Satellite Pro P100 - unable to connect to Internet via LAN

Similar Questions

• Satellite Pro 6100: unable to connect to internet via wireless network

  Have had some problems with the audio device Yamaha for another thread, which now seems to be resolved. Thank you!

  However, do not know why, but now unable to connect to the internet via a wireless network, although the router works well as another computer in the House is connected wireless.

  When you check the available wireless networks it comes up with "no wireless networks were found in range, make sure that your computer's wireless switch is on.
  Where to check it, can anyone help?

  Thank you

  On the left side, there is WLAN switch. Make sure that the switch is in on IT. After doing this using FN + F8 key combination and activate WLAN device.

  After having done that, you should be able to see the WLAN networks available in your area.

• Satellite A215-S7428 unable to connect to internet by LAN cable

  Comes with * ethernet card - however.
  I can't connect to the internet through an ethernet cable. Card is "activated" and "Properties" indicate that it works. I moved the cable from the back of the XP laptop and XP has no problem so I expect no problems.

  The only perceptible config diff between XP and Vista is THAT XP shows "cDHCP enabled" in the IP address box. Vista indicates "automatic configuration only.

  Any thoughts?
  * Realtek RTL8101E PCI_E Family Fast Ethernet NIC (NDIS 6.0).

  Hello

  Vista and XP supports similar settings and general there should be no problems using the LAN card.
  First check to see if the network card driver has been successfully installed! This can be checked in the device-> network cards Manager

  If there is everything ok please access the LAN properties and automatically sets all (TCP/IP, DHCP, etc.) on

  I also recommend checking all security settings. Vista supports the new firewall and security features to lock down access to the internet.
  Should take a look in the options!

  Good luck and best regards

• Unable to connect to Internet via LAN

  Original title: Local network problems.

  HELP - my Pc last time to connect to the Local network; and now; only, I can use the Internet; I can't see the other networked PCs; and use the printer. My firewall is disable and anti virus. I have Ping of Just other Pc I can't see all of the PC; and printer. :(

  Hello

  1 when was the last time it was working fine?

  2. How do you connect to the Internet? Is it a cable or a wireless connection?

  3. do you receive any error messages?

  4 did you a recent software or changes to the material on the computer?

  I suggest you to go through the steps mentioned in the link and the Coachman.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Also check whether or not the network discovery is enabled:

  Enable or disable network discovery

  http://Windows.Microsoft.com/is-is/Windows7/enable-or-disable-network-discovery

  File and printer sharing: frequently asked questions

  http://Windows.Microsoft.com/is-is/Windows7/file-and-printer-sharing-frequently-asked-questions

  Hope this helps and keep us posted.

• Satellite Pro A100 - unable to connect to the internet

  I'm unable to connect new Satellite Pro A100 to my youngest daughter to the internet.
  I have a cable modem Netgear DG834 router that works perfectly with my desktop pc and laptops other two of my daughter.
  I checked all the settings, but to no avail.

  Can anyone suggest anything that could restore the balance of my household!

  How have you tried to connect the laptop to the router?
  A you connect using a LAN cable?

  Are the firewall enabled?

  Please publish more details!

• Satellite Pro L510 - unable to connect to the Internet

  Hi, a newbie on this forum so here goes. I got the "fix Windows 7" virus on my laptop because my virus protection that flows. I downloaded AVG which solved some problems, but still not back to the original values. I reloaded Windows 7, but of course I lost all the software preloaded Toshiba & now cannot connect to the internet (laptop computer purchased through the catch of the day).

  What I need to download software/drivers toshiba etc. to address this problem. Thanks for any input.

  Hello

  > now unable to connect to the internet
  Can you write more than one sentence about your problem?

  Does anyone know how you connect to the Internet via modem, LAN or WLAN? More exactly, what happens if you want to connect, you an error message or probably t can find the router?

  Sorry, but without this information there s no end of discussion

• Satellite Pro 4600 - unable to connect to the wireless network

  Hello, I have a problem with my Satellite pro 4600 model # Ps460C-04NVX
  The problem is with the PA3070U-1MPC wireless adapter
  I see my network in a wireless network with excellent signal, but it does not connect

  I have a fresh install of win xp sp3. I don't have original driver cd.

  Can someone help me please? Thank you

  Hello

  As Akuma suggested you should ensure that you are using the latest driver WLAN on Toshiba website for your laptop.
  I founded your model on Toshiba Canada website: http://support.toshiba.ca

  Your network configuration is not kwon to me, but you should check the TCP/IP settings. If you have DHCP do you get an IP address from the router? You can check this in the start menu > run > cmd > ipconfig/all

  If you use a 3rd party firewall, you must disable.

  Good bye

• Satellite Pro M70: Unable to connect to the WLan with ConfigFree

  Salvation in the Forum.

  I have problems with a satellite Pro M70, about gaining control of wireless connections.

  When I scan with "The Radar" I have ConfigFree for available wireless accesspoints, I get several points available, but it is not able to connect to one of them. I can read their status and see their marker of WEP encryption.

  When I try to connect to one of them, I get a pop-up dialog, that said (translated from Danish) 'suppliers another software is in control of the wireless network card. When you try to configure a connection through the classic way to windows, windows States that "windows is not able to configure this wireless connection - if you have another program to manage wireless connections, you must use it". I guess it refers to ConfigFree...?

  Is the unnamed "other provider" associated Windows or perhaps associated McAfee (Security Suite 2007)?

  If you are familiar with this problem or something like that I'd be please to know.

  Also - where can I enter keys for WEP encryption for my friends in ConfigFree WLAN routers?

  > Trying to make a connection through the classic way to windows, windows States that "windows is not able to configure this wireless connection - if you have another program to manage wireless connections, you must use it". I guess it refers to ConfigFree...?

  It should not be a ConfigFree. According to you, an Intel ProSet utility or a Client Atheros wireless network adapter might be controls the Wlan configuration!

  Please check if one of the two control the WiFi network tools and turn off!

  > where can I enter keys for WEP encryption for my friends in ConfigFree WLAN routers

  You should have three different tabs in the utility Configfree.
  The second device settings provides the list of devices, and you should see the wireless network connection.
  Choose and use the button network connections.
  There you should find some encryption settings!

  Also check the profile settings tab and the option called security settings

• Satellite Pro 6100 - unable to connect to the WLAN router

  Hello

  I brought a 2nd hand Satellite Pro, model version SP6100 (PS610E-029ZV-EN), P4 1.7 Ghz, 512 MB, 30 GB, with Windows 2000 Pro loaded.

  I can't connect to my wireless router. The switch is in the correct position.

  I want to change to XP using the key provided with the new laptop (dual OS) however I can't reformat using a XP disc at the start up or if I use the recovery cd (start with holding C and let go when he works up) it starts but displays 'specification drive not valid' three times and charges Win2000.

  Can someone advise how (or if!) Can I reformat I want?

  Any help will be greatly appreciated.
  See you soon.

  Are you sure that the wireless network adapter has been installed in the laptop?
  Check in Device Manager

  On some series WLan is optional. This means that the WLan card is not installed, but it is possible to install an and, consequently, the laptop contains the WLan switch.

• Satellite Pro C50 "unable to connect" when linking to Netgear WiFi

  WiFi error - could not connect to this network WNAP210 Netgear router.

  Hello

  I have a problem with my computer laptop connection with my router Wifi Netgear router WNAP210 model, when I type the password it says that it is unable to connect or sometimes that the password is incorrect!

  I contacted Netgear, and they suggested changing the name of the router to remove any trait symbols "_" underscore, I made it today but always this annoying message on the cell phone. It does the same thing on my Nokia Lumia 1320!

  I tried deleting found connections and starting from scratch and also changed the name of the router (which displays correctly when you scan for Wifi on the C50).

  Now it starts to get really wound up... Please please help?

  Thank you
  Adam.

  Hello

  You should check the configuration of the WLan router.
  First, you will need to use the same standard WLan (802.11 A/B/G/N) for the wireless network, as well as for the Wlan router.
  In the device-> Waln Manager map properties-> Advanced tab, you can choose the standard Wlan to Wlan card.
  You should also check the settings (WPA/WPA2 AES, TKIP) encryption. Not all standards are supported by each Wlan adapter! So please pay attention to this fact.

  Last but not least, you should also check if these connection problems using various channels (1-11)

• Satellite Pro L650 - unable to connect to the wireless network

  Dear Sir.

  I just bought a SatPro L650 (Intel i5) with welcome window 7 2 weeks and struggled to connect to internet. Each time it gives me the 'Network security Key Mismatch' message. I used the WPA/WEP key found under my Thompson router. Despite the advice to use Cap Lock still does not work. When I connect the router using the (yellow) Ethernet cable for the new laptop, I have no problem with the evaluation of the internet.

  I desperately need help and hope somebody can advice me how to overcome this problem in secular terms step by step (sorry I'm not a savy TI). Or is there a setting that I need to do on both the new laptop, as well as on my desktop (connected to the router).

  Appreciate your advice.

  See you soon,.
  John

  Hey Buddy,

  > "Incompatibility of network security key.
  This would mean the WLAN network isn t correct key.

  If the key on the bottom side of your router doesn t work it seems that you have changed the WLAN key in the past
  In the configuration of the router, you can change the WLAN key and set a new one.

  Check this box!

  By the way: If you can access the Internet through an Ethernet cable, configuration of the router to ISP (Internet Service Provider) is correct and that the problem must be the WLAN configuration.

• Satellite Pro A200 failing to connect with iphone via wifi hotspot

  My apologies if I get some of the jargon wrong, but I'm pretty useless when you want IT emits.

  I have a Satellite Pro A200 and had problems connecting to various wifi connections.
  The computer could see the wifi connection and connect to it, but I wasn't able to connect to the internet.

  The question of the Office was arranged by our IT support guy (security settings on the new router we too complex for my PC or something like that), but he has not been able to solve the problem of not being able to connect to my iphone to use the 'hotspot' via the wifi function.

  Someone there knows a way to solve this, or is it a simple fact of the laptop is too old and really need to update?

  Thanks for any help that anyone is able to give.

  > Someone know a way to fix this or is it a simple fact of the laptop is too old and really need to update?

  This isn't a question of the age of the laptop
  As far as I know not that support all mobile operators
  You should first ask your mobile operator if you can use the tethering service.

  If this would be supported in my mobile operator, then connect the iphone to the laptop first
  So that you have two options: you can use the BT connection (in this case check if computer laptop also supports BT) or via a USB cable that came with the iPhone.

  (PS: as far I know to attach is supported by iOS3.0 and higher)

  After that the iphone was connected to the laptop, you must activate the tethering on iphone.
  Under settings of-> network, you should see the option internet tethering it must be enabled.
  Now you should be able to see that in the Network & Center sharing control panel.

• Unable to connect to internet via WiFi

  Hello

  I am unable to connect WiFi with my laptop. It displays connected to the router but the Red (X) between the router and the network. In the system tray to allow brand yellow exclamatory sign wireless. I am able to connect using my cell phone & macbook pro with WiFi, so there is no problem with the router. When I try to solve the problem using the windows feature, and then he said gateway is not available. I can connect to the internet using the cable & I can connect to the Wi Fi on different router but not able to find out why it does not connect with this router Xfinity?

  Here are the details:

  Laptop computer: laptop Compaq Presario CQ58 155SA
  Serial number: [personal information]
  Product number: B6K01EA

  OS: Win 7 64 bit

  Router: Xfinity Comcast

  Please notify. Thanks in advance.

  Thanks & best regards,

  REDA

  Say hello to new raj_sach.

  You have to call Comcast and ask another router.  This model is known to have many questions.

  If you take a look at the job for the router (click here), you can see that it supports up to Windows 7.  This means that all users on Windows 8 will have an update of the firmware (even if you have Windows 7, I wanted to report it).  ARRIS published an update that solves a number of problems with this router - but it will not work on the version you get from Comcast.  This means that Comcast will have to release their own update to solve problems.  You can see on this site on the site of Comcast that this router is known to have problems.

  You can see similar problems in this article and this thread.

  Contact Comcast immediately and ask for a new router.

  Have a great day!

• Satellite Pro A10 - unable to connect to the internet

  I have an old Satellite SPA10 who lost the internet connection a year ago.
  The components in question are:
  Ethernet controller
  Network controller
  Video controller
  Video controller (VGA)
  I tried many attempts to install drivers to replace those already on, but each attempt failed. Toshiba downloads, I used were from the following link:
  NES http://www.Toshiba.co.uk/innovation/download_drivers_bios.jsp?service=UK&mode=allMachi & action = sea...
  I use a desktop computer that is ok, although it has its own flaws and want to return to the use of the Satellite.

  Any suggestions please?
  (With the help of Windows XP)

  Hello

  This old model of laptop is supported for Windows XP Home edition and Windows XP Home edition is not supported by Microsoft more.
  In any case if you want to have good working machine I recommend to do clean install of Windows XP Home edition.
  After doing this you also install all the necessary drivers and tools and utilities.

  This laptop model was offered with Windows XP Home SP1 edition at this time.
  You have Windows XP Home edition installation disc? Is the new installation of Windows XP Home edition an option for you?

  If so, I can help you with this and send you the order of installation exact for the drivers, tools and utilities.

  One last thing: you have the original installation of recovery disc?

• Satellite P100: How to connect to internet via WiFi?

  I read a post above that says that the sticker on the bottom of the laptop ' wireless network: no w/l ' means that there are no installed wireless.
  I'm fairly certain that my Satellite P100 has installed. I customized my phone, ensuring that I have added wireless for the school.

  I have an on-off switch for the wireless on the case. Also, when I entered a zone wireless for the first time, a program (Q-Connect) came.
  I reinstalled Windows XP and wonder if it is a software that is missing (which has been the case with other similar programs audio).

  This could be the operator error?
  I don't know anything wireless.
  How to connect to wireless internet?

  Hello

  First, you must be sure that your laptop has WLan card to 100%. Go to the Device Manager and check the network adapters section. If you will see card WLan (intel or atheros) then you unit definitely has the Wlan card.
  To use the WiFi network, you must configure your Wlan router. Consult the manual.
  You must then activate the Wlan switch on the side of the laptop and use the combination FN + F8 to select the WiFi network.

  For the other steps, you can also check this forum wireless. Here you will find a lot of descriptions.