Satellite Pro L10: CMOS clock stops when the OS is not running

Similar Questions

• Satellite Pro L10-> I want to increase the memory

  I have a Satellite Pro L10 and want to increase memory. The manual accompanying it refers to "Chapter 7, unfortunately there is no chapter 7, annex just."

  Could you please tell me if I need specific to a type of memory card and also let me know what I need to do to install it because I've never done anything like this before.

  Thank you very much in advance
  Allan Robson

  Hello

  You must simply 200-pin PC2700 modules SODIMM (333 Mhz) DDR.
  You can increase memory up to 1024MB. So, you can use modules of 2 x 512 MB max

  You can also take a look at this page:

  Toshiba Satellite Pro L10 - 118 memory

  I hope it's interesting and useful

• do not display menu when the program is not running

  Hi, I did with an XControl I can start the program with a start button.
  I deselected the toolbar, Run and Abort button when runnning and the program runs with only a custom Menu, just like I want.
  When the program stops the menu and the toolbar is visible (as usual). My question is - can you choose not to show the menu and the toolbar when the program does NOT work?

  During execution of the edit mode, it seems reasonable to return to editing mode later.

  Once the program is distributed to end users, edit mode is meaningless. Built in a standalone application or at least to define its 'open operation' and close once. The program should never be in a stopped state. Create a state machine passing the State idle when it's not what anyone.

• How to find vCenter virtual cluster large when the services are not running?

  Does anyone have advice for locating vCenter in a cluster, when his services are not running?

  For example, I have to restart vCenter and its network is having issues.  I need to go to the host ESX (i) is on and open the console to get to the virtual machine.  But to find that host is on can sometimes take a long time, because I have to log in to each HOST and see if it is the host where vCenter.

  Does anyone have any advice or suggestions to make this process easier?  It is not so important, but just curious to know what others might suggest.

  Thank you.

  I used PowerCLI and

  to connect-viserver esx1, esx2, esx3

  connect to all the ESX(I) hosts and then run

  Get - vm vCenterServerName | Select the name, the host

• Satellite Pro M70 usually power up when the AC

  Hello

  I bought my dad a Satellite Pro M70 for his birthday and it was used for about 3 months. All of a sudden without any reason that it not power up if it is not connected to the AC. The battery registers itself as 100% charged.

  When on AC, everything is fine no problem.

  But when it is not plugged into the AC, it lights. When put under tension however you can unplug the AC and it will all work very well again.

  Any ideas?

  Should I try a BIOS update? or does anyone have any other suggestions?

  Thank you
  Martine

  Hello

  This problem appears at the beginning?
  Sounds a bit like electroninc power supply malfunction and in this case, you should always ask the service provider to Toshiba for assistance.
  Don t worry, seems, the guarantee is valid and each procedure must be done for free.

  But I m interesting if this will help you:
  Please, try to disable powerplay in the properties of the graphics card and do not set the CPU at low speed in Toshiba Power Saver mode fixed.
  Check this option.

• Satellite Pro U400-247 - noise static when the AC adapter is plugged

  Hello

  I got by Satellite Pro U400-247 and you have a problem with the sound.

  Everytime I plugg in adapter (external power supply) there is a kind of droning noise static noise when I use the audio out (headphones).

  Does anyone have a solution for this problem?

  Thank you
  Marcus

  Hello

  I guess that's not happed running the laptop on battery only. Right?

  I think that this issue is released to a grounding problem.
  I read different forums on this kind of question it.
  Usually use the 3 cord power cable should help get rid you of this noise.

  In your case I would recommend asking for cord 3 power cable (maybe you need another adapter that supports the 3-wire power cord) to a Toshiba authorized maintainer.

• Satellite A30-203: never cooling stops when the adapter is plugged

  Hello everyone,

  I'm using satellites SA30-203. In recent days, main fan of my computer ceases when the adapter is plugged. When operating with the battery, the main fan is sometimes - normally - stop.
  I'm not working only not with software that it takes a lot of CPU. So, what could be the problem?

  Kind regards
  Tunc

  Hi Tunc

  In my opinion the activity of the CPU is not affected only by the software you use, but all activities. Many of these activities work constantly in the background and the works of CPU. Please don t forget that the processor is not the only source that produces a lot of heat. The graphics card is also responsible for the heat.

  As you know all the hardware components are placed side by side and it needs to be cooled correctly. On my Qosmio F20 cooling fan starts to run even if the download of some files is active.

  Believe me that there is no problem. You have a device of high technology with the latest hardware components and the unit must be cooled properly. I can recommend you to change method of cooling in electricity from the night before and put it in silent mode.

  Good luck!

• Satellite Pro A200 (PSAE4E) - power off when the AC adapter is connected

  I bought this laptop for my wife about 2 years, since about 6 months ago, that the laptop was randomly shut off without warning, this only seems to happen while the power supply is connected as well.

  I have read several other posts on other sites with people having similar problems.

  There are various suggested corrections, you must disable the duel core in the bios so that it works only on one heart and he spend dynamic low for fans. I did this about 2 hours ago and touchwood not a single switch off again. This however is not an acceptable solution, there is obviously much more slowly.

  Another suggestion has been updated the bios, I downloaded it now but am very worried to run it, this laptop can stop at any moment, lasting from a few minutes to a few hours. If it stops while updating to bios, I doubt that it would be good news. I don't want to make it work on the single core for the rest of the day/night to see if its stable and then go for it.

  Before that, can I make a call to the toshiba helpline, I read on the forums that this is as well a defect of design within the laptop and there's a reminder of some of the laptops in the Canada, I do not know how it rings true but still a concern to read and might be unacceptable to the owners of the A200.

  Others have advised that it is an overheating problem, it's that I reject, I running SpeedFan and showing a stable 47 temp and it allows to switch off the coast immediately when turned on, yes it could be due to dust build up, something I checked and cleared, it did not a difference for the frequent switch offs.

  Im not too well why it is only when the power supply is connected, I have not tried a different PSU, but those who have had the same problem try this and it has not solved the problem.

  When I unplug my power as well the battery seems last mabye 5 minutes at the most.

  Overall, Im very unhappy all this, toshiba is a brand of 'high' where you expect better quality and pay for it.

  If anyone has any suggestions please let me know, would be also good to hear talk of toshiba support on the issue.

  Concerning
  Florence

  Hmmmmm... interesting.

• Satellite Pro L10 won't boot to the top

  I am a L10 for a friend, at the moment when the cd and turn it on, the snoring of fan upward, the disk hard led flashes several times climb the towers, but nothing beyond what is happening. The display shows life, no beeps comes off it is just here doing nothing with the power light on and whirring of the fan.

  So far I tried to connect a monitor to the vga no signal of the port. Put a linux boot cd in the drive, it runs and sounds like its access but I don't think that his startup, the screen is certainly not, and the hard drive is silent. Finally I tried to take the battery out and running of the network. It doesn't change anything.

  So for the moment I can not any diagnosis and I have no idea what could be wrong with him, anyone have any ideas?

  Hello

  As you have described it of very difficult to say what's wrong.
  It seems like it might really be something wrong with the hardware because you can not see the home screen Toshiba at the beginning of the initialization.

  I put t don't know if this helps but try to remove the battery to form several times unplug and wait 30 min power (can t tell the time exactly) try to reinsert the battery and connect to the mains. Try to start again.

  If it doesn't help I guess you will need additional assistance of a technician.

• Lost drivers for Satellite Pro L10 etc - where to get the software?

  I had to reinstall windows xp on my Satellite Pro and have managed to install drivers etc for evrything but the WiFi. Device Manager displays an error of the pilot against Ethernet controller and although the Wifi light is on it does not appear anywhere even in the taskbar.

  Where and what software do I need to download it please?

  Thank you very much

  Hello

  On the Toshiba driver page, you will find all the drivers!
  I checked the page and found different utilities Wireless LAN!
  Please check you card making WLan. Especially the Wlan type has been mentioned on the label at the bottom of the unit.

  I think that the correct driver is the key!

• Satellite Pro A30: after disk HARD replacing the BIOS does not see DVD or HARD disk

  Hello

  I bought a new Pro A30 of Satellite earlier.
  Shortly after, I noticed the system sometimes
  would freeze, with a rattling of the HD.
  A reboot cold was the only solution.
  I was told to replace the HD I did but the
  problem persisted with the new HD.

  I tried a known working HD and the problem still persisted.
  At this point, the warranty period has increased.
  Frost started happening more regularly, and
  now, the BIOS does not recognize the HD player or DVD.
  It starts and then try to boot from the network,
  because he doesn't have a HD or DVD player.

  At this point, I think I need a new system board.
  Someone at - it other advice or seen this problem
  before?

  Thank you
  Ray

  Hello

  What happens if you remove the CD/DVD drive or the HARD drive?
  The laptop recognizes one of these devices?
  Have you used the devices recommended by Toshiba?

  in any case, this seems very strange and the dysfunction of the motherboard is not impossible

• Sound stops when the window is not active

  I have an above (VO) voice that reads the text on a screen. As the VO happens at certain points (cuepoints) more text appears. I have a glossary of popup (dialogMIAW) that appears when the user clicks on a word in the text. So far so good. If the user clicks on a Word and the glossary opens the text continues and cuepoints are points are achieved more text appears. In other words, the program continues - which is what I want. BUT when you click on a button in the glossary of close, sounds and text stop - this is not what I want. I don't know why this happens because in this glossary MIAW are word hyperlink that the user can also click on that open upward more Windows Glossary - just like I want. It's the close button which seems to stop the sound and inturn the text (as a cuepoint is no longer reachable). This could be the cause and how can I make the noise from the stadium to continue even if the user clicks the close button?

  This is a known issue: <> http://www.adobe.com/go/tn_14717 >

• Satellite Pro P300-276: switch WLan on the front does not work

  Hello.

  I have a problem with my laptop and would like to receive help or ideas. The switch to forward wireless network adapter does not work.

  It works when I push it to the right and keep pushing it. Then light work, he finds the network, and the convenience store told me that everything is working well. When I let go, the light turns off, it can't find the network and the convenience store tells me that I have to put on the wireless network adapter.

  I suspect that it is a physical problem and I need to get the machine repaired. But if someone has a quick easy solution or a recommendation, then I would like.

  I'm online now using an ethernet cable (via a powerline adapter, which I tend to use anyway). Furthermore, the laptop is great and I love the big screen.

  Thanks in advance,

  Matthew

  Yes, in my opinion, his mechanical problem in something wrong with the switch may be a loser contact

  I think that the one and only one solution: laptop must be disassembled and the switch needs to be replaced

  But it is not easy and to be honest I advise to use a dongle USB external WiFi instead of paying lots of money to get this replaced change.

• Screen of the blackBerry Smartphone is no longer automatically stop when the phone is not used

  I have a Verizon 8830.  I have the side switch programmed to lock the device.  In the past, when I blocked the device, the screen would turn off after 2 seconds, which would save battery.  Now, when I lock it, the display turns off after two seconds but then it turns back on.

  I can get it to decrease intensity with backlight settings, but I can't have to go completely dark.  As far as I know, I have not changed any settings.

  Any ideas?

  It fixed the old-fashioned way... I did a hard reset.  It works again.

• Satellite Pro M70: upgrade graphics card and the disk is not in 'my computer '.

  Hello

  I have the M70. and is it possible that I can up grade the grafix chip? becuse I like to play games on the move... and im at the end of half-life 2 and also it keeps Freezin' and its very slow! -anyyone help with this?

  and

  I have no hard drive... I go to 'My computer' and its only one hard drive and emulation 2 readers... im another lack... could I have help please [screenshot attached!] - "http://i18.photobucket.com/albums/b140/noodle666/NoDiskDrive.jpg".

  Thank you

  Hello

  1.) No, it is not possible to update the graphics card.

  2.) you have installed several other applications (disk emulation software) which may have a negative influence on the player display. But I found some info that might help you:
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;320553