Scanning channels Media Center cannot find all the channels

Similar Questions

• WINXP Media Center says that it cannot find all the services

  Windows XP Media Center.

  I bought the Mesh computer in October 2005. It is equipped with Windows XP MEDIA CENTER 2005

  It has graphics card 128 MB ATI X 700 PCI - E TVOUT - DVI graphics card and a Digital Media Center TV Capture Card.

  For some reason I did not put in place at the time. I'm doing it now.

  I have wireless application to connect broadband. Stipulates that the media guide has beenloaded but also indicates that the scan finds no service. I wonder to check the antenna and connections are properly installed. How to do this.

  Media Center installation instructions: http://windows.microsoft.com/en-US/windows/products/windows-media-center/set-it-up

  J W Stuart: http://www.pagestart.com

• Vista Media Center - TV station changed its frequency. Media Center cannot find station on the new frequency.

  My ABC (Cincinnati) local affiliate, WCPO, today broadcasting on Channel VHF 9 - 09/12/2010. They are now on a UHF frequency radio. I don't know what channel/frequency. When this switch occurred, Media Center has started to display the message "No TV signal". Apparently, the Media Center picks up information of the station from a central location and not be notified of this change.

  I have downloaded the latest Media Center Guide, turn the computer off and then restart Vista. This did not help.

  Went to 'Task'-> 'Settings'-> 'Set Up TV Signal' this morning (9:30 EST, 11/12/2010) and went into the channel configuration process. When I finished, WCPO Channel 9 has been available again. Here is the line from the file atscchannel.xml for WCPO it appears now:

• Windows Media Center cannot find the tv tuner

  I have vista windows prim. My Media Center worked very well until two days have been, say, can not find tv tuner. I removed the card and to reboot, reinstall drivers. It's a 550 ATI tv tuner card. I also tried to restore.

  Wade,
  Are you using ReadyBoost? Try it without that or unnecessary USB connections.

  WZ5T 73

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Windows media Center cannot find the path of HRESULT: 0 x 80070003

  I'm trying to put Windows media center tv, but I can't because of the # following can not find the path HRESULT: 0 x 80070003 someone can help - I heartily thank you David

  Uninstall, reinstall, and then update the TV tuner card. Visit the manufacturer's Web site to download and install the latest driver TV tuner card driver. Once that is done, try to reconfigure WMC from scratch.

• Firefox 7.0.1 cannot find all the NET pages, so it does not work!

  When you install Firefox 7.0.1 there not all NET pages, tracks and the tracks of the search but can't find. I had the same problem with the latest versions of Firefox 6, but then Firefox 7.0 fi worked. I tried to update 7.0.1 several times, the IFS and the United States, I uninstalled 7.0 first and then after reboot 7.0.1 installed several times, but always the same problem. I use Windows 7 Ultimate in Finnish.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls

• Photo metro style app cannot find all the pictures from the picture library...

  In windows server 2012, I added pictures to the image library for windows, but app photo metro style still can't find pictures from the picture library...

  Hi Clerck,

  The question you posted would be better suited in the the TechNet Forums. I would recommend posting your query in the link below.

  General Forum(Windows Server) Technet

  Hope this information helps.

• Windows media player cannot read all items in the playlist

  It says Windows media player cannot play all the items in the playlist. This happens from time to time. Something is interfering with the player? I don't know what to do when this happens. I hope that it is a minor and simple solution.

  Can anyone help?

  Original title: Windows media player Version 12:

  Hello

  1. What is the full/exact error message?

  2. When you receive this error message?

  If your computer has problems to access your collection of digital media files in the Windows Media Player library, try to use the of the Windows Media Player library Troubleshooter to fix the problem. The troubleshooter makes sure that Windows Media Player is installed correctly on your computer and checks if the Player library is corrupted.

  I suggest the steps and check if that helps.

  Method 1
  I suggest you to perform the following troubleshooters.
  Open the troubleshooter in the Windows Media Player library

  http://Windows.Microsoft.com/en-in/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

  You can try to use the troubleshooting Windows Media Player settings Troubleshooter to automatically find and fix some common problems. See the link below.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

   

  Method 2

  If the problem is not resolved I would suggest you follow these steps and check if it helps.

  Step 1:
  Disable and enable Windows Media Player and check if it opens.

  a. click Start and select Control Panel.
  b. click on programs and features.
  c. click on or turn off Windows features turn on on the left side.
  d. develop media features; clear the check box Windows Media Player.
  e. click Yes and OK to continue.
  f. restart the computer.

  Note: If windows media player 12 is already disabled, follow the steps mentioned below:
  After the restart, follow these steps:

  g. click on start and select Control Panel.
  h. click programs and features.
  i. click on Turn Windows features on the left side on or off.
  j. develop media features; Check the Windows Media Player.
  k. click Yes and OK to continue.
  a. restart the computer.

  This would be re - install windows media player.

  Reference:
  Turn on or off Windows features
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  It will be useful.

• "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".

  Original title: when setting up Windows Media Center, I get the error message: "IR hardware not detected".

  I have an internal TV Tuner that has been installed by HP, when I bought recently a "computer build-your-own." (According to the control panel Device Manager, my tuner is a Win TV HVR 1290, made by Hauppauge). The computer came with Windows 7. While installing Windows Media Center, after setting up the TV Signal (on channel 3) I am able to see a video thumbnail on my computer screen. I am also able to change the channel using my remote control U-Verse (not the Windows remote control supplied with the computer). So far so good! I then hit next and get the following message: "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".  After you receive this message, the installation procedure is completed. I called HP that support intalled the tuner. They had not the slightest idea what to do. I then called Hauppage customer (manufacturer of TV Tuner). They said that I need to plug one end of the IR Blaster cable that shipped with the computer in a slot in the back of my computer (they told me which slot). They said so to run the IR all the way cable to my cable box and the other end of the cable to my cable box of band. They said it was necessary to be able to use my Microsoft Remote to instruct the box to change channels (cable IR stuck on the box). I told her that I did not use the Microsoft Remote, I could change the channel with my U-verse remote (that I preferred to use anyway). He said that it took the cable on the band decoder in order to remove the error message and the installation of Windows Media Center. I then called U-Verse technical adapter who informed me of their set-top boxes (made by Cisco Systems) do not have the ability to receive signals IR IR Blaster cable (or any othe IR signal source). Microsoft is apparently not understand how U-Verse set-top boxes are designed to work and sells a product incompatible remote control/IR. My question is this: How do I set up Windows Media Center, in order to avoid getting the error message "IR hardware not detected" when you install Windows Media Center and just use the remote control of the U-Verse that I prefer to use in the first place. Once understand you this point, please send the information to HP, At & T U-Verse and others. Thank you.

  Ron, I have something for you!

  and for all the people who have this problem :)

  Hi, I had the time of IR not detected in Windows 7 Ultimate with a TV wonder 650 card and a box of digital adapter from Verizon for my PC... Go on the road to installation and after the Media Center channel search, choose manual configuration. Choose the aerial signal (I aso picked after this analog) l. After he sought more, he finds no channels.  Do not be afraid. Just accept it and go to the main settings page in the Mediacenter. If I remember correctly, then select TV Guide. Choose Add channel. I added the channel 3.

  Since my Verizon box has no IR for the computer, I added the channel 3 for the media Center and I change the channels with my Verizon remote. All my stations in the Verizon box go to Channel 3.

  The story here is so, for some reason any Windows detects that only my box channel signal TV and you must manually configure the media center on the air, then go to settings and add the channel you want in the guide.

  Why the guide TV control which channel you can tune is beyond me, but the scanner locks all channels, it does not detect. they must be added manually in the guide.

  My TV works and looks okay now.

  It actually works!

  the only problem is that it is not in HD

  but there is something

  
  

• Windows Media Player cannot find the file. 'If you try to play, burn, or sync an item that is in your library, the element can point to a file that has been moved, renamed or deleted'.

  Original title:

  Problems with rip audio CDs with windows media player

  Bought the CD now 82 and try to tear with the windows media player player, but keep getting the message "Windows Media Player cannot find the file. If you try to play, burn, or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted." What should I do to rip this cd please did tear previously no probs, but now seems to have a problem

  Thanks in advance

  Anne

  Hello
  1. You did changes to the computer before the show?
  2. Are you able to extract other CDs using Windows media Player?
  3. What is the file format of the file you are trying to extract?
  Method 1:
  Step 1:
  You can run the Windows Media Player Library convenience store & check if you are able to rip CDs.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter
  Step 2:

  Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  
  Method 2: Rebuild the windows media player.

  exit Windows Media Player.
  b. click Start, type %LOCALAPPDATA%\Microsoft\Media Playerand then click OK.
  c. Select all files in the folder, and then click delete on the file menu.

  Note:
  You don't have to remove the folders that are in this folder.
  c. restart Windows Media Player.
  Note:
  Windows Media Player automatically rebuilds the database.
  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:
  exit Windows Media Player.
  b. click Start, type %LOCALAPPDATA%\Microsoft, and then click OK.
  c. Select the Media Player folder, and then click delete on the file menu.
  d. restart Windows Media Player.
  Note:
  Windows Media Player automatically rebuilds the database.

  Method 3: Disable and enable the windows media player. Follow these steps:

  a. open the Control Panel from the Start menu.
  b. open programs and features in Control Panel .
  
  Note: If the programs and features are not available, change the view by large icons at the top right of the control panel.

  c. Select Windows turn on or off features in the left column of the window programs and features.
  d. click on the plus sign next to multimedia functions.
  e. uncheck Windows Media player and then click OK. (You may receive a warning message. Click on the Yes button.)
  f. restart your computer.
  g. to reactivate the Media center follow the same steps and place a checkmark for Windows Media player.
  h. click on the Ok button.

  
  i. restart your computer.
  Reference:
  Turn on or off Windows features
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off
  Method 4:
  Change the location of Rip. see the steps mentioned in the link
  given below:
  To change rip settings in the Options dialog box
  
  
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-ripping-music
  I hope this helps!

• Unable to play the song or burning CDs in windows media player 11 error message: "Windows Media Player cannot find the file.

  Original title: the windows media player 11

  I have the media player 11 and my operating system is XP Home Edition, but for some reason, when I try to play a song or burn it to a CD, this is the error message I get.  Can someone help me with this?

  Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted. reason for which each song I ever download from the internet is going to play is no longer...

  Thank you.

  Hi NancyCamper,

  ·         Have you made changes on the computer?

  Follow these methods.

  Method 1: Follow the steps in the article.

  Resources for the resolution of problems in Windows Media Player

  http://support.Microsoft.com/kb/843509

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

• Error: "Windows Media Player cannot find the file. If you try to play, burn, or sync an item that is in your library, the element can point to a file that has been moved, renamed or deleted'

  Original title: laptop won't read the music files stored on external hard drive

  I have an old Compaq laptop Windows XP, so it was out of memory I transferred everything on a Portable Seagate (500 GB) hard drive and started to access it. It's worked well for over a year, but lately, began to stop playing my music files. Absolutely everything on the hard drive opens, however, images, files and folders, but when I go into Windows Media Player, it pops up with this error message:

  Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted.
  I have not modified parameters or anything that moved. I used to be just able to restart the laptop, or disconnect and reconnect the hard drive and it works again, but now it or not will be not at all, or it will cut off half way through a song and then not to play anything more.
  I can't find any support for this problem because the phone reads that the hard drive is there, and everything else works. Only the music doesn't. I tried to play music on a connected USB and it works fine. I'm so confused!
  Hi lkm0293,
   
  Here are some articles that you might find useful:

  Windows Media Player Error Message help

   

  Error message when you type the name of a file to play with Windows Media Player: "Cannot open file."

• Error: "Windows Media Player cannot find the file. If you are trying to play, burn, or synchronize, an item that is in your library, the element can point to a file that has been moved, renamed or deleted'

  Original title: I'm trying to burn a CD and a message keeps coming up saying that Windows Media Player cannot find the file.

  I have Windows XP. I am trying to burn a CD and a message keeps coming up saying: "Windows Media Player cannot find the file.  If you are trying to play, burn, or synchronize, an elements that is in your library, the element can point to a file that has been moved, renaed, or deleted.  I clicked on opations, checked all the network boxes and everything that has been proposed. "My error code is C00D001A.  System cannot find the file specified should I upgrade or find another version of the Windows Media or what.  It's very annoying.  Thanks in advance.

  Hi reginawilson,
   
  Here are some articles that you might find useful:
  Windows Media Player Error Message help
   
  Error message when you type the name of a file to play with Windows Media Player: "Cannot open file."

• media center trying too watch the TV, but message says no tuner available to satisfy the request cannot figure out how fix tuner worked very well

  Media Center does not allow me to watch tv message keeps saying no tuner available to satisfy your request, that I have set up signal again that no change was working fine now not at all

  Hi peace1900,

  • You did it any software or changes to the material on the computer recently?
  • When it was working fine the last time?

  Method 1.
  If your computer has installed TV tuner hardware, follow these steps to resolve the error messages so Media Center can use the tuner driver. After each step, Open Media Center and try to view or to set up live TV. Continue following the steps until the error no longer appears and you can watch TV:
  1. If you use a cable of the card and the computer resumes from a standby or standby mode, wait at least 20 seconds before starting any software that uses the tuner, including Windows Media Center.
  2. restart the computer to Resync to Media Center driver:
  a. Click Start.
  b. click on the arrow in the toolbar and then click on restart.
  c. wait that Windows and all startup items load before you open Windows Media Center.
  3. If you have added a new tuner card, make sure that the tuner card is compatible with Windows 7 Premium or Ultimate. Search for certified for Windows 7 on the product packaging or consult the following website to check the compatibility:
  Microsoft support: Windows 7 Hardware Compatibility List (in English)
  4. change the Windows Media Center Receiver Service specific to a Local System account account name:
  a. click Start , and then type Administrative Tools in the start search box. Click on administrative tools in the search results.
  b. double-click on Services .
  c. scroll to the bottom of the list of Services and find Windows Media Center Receiver Service . You may need to expand the name column by dragging the right side of the column heading.
  d. right-click on Windows Media Center Receiver Service and then click Properties .
  e. click the Connection tab , and then select the Local System account .
  f. click apply and then click OK in the message Services.
  g. restart the computer.
  h. click OK again and restart the computer.

  For more information, see the article below:
  http://support.Microsoft.com/kb/929453

  Method 2: Reinstall the drivers for the tuner:
  1. If you have added a TV tuner card separately, install the drivers that came with the tuner.
  2. If your computer came with Windows 7 Premium and a tuner, reinstall the drivers for the tuner. Click Start, all programs, Recovery Manager, and then click Recovery Manager again.
  If you are prompted, click Yes to continue.
  3. in the Recovery Manager screen, click the hardware driver reinstallation and follow the on-screen instructions to restore the tuner driver.

  Method 3: Install the driver from the manufacturer of the tuner tuner updates:
  If you have added a TV tuner card separately, go to the manufacturer's Web site and install the driver for the tuner updates.

  What should I know before adding TV tuners to use with Windows Media Center?
  http://windowshelp.Microsoft.com/Windows/en-us/help/cf0b2d02-c3df-4369-8fed-ce71398cd11f1033.mspx
   
  Solve problems with watching TV on your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/d4dce2d3-0388-43b1-8880-7d6823d0eb9f1033.mspx#EFEAC
   
  Get help for your TV tuner card
  http://windowshelp.Microsoft.com/Windows/en-us/help/d7ef383d-3342-4C8B-b1ce-5ca64891bc381033.mspx
   
  Method 4: use the system restore to the system at a time where the error has not opened. If you are not familiar with the Microsoft System Restore function,
   
  For more information about system restore, see the following links:
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions
   
  If the system restore does not help to solve the problem, try to uninstall and reinstall the Windows Media Center.
  Method 5.
  Uninstall and reinstall the Windows Media Center:
  Step 1.
  Uninstalling in Windows Media Center:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  2. go to media features and uncheck the brand in the face of Windows Media Center.
  4 restart the computer
  Step 2.
  Reinstall the Windows Media Center:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. find the multimedia functions and place a check mark in front of Windows Media Center.
  4 restart the computer.
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-features-on-or-off

  It will be useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot manage libraries. Cannot retrieve CD using Windows Media Player 12, error '"Windows Media Player cannot find the file'

  Original title: WMP 12 won't fill the library, allow me to manage the libraries, or it is for me to rip music

  WMP 12 is unable to find my music files; When I select > Union > manage libraries > music (or any other library), nothing happens. If I try to extract a new music CD WMP will not let me select a location to store the file torn; If a test of tear, anyway, I get an error message saying WMP "Windows Media Player cannot find the file.

  Through the windows, I can see my music library and that it complements filled with many good things and play music that is then added to the library WMP one track at a time. But that bat rather point to WMP.

  I have added and deleted folders from the libraries of music, I used different hard drives, I used the store to library WMP and I installed and uninstalled and reinstalled WMP three times, I tried using WMP with and without Windows Media Center. Nothing helps. Any ideas?

  Hi Watford CVS,

  Try to enable and disable Windows Media Player and check the result.
  Step 1: Disable Windows Media Player
  a. Click Start, type optionalfeatures and press to enter.
  b. in the list of objects, expand multimedia functions.
  c. uncheck Windows Media Player and click ok.
  d. restart the computer so that the changes take effect.

  Step 2: Turn on Windows Media Player
  a. Click Start, type optionalfeatures and press to enter.
  b. in the list of objects, expand multimedia functions.
  c. place a check on Windows Media Player, and then click ok.
  d. restart the computer so that the changes take effect.
  e. check if the problem persists.

  See Or turn off Windows features turn on

  Visit our Microsoft answers feedback Forum and let us know what you think.