Satellite U400 - the webcam no longer works

Hello guys here is my sudden probloema!
A year ago I bought a laptop
TOSHIBA - Satellite U400
with s.o. WinVista 32-bit and webcam built-in chicony etc...
Last year, everything worked properly, but since a few days, the webcam no longer works.
Whenever I try to open it, a message from the cam of management software that says "Webcam driver open fail, please reboot or the computer room.

I tried to do all this: aggioronato and downloaded the drivers from toshiba, uninstalled the program and re installed the webcam...! notebook bios set to day...! useless!
the strange thing... Although going into Device Manager... the webcam is not there...! But if the launch seems open just then check what caz... Caveat!

Gan you help me?
Graziee

If the cam is not listed in the devices (imaging devices) Manager, this normally means that the hardware is defective. It is possible that there is problem with the cable of the cam. Try to bring back the screen and check if the cam will be recognized again.

Tags: Toshiba

Similar Questions

  • veriface uninstalled, but the webcam no longer works

    I have a S12; I uninstalled the veriface because I do not use it and I found it annoying; but now the webcam does not work. Any ideas?  I'm ready to reinstall the veriface if that is what is necessary, but I can't find for XP.

    have you tried to re - install camera?

    (do not forget to activate it by pressing fn + esc before using)

  • Satellite U400 - 10L - touchpad no longer works

    Suddenly, my touchpad doesn't work.
    Any suggestions that might help with this problem?
    My laptop is Satellite U400 - 10L

    Hello

    I think that you should first check if the touchpad is not disabled.
    Check the FN + F9 key combination.

    If the touchpad still does not work, try reinstalling the driver for the touchpad.

    Welcome them

  • Satellite C660D-14W - webcam no longer works

    Hello

    My C660 is 2 weeks old and the webcam has suddenly stopped working, the window where the image of the camera should show has been replaced by a picture of a flower.
    Facial recognition was working fine until today, but it has also stopped working. I checked all the settings and everything to my (admittedly limited) knowledge seems to be as it should.
    I tried a system restore, and it made no difference.

    Can anyone help?
    Thank you.

    Start the web camera application and you will find option effect. Open and go to the third tab, called the mosquito net and make sure it is set to OFF.
    This should eliminate this flower you see.

    You restart the laptop and check webcam application again.

    Please send comments.

  • Satellite L300 webcam no longer works after upgrade to Windows 7

    I upgraded from Win Vista to Win 7 and my webcam no longer works.
    He said that there is an error. On the support page, it is said that this model is not intended for Win7, so I installed Win Vista drivers.
    Because the driver for Win7 is not available, the link is down. http://Support1.toshiba-tro.de/Tedd-files2/0/webcam-20091013162352.zip

    Any suggestions?

    Hello

    For me, it seems that you have not installed the right webcam software and so you can't get the webcam works with installed Win 7.

    Have what version of Win7 you installed? 32-bit or 64-bit?
    European driver Toshiba page provides the software of webcam for Win 7 32 bit for Satellite L300
    It s version 1.1.1.4.

    I found this choose: laptop Satellite L300 webcam driver satellite
    In such cases you will get listed all drivers webcam L300 series

  • The mouse no longer works on Satellite Pro A200-1F9 (on Windows and Linux)

    Hello. Suddenly, my USB mouse doesn't work on my satellite pro A200-1F9 laptop. I had this same problem on my Linux (Ubuntu Feisty) for the last week or two, but today was the first time that the mouse no longer works in Windows. Ideas for what's gone wrong? (If I boot Linux with the attached mouse, I get an error message when loading upward.) The mouse does not work it is logged at startup or I plug it later).

    Under Windows and Linux, the laptop still recognizes my external HD which also has a USB connection...

    Thanks, Shoko.

    In my opinion, you should test the USB feature. If you are 100% sure that the USB ports are working well check your mouse or try to use the other.

    Laptop mouse pad still works?

  • Satellite L850 webcam no longer works

    I have a Toshiba Satelite L850-1kt windows 8.1 and today my webcam no longer works.

    I can't find a newer version of the driver in the download section of the Web site.

    In Device Manager, my webcam is listed only when the hidden devices is selected, the Properties tab shows that the unit is unplugged, although it is not disconnected because it is built in webcam.

    Please help I need this problem quickly because I need my webcam

    Good news!

    Thanks for your comments!

  • I hawe eloquence pc Acer Aspire 5820TG 2 days my webcam no longer works on my Skype account and I can not find hao get it working again, I eawen hawe deleted the account and tried to reinstall

    Hello.

    I hawe eloquence pc Acer Aspire 5820TG 2 days my webcam no longer works on my Skype account and I can not find hao get it working again, I hawe eawen deleted the account and I tried to reinstall Skype, but still the webcam does not work, any hao suguestions to recower my webcam on my pc?
    Mr.Kare Krogstad.

    Check the Device Manager.  Click Start and right-click computer.  -> Device Manager, click Properties.  Look under imaging devices.  Right-click the entry for your webcam and click on properties.  If it is disabled, you can activate it if there is no lack of material.  Also check to see if there is one? or! by the entrance.  If so, you need to download a new copy of the driver and reinstall.

    Good luck.

  • Webcam no longer works on my Satellite T130

    Hello

    My T130 webcam has stopped working.
    When windows starts, a message saing that the camera is not found there.
    At the same time, Windows tries to install a driver for a usb device is 'unknown' and... failed.
    If I go into Device Manager, I see this unknown device (marked as unknown)

    I tried to remove and update devices, windows tried to install the driver again.
    I tried to remove the battery usb around and got the same result: everything reinstalled correctly but still an unknown usb device

    I tried to delete the driver for the webcam, then got a new copy on the Web from Toshiba site and reinstalled... Without success.

    Then, to eliminate a problem hardware or BIOS, I booted a Linux system and then, the webcam works.

    The webcam used to work a few weeks ago. An update of Windows is perhaps responsible for that.

    Any idea?

    Thanks in advance

    Jean-Luc

    Hello

    Something has confused the webcam driver and software.
    The unknown USB device seems to be the webcam from the webcam is connected to the USB controller.
    Installing the webcam usually news driver should fix this so it s really strange that you could not solve this installation of the webcam software.

    Maybe you should clean the BONES and the registry using CCLeaner (freeware)
    Of workaround recommends that you:
    -First of all uninstall webcam software
    -Then clean the BONES and the registry using the CCleaner
    -Now reboot the laptop
    -After that install the webcam software that you downloaded from the European driver Toshiba page. Or said in the way would you recommend test Sat T230 webcam driver. It is a newer version of the driver

  • Satellite A200 - 19K: double keyboard lights up and the mouse no longer works

    Hello

    I just brought a notebook a200 19 k and the double keyboard lights up and the mouse no longer works.
    I can't find why it does this in the manual and what is the purpose of light with symbols on it.

    The symbols have a purpose. Thank you very much

    Hello

    As far as I know that not all mobile A200 were shipped with this function called TouchPad/Dual Mode Pad touchpad

    The dual-mode tablet buttons provide many different functions such as:

    1.) button to -> it toggle cursor mode and the mode button.
    When you switch the button mode button flashes blue and the mouse does not work

    (2.)-> volume button increases or decreases the volume of the speakers and headphones

    (3.)-> e-mail button starts you mailbox to receive and send emails

    4.) button ConfigFree -> starts the ConfigFree tool

    5.)-> Windows Vista Photo Gallery button starts the Windows Vista Photo Gallery

    The other three buttons to the bottom of the trim can be configured with different functions.

    Please refer to the properties for pad synaptic dual for more details!

  • Satellite A100-649: battery no longer works

    Hello

    I bought a Toshiba Satellite A100-649 in June 2006.
    Now, 3 months later, the battery no longer works.
    Toshiba Powersaver says it's 94% of the power,
    the LED shows that it is loading but it hangs just to 94%.

    Well, I don't care if he could not load 100%, but this is
    What makes me angry:

    If I don't have my power adapter plugged in, it does not work
    more. It does not start up or anything. Nothing works.
    No LEDs + flashing, nothing.

    Now what is that? I mean, this laptop is like 3 months
    and the battery is already broken. A laptop without battery work
    It's like a computer desktop-computer without a monitor or something.

    So, maybe somebody has experiences like that or any ideas what I could do
    (except the assistance of Toshiba or bring it back to the shop where)
    I bought it, that's what I've done - nothing so far, nor in the store
    (or Toshiba).

    Welcome,

    Codec

    Hello

    It seems that your battery has a malfunction.
    Generally, the warranty covers the battery for about a year. So in your case all repairs and replacement will be free.
    In your case, I recommend to contact Toshiba service partner in your country and explain the guys the situation.
    I m 100% sure they will help you.

    I don't know if service point will have the entire notebook or only the battery broken m.
    But these details you could discuss with the technician.

    Good luck

  • Satellite L850 - HD Webcam does not work

    Hi, I tried to get my webcam to work, but apparently not, I had a glance online but does not, so you are my last chance before you give up and buy an external one to send back to you. I'll try to give you as much information as possible.

    I've had this laptop since 21 August, I bought from PC World. It's a L850 Satellite with Windows 7 64-bit

    Initially, the webcam has functioned well, everything was great and I thought it was great.

    Then all of a sudden a few weeks, he just stopped. I had a small notification in the bottom left of my screen that says "USB device not recognized", Uh oh. Whenever I try to use my laptop says that it has one. For a few weeks, the camera would be ok, and then not ok, that would change. Sometimes I could use it, other times I just couldn't.

    I had a look in Device Manager, and there was no mention of "Imaging devices" as it was before. But there is an 'unknown device' in the 'Bus USB controllers' falling down, with a yellow sign above it.

    Here's what I've tried so far:

    Drivers - I have followed the advice of a forum and downloaded the latest apparent Webcam driver for Windows 7 64 bit. Excerpt on my desktop and ran the .exe. After pressing the Start button, it loads and asks if I am sure I want the program to make changes to my computer. I press Yes, but then nothing apparent happens. I expected a "drivers installed correctly" or something, but nothing happened, and the problem does not go far. I don't know if it was supposed to be anything, but eh. I downloaded a program called DevManView which allowed me to see all the features that were already on the laptop. My "Toshiba Web Camera - HD" was among them, so I took a peek at the properties. He said "disabled: no, connected: No. I came to the conclusion that it is connected, but for some reason my laptop any works just simply can not what it is.." Is there something I can do?

    BIOS - in the BIOS, the webcam is enabled.

    System Restore - is went to when the Webcam would have worked, but nothing helps, no change.

    Changes/webcam system changes that may have caused the problem:

    I have used what we call Fake Webcam, so I could replay videos more at my cousins through Skype, I uninstalled since all this. I've never used the webcam normally when I'm fake webcam, but then when I tried, it wouldn't work, so when I uninstalled Fake Webcam, he stated that no camera has been detected.

    I am at my wits end, I really want this thing to work, any suggestions?

    Best thing for you would be to make ultimate check and reinstall the recovery image and test the functionality with the factory settings. I know that this is a more radical method, but after doing this, you will see if the cam is recognized and registered properly or not.

    If the problem starts to be present again, I think there may be a hardware problem.
    What do you think of all this?

  • x 201 Tablet owner, webcam no longer works

    I know there are some other threads on this, but I was hoping that maybe someone has a new idea.  I had my x201T for about a month and need to do a system restore after (yes I did something stupid and I know that it was not very long) and I tried to set up a Skype account and the webcam doesn't work.  It worked until I did the system restore.  I have all the updates.  Is there anyone who can help me?  Thank you.

    Thanks for responding.  I reinstalled the driver (it did not help), but I noticed that there is a usefulness of the built-in camera.  So I downloaded this also, screwed her and now my webcam works fine.  Thanks for the tip.

  • The keyboard and the mouse no longer works to update you Sierra

    Hello, I upgraded to OS Sierra and I began to spend more and suspending Notepad, then I do not recognize their keyboard and mouse notbook. It forces the walk outside and then worked, but after a few days I don't work any more.

    Thank you

    The keyboard and the mouse no longer works to update you Sierra

    Hi gnardone,

    Thanks for posting in the Community Support from Apple. I understand that you are having problems using your mouse and your keyboard after the update for Sierra. View the work of keyboard and mouse are crucial for your Mac, so I can understand how this is a problem for you. I'm happy to offer assistance.

    You are having problems with the keyboard and the trackpad that are part of your MacBook or you are having problems with a keyboard and an external mouse? I recommend taking a look at the article below.

    If your Apple wireless mouse, keyboard or trackpad doesn't work as expected

    If you're still having trouble, let us know what kind of mouse and keyboard that you are having problems with and what you have tried to solve this problem.

    Best regards.

  • Pad at the top of the keyboard no longer works after installing Windows 7

    I have a cl dv7-1273.  Just changed from Vista Home Premium 64 for Windows 7 64.   Win 7 installed OK.  After you install the pad at the top of the keyboard no longer works in the dialogs like this.  When I entered the numbers here I had to use the keypad.  Keys still work in Word, Excel, Evernote, etc..

    Someone on the forum had the same problem of pad during the upgrade to win 8.  They solved the problem by uninstalling Comcast constant guard.   I removed a constant guard and now my keypad work.  Is there something in constant guard that is in conflict with the keys from HP laptop during upgrade to Win 7 or 8 Win.

Maybe you are looking for

  • Toshiba virtual Store account Reset - 24144

    Please reset Toshiba e-store account - 24144

  • Lexmark printer will not connect to the router

    Original title: HELP I switched to Fios and now have a new modem/router and I don't know how to get my Lexmark printer to recognize. How can I solve this problem?

  • Volume too low

    I have the volume, but it is too low.  It used to be high enough to hear, but somewhere along the way, he has changed.  I clicked on the volume and triggered the slider all the way to the top.  I clicked on "Mix" and raised the bar all the way to the

  • How to open files from the list of contacts on the computer at home, the vcf files

    I exported my contacts list on my computer, it is a .vcf file.  I can open it by clicking on it, but only the first contact is displayed.  This screen looks like a file roledex.  but I don't know how to access other files.  I can open the file with "

  • How to check if the e-mail account is defined or not?

    Hello my application crashes to "Store store = Session.waitForDefaultSession () .getStore () this line, because it does not account for the email set. We can check programmatically if the e-mail account is set or not? If you have any ideas please sha