Save the SET LOGLEVEL VARIABLE = 2, DISABLE_CACHE_HIT = 1; in a report

Similar Questions

• ADF refresh page with page fragments jsff jsf after the set session variable

  Hello.

  I have a model that includes a button that allows you to select a profile, you push the button appear available profiles, choose one and press to accept. After that, I put a variable session successfully.

  I have a page of 'First' of jsf with two fragments of page jsff after seeing a link. The display link is composed by a headerView and detailView. The headerView had a variable binding. What I need, is that this parameter (bindVariableParameter) can be defined by the session of the model variable.

  That's what I get:

  I am in a homepage (separate Application Module), model button is pushed until I load "first" jsf page and after that, I go to the page jsf 'First', that information is loaded successfully. What I do in the Application Module is something like this:

  protected void prepareSession (one session) {}

  SessionScope card = ADFContext.getCurrent () .getSessionScope ();

  Company string = (String) sessionScope.get ("compId");

  System.out.println ("Default Comapny in British Colombia is:" + company);

  super.prepareSession (session);

  this.getSession () .getUserData () .put ("The company", company);

  System.out.println ("after the definition userData value card BC");

  }

  And in the variable binding expression of the headerView that I use:

  adf.userSession.userData.Company

  It works very well! But!

  When I press the button again and I chose another profile, the info is not updated. In the headerView or in the detailView.

  Also, when I go to the 'First' jsf page (without previously pressing the button model), I had no info, which is just, because I have no session variable. After I have press the model and select the profile, but the page is not refreshed.

  I tried many ways to this, but I'm lost.

  Could you help me?

  Kind regards.

  I'm not sure that understand your use case. What do I get, you set a parameter after that you press a button on the home page to pass this parameter to the first.jsf.

  Why don't you implement a method of the application module and call it directly with the parameter. The session of preparation will not be called whenever you browse but only init am.

  Do you need the parameter in the layer model or only in the display?

  Timo

• Save the set version of original

  In Photoshop elements 12, why not my JPEGs published record in the version with the original RAW photo even if I checked the box that says "save in the defined Version with Original"?  Sometimes it works but all often is not so I go in a stack the edited with the original RAW photo jpeg.

  Did you upgrade to version 12.1?

• I can't save the setting to disable third party cookies.

  I uncheck the box for "Accept third-party cookies" and that it will remain disabled for my browsing session. However, every time that I reopen Firefox it, the box will be checked. Why Firefox automatically re - allows third-party cookies whenever I close the browser?

  See also http://kb.mozillazine.org/Preferences_not_saved

• How to save the settings of the application (variables)?

  How can I save the application settings? I have a variable, which by default is 0. User can it set to 1 if it has something to do. How it save? It is possible without e/s?

  The best place to start is SharedObject.

• When downloading using firefox I should save the download, and then must go to the download file to start the download. When I download using internet explore I can run a download at the time where as it is downloaded. Can I change a setting somewhere?

  I use Windows 7 with firefox as my default browser. When I download a program using firefox, I wonder if I want to save the file, and then must go to the download folder to start the download. When I download using internet explorer, I gives me the ability to run the download at the time where it is downloaded instead of save the download. Is there a setting I can change to allow me to run downloads when using firefox instead of record?

  Hi shortwedge3,

  You can use the OpenDownload2 extension for the run option when downloading files with Firefox

• Clsing Firfox 4. -for Yahoo does not save the tabs when closing like the previous versions. Your help says settings but does not tell me what setting...

  In all previous versions of Firefox, when I close Firefox, asked me if I wanted to save my tabs. The latest version does not have this option. Why not and what adjustment will bring back this feature. I don't have to pull down the menu history and ask the previous Session, I should be able to start with my previous session if I exit and not to close tabs.

  Updates should increase the functionality and NOT completely change the appearance of the program.

  Thank you

  "I asked also originally where the setting was to open Firefox with my previous tabs."

  I do not see that in your original question, above. I have provided an answer to this question in my second reply:

  • You can set this option in the Options > general change, "when Firefox opens:" to "show my windows and tabs from last time '.

  "If you receive a number of issues, I think that you and your partners might inform Mozilla user base concerns."

  1. It is not our function in his presence.
  2. You can send comments (comment box very limited; ( there will be no response to you to submit your comments) : help > submit your comments
  3. You can also make comments to the following address (there is no answer to you from the following link, more space of commentary available on this link): http://hendrix.mozilla.org/

  If the foregoing has answered your questions, please take a few minutes to return to the forum, connect and click 'Resolved' next to the answer that solves your problem of Firefox support, so that other users can find answers that have worked to solve problems. Thank you.

• Outlook express does not save the password setting

  Original title: Outlook express

  My outlook express keeps invites me to press ok for my saved password whenever I press a button, or after a period of 15-30 seconds. How to disable this option? I saved the password and I went to properties/server to uncheck the box saying: I need password authentication. How can I stop this incitement of popping up whenever I'm on my email several times?

  Outlook Express keeps to request your password
  http://www.dougknox.com/XP/Tips/xp_oe_passwords.htm

  Save the password setting will no longer exist in Outlook or Outlook Express
  http://support.Microsoft.com/kb/290684

• Error - ' Manager of power strategy cannot set the regime... two revision levels are incompatible "when trying to save the scheme in power options.

  Original title: cannot set a power scheme in Power Options

  Cannot set a power scheme. When I try to save the scheme, "Manager power strategy impossible to define the... two revision levels are incompatible."

  How can I fix it?

  Hi BernieHopkins,

  1 have you properly previously defined the power scheme?

  2 have you made any hardware changes or software on the computer before this problem?

  3. What is the full error message that you receive?

  If you receive the same error as mentioned in this link, you can follow this link & check if the problem persists.

  Error message: Power Manager political unable to define a strategy. Indicates two revision levels are incompatible

  Hope the helps of information.
  Please post back and we do know.

• How to set the TMP/TEMP variables on account limited Vista's GUI?

  I have Vista64 Home Premium SP2.
  I would like to change the TMP/TEMP variables for my limited account in Vista.

  It is easy to do for the system account or my admin account
  (under advanced system environment variables,).

  But if I want to do the same thing on my limited account, UAC is triggered
  and the admin account variables are exposed, rather than limited.

  I then tried runas/user 'control sysdm.cpl', experiment /noprofile profile/env
  but the result is the same.

  I know that this is possible by editing the registry,
  But first of all, I would like to know MS medium to do so.

  BTW, as far as I KNOW, UNIX/Linux can have more intelligent way to elevation of privileges of the current user,
  instead of substituting another.

  HM, this seems to be the solution, it has not previously found.
  http://support.Microsoft.com/kb/931715/en-us
  http://www.Vistax64.com/Vista-account-administration/7649-setting-environment-variables.html

  Checked and use the setx command works.

• The system is unable to boot automatically. The BOOT environment variable must be set to a bootable image.

  Hey guys

  I need help, in my company trying to learn switches I flashed my switch all :(

  I now get this error

  The system is unable to boot automatically.  The BOOT
  environment variable must be set with a bootable
  image.

  I downloaded the c2950-i6q4l2 - tar.121 - 22.EA14.tar for the switch, but I'm unclear on how to load the catalyst 2950 only

  switch: dir flash:
  Directory of flash: /.

  3 - rwx 269 env_vars

  7739904 bytes available (1536 bytes used)
  switch: start
  Loading ""...: permission denied ".

  Error loading «»

  Interrupt within 5 seconds to cancel the startup process.
  Boot process failed...
  switch: start
  Loading ""...: permission denied ".

  Error loading «»

  Interrupt within 5 seconds to cancel the startup process.
  Boot process failed...
  switch:

  C2950 Boot Loader (C2950-HBOOT-M), Version 12.1 (11r) EA1, RELEASE SOFTWARE (fc1)
  Updated Tuesday 22 July 02 17:18 by antonino
  WS-C2950-24 from...
  Basic Ethernet MAC address: 00:15:2 b: 46:7 b: 00
  XMODEM file system is available.
  Initializing the Flash...
  flashfs [0]: 1 files, directories 1
  flashfs [0]: 0 orphaned files, orphaned directories 0
  flashfs [0]: Total number of bytes: 7741440
  flashfs [0]: used bytes: 1536
  flashfs [0]: available bytes: 7739904
  flashfs [0]: fsck flashfs takes 4 seconds.
  .. .done boot flash.
  Boot sector file system (bs :) installed, isfd: 3)
  Setting Filesystem block (pb :) installed, isfd: 4)
  Loading ""...: permission denied ".

  Error loading «»

  Interrupt within 5 seconds to cancel the startup process.
  Boot process failed...

  The system is unable to boot automatically.  The BOOT
  environment variable must be set with a bootable
  image.

  switch:
  switch:
  switch: flash
  Initializing the Flash...
  ... The flash is already initialized.
  switch: dir /.
  Unknown cmd: dir /.
  switch: dir

  List of currently registered file systems:

  Flash [0]: (reading / writing)
  XMODEM [1]: (read-only)
  NULL [2]: (reading / writing)
  BS [3]: (read-only)

  switch: 0
  Unknown cmd: 0
  switch: flash_init
  switch: load_helper
  switch: dir flash:
  Directory of flash: /.

  2 - rwx 269 env_vars

  7739904 bytes available (1536 bytes used)
  switch:

  Hello

  It seems that the image is not in the flash memory. Do you know where you downloaded the image? Once we know, we can understand what statement of startup, you need to do to make it start correctly.

  Thank you

  Garrett

• Looking for ways to solve the following problems of these messages: "check the temp environment variable. "Unable to print the document. "You don't have permission to save in this location."

  Looking for ways to solve the following problems of these messages: "check the temp environment variable. "Unable to print the document. "You don't have permission to save in this location."

  Hi Michael,

  Please follow the link and see the issue:

  Cannot print or preview before printing a Web page in Internet Explorer: http://support.Microsoft.com/kb/973479

  If the problem is specific to MS Word, then I suggest you to post the same question in the forums of MS Office for assistance.

  Microsoft Office Forum:

  http://answers.Microsoft.com/en-us/Office/Forum/Word

  I hope this helps.

• programmatically set the bind view variable value of object that showed to the query Panel

  Hello

  I have a case in 11.1.1.7 Jdev, I deploy my application on BPM 11.1.1.7.

  I have a VO that three attributes of it was put in a viewcriteria... Let's attribute A1, A2, and A3. the view criteria is any condition "AND".

  and then I create a variable binding in the VO named b. my vo also query using this variable B.

  in the jspx, I create a query panel based on the viewcriteria. then in the A1, A2, A3 and B query pane shows.

  I can reset the Panel request programmatically using this tutorial http://www.jobinesh.com/2011/04/programmatically-resetting-and-search.html

  but unfortunately he didn't succeed for A1, A2, A3 because they are in the display criteria, but B can't reset.

  I tried to put the value programmatically using queryModel, queryDescriptor, setNamedWhereClauseParam, but this failed and it starts to makes me crazy...

  anyone here seen cases like me? and found the workaround? pls throw some light.

  Thank you

  Have you tried with VariableValueManager? http://www.jobinesh.com/2010/10/how-to-set-bind-variable-values-at.html

  Dario

• Save the value of a Boolean variable

  How can I save the value of a Boolean variable, so that when I open the file, it can be with the parameters in which I left?

  I created the variable to the top of the frame:

  var audio:Boolean = true;
  

  And I added the conditions for the buttons:

  if(audio == true) {
      Sound.play();
    }
  

  But whenever I open the application preferences is reset to true, wanted to leave with this preference be saved in the case of boolean, true (enabled) or false (disabled).

  can someone help me? Please, I beg you.

  Thanks in advance!

  A sharedObject is always appropriate for a local application. The only reason to use anything else would be size of storage needs.

• Need information to set up the XmlDocumentInfoBean process variable?

  Dear team,

  We want to use the QueryForMultipleRowsAsXML service for one of the requirement. For the information this service XML parameter, we'd spend column/xml mappings dynamically. We found using the XmlDocumentInfoBean process variable (JDBC Data Type) we can pass the column mapping dynamically. Could you please help us to set up the column mappings by using this variable. In fact, we must use this type of variable.

  
  

  Thanks in advance

  Patrick

  
  

  
  

  
  

  Ravi,

  Attached is a working example. That should help you.

  -Wasil