Satellite R630-141 - connect wireless 5 GHz and channel 44

I just bought a new Netgear N600 Wireless Dual Band Gigabit Router model WDR3700. In theory I can connect either 2.4 GHz or 5 GHz normal connection.

I can connect correctly at 2.4 Ghz, but my Satellite can't seem to see the show of 5 Ghz. I put all settings security WPA2 AES, and as far as I know the Satellite R630-141 support Wireless-N to 5 GHz on this channel.

Any ideas?

Thank you

Hey Buddy,

According to the specifications of the laptop, your laptop has Broadcom BCM94313 WLAN card. With the help of Google to find the specification of this WLAN card I see this card supports the connection 2.4 GHZ only, not 5 GHz.
So why the laptop doesn't see the connection.

But why you need 5 GHz? N project works with 2.4 GHz too :)

Tags: Toshiba

Similar Questions

  • Satellite R630-141 - view becoming over-saturated/bright

    Hello

    I have a portable Satellite R630-141 running Windows 7. During the last two weeks, I noticed that I had the machine will be during the suddenly very too saturated color and very high contrast. This makes it impossible to see some fine lines (e.g. the gray contours stars in gmail disappear completely) and become completely distorted faces and bands of color. Restarting the computer solves the problem. I have the latest drivers for the graphics (8.15.10.2189)

    I was wondering if anyone else had a similar problem and if I should send it the laptop in return?

    Thank you

    Hi cueball,.

    This strange s version the pre-installed Windows 7 in Toshiba or is it your own installation that you are using right now?

    This probably has nothing to do with the display driver that it would be interesting to know what is happening with an external monitor. So if you connect an external monitor, you may notice the same problem or everything is ok?
    ?

  • Satellite R630-141 - Bluescreens after virsus

    I have a Satellite R630-141, which recently began to be planted in a blue screen. This product at random, even when he's not be used and sitting idly. I initially thought it's bourne virus so using zonealarm security suite I ran a scan of the entire depth. I also ran malwarebytes. The two scans are a total of three infections that have been quarantined. This does not resolve the issue.

    My second step was to run the check disk HARD windows and memory check that both have no problems.

    Then, I thought that this may be caused by overheating. Using the Toshiba PC health monitor and a freeware called coretemp I followed the core temperature hovering around 30-40 degrees centigrade and with moderate use that can go up to 60 ° C with gusts thereon to 70 C idling. I don't know if these temperatures are in the correct area, but they seem fine. I ran a CPU and RAM stress test, which has managed to increase the temperature to 90 c without crashing the system, the fan speed is tilted very well thanks to this test.

    before doing a complete restoration or repair, I wanted to ask if this is a known issue on or if you may be able to give a reason for his appearance.

    concerning
    end

    Hi findlay234,

    To be honest, I doubt that the problem is caused due to overheating. If your laptop overheats it would power off immediately or freeze, but I never had a problem with blue screen due to a higher temperature.

    In your case I might make a recovery facility. Maybe the virus deleted some files (registry) important and that s causing the bluescreens.
    You can use the recovery disc HARD reinstall Windows, but don t forget that everything on the first partition (C:\) is removed, so back up your data on another drive.

  • Satellite R630-141, memory compatibility

    I recently purchased Satellite R630-141 laptop and I want to improve it with memory of 4 GB, 6 GB of memory.
    -Do I need to buy originals from Toshiba?
    -Modules of memory are recommended? On web compatible Options, he has enumerated memory module - 4 GB memory PC3 DDR3 (1066 MHz) (PC3-8500) - do I have to take into account any other data when purchasing additional memory?
    -Is it possible to install 4 GB 1333 MHz CL7 side of the original memory module 2GB 1066 MHz CL7?

    Kind regards
    Swear

    It does not need a RAM Toshiba but better to use Rams from Toshiba as Toshiba offer tested high quality modules.
    4 GB of RAM spent number PA3677U-1M4G.

    I also recommend you to buy Kingston RAM. For more information visit the page of Kingston. It's a computer laptop with the same motherboard. Simply choose compatible Rams information.

  • C850 satellite will not connect at 5 GHz WiFi

    My Satellite C850 found network 2.4 GHz Wireless and connected flawlessly. However, it is not 'see' the 5 GHz network, even if the router is in the same room and about 2 meters from the hotel. I have a problem, or in this laptop's wireless adapter will not connect to this speed? Any help appreciated, please

    Hello

    I think that the reason why your portable computer does not see the 5 GHz Wlan is simply.
    The wireless network card does not seem to bear the 5 GHz.
    The WLAN standard 802. 11A supports 5 GHz

    If the wireless network adapter supports 802.11 B / G and N or 802.11 G and N, then only 2.4 Ghz are supported.

  • Satellite C660 - cannot connect wireless to connect to mains

    I can't connect to a wireless connection to connect my laptop, I have a Satellite C660.

    Can you help and tell me how to solve this problem?

    Do you use BONES that you got with your laptop?
    What exactly happens?
    I assume that your laptop can detect WLAN properly, no?

  • Satellite R630-141 - cannot change the boot order

    I have a Toshiba R630-141 and I'm changing the boot order in the Bios, but the Bios does not allow me to choose my cd drive or a USB drive as the startup disk.

    I've updated the Bios today to the latest version, thinking that I need the latest version but still the Bios allows me to change the order.

    The problem is the screen flashes only when I'm in the form of change of boot order. When I select the upper and down arrows to select an option in the box just blinks and does not allow me to select any option.

    I tried the tab key, the number keys basically all of the keys that I on the keyboard, and still, I can't select usb or cd drive so I have to quit and restart.

    Any ideas would be appreciated.

    Hi scarpentier,

    You can change the boot order in the BIOS and booting from another boot device? Go into the BIOS and change the boot order. Enter a startup disk (e. g. Toshiba recovery disc), save & exit the BIOS Setup. The computer will restart and should boot from the CD.

    Check this box!

  • Satellite R630-155 - fan is too loud and SSD update

    I am the owner of a Toshiba Satellite R630-155 (Core i5-480). My problems are:

    1. the fan is too loud and never stops. In normal operation (navigation and General Office work) there is a constant high pitch noise which is audible three to four meters in a desktop - high load environment, you just can't take it anymore! The fan never stops... even when you do nothing...

    2. the heat is a big problem. The bottom of the laptop is overheated constantly and I have to place on my desk so that the lower left corner is outside the table, so it can breathe fresh air from below - otherwise, the temperature rises and the (noisy) fan is unable to follow. When I work with the laptop sitting on a couch, I place a thick book between the laptop and my legs. The book must be thick (more than one inch) with hard covers, otherwise the heat going through the book!

    3. last (but not least, I will mention the biggest problems here) that's the problem with the installation of the SSD. I bought a used Corsair F80 (80 GB SSD) from a friend, but I was unable to use it with the Toshiba - BIOS not detect the disc. I tried to install all the latest updates for portable and SSDS but I had no success. Then I put the disc and I bought a brand new Zalman 128 GB SSD (SSD0128N1 Sandforce) but I had exactly the same problem. I contacted my local support Toshiba and after much conversation, the only answer I got is that the laptop is not compatible with these SSDS, and it is acceptable by Toshiba and not their problem. They told me that if I need an SSD upgrade I cannot go for the Toshiba SSD that is installed on the portege series, which is sold by Toshiba for a ridiculously expensive price - about $500 for 128 GB. I contacted the European support center and I got the same exact answer. I searched the Internet and found someone else with exactly the same problem with a Corsair 128 GB SSD - he concluded that the laptop detects the SSD after ten to twenty resets. I tried and it was true - after a lot of restarts the detected disk Zalman laptop and I was able to successfully install Windows 7, but the process is unacceptable. Also the drive is rated by the sites official at the speed of an OCZ Vertex 2 128 GB (and a little better), but when I ran a cue point in the Toshiba, the results I got were less than half of the advertised speed. Same reference in another machine of the same disc, resulted in the announced speeds.

    Shame for Toshiba...-beautiful design and portability, but all the rest is a big flaw. Their support in non-existent and they do not appreciate their customers. According to me, they stole my money and I will never buy a Toshiba laptop again.

    Sorry for the big message, but I need, I warn potential customers. Can anyone help me with any of these problems? You also have the same problems?

    To follow...

    Hey Buddy,

    With regard to the issue of fan and the heat: you did it BIOS update? A friend told Satellite R630 too and he told me that the fan with the new BIOS version 2.10 activity is reduced. In addition, the laptop is colder than before so I recommend to install this update. You can download the update of the BIOS here:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    But before you start the update of the BIOS, you should consider the following tips:
    -Run update as an administrator only
    -Unzip all files from zip archive before launching the update file
    -Close all running programs as the antivirus and firewall
    -Make sure the battery is fully charged

    With regard to the SSD it s still a little complicated to install 3rd party products and no one can guarantee that these parts would not work. You're always on the side safely with original spare parts from Toshiba.

    All you can do is to install the new firmware for SSDS and hope that it works, but who knows maybe the BIOS update will help you also in this case ;)

  • Satellite L300D - cannot connect wireless Internet

    I just bought a Toshiba Satellite L300D-202 and can, t connect to wireless internet. When I try to connect it only gives me not a wireless option, I only get cable or dial options. We have not seen all the wireless devices.

    When we passed by Toshiba assist/connect/conective doctor and pressed the radar message was peripheral wireless network is disabled please turn on the device.
    The wireless switch is active, the light is orange.
    Our other laptop is fine.

    Can you help me?

    Thanks for this info!

  • Can satellite P300 - I connect to a TV and control?

    Can I connect my Satellite P300 to TV hdmi-cec and control the laptop with the tv remote?

    Hello

    Connecting via HDMI cable should t be a problem. Just buy a high quality cable and connect both devices. With FN + F5, you can switch between monitors.

    Unfortunately I think that it of not possible to control the laptop through TV remote. The TV remote is designed for your TV, not your laptop. ;)

  • Satellite L505 - 10K lose wireless card comes and goes

    Im having a problem with my new Satellite L505 - 10K.

    I lost my internettconnection when I was surfing. So I tried to fix it. The computer did not map.
    Then I rebooted (3 times), is still no map. the key 'FN and F8' was disabel (are not when I press FN)
    I looked in the device under network adapters Manager: only Realtek PCi Lan was which are listed there.
    So for me it looks like not the card has been broken. but when I take the computer to a walk in another House to get help. then the card is back.

    Is this a problem anyone knows?
    To me, it looks like a connection inside the computer problem?

    Hello

    To be honest, I also don t know the reason for this, but first, I would try to update the WLAN driver. You can find it on the Toshiba site.

    Also, make sure that you use the latest version of the BIOS.

    In the worst case there s a hardware problem and you need help, but authorized service I guess that your laptop is under warranty, the repair should be free.

  • Satellite A100-014: connection Wireless D-link router problem

    I think that it is working properly. I keep getting kicked from WLAN (connected to the dlink DWL 900AP), but if I plug the Ethernet cable it works very well.

    This vista software is a major pain. It will let me install the d-link software.

    Does anyone have any knowledge about it?

    If you need the d-link software you must ask the manufacturing of router for these updates or visit the support site for manufacturing.

    What WLan encryption are you using? I used WPA2 and I had similar problems.
    My router and the wireless network card were not 100% compatible with this encryption.

    Now I use the WPA or WEP and it works.

  • My toshiba satellite pro is connected wireless through a 3g dongle but I can't seem to print on my epson BX600FW printer despite the use of the ad-hoc method

    I am really struggling to connect and print wireless. I rang EPSON who suggested that I connected using the AD-HOC method. This method applies to the use of a laptop computer and a wireless printer but without router.

    You are therfore impression on an AD-HOC (as and when) basis.

    I followed the instructions and created an AD HOC network. The 3g dongle works wirelessly and I can use internet. He told me that the signal strength is excellent. But when I try to print there is no answer. He just informed me that there is no network connection.

    I've been around the houses of connection / disconnection to nothing does not. If I tried to remedy the situation from now until midnight, I'd be no closer. Me, that I tried to believe you. So folks, has anyone got any ideas? If I thought that buying a router, that it would be useful, I'd be out immediately and buy a.

    Any notice received with gratitude. Thanks in advance.

    Hi charleskeen,

    ·         What operating system do you use?

    ·         Have you ever been able to print before?

    Some printers require the initial Setup wired print wireless.

    Make sure you have the latest drivers as well.

    http://eSupport.Epson-Europe.com/ProductHome.aspx?LNG=en-IE&data=YZnBT5wk60ZjizmYmgWduFmKu3QiLmBK&TC=6

  • Satellite R630 DVD drive is power off and cannot turn on again

    For the first time, I tried to use DVD drive to install software. However, I found that his power was turned off. I checked the manual, which suggests that the FN + TAB key to turn on. But nothing happened after that I indexed both keys. I don't know what to do now. Thanks for your suggestions!

    Hello

    It s really strange that FN + TAB combination of keys doesn t work I often use this key combination to power on/off of the DVD player and it has always worked

    In any case, have you checked if the CD/DVD drive is listed in Device Manager correctly?

    Usually, if some keys FN n t work you must reinstall Flash Cards Support utility and added value package. These two tools can be downloaded from the official website of Toshiba:
    http://EU.computers.Toshiba-Europe.com/ > support & downloads > download drivers

    I hope that it helps :)

  • Unable to connect wireless to the Internet - Atheros - HP Pavilion dm3-1035dx

    Hello

    Laptop: HP Pavilion dm3-1035dx

    I just formatted the computer and the software has been reinstalled. I have the latest Atheros on the Site of HP drivers.

    I'm unable to connect to wireless internet, despite what I do. I will try to connect to a network, and it will then show with the little yellow Triangle showing limited access.

    Troubleshooting of the shows "wireless network connection is not a valid IP configuration [not not fixed]" and "[detected] problem with wireless adapter or access point.

    The wireless router is 2.4 GHz (B + G). Security is WPA2 (AES).

    Once I have disable the security for the wireless router I am able to connect to the internet. However, once I got change back to WPA2 (AES) I can no longer connect.

    I have crossed the wires and haven't found a working solution. If I could get help that would be greatly appreciated, thanks.

    Fixed a problem.

    Don't know what he did but the wireless connection is working now.

    I turned off my windows firewall. I disabled the router security and was able to connect to the internet.

    Then back to WPA2, the connection has failed.

    I tried ipconfig / renew ipconfig/release in commmand invites a few times and ipconfig/release would not work ("..") Unable to contact your dhcp server...). However, after several attempts more to play, I was able to connect wirelessly with WPA2 and windows firewall on.

    Ipconfig displays now, 192.168.0.1 and not 169.254.61.203

    Please help us Erico

Maybe you are looking for