Satellite Pro A300 PSAGDA won't start at all after flash Bios 1.90

Similar Questions

• Satellite Pro A300 PSAGDE re-start when it is plugged

  I've had this laptop stored for awhile that I couldn't work through this problem, but I'll have another chance.

  The laptop is a Satellite Pro A300 PSAGDE.
  The problem I am haiving, is that the laptop might restart whenever I connect the PSU, but not when you use a live CD (Ubuntu).

  Let me try to Flash a BIOS replacement to see if this will fix the problem.
  Unfortunately, the necessary software to Flash the BIOS requires the laptop to be plugged.

  Is there a way around this problem?
  Can I trick the software into thinking it is plugged?
  Is there a way I can return/repair of the BIOS in a different way because obviously the problem has always been there.

  Thank you

  Post edited by: miainphillips

  Post edited by: miainphillips

  Hello

  Sorry mate but I'm afraid I n t m know exactly what the problem is
  You said that you can not boot from a Linux Live CD, but you can install a Windows system on this laptop?

  Why do you think the BIOS is the problem?
  Even if the BIOS is not updated, the laptop should power on correctly and should boot

  Can you explain the problem exactly?

• Satellite Pro A300 PSAGDA: webcam on Win 7 installation problems

  Hi guys,.

  its been a few weeks since the installation of Windows 7, only for the past few days have I took the trouble to install the toshiba software (don't stone me!).

  At the moment I was scratching my head when you install webcam drivers. When the installation is completed and after a reset, all he says is Webcam failed to initialize, please restart cam or computer.

  Restarting the laptop won't

  I'm on a Toshiba Satellite pro A300-PSAGDA-01C00R, these drivers just doesn't at the moment on 7?

  any help would be great, thanks!

  Hello

  I installed THIS version of the driver for the webcam on my Win7 preinstalled Satellite A300 and it works perfectly.

  I tested the software pre-installed and it works well. I also tested it with Skype. No problem at all.
  Test it on your Satellite too.

• Satellite Pro A300 PSAGDE Touch pad and fingerprints fingerprint sensor problem

  I have been runing Windows Vista on my Toshiba Satellite Pro A300 PSAGDE. Because my original Windows Vista key has been blocked I did a system recovery CD Toshiba vith XP. Everything work fine except the fingerprint sensor and the touchpad. Manager access suite said he couldn't connect with equipped and the driver touch pad in the taskbar icon shows but it seems to be inactive. The touchpad does not work even though I have pres FN + F9.

  What should I do to save this problem.

  Sory for my bad English, I just form Slovenia, I hope you understand.

  Somehow the material is not properly recognized.
  It will be interesting to see if the fingerprint sensor and touchpad may work with Vista preinstalled originally.
  I think that Alex is right. Contact the nearest Toshiba service provider and ask for help. They should check the functionality of the hardware.

• XP for Satellite Pro A300 PSAGDE drivers

  Hi all

  I installed a new copy of XP on a Satellite Pro A300. I'm looking for all the XP drivers for this machine. I found some drivers on the Toshiba site (LAN, audio), but Device Manager has the following list of devices without drivers

  base system device
  base system device
  wbase system device
  network controller
  unknown device
  video controller (VGA Compatible)

  Where can I download the drivers to fix this? Toshiba have a driver package that can be downloaded which provides all the drivers? Or I have to download generic drivers?

  Thanks in advance,
  MM

  I found a lot of drivers for Satellite Pro A300 on the site of Toshiba for Windows XP.

  You searched for where the drivers?

  I found the drivers for the network controller chipset.

  Look at [http://eu.computers.toshiba-europe.com] and you'll find it, too.

• Satellite Pro A300 he can't start WLan - Fn + F8 key problem

  Hello

  I have a wireless satellite pro a300-1nt model problem... I have instaled win7 ultimate (32 bit) and and all the Nice work, except that... in the household of wireless device is all ok, windows recognizes the card, he said all work perfectly... but when I try to start it, nothing happens. When I try to solve the problems they say "WiFi is disabled" and something like "Use the power switch on the front of the computer, or the function keys, if necessary activate wireless", but when I use Fn + f8 nothing happens...

  Now I don't know what the problem... don't know what to do... windows recognizes the card, but I can't start with buttons: (...) I have try all the drivers that I can find but nothing, if someone have similar problem or know something useful, please share... :(

  Thank you
  Aleksandar

  PS Sorry for the bad English

  Hello

  You have installed Win 7 but you didn t install some tools that controls the FN keys!

  You need to install the support card Flash Utility and added value package!
  You can find that both page European driver Toshiba Satellite L500 download area!

  PS: I think you should also check the BIOS settings. Some BIOS contains an option to toggle the wifi.

  In addition, go to-> properties Device Manager card Wlan-> Advanced tab
  Here, you can activate Wlan card too!

• Satellite Pro A300 PSAGDA-02000R CPU and graphics chipset mismatch

  can someone help me with the specifications of this laptop.

  When I look at the official brochure of toshiba for this product, he mentions that the Chipset of the CPU

  "Mobile Intel 965 PM Express Chipset.

  but the second video card says

  "Intel Graphics Media Accelerator GM45.

  Which is true, because what I read on the site of intel GMA X 3100 is used on the mobile 965 PM Express Chipset.

  Any help will be much appreciated.

  To be honest, this unit is not known to me, but I know that some other Satellite Pro A300 supports other chipsets.
  For example:

  SATELLITE PRO A300 PSAJ1E-005008BT supports the Intel GM965 chipset and graphics chip Intel GM965
  SATELLITE PRO A300 PSAJ5E - 001001GR is supported by the chipset Intel PM965 and ATI Mobility Radeon HD 3470
  SATELLITE PRO A300-1E7 PSAGDE-003003EN supports the Intel PM45 Express and ATI Mobility Radeon HD 3470 Mobile Chipset
  SATELLITE PRO A300-1HF PSAG1E-00K00SIT supports Intel GM965 and Intel GM965 graphics chip as well.
  SATELLITE PRO A300-21 b PSAGDE-01S007A3 supports the Chipset Mobile Intel GM45 Express and ATI Mobility Radeon HD 3470.

  As you can see there are many different laptops with hardware components completely different models
  I googled too, and it seems that the PSAGDA Satellite Pro A300-02000R supports the PM of Mobile Intel 965 Express chipset and graphics ATI Mobility Radion, HD 3650 with 512 MB + Intel Graphics Media Accelerator GM45.

• Satellite Pro A300 - driver Webcam cannot start under Win 7

  Recently bought a satellite Pro A300 and immediately updated from Vista to Win7 Pro Bus.
  Do not use webcam before upgrade.

  After upgrade, after downloading and installing the Toshiba Chicony webcam software, continually get message "Webcam driver open fail." "Please restart camera or computer.
  Camera appears in Device Manager and says driver is a Microsoft 6.1.7600.16385 driver v dated 06/21/06 (very pre-Win7!).

  Have you tried unistalling/reinstalling software camera assistant with and without first uninstalling the program camera in Device Manager, but the same error message comes back every time. I would appreciate suggestions for a fix.

  Hello

  In your case, I would try to install the latest driver for the webcam of Toshiba. Install this driver and try again. Also, make sure that this latest version of the BIOS is installed for your laptop.

  In addition, it would be interesting to know if the same problem happens on Vista. You should try it with the factory settings. So that you can identify if it s a hardware or software problem.

• Re: Satellite Pro A300-PSAGDE - cannot find 64-bit of Windows XP drivers

  I need drivers for Windows XP 64 bit for fingerprint, card reader, modem...

  Can someone help me please?

  Thank you

  Hello

  Unfortunately your laptop model is not supported for 64-bit version.
  I don't know if it will work, but you can try to use the drivers for other satellites or Satellite Pro A300.

  Test it.

• Satellite Pro 2100 won't start at all - LED flash

  My SP2100 began to have feeding problems and now won't start at all. The AC adapter green LED is lit, that are relevant lights on the body of the laptop (although the "battery charge" light always orange these days). When I try the switch on, startup begins (in fact succeeded on occasion until this morning), however the battery indicator and the adapter lights are flashing, and everything stops again.

  On the rare occasions when I'll be past this stage, lights blinking, and the system soon shuts down again with a screen message "low battery." Until this morning, he would sometimes settle, the computer remained on, and the lights showed a State of equilibrium as usual.

  Initially I thought that the problem was of course the battery or the AC adapter, but now I'm starting to think that it is with internal PSU of the laptop (although I suspect the battery is probably tour after all this part of loading and unloading).

  Any ideas?

  Hello

  I think you're right. Flashing LEDS are a sign that hardware is defective.
  I can't say what exactly is the problem, this should be verified by a technicain.
  On the other side I don't know if it's worth to repair such an old machine.

  Good bye

• Satellite Pro A100-080 does not start - stays dark after 3 beeps

  Hello
  After a week off, the Toshiba Satellite Pro A100-080 (PSAASE-00G004GR, 4 GB RAM) of my kids start not anymore.
  When turn on/off the system, he * will beep 3 times * (one long, two short beeps), the HDisk light flashes 'blue' and then nothing more. A/c and battery power LED are 'blue', which seem to be OK status.
  No other useful help, as the screen remains dark.

  We had upgraded to 4 GB MEM (Kingston) a year ago and I already tried the old used 1 GB (included with purchase) or the replacement of 2 x 1 GB since December 2007, but equal status with these modules. This is not
  a defect of memory.

  I hope that this is not the motherboard, probably only the NVIDIA GeForce Go 7600 graphics included adapter?
  Does anyone have an idea what could be the problem?

  Thx for a short help.

  Hello

  Generally this type of beep codes are hardware related or with other words, hardware is defective. So I think it's a hardware problem and an ASP must check your laptop computer to identify the cause of this.

  On the Toshiba site, you will find a list of aspic:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

• Satellite Pro U300: No connection to the local network after updating BIOS 5.00 - WIN (Vista32)

  Hello!

  After the bios update newest to my Satellite Pro U300 (PSU31E) Lan Realtek adapter not working anymore. The map shows in Device Manager, but if I connect a cable, nothing happens (it says no cable connected).

  ipconfig-all says:

  Adapter Ethernet LAN connection:

  Medienstatus...: En medium (disconnected)
  Suffix-Verbindungsspezifisches DNS:
  Description...: Realtek RTL8101 Family PCI - E Fast Ethernet NIC (NDIS 6.0)
  Physical address: 00-1B-24-98-D7-AA
  DHCP aktiviert...: Ja
  Autokonfiguration aktiviert...: Ja

  Thanks for your advice!

  Hello

  In your case I would uninstall the Realtek LAN driver.
  Can I visit the Realtek and download and reinstall the latest LAN driver.

  In addition, in the DOS command window, you can try to run this command:
  * Ipconfig / renew *.

  PS: Try to also set the default BIOS too.

  Concerning

• Satellite Pro A300 PSAGDE - Vista WLan driver

  My local wireless network does not work.
  In the Device Manager in the "other devices" section, it shows network controller has no drivers - installed several without success.

  Any ideas where I can find the correct one (Vista Biz operating system)?

  Thank you

  Hello

  As far as I know the laptop must be equipped with internal Intel WLan card.
  So usually the Intel WLan driver downloaded from the Toshiba WLan portal should help you.

  http://APS2.toshiba-tro.de/WLAN/

  Choose: Intel PRO/Wireless 3945, 4965, 5100, 5300

• Satellite Pro A300 PSAGDA-02000R, driver missing in Windows 7

  After a clean install of Windows 7 Ultimate, I met a pilot that I can't know what it is.
  As far as I know on this topic is on system compatible ACPI Microsoft and also the path of the device instance is ACPI\TOS6205\2 & DABA3FF & 1
  Any ideas?

  I think you're missing the Bluetooth device.
  Download and install the last stack of BT Bluetooth Toshiba EMEA Information Center.
  http://APS2.toshiba-tro.de/Bluetooth/

  Good bye

• Re: Satellite A100-803 PSAANE won't start no-glued on the Bios POST

  Hello

  I have the following problem with a laptop computer to a customer.
  After having turned it on, it has the logo Toshiba rest on and everything is hanging there.

  After pressing ESC, there is a message: "NO TPN or TPN has problem.
  So, I think that the Bios broke down. How, I don't know.

  Trying to enter in the setup by pressing F2 system displays "enter the configuration" but nothing happens. He stayus on this screen.
  Is there a solution I can try to recover the Bios damaged from a USB or a USB floppy drive.

  I checked the Toshiba support site, there is a Bios Update, but it is a program that should be started in Windows so I can't use it.
  Anyone have an idea how I can recover the corrupted Bios.
  I have already removed the battery and the power and hold the powerbutton to for +-30 sec, but that does not solve the problem.

  Thanks for help out me.

  Best regards

  Cauberghe Didier
  Dealer.

  Hello

  You are right. There are, it's no BIOS which can be not started BOF on floppy or USB key.
  You must update the BISO running windows OS.
  But according to your message, it is not possible.

  If you have no alternative but to contact the maintainer authorized Toshiba in your country.
  Guys should be able to help you. I presume that the technicians have access to the traditional BIOS version that can be updated using a disk.

  Good