Satellite Z830 - backup on USB storage drive recovery

Similar Questions

• Satellite L655-1HE «Problem of HARD drive recovery»

  Hello

  I have the Satellite L655-1HE. I created a "HARD drive recovery" through "create recovery media. On the contrary, CD/DVD, I put it in a USB Flash drive. But when I used it, a mistake was "copy of splitpart or the Canadian Red Cross has failed!" After that, I can't boot my laptop more. There is a message "BOOTMNGR missing." I think I already deleted the operating system in the player. Please help me. How can I fix?

  Hello

  If you can, please try to boot again from the USB and run the recovery.

  Whatever the problem, if the recovery is unsuccessful, I recommend the following steps:

  -buy a set of recovery-store to the wire to https://backupmedia.toshiba.eu
  -If you did, and even this game fails to install, take care to check your HARD disk for problems.

  Hope this helps

  Tom BR

• X 360-15 t Touch portable spectrum: imaging system, USB Flash drive recovery?

  I'll create my recovery Image of the system using a USB Flash drive, how many GBs do I need?

  Hello

  Normally you need about 24 GB, but not 24GB Flash DRIVE on the market that's why you buy the 32 GB.

  Kind regards.

• Satellite T130 - how to start HARD drive recovery?

  Hello

  Windows 7 was not working properly and I tried to reinstall. However, after the installation, it starts but it does not complete the process and maintains the pc shut down before I could use it. I can now use it just because I installed Ubuntu and I can also access all other partitions of Ubuntu, one that contains the HDD Recovery folder.

  Can I reinstall windows from this folder?

  I see that someone else already managed, using stormwater management files as the link below shows
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=53952

  Thank you

  Andrea

  Hello

  You are still able to access the start menu in Windows or Ubuntu installation has been removed and the Windows boot loader?
  If so, you are not able to start the HARD drive recovery more

  Why? It is very easy: even if you are able to access the files, you can start this feature because the original Windows Start menu of the preinstalled Windows system is necessary to start the HARD drive recovery feature.
  So in this case, you need the recovery media (USB key) that you created using Toshiba recovery media creator.

  Of course, this could work without installed Windows, but there is no guarantee for this.

  But why I m telling you this information? You can find everything in your owner's manual ;)

• Satellite A300 - how to start HARD drive recovery after own OS insatallation

  Hi guys.

  I have a question.
  I have a Toshiba Satellite A300, which came with Windows Vista.
  Normally I have the recovery with the normally pre-installed utility partition.
  After that I formatted the system partition, I installed a clean and fresh Windows 7 copy.

  My question is this.
  Since the recovery partition does not get soiled with, is there not a way to install the disk recovery utility hard back in recovery of Windows of F8 before the boot options?

  Please don't tell me that I need to have the recovery disk.
  I already did, I just want to find a solution because it is not that hard for someone who accidentally formatted the system partition and had not created the disks, but the recovery partition. My guess is to do some modifications in the files of the Windows recovery environment that are launched when you use the option to repair my computer at startup, because normally, HARD drive recovery utility appears as one of its tools-options.

  The problem is that I don't have to where these files are, maybe (C:\boot?)
  Currently, I am trying to see if a facility upgrade of windows 7 on windows vista will keep options for hard drive recovery then maybe I will find what it takes.

  All suggestions are welcome!
  Thank you for your time.

  OK, just a hint more, I found what is happening with the recovery environment, and which must be replaced to include more tools...
  This article was really helpful:
  http://www.techplat.com/2010/02/12/how-to-replace-default-Windows-7-recovery-environment-in-diagnostic-and-recovery-toolset/

  Also, I found a few guides microsoft on changing windows 7 recovery environment.
  http://TechNet.Microsoft.com/en-us/library/dd744576%28WS.10%29.aspx
  http://TechNet.Microsoft.com/en-us/library/dd744525%28WS.10%29.aspx

  So I continue and I think I'm close...

• Satellite A200 cannot find the storage driver

  I have a laptop satellite A200 and everytime I restart the computer, it can not find the ' armazenamento driver of massa "in English, I guess it's"storage driver.

  We can I find it?

  > it can not find the ' armazenamento driver of massa "in English, I guess it's"storage driver.

  Go to the page of the Toshiba driver and download, storage manager,.

  http://EU.computers.Toshiba-Europe.c...ivers_bios.jsp

• follow-up to the issue of data on a USB flash drive recovery

  HP instructions say that the 32 GB flash drive has NOT should be labeled as Windows 8 compatible.   I bought a Sandisk 32 GB yesterday for $20 on sale, but it says on the back that it is compatible.

  More / or less expensive flash drives did not address if compatible with Windows 8.

  I have Windows 8.1

  Thanks in advance for your help...

  Hello

  If the flash drive is listed as "Windows compatible 8" may not be used - the reason is that the creation of HP recovery media software is seeking a device marked Win 8 compatible show as internal drives flash drives and external .

  In the example below, the 32 Gb flash drive USB 'Dave G' shows as a drive hard internal who can not be used, while the USB flash drive "Removable disc H" would work.

  

  Kind regards

  DP - K

• Satellite A300 - Boot from USB Flash Drive

  Is it possible to make my laptop boot USB flash drive?
  I checked the BIOS settings, but could not find anything that allows the boot from USB.

  > So after 40 hours there is no one who can answer this question 'complex'... strange forum.
  Hay buddy, you have good sense of humor ;)
  Do you really believe that someone to sit here and wait for your non-complex question? ;)
  Anyway, this issue is so simple and you don't need to ask someone here. If you do not find option bootable BIOS to set USB peripheral device for me is logical that this will not work.
  Please check the BIOS settings.

• Can satellite A300d-16W - I use HARD drive recovery after installing Win XP?

  I formatted my PC and installed XP. Can I reinstall Vista using HARD drive recovery?

  > I formatted my PC and install XP

  No, you cannot use the recovery HARD drive after installing Win XP because looks like you have formatted the HARD drive and the HARD disk partition has been erased.

  So you need to use the Toshiba Recovery disk that I hope, you created before you formatted the HARD drive.

  Greetings

• Satellite A300: Delete files from HARD drive recovery - how to download missing files

  Hello.

  I format partition D:, where was a HARD drive recovery file, now I can't recover my PC.
  Can simple question, I download this file from a Web of Toshiba site or from another site?

  You can not download files from HARD drive recovery or recovery image.
  You can order the DVD of recovery from here:
  http://backupmedia.Toshiba.EU/landing.aspx

• Disable the peripheral only USB storage drive?

  How can I disable only USB key in windows XP Professional without disable keyboard and mouse because these are fixed with USB ports.
  Operating system: Windows XP Profesional

  Hi adeelahmed,

  See the Microsoft article below and try the steps mentioned, check if it helps.

  How can I prevent users to connect to a USB storage device?

  http://support.Microsoft.com/kb/823732

• Recovery Manager, you want to do a backup via USB no drive

  USB instead of disc using dvd - R, will not let me proceed .i want to make a copy, so if I have problems I can fix my computer. Using Recovery Manager

  Hello

  There should be few options and you can select DVD or USB. Please read the following instructions:

  http://h10032.www1.HP.com/CTG/manual/c01662115.PDF

  Kind regards.

• How to "replenish" my iphone backup after being hard drive recovery

  Hello. (its my first time here)

  My windows 10 was then I copied all my data off the coast and decided to do a reset. It was only after I realized that my iphone backup was on it. Now would not be a problem on a normal day like what I have to do is just to backup my iphone again and have a backup on my computer. Now here's the twist, I sold my iphone last week and expect to buy one this week, so I did not have a working version as well. In any case, I immediately made a recovery of data on my hard drive using recuva and now I have different files from my hard drive that have all looks Greek to me. I have nothing else except my itunes files supported. So, how can I filter all my backups of itunes on the recovered data file and put them together to get a job to the top?

  All suggestions will be of a great help for me

  Hello rahish_J,

  Thank you for using communities of Apple Support.

  I understand that you have used a data recovery program to restore the data, and now you want to recover your iPhone back ups.  I suggest that you put the backups of your recovered data in the location of the file below, which should appear as an option to restore from iTunes.

  Windows Vista, 7, 8 and 10

  Find device backups in \AppData\Roaming\Apple Computer\MobileSync\Backup\ \Users\ (user name)

  For quick access to the Application Data folder:

  1. Locate the search bar.
     Windows Vista or Windows 7: click Start.
     Windows 8: click the magnifying glass in the upper right.
     Windows 10: Click the search bar, next to the Start button.
  2. In the search bar, type:
     %AppData%\protector.exe
  3. Press return.
  4. Double-click these files: Apple Computer > MobileSync > Backup.

  Find and manage your iTunes backups

  Take care.

• Satellite Z30-B-100 - no HARD drive recovery

  Hello
  I made a mistake. I made the change of the partition on the SSD (drive c).
  After that, the recovery feature does not work. But I see the hissene recovery partition. How can I copy this partition on USB drive as bootable disk?
  I managed to copy the partition hidden with the partition program, but I can't boot from USB. I hope that there is a good method to copy the files for recovery as bootable.
  Can you help me?
  Kind regards
  István

  I tried this method http://aps2.toshiba-tro.de/kb0/HTD4103KB0000R01.htm
  but I don't know how to copy it, because I don't know the drive letter of the hidden restore partition.
  Is is good to try this command ('XCOPY d:\*.* y:\/e/s/f") as a copy of drive c to usb?

• No usb optical drive recovery

  I have a n040us.  When I try to create a recovery disc, the only option is the usb of my optical drive is not listed and is the one I want to use.  My optical drive works

  To help you, please indicate the product code and the whole model number.