of compatible service programs available.

  To go to 32-bit to 64-bit, you will need to reformat and do a clean install. (Although it sounds like you have already reinstalled Vista)

  This means backing up your data in first place, Windows installation, drivers and all updates. Then install your software.

  There is no problem of compatibility with the large capacity disks.

  You will need to install fresh 32-bit drivers.

  What do you mean by 'save the cure for vista?

  What do you mean by 'service programs? If you mean that security programs, as far as I've seen that all modern security programs are compatible with Vista 32 bit.

  Here is the link for compatibility - http://www.microsoft.com/windows/compatibility/

  Microsoft partner - "gentlemen, you can't fight in here! This is the war room. »

• Vista installation problems

  I have a Pavilion a6334f running Vista 32 bit.  I ran into problems with the Western Digital hard drive and replaced one in October and now do the same thing in December/January (replacement of WD drive showed error.).  I had HP recovery discs that I used in the OCT reinstall.  (The game I did when I first bought the machine does not).  I used these to recreate the initial installation of the machine.  The process is going well, but met an obstacle at the end of the installation.  He stopped with a message "Windows Setup could not configure Windows to run this hardware.  It's strange because it's the same drive I ordered from HP to reinstall, I had to do in Nov.

  Well, I've tried decided to try a reinstall with recovery disks that I created on this same machine.  (These were created after that I got the machine in Oct.)   This time I got the OS installed and working, but now Windows will not update.  I get an error message which is a Code 8024 A 000.  Nothing seems to work to solve this problem either.  The operating system seems to think that it was updated on October 19, which is probably when I started the installation on the first hard drive.

  Any ideas?  Start with either scenario.  Scenario 1 I used an HP provided set of disks.  Scenario 2, I used recovery disks that I created on this machine.

  I fell on the fix.  It turns out that I needed to install a newer version of the Intel storage driver version 9.6.0.1014 for my machine.  The site of HP had only version 8.6 on it.  Once I put that on the updates started working.  I remember seeing errors in my log windowsupdate that indicate an error of data store, so I guess this should be a tipoff.  Intel has a utility that you can download that will show you the good update.  Someone had suggested earlier the upgrade to version 10, I think, but that did not fix the problem.

• Network Tecra M9 Vista installation problems

  Hello

  Have just got a Tecra M9-136 that I try to install with the English version of Vista Business.

  Vista refuses to connect to several websites:
  Update.Microsoft.com
  www.Microsoft.com
  www.Intel.com
  LiveUpdate.symantecliveupdate.com

  The links below works well even if:
  support. Microsoft.com
  www.Dlink.com
  www.LinkedIn.com
  www.VG.no
  www.Aftonbladet.se

  Someone else who have encountered this problem?

  Update;
  Found an incompatibility between Vista and my router DLINK-804 for dns lookups. Now I wonder just if Vista or DLINK is correct. Problem solved.

  KR,
  Björn? A¶RN Hasselberg

  Post edited by: bhasselberg

  > Found an incompatibility between Vista and my router DLINK-804 for dns lookups. Now I wonder just if Vista or DLINK is correct. Problem solved.

  Happy info. Thanks again for this information!

• Vista installation problem: path has no %APPDATA%\

  Whenever I try to install anything, such as MSN Live messenger, Skype, or update the latest version of iTunes, I get an error.

  He now tells me that the installation could not be completed because the path is % APPDATA%\.  I really have no idea what it means.  But he told me the Installer failed because another program blocks.

  My update does not work and I think it's been a while since my computer had any appropriate updates.  I read through many messages forums and tried about everything except to reinstall my operating system that I really want to avoid.

  Please help me with this problem!

  Hello

  Have you tried the utility install cleanup?
  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  It allows to clean the remnants of the most recently installed software. This should help to clear the error message. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• PageMaker 7 Vista installation problems

  I try to install PageMaker 7 in Vista Home Premium, and used to install driver driver Postscript and ODBC as they crash in the middle of the installation. The main program of Pagemaker 7 installed (and has been updated) and Acrobat Distiller and ATM Lite. Any suggestions as to the importance that they are and what is required to install. A second question is what do you do with the second installation disk, it is never asked. Dave138

  H is not supported under Vista. PM 7 is 8 years old now.

• 10g on Vista installation problems.

  Hello, I am a student and I bought a copy of the database to Oracle 10 g Release 1 for Microsoft Windows for a class. When I try to install it on my computer which uses Windows Vista (I think that Home edition) it gives me this message in the cmd prompt:
  
  _____________________
  
  From Oracle Universal Installer...
  
  Verification of the requirements...
  
  Checking the operating system version: must be 4.0, 5.0, 5.1 or 5.2
  real 6.0 has no < < < <
  
  Exit Oracle Universal install, journal for this session are in < location >.
  
  Please press ENTER to exit...
  _____________________
  
  Any advice would be greatly appreciated.
  Thank you
  User10837588

  10gR 1 is not certified for Windows Vista.
  http://download.Oracle.com/docs/HTML/B10130_02/reqs.htm#CHDHGGFE

  Certified for Vista version are gr 10, 2 and 11g.

  You can try 10gR 1 on Win XP Professional or download 10 gr 2.

  http://www.Oracle.com/technology/software/products/database/Oracle10g/htdocs/10203vista.html

  or

  http://eDelivery.Oracle.com