Satellite Pro L500 used to cranking up what I type

Similar Questions

• Re: Satellite Pro L500-196: what drivers for Windows XP

  Hi all!

  I just bought a satellite Pro L500-196 that comes with installed Windows7.

  However for the use of the older software I need for my work, I want to install Windows XP from my old laptop.
  I want to configure a dual-boot environment, so I use Win7 for most of the time, but be able to boot XP, whenever I need to.

  The support page for this model lists 96 drivers for Windows XP for this model.
  Which of these drivers do I need?
  And there at - it instructions in the order in which to install them? Or can I download/order a cd (or cd-image) with all the drivers for Windows XP

  As far as I know, after you install Windows XP on a second partition, I need a DVD of Windows7 installation to fix the boot manager.
  Otherwise WinXP sill only start.
  My laptop came without such a DVD, there is just a recovery partition.
  Is it possible to use recovery system to make Win7 start again or do I really need a DVD of Win7?

  Thanks in advance,
  Jürgen from Germany

  > The support page for this model lists 96 drivers for Windows XP for this model.
  > Which of these drivers do I need?
  There is no required special installation order
  But I would start with common as drivers:
  Display driver, driver LAN, Wlan driver, Modem driver, card reader controller, driver for the touchpad, etc..

  The driver control must be installed before the controls (utility).
  Try it simply.

  > As far as I know, after you install Windows XP on a second partition, I need a DVD of Windows7 installation to fix the boot manager.
  This is right. I had the same problem with Vista and the boot Vista DVD to repair the Vista Boot Manager

  > Is it possible to use recovery system to make Win7 start again or do I really need a DVD of Win7?
  Not because it s not the same thing.
  The recovery image will format the HARD drive and partitions and will delete the installed Win XP.

• Missing drivers for my Satellite Pro L500

  My Satellite Pro L500 plays! Device Manager tells me I have problems (where I write on a different laptop).

  I will list what are the problems, and I hope someone can tell me that I might need drivers.

  (a) PTL Realtek 8101 Family PCI - E Fast Ethernet NIC (DDIS60). He asks for the installation disc. I don't have one with the laptop, I don't have a restore disc, I did. Will it be OK?
  (b) SM-Buscontroller (code 28) no driver
  (c) not configured correctly (code 1) Controller network.

  These words are just as they appear when I click the yellow triangle.
  Can someone help me solve the problem?

  All the missing drivers, you can download at Toshiba download page - http://www.toshiba.eu/innovation/download_drivers_bios.jsp
  Please check and install all the missing drivers. If you still need help, you are prompted.

  Restore disc can't be used because the use of the disc, you can reinstall the whole OS only. It is not possible to use it for some drivers to install.

• Satellite Pro L500 - Webcam stopped working

  The Web camera integrated on my Satellite Pro L500 stopped working with the following message:
  C:\Program Files (x 86) \Toshiba\Toshiba Web Camera Application\TWebCamera.exe

  The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe for more details.
  The event log points to microsoft.vc80.openMP.

  Could someone tell me please how to fix the web camera. I use it very rarely, so I don't know exactly when it has stopped working.
  Thank you.

  Hey,.

  What do you think about reinstalling the webcam software? Maybe it will work

  Please see the Toshiba driver download page:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Just search your laptop model and the available downloads. If you find it, download the new Camera Assistant Software but before you install it, first remove the old version and restart your computer.

• Re: Satellite Pro L500 - eSATA connect to the HARD 3 "5 Seagate SATA internal drive

  Hi all
  I have extracted a desk ST3500830AS SATA hard drive.
  This HARD drive has both a SATA and a single POWER connectors.
  SATA connector has 7 POWER connector has 15 pins.
  What cable to connect the HARD drive on my Satellite Pro L500 eSATA port.

  [URL] http://www.eprice.it/cavi-vari-assemblaggio-MANHATTAN/d-4122748?metb=ATG_pcat [URL]

  Thank you
  Giovanni

  Use google and search for 3.5 "SATA to ESATA External Hard drive Caddy

  You will get many hits

• Satellite Pro L500 does not burn DVD

  I have TWO laptops Satellite Pro L500 with a TSSTCorp TS-L633C DVD - RW. BOTH have the same problem - burn a DVD fails during the finalization process, regardless of how fast you burn at.

  Burn the CD works fine.

  Burn fine blank DVDs on a laptop Satellite L500D using the HL-DT-ST DVDRAM GT20N drive, as well as on an another Satellite Pro L500 which is to use a Pioneer drive.

  Two laptop computers with problems are ongoing running Windows 7 Home Premium 64 bit, but nothing else than the software that came with the laptop. Both are new straight out of the box. Driver is the current version driver, from what I can find.

  Any suggestions? When a laptop has shown problems, I thought that maybe it's the reader, but now 2 notebooks of totally different stores showing exactly the same problem?

  Thank you.

  Hello

  Have you tried burning programs such as Nero, Ashampoo Burning Studio? Check this box and we post

• On the Satellite Pro L500 - 1 6 vibrating screen

  I have a Satellite Pro L500 - 1 6, operting system is windows 7.
  Since I bought the laptop I've known vibration of the screen.
  The problem is more acute when I'm running java on firefox and then open a program like Outlook and try to use the drop-down list box to select a contact.
  When I do this, the Outlook screen vibrates madly and it is impossible to stop unless I close the program firefox.
  There are occasions when this happens without firefox being open.

  The graphics card is an ATI Mobility Radeon HD 4600 Series
  I'm on version 8.634.1.0 driver.

  I tried to upgrade the display driver via the ATI Web site, but it cannot be updated because it requires a driver of Toshiba and one on my machine is the most recent available.

  I disabled the Aero Glass effects, but it did not work.

  If anyone can help?

  Hello

  > I tried to upgrade the display driver via the ATI Web site, but it cannot be updated because it requires a driver of Toshiba and one on my machine is the most recent available.

  The Ati drivers are not pre-tested by Toshiba and do not have protection against overheating. Thus, it is not recommended even trying to install.

  > When I do this, the Outlook screen vibrates madly and it is impossible to stop unless I close the firefox program

  Have you tried updating the version of Firefox or switch to opera?

  It is a bit difficult, say what is happening to your laptop, but it seems that the software related problems. I do not own satellite Pro L500, let's wait what others may suggest

• Can Satellite Pro L500-1 - I upgrade graphics card?

  I have a Satellite Pro L500-1 and would like to know if I can pass the (now an ATI Mobility Radeon HD 4600 1024 MB) graphics card at least 2 GB one.

  Is this possible and what model is proposed?
  Thank you very much

  Alex

  This has been discussed several times here in the forum and no, the replacement of the GPU / isn t possible upgrade.

• No way to disable the touchpad on my Satellite Pro L500

  I could not turn off my touchpad with Fn + F9 keys.
  My Satellite Pro L500 is equipped with Windows XP Pro and I use a Logitech wireless mouse. I didn't even touch my touchpad for my cursor jumping around.

  If I can't find an answer, the only alternative I have is to cut off my thumbs.
  Any help out there?

  Hello

  Have you tried to disable the touchpad in the mouse Properties?

• Need to replace battery for Satellite Pro L500

  Hello, someone Koe the PN or battery type
  of my PSLS4E Satellite Pro L500-00C00HIT?

  Thank you

  Remove the battery and on the label of the battery you will find the part number.
  New battery for order by using the part number and you will be the right one.

  Can find you it?

• Satellite Pro L500: Dynadock U - problem with graphics card driver

  Hello.

  I have a TOSHIBA Satellite Pro L500 PSLSAA-00K00U running Windows 7.

  I just installed a Toshiba Dynadock u after I restarted and connected, I recevive the error:

  Warning

  The Catalyst Control Center is not supported by the version of the driver for your compatible graphics card.
  If it please your ATI graphics updated driver, or enable your ATI card using the display manager.

  I downloaded the latest display drivers ATI on Toshiba website for this model of laptop, but the dirver installer said that the latest drivers are already installed.

  Is there something I need to do to prevent this recurring error?

  Thank you

  Steve

  Hi mate

  I think you need to reinstall or update the Dynadock U Software.
  Visit the page of European driver of Toshiba and searching:
  Options-> connectivity-> Dokcs & ports-> Dynadock U10 replicators

  Then you will get Dynadock Utility for different OS. The latest version of the software is v2.1.4.7.

• Satellite Pro L500 - no license for Toshiba Bluetooth Stack

  Hope someone can help me. I'm going along in circles.

  November 8, 2010 I bought online at Toshiba Toshiba Bluetooth Stack (Premium Edition) for my Toshiba Satellite Pro L500 so that I could use my dongle (non-Toshiba) existing. It works well until a few months ago.

  Thinking that the dongle was packed that I bought another one.
  However, even though I know that it is not working I could not make it work on my Toshiba laptop I get the error after the Toshiba Bluetooth stack as follows:

  "Thank you for the evaluation of battery Bluetooth for Windows by Toshiba. The evaluation period is now expired. You can purchase a license for this version of Bluetooth Stack for Windows by Toshiba. "

  This seems to involve I came at the end of a free trial period but I did not because I bought the full license in 2010. I tried various things, but I can't go beyond that. I'm not a computer boffin, but I can reasonably find my way around a laptop. Can someone please, please help me?

  Post edited by: Jeannie

  Hello

  Have you tried to reinstall the battery Bluetooth using once more the license provided by Toshiba?

• Satellite Pro L500 - F3 - F200 - 0002 ERROR at STARTUP

  Hello

  Last night I went to reformat my laptop, to halfway through I thought no I won't do this more then I clicked Cancel. Now whenever I try to turn on my laptop, it just gives me the ERROR saying F3-F200-0002 and won't start. I tried pressing F8 at startup, but there is no option for recovery or repair in the menu mode just safe mode debugging etc.

  I was looking at forums and discovered I should press 0 constantly while the laptop boot and it will bring up recovery Wizard. Anyway, when I do this it says HARD drive recovery mode, then said Windows is loading files, then it goes to a page saying ERROR F3-FF00-0006.

  I was told to download this file (http://209.167.114.38/support/techsupport/tsbs/all/-TSB001522.htm) but I don't know how to run it on my laptop which is broken (I'm on my computer of nans for the moment). I tried to put it on a USB key and mortising the USB in, but it won't work.

  I need urgent assistance that I use my laptop for my work (I work from home, using laptop computer). We have a lot to say if you could help me fix it at home, I have no money at the moment to be able to get a recovery disk or send the computer for professionals to fix store.

  P.S. I'm on Windows7 and my laptop is a Toshiba Satellite Pro L500.

  As I know the installation of recovery should not be interrupted. If you do you not have access to the wizard of recovery more. Now, all you can do is install image recovery using recovery DVDs.

  If you have created a? Otherwise you can order under https://backupmedia.toshiba.eu/landing.aspx

  Otherwise that you can try to install the version of the OS if you have the original installation disc for Microsoft.
  You know, now the situation is quite complicated.

  By the way: in another ad with the description of the similar problem some people wrote that this error message can be caused by damaged HARD drive. I can't confirm this, but anything is possible.

• Satellite Pro L500 - press Fn key blocks the laptop computer to blue screen

  Hi all
  First post so please ask if I did not include all the necessary information.

  I have the Satellite Pro L500-1TX (Win 7 32 bit os) and everything worked fine including the Fn menu drop-down button.

  Now, whenever I press the Fn key, it blocks the laptop to a blue screen. The computer then restarts automatically and that it was an unplanned shutdown offers the usual safe mode option.

  Unfortunately, I do not know when this started as I do not use the fn often hesitate so just do a system restore. I don't know how far back to go. It was several weeks before I associated accidents hit the Fn key.

  Any suggestions as to which Toshiba drivers may need to be reinstalled. The computer otherwise works fine.

  Cheers in advance
  MTV

  Great! Thanks for this feedback that I also found other threads about Support Flash Card utility and it is the tool command keys FN so read the forum in other threads contributes without doubt! ;)

• Satellite Pro L500 - 19 X boots ok but keyboard and touchpad are unable

  Satellite Pro L500 - 19 X running on windows 7.

  The machine boots ok, then on the connection or the work of touchpad or keyboard screen.
  The only way I can solve this problem is to go back to a previous restore point.
  After that, the machine works fine until I power off, on the getting started once again, I have the same problem.

  The machine has applied updates.

  Welcome pointers.

  Kind regards

  C.

  You can use two devices in safe mode or when you enter the BIOS settings?

  If possible, run feature, installation and test of recovery HARD drive with the factory settings.
  I know, it's a more radical method, but the best way to test the operation of the equipment.